| Message ID | 20210801034341.67953-1-navin@linumiz.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/2] iio: temperature: Add MAX31865 RTD Support | expand |
On Sun, 1 Aug 2021 09:13:40 +0530 Navin Sankar Velliangiri <navin@linumiz.com> wrote: > This patch adds support for Maxim MAX31865 RTD temperature > sensor support. > > More information can be found in: > https://datasheets.maximintegrated.com/en/ds/MAX31865.pdf > > Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com> > Change log goes below the --- as we don't want it to get automatically added to the git log going fowards. The link tag which will be added will be fine if anyone wants to find out the history. Otherwise, a few more comments inline. Should be good for v3 :) Jonathan > Note: Changes in v2: > -> removed unnecessary header #include <linux/util_macros.h> > -> implemented mutex to protect the device state > -> Added __cacheline_aligned buffer to hold the raw temperature data > -> implemented separate function to enable_bias() & disable_bias() > -> call max31865_init() func when updating the filter > -> Added ABI documentation for reference & testing > -> dropped spi_set_drvdata() > --- > .../sysfs-bus-iio-temperature-max31865 | 25 ++ > drivers/iio/temperature/Kconfig | 10 + > drivers/iio/temperature/Makefile | 1 + > drivers/iio/temperature/max31865.c | 347 ++++++++++++++++++ > 4 files changed, 383 insertions(+) > create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865 > create mode 100644 drivers/iio/temperature/max31865.c > > diff --git a/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865 b/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865 > new file mode 100644 > index 000000000000..7ca1e09b73f5 > --- /dev/null > +++ b/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865 > @@ -0,0 +1,25 @@ > +What: /sys/bus/iio/devices/iio:deviceX/fault_ovuv > +KernelVersion: 5.11 > +Contact: linux-iio@vger.kernel.org > +Description: > + Overvoltage or Undervoltage Input fault. The internal circuitry > + is protected from excessive voltages applied to the thermocouple > + cables at FORCE+, FORCE2, RTDIN+ & RTDIN-. This circuitry turn > + off when the input voltage is negative or greater than VDD. > + > + Reading returns either '1' or '0' > + > + === ======================================================= > + '1' The input voltage is negative or greater than VDD. > + '0' The input voltage is positive and less than VDD (normal > + state). It's a boolean so we should only need to specify one of these. Reading returns '1' if input voltage negative or greater than VDD, otherwise '0'. Not sure the table is needed. > + === ======================================================= > + > +What: /sys/bus/iio/devices/iio:deviceX/in_temp_filter_notch_frequency > +KernelVersion: 5.11 > +Contact: linux-iio@vger.kernel.org > +Description: > + Notch frequency in Hz for a noise rejection filter. Used i.e for > + line noise rejection. > + > + Valid notch filter values are 50 Hz and 60 Hz. > diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig > index 4df60082c1fa..c9412abca069 100644 > --- a/drivers/iio/temperature/Kconfig > +++ b/drivers/iio/temperature/Kconfig > @@ -128,4 +128,14 @@ config MAX31856 > This driver can also be built as a module. If so, the module > will be called max31856. > > +config MAX31865 > + tristate "MAX31865 RTD to Digital converter" > + depends on SPI > + help > + If you say yes here you get support for MAX31865 > + thermocouple sensor chip connected via SPI. > + > + This driver can also be build as a module. If so, the module > + will be called max31865. > + > endmenu > diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile > index 90c113115422..a8f3187258dc 100644 > --- a/drivers/iio/temperature/Makefile > +++ b/drivers/iio/temperature/Makefile > @@ -8,6 +8,7 @@ obj-$(CONFIG_LTC2983) += ltc2983.o > obj-$(CONFIG_HID_SENSOR_TEMP) += hid-sensor-temperature.o > obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o > obj-$(CONFIG_MAX31856) += max31856.o > +obj-$(CONFIG_MAX31865) += max31865.o > obj-$(CONFIG_MLX90614) += mlx90614.o > obj-$(CONFIG_MLX90632) += mlx90632.o > obj-$(CONFIG_TMP006) += tmp006.o > diff --git a/drivers/iio/temperature/max31865.c b/drivers/iio/temperature/max31865.c > new file mode 100644 > index 000000000000..9a6ee251bb3e > --- /dev/null > +++ b/drivers/iio/temperature/max31865.c > @@ -0,0 +1,347 @@ > +// SPDX-License-Identifier: GPL-2.0-only > + > +/* > + * Copyright (c) Linumiz 2021 > + * > + * max31865.c - Maxim MAX31865 RTD-to-Digital Converter sensor driver > + * > + * Author: Navin Sankar Velliangiri <navin@linumiz.com> > + */ > + > +#include <linux/ctype.h> > +#include <linux/delay.h> > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/module.