diff mbox series

[4/6] dt-bindings: iio: bma255: Allow multiple interrupts

Message ID 20210610095300.3613-5-stephan@gerhold.net (mailing list archive)
State Superseded
Headers show
Series iio: accel: bmc150: Add support for BMA253/BMA254 | expand

Commit Message

Stephan Gerhold June 10, 2021, 9:52 a.m. UTC 
BMA253 has two interrupt pins (INT1 and INT2) that can be configured
independently. At the moment the bmc150-accel driver does not make use
of them but it might be able to in the future, so it's useful to already
specify all available interrupts in the device tree.

Set maxItems: 2 for interrupts to allow specifying a second one.
This is necessary as preparation to move the bosch,bma254 compatible
from bosch,bma180.yaml to bosch,bma255.yaml since bma180 allows two
interrupts, but BMA254 is better supported by the bmc150-accel driver.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 .../devicetree/bindings/iio/accel/bosch,bma255.yaml        | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
index 8afb0fe8ef5c..65b299a5619b 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -32,7 +32,12 @@  properties:
   vddio-supply: true
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+    description: |
+      The first interrupt listed must be the one connected to the INT1 pin,
+      the second (optional) interrupt listed must be the one connected to the
+      INT2 pin (if available).
 
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix.