| Message ID | 20211022161612.000026f6@Huawei.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [PULL] 2nd set of IIO new device support, features, cleanup for 5.16 | expand |
On Fri, Oct 22, 2021 at 04:16:12PM +0100, Jonathan Cameron wrote: > The following changes since commit 8135cc5b270b3f224615bdee8bd7d66afee87991: > > MAINTAINERS: Update the entry for MHI bus (2021-10-19 15:49:14 +0200) > > are available in the Git repository at: > > https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.16b Pulled and pushed out, thanks. greg k-h
The following changes since commit 8135cc5b270b3f224615bdee8bd7d66afee87991: MAINTAINERS: Update the entry for MHI bus (2021-10-19 15:49:14 +0200) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.16b for you to fetch changes up to 77af145dc7eadcb78d38912b67d6a68050d21a9b: dt-bindings: iio: frequency: add adrf6780 doc (2021-10-21 21:00:59 +0100) ---------------------------------------------------------------- 2nd set of IIO new driver, cleanups and features for the 5.16 cycle New device support * adrf6780 microwave upconverter. - New driver for this interesting device including bindings. Features * lite-on ltr501 - Add dt-bindings including vendor ID and of_device_id table. - Add regulator support. * sensiron,scd4x - Add reporting of channel scale. Cleanups including fixes for things in this cycle * Tree wide: Another set of dev_err_probe() introductions to reduce noise in logs when deferred probing is needed and provide more debug info. Devices included this time: - amlogic,meson_saradc - capella,cm3605 - fsl,imx7d - maxim,max1118 - maxim,max1241 - nxp,lpc18xx - qcom,pm8xxxx-xoadc - rockchip,saradc - sharp,gp2ap002 - sterricson,ab8500 - ti,ads7950 * core - iio:buffer - Fix a path where a ret value is not intialized. * channel-mux - Add support to mux core subsystem for a settling delay and use it in the iio-channel-mux driver. - Fix a few dt binding warnings. * nxp,lpc18xx - Convert to devm_ functions for all of probe and drop remove() * st,lsm6dsx - Suppress a warning due to lack of handling of an enum *_MAX entry that is just there to get the size. * st,stm32-adc - Add generic channel binding, deprecating the old approach. - Add nvmem support to get calibration data for the vrefint channel and use it to perform such calibration. - Add a binding for sample-time to the generic channel description as it can be per channel. * ti,adc128s052 - Use devm_ managed functions and drop remove() * vti,sca3000 - Use sign_extend32() rather than opencoding. * xilinx,xadc - Drop irq field from state structure as now just used in probe. ---------------------------------------------------------------- André Gustavo Nakagomi Lopez (1): iio: adc: lpc18xx_adc: Convert probe to device managed version Antoniu Miclaus (2): iio: frequency: adrf6780: add support for ADRF6780 dt-bindings: iio: frequency: add adrf6780 doc Cai Huoqing (11): iio: adc: ab8500-gpadc: Make use of the helper function dev_err_probe() iio: adc: imx7d_adc: Make use of the helper function dev_err_probe() iio: adc: lpc18xx_adc: Make use of the helper function dev_err_probe() iio: adc: max1118: Make use of the helper function dev_err_probe() iio: adc: max1241: Make use of the helper function dev_err_probe() iio: adc: meson_saradc: Make use of the helper function dev_err_probe() iio: adc: qcom-pm8xxx-xoadc: Make use of the helper function dev_err_probe() iio: adc: rockchip_saradc: Make use of the helper function dev_err_probe() iio: adc: ti-ads7950: Make use of the helper function dev_err_probe() iio: light: cm3605: Make use of the helper function dev_err_probe() iio: light: gp2ap002: Make use of the helper function dev_err_probe() Christophe JAILLET (1): iio: adc: adc128s052: Simplify adc128_probe() Colin Ian King (1): iio: buffer: Fix uninitialized variable ret Jonathan Cameron (1): iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension. Lars-Peter Clausen (1): iio: xilinx-xadc: Remove `irq` field from state struct Nikita Travkin (4): dt-bindings: vendor-prefixes: Document liteon vendor prefix dt-bindings: iio: light: Document ltr501 light sensor bindings iio: light: ltr501: Add rudimentary regulator support iio: light: ltr501: Add of_device_id table Olivier Moysan (7): dt-bindings: iio: stm32-adc: add generic channel binding dt-bindings: iio: stm32-adc: add nvmem support for vrefint internal channel iio: adc: stm32-adc: split channel init into several routines iio: adc: stm32-adc: add support of generic channels binding iio: adc: stm32-adc: add support of internal channels iio: adc: stm32-adc: add vrefint calibration support iio: adc: stm32-adc: use generic binding for sample-time Peter Rosin (2): dt-bindings: iio: io-channel-mux: add optional #io-channel-cells dt-bindings: iio: io-channel-mux: allow duplicate channel, labels Roan van Dijk (1): iio: chemical: scd4x: Add a scale for the co2 concentration reading Teng Qi (1): iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr() Vincent Whitchurch (3): mux: add support for delay after muxing dt-bindings: iio: io-channel-mux: Add property for settle time iio: multiplexer: iio-mux: Support settle-time-us property .../devicetree/bindings/iio/adc/st,stm32-adc.yaml | 108 ++++- .../bindings/iio/frequency/adi,adrf6780.yaml | 131 +++++ .../bindings/iio/light/liteon,ltr501.yaml | 51 ++ .../bindings/iio/multiplexer/io-channel-mux.yaml | 13 +- .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/iio/accel/sca3000.c | 3 +- drivers/iio/adc/ab8500-gpadc.c | 22 +- drivers/iio/adc/imx7d_adc.c | 18 +- drivers/iio/adc/lpc18xx_adc.c | 75 ++- drivers/iio/adc/max1118.c | 7 +- drivers/iio/adc/max1241.c | 17 +- drivers/iio/adc/meson_saradc.c | 39 +- drivers/iio/adc/qcom-pm8xxx-xoadc.c | 9 +- drivers/iio/adc/rockchip_saradc.c | 27 +- drivers/iio/adc/stm32-adc-core.c | 1 + drivers/iio/adc/stm32-adc-core.h | 10 + drivers/iio/adc/stm32-adc.c | 422 +++++++++++++++-- drivers/iio/adc/ti-adc128s052.c | 33 +- drivers/iio/adc/ti-ads7950.c | 4 +- drivers/iio/adc/xilinx-xadc-core.c | 5 +- drivers/iio/adc/xilinx-xadc.h | 1 - drivers/iio/chemical/scd4x.c | 9 +- drivers/iio/frequency/Kconfig | 12 + drivers/iio/frequency/Makefile | 1 + drivers/iio/frequency/adrf6780.c | 527 +++++++++++++++++++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 6 +- drivers/iio/industrialio-buffer.c | 2 +- drivers/iio/light/cm3605.c | 29 +- drivers/iio/light/gp2ap002.c | 24 +- drivers/iio/light/ltr501.c | 37 ++ drivers/iio/multiplexer/iio-mux.c | 7 +- drivers/mux/core.c | 38 +- include/linux/mux/consumer.h | 23 +- include/linux/mux/driver.h | 4 + 34 files changed, 1467 insertions(+), 250 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml create mode 100644 drivers/iio/frequency/adrf6780.c