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/sysfs.h> > +#include <linux/spi/spi.h> > +#include <asm/unaligned.h> > + > +/* > + * The MSB of the register value determines whether the following byte will > + * be written or read. If it is 0, read will follow and if it is 1, write > + * will follow. > + */ > +#define MAX31865_RD_WR_BIT BIT(7) > + > +#define MAX31865_CFG_VBIAS BIT(7) > +#define MAX31865_CFG_1SHOT BIT(5) > +#define MAX31865_3WIRE_RTD BIT(4) > +#define MAX31865_FAULT_STATUS_CLEAR BIT(1) > +#define MAX31865_FILTER_50HZ BIT(0) > + > +/* The MAX31865 registers */ > +#define MAX31865_CFG_REG 0x00 > +#define MAX31865_RTD_MSB 0x01 > +#define MAX31865_FAULT_STATUS 0x07 > + > +#define MAX31865_FAULT_OVUV BIT(2) > + > +static const struct iio_chan_spec max31865_channels[] = { > + { /* RTD Temperature */ > + .type = IIO_TEMP, > + .info_mask_separate = > + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) > + }, > +}; > + > +struct max31865_data { > + struct spi_device *spi; > + struct mutex lock; > + u8 buf[2] ____cacheline_aligned; Needs to be the last element. As it stands, filter_50Hz and three_wire are in the same cacheline. Thus if they were to change whilst DMA was in progress that change might 'disappear'. > + bool filter_50hz; > + bool three_wire; > +}; > + > +static int max31865_read(struct max31865_data *data, u8 reg, > + unsigned int read_size) > +{ > + return spi_write_then_read(data->spi, ®, 1, data->buf, read_size); > +} > + > +static int max31865_write(struct max31865_data *data, size_t len) > +{ > + return spi_write(data->spi, data->buf, len); > +} > + > +static int enable_bias(struct max31865_data *data) > +{ > + u8 cfg; > + int ret; > + > + ret = max31865_read(data, MAX31865_CFG_REG, 1); > + if (ret) > + return ret; > + > + cfg = data->buf[0]; > + > + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; > + data->buf[1] = cfg | MAX31865_CFG_VBIAS; > + > + return max31865_write(data, 2); > +} > + > +static int disable_bias(struct max31865_data *data) > +{ > + u8 cfg; > + int ret; > + > + ret = max31865_read(data, MAX31865_CFG_REG, 1); > + if (ret) > + return ret; > + > + cfg = data->buf[0]; > + cfg &= ~MAX31865_CFG_VBIAS; > + > + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; > + data->buf[1] = cfg; > + > + return max31865_write(data, 2); > +} > + > +static int max31865_rtd_read(struct max31865_data *data, int *val) > +{ > + u8 reg; > + int ret; > + > + /* Enable BIAS to start the conversion */ > + ret = enable_bias(data); > + if (ret) > + return ret; > + > + /* wait 10.5ms before initiating the conversion */ > + msleep(11); > + > + ret = max31865_read(data, MAX31865_CFG_REG, 1); > + if (ret) > + return ret; > + > + reg = data->buf[0]; > + reg |= MAX31865_CFG_1SHOT | MAX31865_FAULT_STATUS_CLEAR; > + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; > + data->buf[1] = reg; > + > + ret = max31865_write(data, 2); > + if (ret) > + return ret; > + > + if (data->filter_50hz) { > + /* 50Hz filter mode requires 62.5ms to complete */ > + msleep(63); > + } else { > + /* 60Hz filter mode requires 52ms to complete */ > + msleep(52); > + } > + > + ret = max31865_read(data, MAX31865_RTD_MSB, 2); > + if (ret) > + return ret; > + > + *val = (data->buf[0] << 8 | data->buf[1]) >> 1; get_unaligned_be16(...) >> 1; preferred as it expresses the semantics of what is going on here. > + > + return disable_bias(data); > +} > + > +static int max31865_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct max31865_data *data = iio_priv(indio_dev); > + int ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + mutex_lock(&data->lock); > + ret = max31865_rtd_read(data, val); > + mutex_unlock(&data->lock); > + if (ret) > + return ret; > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_SCALE: > + /* Temp. Data resolution is 0.03125 degree centigrade */ > + *val = 31; > + *val2 = 250000; /* 1000 * 0.03125 */ > + return IIO_VAL_INT_PLUS_MICRO; > + default: > + return -EINVAL; > + } > +} > + > +static int max31865_init(struct max31865_data *data) > +{ > + u8 cfg; > + int ret; > + > + ret = max31865_read(data, MAX31865_CFG_REG, 1); > + if (ret) > + return ret; > + > + cfg = data->buf[0]; > + > + if (data->three_wire) > + /* 3-wire RTD connection */ > + cfg |= MAX31865_3WIRE_RTD; > + > + if (data->filter_50hz) > + /* 50Hz noise rejection filter */ > + cfg |= MAX31865_FILTER_50HZ; > + > + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; > + data->buf[1] = cfg; > + > + return