| Message ID | 20211104071303.3604314-4-gwendal@chromium.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Expand Semtech SAR Sensors support | expand |
In v3, I will disable/enable irq in suspend/resume. On Thu, Nov 4, 2021 at 12:13 AM Gwendal Grignou <gwendal@chromium.org> wrote: > > Semtech SAR sensor SX9324 is an evolution of the SX9310: > It has 4 phases that can be configure to capture and process data > from any of 3 CS pins and provide independent detection: > proximity, table proximity or body proximity. > > Gather antenna data: > echo sx9324-dev3 > trigger/current_trigger > echo 1 > scan_elements/in_proximity0_en > echo 1 > buffer/enable > od -v -An --endian=big -t d2 -w2 /dev/iio\:device3 > (at 10Hz, the default). > > Trigger events: > Setting: > thresh_falling_period: 2 (events) > thresh_rising_period: 2 (events) > in_proximity0_thresh_either_value: 300 > in_proximity0_thresh_either_hysteresis: 72 > > using iio_event_monitor /dev/iio\:deviceX, approaching my hand to the > antenna pad, I see: > ... > Event: time: 1634763907532035297, type: proximity, channel: 0, evtype: > thresh, direction: falling > Event: time: 1634763910138104640, type: proximity, channel: 0, evtype: > thresh, direction: rising > ... > > Signed-off-by: Gwendal Grignou <gwendal@chromium.org> > --- > Changes in v2: > - Use new interface with sx_common. > - Document phase configuration parameter. > - Define phase configuration parameter in channel. > - Only Add needed changes in Kconfig and Makefile. > - Use read_avail to define available frequencies > > .../ABI/testing/sysfs-bus-iio-sx9324 | 29 + > drivers/iio/proximity/Kconfig | 14 + > drivers/iio/proximity/Makefile | 1 + > drivers/iio/proximity/sx9324.c | 931 ++++++++++++++++++ > 4 files changed, 975 insertions(+) > create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sx9324 > create mode 100644 drivers/iio/proximity/sx9324.c > > diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sx9324 b/Documentation/ABI/testing/sysfs-bus-iio-sx9324 > new file mode 100644 > index 0000000000000..df018e9ee685f > --- /dev/null > +++ b/Documentation/ABI/testing/sysfs-bus-iio-sx9324 > @@ -0,0 +1,29 @@ > +What: /sys/bus/iio/devices/iio:deviceX/in_proximity<id>_setup > +Date: November 2021 > +KernelVersion: 5.14 > +Contact: Gwendal Grignou <gwendal@chromium.org> > +Description: > + SX9324 has 3 inputs, CS0, CS1 and CS2. Hardware layout > + defines if the input is > + + not connected (HZ), > + + grounded (GD), > + + connected to an antenna where it can act as a base > + (DS - data shield), or measured input (MI). > + > + The sensor rotates measurement across 4 phases > + (PH0, PH1, PH2, PH3), where the inputs are configured > + and then measured. > + > + By default, during the first phase, [PH0], CS0 is measured, > + while CS1 and CS2 are used as shields. > + `cat in_proximity0_setup` returns "MI,DS,DS". > + [PH1], CS1 