@@ -130,7 +130,7 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
- *val = data->model_data->vref_fixed_mv;
+ *val = data->vref_mv;
*val2 = ASPEED_RESOLUTION_BITS;
return IIO_VAL_FRACTIONAL_LOG2;
@@ -195,6 +195,17 @@ static const struct iio_info aspeed_adc_iio_info = {
.debugfs_reg_access = aspeed_adc_reg_access,
};
+static int aspeed_adc_vref_config(struct iio_dev *indio_dev)
+{
+ struct aspeed_adc_data *data = iio_priv(indio_dev);
+
+ if (data->model_data->vref_fixed_mv) {
+ data->vref_mv = data->model_data->vref_fixed_mv;
+ return 0;
+ }
+ return 0;
+}
+
static int aspeed_adc_probe(struct platform_device *pdev)
{
struct iio_dev *indio_dev;
@@ -250,6 +261,10 @@ static int aspeed_adc_probe(struct platform_device *pdev)
}
reset_control_deassert(data->rst);
+ ret = aspeed_adc_vref_config(indio_dev);
+ if (ret)
+ goto vref_config_error;
+
if (data->model_data->wait_init_sequence) {
/* Enable engine in normal mode. */
writel(FIELD_PREP(ASPEED_ADC_OP_MODE,
@@ -298,6 +313,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
clk_disable_unprepare(data->clk_scaler->clk);
clk_enable_error:
poll_timeout_error:
+vref_config_error:
reset_control_assert(data->rst);
reset_error:
clk_hw_unregister_divider(data->clk_scaler);
Add the function to check the vref_fixed_mv and set the value to driver data. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- drivers/iio/adc/aspeed_adc.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)