max31865_write(data, 2); > +} > + > +static ssize_t show_fault(struct device *dev, u8 faultbit, char *buf) > +{ > + int ret; > + bool fault; > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct max31865_data *data = iio_priv(indio_dev); > + > + ret = max31865_read(data, MAX31865_FAULT_STATUS, 1); > + if (ret) > + return ret; > + > + fault = data->buf[0] & faultbit; > + > + return sprintf(buf, "%d\n", fault); > +} > + > +static ssize_t show_fault_ovuv(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + return show_fault(dev, MAX31865_FAULT_OVUV, buf); > +} > + > +static ssize_t show_filter(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct max31865_data *data = iio_priv(indio_dev); > + > + return sprintf(buf, "%d\n", data->filter_50hz ? 50 : 60); > +} > + > +static ssize_t set_filter(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t len) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct max31865_data *data = iio_priv(indio_dev); > + unsigned int freq; > + int ret; > + > + ret = kstrtouint(buf, 10, &freq); > + if (ret) > + return ret; > + > + switch (freq) { > + case 50: > + data->filter_50hz = true; > + break; > + case 60: > + data->filter_50hz = false; > + break; > + default: > + return -EINVAL; > + } > + > + mutex_lock(&data->lock); > + ret = max31865_init(data); If you are calling it somewhere other than init, perhaps the function needs renaming? max31865_config() or something like that? > + mutex_unlock(&data->lock); > + if (ret) > + return ret; > + > + return len; > +} > + > +static IIO_DEVICE_ATTR(fault_ovuv, 0444, show_fault_ovuv, NULL, 0); > +static IIO_DEVICE_ATTR(in_temp_filter_notch_frequency, 0644, > + show_filter, set_filter, 0); > + > +static struct attribute *max31865_attributes[] = { > + &iio_dev_attr_fault_ovuv.dev_attr.attr, > + &iio_dev_attr_in_temp_filter_notch_frequency.dev_attr.attr, Notch filtering is common enough, we should consider adding this as standard ABI supported via a new info_mask element. We could do that as a follow up patch though. Alternatively IIO does have the ext_info support which includes convenient enum macros you might find simplify your implementation of this. I'd expect to also see in_temp_filter_notch_frequency_avail here. > + NULL, > +}; > + > +static const struct attribute_group max31865_group = { > + .attrs = max31865_attributes, > +}; > + > +static const struct iio_info max31865_info = { > + .read_raw = max31865_read_raw, > + .attrs = &max31865_group, > +}; > + > +static int max31865_probe(struct spi_device *spi) > +{ > + const struct spi_device_id *id = spi_get_device_id(spi); > + struct iio_dev *indio_dev; > + struct max31865_data *data; > + int ret; > + > + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data)); > + if (!indio_dev) > + return -ENOMEM; > + > + data = iio_priv(indio_dev); > + data->spi = spi; > + data->filter_50hz = false; > + mutex_init(&data->lock); > + > + indio_dev->info = &max31865_info; > + indio_dev->name = id->name; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->channels = max31865_channels; > + indio_dev->num_channels = ARRAY_SIZE(max31865_channels); > + > + if (of_property_read_bool(spi->dev.of_node, "maxim,3-wire")) { > + /* select 3 wire */ > + data->three_wire = 1; > + } else { > + /* select 2 or 4 wire */ > + data->three_wire = 0; > + } > + > + mutex_lock(&data->lock); > + ret = max31865_init(data); > + mutex_unlock(&data->lock); > + if (ret) { > + dev_err(&spi->dev, "error: Failed to configure max31865\n"); > + return ret; > + } > + > + return devm_iio_device_register(&spi->dev, indio_dev); > +} > + > +static const struct spi_device_id max31865_id[] = { > + { "max31865", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(spi, max31865_id); > + > +static const struct of_device_id max31865_of_match[] = { > + { .compatible = "maxim,max31865" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, max31865_of_match); > + > +static struct spi_driver max31865_driver = { > + .driver = { > + .name = "max31865", > + .of_match_table = max31865_of_match, > + }, > + .probe = max31865_probe, > + .id_table = max31865_id, > +}; > +module_spi_driver(max31865_driver); > + > +MODULE_AUTHOR("Navin Sankar Velliangiri <navin@linumiz.com>"); > +MODULE_DESCRIPTION("Maxim MAX31865 RTD-to-Digital Converter sensor driver"); > +MODULE_LICENSE("GPL v2");