is measured, CS0 and CS2 are shield: > + `cat in_proximity1_setup` returns "DS,MI,DS". > + [PH2], CS2 is measured, CS0 and CS1 are shield: > + `cat in_proximity1_setup` returns "DS,DS,MI". > + [PH3], CS1 and CS2 are measured (combo mode): > + `cat in_proximity1_setup` returns "DS,MI,MI". > + > + Note, these are the chip default. Hardware layout will most > + likely dictate different output. The entry is read-only. > + > diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig > index e88fc373c2c90..aaddf97f9b219 100644 > --- a/drivers/iio/proximity/Kconfig > +++ b/drivers/iio/proximity/Kconfig > @@ -129,6 +129,20 @@ config SX9310 > To compile this driver as a module, choose M here: the > module will be called sx9310. > > +config SX9324 > + tristate "SX9324 Semtech proximity sensor" > + select IIO_BUFFER > + select IIO_TRIGGERED_BUFFER > + select REGMAP_I2C > + select SX_COMMON > + depends on I2C > + help > + Say Y here to build a driver for Semtech's SX9324 > + proximity/button sensor. > + > + To compile this driver as a module, choose M here: the > + module will be called sx9324. > + > config SX9500 > tristate "SX9500 Semtech proximity sensor" > select IIO_BUFFER > diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile > index 81a4716904ee2..1b026fedc396c 100644 > --- a/drivers/iio/proximity/Makefile > +++ b/drivers/iio/proximity/Makefile > @@ -14,6 +14,7 @@ obj-$(CONFIG_RFD77402) += rfd77402.o > obj-$(CONFIG_SRF04) += srf04.o > obj-$(CONFIG_SRF08) += srf08.o > obj-$(CONFIG_SX9310) += sx9310.o > +obj-$(CONFIG_SX9324) += sx9324.o > obj-$(CONFIG_SX_COMMON) += sx_common.o > obj-$(CONFIG_SX9500) += sx9500.o > obj-$(CONFIG_VCNL3020) += vcnl3020.o > diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c > new file mode 100644 > index 0000000000000..943a243a4d71c > --- /dev/null > +++ b/drivers/iio/proximity/sx9324.c > @@ -0,0 +1,931 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright 2021 Google LLC. > + * > + * Driver for Semtech's SX9324 capacitive proximity/button solution. > + * Based on SX9324 driver and copy of datasheet at: > + * https://edit.wpgdadawant.com/uploads/news_file/program/2019/30184/tech_files/program_30184_suggest_other_file.pdf > + * > + */ > + > +#include <linux/acpi.h> > +#include <linux/bitfield.h> > +#include <linux/delay.h> > +#include <linux/i2c.h> > +#include <linux/irq.h> > +#include <linux/gpio/consumer.h> > +#include <linux/kernel.h> > +#include <linux/log2.h> > +#include <linux/module.h> > +#include <linux/pm.h> > +#include <linux/regmap.h> > +#include <linux/slab.h> > + > +#include <linux/iio/buffer.h> > +#include <linux/iio/events.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/sysfs.h> > +#include <linux/iio/trigger.h> > +#include <linux/iio/triggered_buffer.h> > +#include <linux/iio/trigger_consumer.h> > + > +#include "sx_common.h" > + > +#define SX9324_DRIVER_NAME "sx9324" > + > +/* Register definitions. */ > +#define SX9324_REG_IRQ_SRC SX_COMMON_REG_IRQ_SRC > +#define SX9324_REG_STAT0 0x01 > +#define SX9324_REG_STAT1 0x02 > +#define SX9324_REG_STAT2 0x03 > +#define SX9324_REG_STAT2_COMPSTAT_MASK GENMASK(3, 0) > +#define SX9324_REG_STAT3 0x04 > +#define SX9324_REG_IRQ_MSK 0x05 > +#define SX9324_CONVDONE_IRQ BIT(3) > +#define SX9324_FAR_IRQ BIT(5) > +#define SX9324_CLOSE_IRQ BIT(6) > +#define SX9324_REG_IRQ_CFG0 0x06 > +#define SX9324_REG_IRQ_CFG1 0x07 > +#define SX9324_REG_IRQ_CFG1_FAILCOND 0x80 > +#define SX9324_REG_IRQ_CFG2 0x08 > + > +#define SX9324_REG_GNRL_CTRL0 0x10 > +#define SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK GENMASK(4, 0) > +#define SX9324_REG_GNRL_CTRL0_SCANPERIOD_100MS 0x16 > +#define SX9324_REG_GNRL_CTRL1 0x11 > +#define SX9324_REG_GNRL_CTRL1_PHEN_MASK GENMASK(3, 0) > +#define SX9324_REG_GNRL_CTRL1_PAUSECTRL 0x20 > + > +#define SX9324_REG_I2C_ADDR 0x14 > +#define SX9324_REG_CLK_SPRD 0x15 > + > +#define SX9324_REG_AFE_CTRL0 0x20 > +#define SX9324_REG_AFE_CTRL1 0x21 > +#define SX9324_REG_AFE_CTRL2 0x22 > +#define SX9324_REG_AFE_CTRL3 0x23 > +#define SX9324_REG_AFE_CTRL4 0x24 > +#define SX9324_REG_AFE_CTRL4_FREQ_83_33HZ 0x40 > +#define SX9324_REG_AFE_CTRL4_RESOLUTION_MASK GENMASK(2, 0) > +#define SX9324_REG_AFE_CTRL4_RES_100 0x04 > +#define SX9324_REG_AFE_CTRL5 0x25 > +#define SX9324_REG_AFE_CTRL6 0x26 > +#define SX9324_REG_AFE_CTRL7 0x27 > +#define SX9324_REG_AFE_PH0 0x28 > +#define SX9324_REG_AFE_PH0_PIN_MASK(_pin) \ > + GENMASK(2 * (_pin) + 1, 2 * (_pin)) > + > +#define SX9324_REG_AFE_PH1 0x29 > +#define SX9324_REG_AFE_PH2 0x2a > +#define SX9324_REG_AFE_PH3 0x2b > +#define SX9324_REG_AFE_CTRL8 0x2c > +#define SX9324_REG_AFE_CTRL8_RESFILTN_4KOHM 0x02 > +#define SX9324_REG_AFE_CTRL9 0x2d > +#define SX9324_REG_AFE_CTRL9_AGAIN_1 0x08 > + > +#define SX9324_REG_PROX_CTRL0 0x30 > +#define SX9324_REG_PROX_CTRL0_GAIN_MASK GENMASK(5, 3) > +#define SX9324_REG_PROX_CTRL0_GAIN_1 0x80 > +#define SX9324_REG_PROX_CTRL0_RAWFILT_1P50 0x01 > +#define SX9324_REG_PROX_CTRL1 0x31 > +#define SX9324_REG_PROX_CTRL2 0x32 > +#define SX9324_REG_PROX_CTRL2_AVGNEG_THRESH_16K 0x20 > +#define SX9324_REG_PROX_CTRL3 0x33 > +#define SX9324_REG_PROX_CTRL3_AVGDEB_2SAMPLES 0x40 > +#define SX9324_REG_PROX_CTRL3_AVGPOS_THRESH_16K 0x20 > +#define SX9324_REG_PROX_CTRL4 0x34 > +#define SX9324_REG_PROX_CTRL4_AVGNEGFILT_MASK GENMASK(5, 3) > +#define SX9324_REG_PROX_CTRL4_AVGNEG_FILT_1P50 0x08 > +#define SX9324_REG_PROX_CTRL4_AVGPOSFILT_MASK GENMASK(2, 0) > +#define SX9324_REG_PROX_CTRL3_AVGPOS_FILT_1P256 0x04 > +#define SX9324_REG_PROX_CTRL5 0x35 > +#define SX9324_REG_PROX_CTRL5_HYST_MASK GENMASK(5, 4) > +#define SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK GENMASK(3, 2) > +#define SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK GENMASK(1, 0) > +#define SX9324_REG_PROX_CTRL6 0x36 > +#define