On Sun, Aug 1, 2021 at 7:06 AM Navin Sankar Velliangiri <navin@linumiz.com> wrote: > > This patch adds support for Maxim MAX31865 RTD temperature > sensor support. > > More information can be found in: > https://datasheets.maximintegrated.com/en/ds/MAX31865.pdf > > Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com> > > Note: Changes in v2: > -> removed unnecessary header #include <linux/util_macros.h> > -> implemented mutex to protect the device state > -> Added __cacheline_aligned buffer to hold the raw temperature data > -> implemented separate function to enable_bias() & disable_bias() > -> call max31865_init() func when updating the filter > -> Added ABI documentation for reference & testing > -> dropped spi_set_drvdata() > --- > .../sysfs-bus-iio-temperature-max31865 | 25 ++ > drivers/iio/temperature/Kconfig | 10 + > drivers/iio/temperature/Makefile | 1 + > drivers/iio/temperature/max31865.c | 347 ++++++++++++++++++ > 4 files changed, 383 insertions(+) > create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865 > create mode 100644 drivers/iio/temperature/max31865.c > > diff --git a/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865 b/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865 > new file mode 100644 > index 000000000000..7ca1e09b73f5 > --- /dev/null > +++ b/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865 > @@ -0,0 +1,25 @@ > +What: /sys/bus/iio/devices/iio:deviceX/fault_ovuv > +KernelVersion: 5.11 > +Contact: linux-iio@vger.kernel.org > +Description: > + Overvoltage or Undervoltage Input fault. The internal circuitry > + is protected from excessive voltages applied to the thermocouple > + cables at FORCE+, FORCE2, RTDIN+ & RTDIN-. This circuitry turn > + off when the input voltage is negative or greater than VDD. > + > + Reading returns either '1' or '0' > + > + === ======================================================= > + '1' The input voltage is negative or greater than VDD. > + '0' The input voltage is positive and less than VDD (normal > + state). > + === ======================================================= > + > +What: /sys/bus/iio/devices/iio:deviceX/in_temp_filter_notch_frequency > +KernelVersion: 5.11 > +Contact: linux-iio@vger.kernel.org > +Description: > + Notch frequency in Hz for a noise rejection filter. Used i.e for > + line noise rejection. > + > + Valid notch filter values are 50 Hz and 60 Hz. > diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig > index 4df60082c1fa..c9412abca069 100644 > --- a/drivers/iio/temperature/Kconfig > +++ b/drivers/iio/temperature/Kconfig > @@ -128,4 +128,14 @@ config MAX31856 > This driver can also be built as a module. If so, the module > will be called max31856. > > +config MAX31865 > + tristate "MAX31865 RTD to Digital converter" > + depends on SPI > + help > + If you say yes here you get support for MAX31865 > + thermocouple sensor chip connected via SPI. > + > + This driver can also be build as a module. If so, the module > + will be called max31865. > + > endmenu > diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile > index 90c113115422..a8f3187258dc 100644 > --- a/drivers/iio/temperature/Makefile > +++ b/drivers/iio/temperature/Makefile > @@ -8,6 +8,7 @@ obj-$(CONFIG_LTC2983) += ltc2983.o > obj-$(CONFIG_HID_SENSOR_TEMP) += hid-sensor-temperature.o > obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o > obj-$(CONFIG_MAX31856) += max31856.o > +obj-$(CONFIG_MAX31865) += max31865.o > obj-$(CONFIG_MLX90614) += mlx90614.o > obj-$(CONFIG_MLX90632) += mlx90632.o > obj-$(CONFIG_TMP006) += tmp006.o > diff --git a/drivers/iio/temperature/max31865.c b/drivers/iio/temperature/max31865.c > new file mode 100644 > index 000000000000..9a6ee251bb3e > --- /dev/null > +++ b/drivers/iio/temperature/max31865.c > @@ -0,0 +1,347 @@ > +// SPDX-License-Identifier: GPL-2.0-only > + > +/* > + * Copyright (c) Linumiz 2021 > + * > + * max31865.c - Maxim MAX31865 RTD-to-Digital Converter sensor driver > + * > + * Author: Navin Sankar Velliangiri <navin@linumiz.com> > + */ > + > +#include <linux/ctype.h> > +#include <linux/delay.h> > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/module.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/sysfs.h> > +#include <linux/spi/spi.h> > +#include <asm/unaligned.h> > + > +/* > + * The MSB of the register value determines whether the following byte will > + * be written or read. If it is 0, read will follow and if it is 1, write > + * will follow. > + */ > +#define MAX31865_RD_WR_BIT BIT(7) > + > +#define MAX31865_CFG_VBIAS BIT(7) > +#define MAX31865_CFG_1SHOT BIT(5) > +#define MAX31865_3WIRE_RTD BIT(4) > +#define MAX31865_FAULT_STATUS_CLEAR BIT(1) > +#define MAX31865_FILTER_50HZ BIT(0) > + > +/* The MAX31865 registers */ > +#define MAX31865_CFG_REG 0x00 > +#define MAX31865_RTD_MSB 0x01 > +#define MAX31865_FAULT_STATUS 0x07 > + > +#define MAX31865_FAULT_OVUV BIT(2) > + > +static const struct iio_chan_spec max31865_channels[] = { > + { /* RTD Temperature */ > + .type = IIO_TEMP, > + .info_mask_separate = > + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) > + }, > +}; > + > +struct max31865_data { > + struct spi_device *spi; > + struct mutex lock; > + u8 buf[2] ____cacheline_aligned; > + bool filter_50hz; > + bool three_wire; > +}; > + > +static int max31865_read(struct max31865_data *data, u8 reg, > + unsigned int read_size) > +{ > + return spi_write_then_read(data->spi, ®, 1, data->buf, read_size); > +} > + > +static int max31865_write(struct max31865_data *data, size_t len) > +{ > + return spi_write(data->spi, data->buf, len); > +} > + > +static int enable_bias(struct max31865_data *data) > +{ > + u8 cfg; > + int ret; > + > + ret = max31865_read(data, MAX31865_CFG_REG, 1); > + if (ret) > + return ret; > + > + cfg = data->buf[0]; > + > + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; > + data->buf[1] = cfg | MAX31865_CFG_VBIAS; > + > + return max31865_write(data, 2); > +} > + > +static int disable_bias(struct max31865_data *data) > +{ > + u8 cfg; > + int ret; > + > + ret = max31865_read(data, MAX31865_CFG_REG, 1); > + if (ret) > + return ret; > + > + cfg = data->buf[0]; > + cfg &= ~MAX31865_CFG_VBIAS; > + > + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; > + data->buf[1] = cfg; > + > + return max31865_write(data, 2); > +} > + > +static int max31865_rtd_read(struct max31865_data *data, int *val) > +{ > + u8 reg; > + int ret; > + > + /* Enable BIAS to start the conversion */ > + ret = enable_bias(data); > + if (ret) > + return ret; > + > + /* wait 10.5ms before initiating the conversion */ > + msleep(11); > + > + ret = max31865_read(data, MAX31865_CFG_REG, 1); > + if (ret) > + return ret; > + > + reg = data->buf[0]; > + reg |= MAX31865_CFG_1SHOT | MAX31865_FAULT_STATUS_CLEAR; > + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; > + data->buf[1] = reg; > + > + ret = max31865_write(data, 2); > + if (ret) > + return ret; > + > + if (data->filter_50hz) { > + /* 50Hz filter mode requires 62.5ms to complete */ > + msleep(63); > + } else { > + /* 60Hz filter mode requires 52ms to complete */ > + msleep(52); > + } > + > + ret = max31865_read(data, MAX31865_RTD_MSB, 2); > + if (ret) > + return ret; > + > + *val = (data->buf[0] << 8 | data->buf[1]) >> 1; > + > + return disable_bias(data); > +} > + > +static int max31865_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct max31865_data *data = iio_priv(indio_dev); > + int ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + mutex_lock(&data->lock); > + ret = max31865_rtd_read(data, val); > + mutex_unlock(&data->lock); > + if (ret) > + return ret; > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_SCALE: > + /* Temp. Data resolution is 0.03125 degree centigrade */ > + *val = 31; > + *val2 = 250000; /* 1000 * 0.03125 */ > + return IIO_VAL_INT_PLUS_MICRO; > + default: > + return -EINVAL; > + } > +} > + > +static int max31865_init(struct max31865_data *data) > +{ > + u8 cfg; > + int ret; > + > + ret = max31865_read(data, MAX31865_CFG_REG, 1); > + if (ret) > + return ret; > + > + cfg = data->buf[0]; > + > + if (data->three_wire) > + /* 3-wire RTD connection */ > + cfg |= MAX31865_3WIRE_RTD; > + > + if (data->filter_50hz) > + /* 50Hz noise rejection filter */ > + cfg |= MAX31865_FILTER_50HZ; > + > + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; > + data->buf[1] = cfg; > + > + return max31865_write(data, 2); > +} > + > +static ssize_t show_fault(struct device *dev, u8 faultbit, char *buf) > +{ > + int ret; > + bool fault; > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct max31865_data *data = iio_priv(indio_dev); > + > + ret = max31865_read(data, MAX31865_FAULT_STATUS, 1); > + if (ret) > + return ret; > + > + fault = data->buf[0] & faultbit; > + > + return sprintf(buf, "%d\n", fault); > +} > + > +static ssize_t show_fault_ovuv(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + return show_fault(dev, MAX31865_FAULT_OVUV, buf); > +} > + > +static ssize_t show_filter(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct max31865_data *data = iio_priv(indio_dev); > + > + return sprintf(buf, "%d\n", data->filter_50hz ? 50 : 60); > +} > + > +static ssize_t set_filter(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t len) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct max31865_data *data = iio_priv(indio_dev); > + unsigned int freq; > + int ret; > + > + ret = kstrtouint(buf, 10, &freq); > + if (ret) > + return ret; > + > + switch (freq) { > + case 50: > + data->filter_50hz = true; > + break; > + case 60: > + data->filter_50hz = false; > + break; > + default: > + return -EINVAL; > + } > + > + mutex_lock(&data->lock); > + ret = max31865_init(data); > + mutex_unlock(&data->lock); > + if (ret) > + return ret; > + > + return len; > +} > + > +static IIO_DEVICE_ATTR(fault_ovuv, 0444, show_fault_ovuv, NULL, 0); > +static IIO_DEVICE_ATTR(in_temp_filter_notch_frequency, 0644, > + show_filter, set_filter, 0); > + > +static struct attribute *max31865_attributes[] = { > + &iio_dev_attr_fault_ovuv.dev_attr.attr, > + &iio_dev_attr_in_temp_filter_notch_frequency.dev_attr.attr, > + NULL, > +}; > + > +static const struct attribute_group max31865_group = { > + .attrs = max31865_attributes, > +}; > + > +static const struct iio_info max31865_info = { > + .read_raw = max31865_read_raw, > + .attrs = &max31865_group, > +}; > + > +static int max31865_probe(struct spi_device *spi) > +{ > + const struct spi_device_id *id = spi_get_device_id(spi); > + struct iio_dev *indio_dev; > + struct max31865_data *data; > + int ret; > + > + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data)); > + if (!indio_dev) > + return -ENOMEM; > + > + data = iio_priv(indio_dev); > + data->spi = spi; > + data->filter_50hz = false; > + mutex_init(&data->lock); > + > + indio_dev->info = &max31865_info; > + indio_dev->name = id->name; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->channels = max31865_channels; > + indio_dev->num_channels = ARRAY_SIZE(max31865_channels); > + > + if (of_property_read_bool(spi->dev.of_node, "maxim,3-wire")) { > + /* select 3 wire */ > + data->three_wire = 1; > + } else { > + /* select 2 or 4 wire */ > + data->three_wire = 0; > + } > + > + mutex_lock(&data->lock); > + ret = max31865_init(data); > + mutex_unlock(&data->lock); There aren't any changes for race-conditions here. There is no userspace access to the device yet (before devm_iio_device_register() is being called). So, the locking can be removed [here] in probe(). > + if (ret) { > + dev_err(&spi->dev, "error: Failed to configure max31865\n"); > + return ret; > + } > + > + return devm_iio_device_register(&spi->dev, indio_dev); > +} > + > +static const struct spi_device_id max31865_id[] = { > + { "max31865", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(spi, max31865_id); > + > +static const struct of_device_id max31865_of_match[] = { > + { .compatible = "maxim,max31865" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, max31865_of_match); > + > +static struct spi_driver max31865_driver = { > + .driver = { > + .name = "max31865", > + .of_match_table = max31865_of_match, > + }, > + .probe = max31865_probe, > + .id_table = max31865_id, > +}; > +module_spi_driver(max31865_driver); > + > +MODULE_AUTHOR("Navin Sankar Velliangiri <navin@linumiz.com>"); > +MODULE_DESCRIPTION("Maxim MAX31865 RTD-to-Digital Converter sensor driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.32.0 >
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865 b/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865 new file mode 100644 index 000000000000..7ca1e09b73f5 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865 @@ -0,0 +1,25 @@ +What: /sys/bus/iio/devices/iio:deviceX/fault_ovuv +KernelVersion: 5.11 +Contact: linux-iio@vger.kernel.org +Description: + Overvoltage or Undervoltage Input fault. The internal circuitry + is protected from excessive voltages applied to the thermocouple + cables at FORCE+, FORCE2, RTDIN+ & RTDIN-. This circuitry turn + off when the input voltage is negative or greater than VDD. + + Reading returns either '1' or '0' + + === ======================================================= + '1' The input voltage is negative or greater than VDD. + '0' The input voltage is positive and less than VDD (normal + state). + === ======================================================= + +What: /sys/bus/iio/devices/iio:deviceX/in_temp_filter_notch_frequency +KernelVersion: 5.11 +Contact: linux-iio@vger.kernel.org +Description: + Notch frequency in Hz for a noise rejection filter. Used i.e for + line noise rejection. + + Valid notch filter values are 50 Hz and 60 Hz. diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig index 4df60082c1fa..c9412abca069 100644 --- a/drivers/iio/temperature/Kconfig +++ b/drivers/iio/temperature/Kconfig @@ -128,4 +128,14 @@ config MAX31856 This driver can also be built as a module. If so, the module will be called max31856. +config MAX31865 + tristate "MAX31865 RTD to Digital converter" + depends on SPI + help + If you say yes here you get support for MAX31865 + thermocouple sensor chip connected via SPI. + + This driver can also be build as a module. If so, the module + will be called max31865. + endmenu diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile index 90c113115422..a8f3187258dc 100644 --- a/drivers/iio/temperature/Makefile +++ b/drivers/iio/temperature/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_LTC2983) += ltc2983.o obj-$(CONFIG_HID_SENSOR_TEMP) += hid-sensor-temperature.o obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o obj-$(CONFIG_MAX31856) += max31856.o +obj-$(CONFIG_MAX31865) += max31865.o obj-$(CONFIG_MLX90614) += mlx90614.o obj-$(CONFIG_MLX90632) += mlx90632.o obj-$(CONFIG_TMP006) += tmp006.o diff --git a/drivers/iio/temperature/max31865.c b/drivers/iio/temperature/max31865.c new file mode 100644 index 000000000000..9a6ee251bb3e --- /dev/null +++ b/drivers/iio/temperature/max31865.c @@ -0,0 +1,347 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Copyright (c) Linumiz 2021 + * + * max31865.c - Maxim MAX31865 RTD-to-Digital Converter sensor driver + * + * Author: Navin Sankar Velliangiri <navin@linumiz.com> + */ + +#include <linux/ctype.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/spi/spi.h> +#include <asm/unaligned.h> + +/* + * The MSB of the register value determines whether the following byte will + * be written or read. If it is 0, read will follow and if it is 1, write + * will follow. + */ +#define MAX31865_RD_WR_BIT BIT(7) + +#define MAX31865_CFG_VBIAS BIT(7) +#define MAX31865_CFG_1SHOT BIT(5) +#define MAX31865_3WIRE_RTD BIT(4) +#define MAX31865_FAULT_STATUS_CLEAR BIT(1) +#define MAX31865_FILTER_50HZ BIT(0) + +/* The MAX31865 registers */ +#define MAX31865_CFG_REG 0x00 +#define MAX31865_RTD_MSB 0x01 +#define MAX31865_FAULT_STATUS 0x07 + +#define MAX31865_FAULT_OVUV BIT(2) + +static const struct iio_chan_spec max31865_channels[] = { + { /* RTD Temperature */ + .type = IIO_TEMP, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) + }, +}; + +struct max31865_data { + struct spi_device *spi; + struct mutex lock; + u8 buf[2] ____cacheline_aligned; + bool filter_50hz; + bool three_wire; +}; + +static int max31865_read(struct max31865_data *data, u8 reg, + unsigned int read_size) +{ + return spi_write_then_read(data->spi, ®, 1, data->buf, read_size); +} + +static int max31865_write(struct max31865_data *data, size_t len) +{ + return spi_write(data->spi, data->buf, len); +} + +static int enable_bias(struct max31865_data *data) +{ + u8 cfg; + int ret; + + ret = max31865_read(data, MAX31865_CFG_REG, 1); + if (ret) + return ret; + + cfg = data->buf[0]; + + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; + data->buf[1] = cfg | MAX31865_CFG_VBIAS; + + return max31865_write(data, 2); +} + +static int disable_bias(struct max31865_data *data) +{ + u8 cfg; + int ret; + + ret = max31865_read(data, MAX31865_CFG_REG, 1); + if (ret) + return ret; + + cfg = data->buf[0]; + cfg &= ~MAX31865_CFG_VBIAS; + + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; + data->buf[1] = cfg; + + return max31865_write(data, 2); +} + +static int max31865_rtd_read(struct max31865_data *data, int *val) +{ + u8 reg; + int ret; + + /* Enable BIAS to start the conversion */ + ret = enable_bias(data); + if (ret) + return ret; + + /* wait 10.5ms before initiating the conversion */ + msleep(11); + + ret = max31865_read(data, MAX31865_CFG_REG, 1); + if (ret) + return ret; + + reg = data->buf[0]; + reg |= MAX31865_CFG_1SHOT | MAX31865_FAULT_STATUS_CLEAR; + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; + data->buf[1] = reg; + + ret = max31865_write(data, 2); + if (ret) + return ret; + + if (data->filter_50hz) { + /* 50Hz filter mode requires 62.5ms to complete */ + msleep(63); + } else { + /* 60Hz filter mode requires 52ms to complete */ + msleep(52); + } + + ret = max31865_read(data, MAX31865_RTD_MSB, 2); + if (ret) + return ret; + + *val = (data->buf[0] << 8 | data->buf[1]) >> 1; + + return disable_bias(data); +} + +static int max31865_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct max31865_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&data->lock); + ret = max31865_rtd_read(data, val); + mutex_unlock(&data->lock); + if (ret) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + /* Temp. Data resolution is 0.03125 degree centigrade */ + *val = 31; + *val2 = 250000; /* 1000 * 0.03125 */ + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int max31865_init(struct max31865_data *data) +{ + u8 cfg; + int ret; + + ret = max31865_read(data, MAX31865_CFG_REG, 1); + if (ret) + return ret; + + cfg = data->buf[0]; + + if (data->three_wire) + /* 3-wire RTD connection */ + cfg |= MAX31865_3WIRE_RTD; + + if (data->filter_50hz) + /* 50Hz noise rejection filter */ + cfg |= MAX31865_FILTER_50HZ; + + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; + data->buf[1] = cfg; + + return max31865_write(data, 2); +} + +static ssize_t show_fault(struct device *dev, u8 faultbit, char *buf) +{ + int ret; + bool fault; + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct max31865_data *data = iio_priv(indio_dev); + + ret = max31865_read(data, MAX31865_FAULT_STATUS, 1); + if (ret) + return ret; + + fault = data->buf[0] & faultbit; + + return sprintf(buf, "%d\n", fault); +} + +static ssize_t show_fault_ovuv(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return show_fault(dev, MAX31865_FAULT_OVUV, buf); +} + +static ssize_t show_filter(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct max31865_data *data = iio_priv(indio_dev); + + return sprintf(buf, "%d\n", data->filter_50hz ? 50 : 60); +} + +static ssize_t set_filter(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct max31865_data *data = iio_priv(indio_dev); + unsigned int freq; + int ret; + + ret = kstrtouint(buf, 10, &freq); + if (ret) + return ret; + + switch (freq) { + case 50: + data->filter_50hz = true; + break; + case 60: + data->filter_50hz = false; + break; + default: + return -EINVAL; + } + + mutex_lock(&data->lock); + ret = max31865_init(data); + mutex_unlock(&data->lock); + if (ret) + return ret; + + return len; +} + +static IIO_DEVICE_ATTR(fault_ovuv, 0444, show_fault_ovuv, NULL, 0); +static IIO_DEVICE_ATTR(in_temp_filter_notch_frequency, 0644, + show_filter, set_filter, 0); + +static struct attribute *max31865_attributes[] = { + &iio_dev_attr_fault_ovuv.dev_attr.attr, + &iio_dev_attr_in_temp_filter_notch_frequency.dev_attr.attr, + NULL, +}; + +static const struct attribute_group max31865_group = { + .attrs = max31865_attributes, +}; + +static const struct iio_info max31865_info = { + .read_raw = max31865_read_raw, + .attrs = &max31865_group, +}; + +static int max31865_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + struct iio_dev *indio_dev; + struct max31865_data *data; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->spi = spi; + data->filter_50hz = false; + mutex_init(&data->lock); + + indio_dev->info = &max31865_info; + indio_dev->name = id->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = max31865_channels; + indio_dev->num_channels = ARRAY_SIZE(max31865_channels); + + if (of_property_read_bool(spi->dev.of_node, "maxim,3-wire")) { + /* select 3 wire */ + data->three_wire = 1; + } else { + /* select 2 or 4 wire */ + data->three_wire = 0; + } + + mutex_lock(&data->lock); + ret = max31865_init(data); + mutex_unlock(&data->lock); + if (ret) { + dev_err(&spi->dev, "error: Failed to configure max31865\n"); + return ret; + } + + return devm_iio_device_register(&spi->dev, indio_dev); +} + +static const struct spi_device_id max31865_id[] = { + { "max31865", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, max31865_id); + +static const struct of_device_id max31865_of_match[] = { + { .compatible = "maxim,max31865" }, + { } +}; +MODULE_DEVICE_TABLE(of, max31865_of_match); + +static struct spi_driver max31865_driver = { + .driver = { + .name = "max31865", + .of_match_table = max31865_of_match, + }, + .probe = max31865_probe, + .id_table = max31865_id, +}; +module_spi_driver(max31865_driver); + +MODULE_AUTHOR("Navin Sankar Velliangiri <navin@linumiz.com>"); +MODULE_DESCRIPTION("Maxim MAX31865 RTD-to-Digital Converter sensor driver"); +MODULE_LICENSE("GPL v2");
This patch adds support for Maxim MAX31865 RTD temperature sensor support. More information can be found in: https://datasheets.maximintegrated.com/en/ds/MAX31865.pdf Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com> Note: Changes in v2: -> removed unnecessary header #include <linux/util_macros.h> -> implemented mutex to protect the device state -> Added __cacheline_aligned buffer to hold the raw temperature data -> implemented separate function to enable_bias() & disable_bias() -> call max31865_init() func when updating the filter -> Added ABI documentation for reference & testing -> dropped spi_set_drvdata() --- .../sysfs-bus-iio-temperature-max31865 | 25 ++ drivers/iio/temperature/Kconfig | 10 + drivers/iio/temperature/Makefile | 1 + drivers/iio/temperature/max31865.c | 347 ++++++++++++++++++ 4 files changed, 383 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865 create mode 100644 drivers/iio/temperature/max31865.c