SX9324_REG_PROX_CTRL6_PROXTHRESH_32 0x08 > +#define SX9324_REG_PROX_CTRL7 0x37 > + > +#define SX9324_REG_ADV_CTRL0 0x40 > +#define SX9324_REG_ADV_CTRL1 0x41 > +#define SX9324_REG_ADV_CTRL2 0x42 > +#define SX9324_REG_ADV_CTRL3 0x43 > +#define SX9324_REG_ADV_CTRL4 0x44 > +#define SX9324_REG_ADV_CTRL5 0x45 > +#define SX9324_REG_ADV_CTRL5_STARTUPSENS_MASK GENMASK(3, 2) > +#define SX9324_REG_ADV_CTRL5_STARTUP_SENSOR_1 0x04 > +#define SX9324_REG_ADV_CTRL5_STARTUP_METHOD_1 0x01 > +#define SX9324_REG_ADV_CTRL6 0x46 > +#define SX9324_REG_ADV_CTRL7 0x47 > +#define SX9324_REG_ADV_CTRL8 0x48 > +#define SX9324_REG_ADV_CTRL9 0x49 > +#define SX9324_REG_ADV_CTRL10 0x4a > +#define SX9324_REG_ADV_CTRL11 0x4b > +#define SX9324_REG_ADV_CTRL12 0x4c > +#define SX9324_REG_ADV_CTRL13 0x4d > +#define SX9324_REG_ADV_CTRL14 0x4e > +#define SX9324_REG_ADV_CTRL15 0x4f > +#define SX9324_REG_ADV_CTRL16 0x50 > +#define SX9324_REG_ADV_CTRL17 0x51 > +#define SX9324_REG_ADV_CTRL18 0x52 > +#define SX9324_REG_ADV_CTRL19 0x53 > +#define SX9324_REG_ADV_CTRL20 0x54 > +#define SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION 0xf0 > + > +#define SX9324_REG_PHASE_SEL 0x60 > + > +#define SX9324_REG_USEFUL_MSB 0x61 > +#define SX9324_REG_USEFUL_LSB 0x62 > + > +#define SX9324_REG_AVG_MSB 0x63 > +#define SX9324_REG_AVG_LSB 0x64 > + > +#define SX9324_REG_DIFF_MSB 0x65 > +#define SX9324_REG_DIFF_LSB 0x66 > + > +#define SX9324_REG_OFFSET_MSB 0x67 > +#define SX9324_REG_OFFSET_LSB 0x68 > + > +#define SX9324_REG_SAR_MSB 0x69 > +#define SX9324_REG_SAR_LSB 0x6a > + > +#define SX9324_REG_RESET 0x9f > +/* Write this to REG_RESET to do a soft reset. */ > +#define SX9324_SOFT_RESET 0xde > + > +#define SX9324_REG_WHOAMI 0xfa > +#define SX9324_REG_REVISION 0xfe > + > +/* 4 channels, as defined in STAT0: PH0, PH1, PH2 and PH3. */ > +#define SX9324_NUM_CHANNELS 4 > +/* 3 CS pins: CS0, CS1, CS2. */ > +#define SX9324_NUM_PINS 3 > + > +static const char * const sx9324_cs_pin_usage[] = { "HZ", "MI", "DS", "GD" }; > + > +static ssize_t sx9324_phase_configuration_show(struct iio_dev *indio_dev, > + uintptr_t private, > + const struct iio_chan_spec *chan, > + char *buf) > +{ > + struct sx_common_data *data = iio_priv(indio_dev); > + unsigned int val; > + int i, ret, pin_idx; > + size_t len = 0; > + > + ret = regmap_read(data->regmap, SX9324_REG_AFE_PH0 + chan->channel, &val); > + > + for (i = 0; i < SX9324_NUM_PINS; i++) { > + pin_idx = (val & SX9324_REG_AFE_PH0_PIN_MASK(i)) >> (2 * i); > + len += scnprintf(buf + len, PAGE_SIZE - len, "%s,", > + sx9324_cs_pin_usage[pin_idx]); > + } > + buf[len - 1] = '\n'; > + return len; > +} > + > +static const struct iio_chan_spec_ext_info sx9324_channel_ext_info[] = { > + { > + .name = "setting", > + .shared = IIO_SEPARATE, > + .read = sx9324_phase_configuration_show, > + }, > + {} > +}; > + > +#define SX9324_CHANNEL(idx) \ > +{ \ > + .type = IIO_PROXIMITY, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > + BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ > + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ > + .info_mask_separate_available = \ > + BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ > + .info_mask_shared_by_all_available = \ > + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ > + .indexed = 1, \ > + .channel = idx, \ > + .address = SX9324_REG_DIFF_MSB, \ > + .event_spec = sx_common_events, \ > + .num_event_specs = ARRAY_SIZE(sx_common_events), \ > + .scan_index = idx, \ > + .scan_type = { \ > + .sign = 's', \ > + .realbits = 12, \ > + .storagebits = 16, \ > + .endianness = IIO_BE, \ > + }, \ > + .ext_info = sx9324_channel_ext_info, \ > +} > + > +static const struct iio_chan_spec sx9324_channels[] = { > + SX9324_CHANNEL(0), /* Phase 0 */ > + SX9324_CHANNEL(1), /* Phase 1 */ > + SX9324_CHANNEL(2), /* Phase 2 */ > + SX9324_CHANNEL(3), /* Phase 3 */ > + IIO_CHAN_SOFT_TIMESTAMP(4), > +}; > + > +/* > + * Each entry contains the integer part (val) and the fractional part, in micro > + * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO. > + */ > +static const struct { > + int val; > + int val2; > +} sx9324_samp_freq_table[] = { > + {1000, 0}, /* 00000: Min (no idle time) */ > + {500, 0}, /* 00001: 2 ms */ > + {250, 0}, /* 00010: 4 ms */ > + {166, 666666}, /* 00011: 6 ms */ > + {125, 0}, /* 00100: 8 ms */ > + {100, 0}, /* 00101: 10 ms */ > + {71, 428571}, /* 00110: 14 ms */ > + {55, 555556}, /* 00111: 18 ms */ > + {45, 454545}, /* 01000: 22 ms */ > + {38, 461538}, /* 01001: 26 ms */ > + {33, 333333}, /* 01010: 30 ms */ > + {29, 411765}, /* 01011: 34 ms */ > + {26, 315789}, /* 01100: 38 ms */ > + {23, 809524}, /* 01101: 42 ms */ > + {21, 739130}, /* 01110: 46 ms */ > + {20, 0}, /* 01111: 50 ms */ > + {17, 857143}, /* 10000: 56 ms */ > + {16, 129032}, /* 10001: 62 ms */ > + {14, 705882}, /* 10010: 68 ms */ > + {13, 513514}, /* 10011: 74 ms */ > + {12, 500000}, /* 10100: 80 ms */ > + {11, 111111}, /* 10101: 90 ms */ > + {10, 0}, /* 10110: 100 ms (Typ.) */ > + {5, 0}, /* 10111: 200 ms */ > + {3, 333333}, /* 11000: 300 ms */ > + {2, 500000}, /* 11001: 400 ms */ > + {1, 666667}, /* 11010: 600 ms */ > + {1, 250000}, /* 11011: 800 ms */ > + {1, 0}, /* 11100: 1 s */ > + {0, 500000}, /* 11101: 2 s */ > + {0, 333333}, /* 11110: 3 s */ > + {0, 250000}, /* 11111: 4 s */ > +}; > + > +static const unsigned int sx9324_scan_period_table[] = { > + 2, 15, 30, 45, 60, 90, 120, 200, > + 400, 600, 800, 1000, 2000, 3000, 4000, 5000, > +}; > + > +static const struct regmap_range sx9324_writable_reg_ranges[] = { > + /* > + * To set COMPSTAT for compensation, even if datasheet says register is > + * RO. > + */ > + regmap_reg_range(SX9324_REG_STAT2, SX9324_REG_STAT2), > + regmap_reg_range(SX9324_REG_IRQ_MSK, SX9324_REG_IRQ_CFG2), > + regmap_reg_range(SX9324_REG_GNRL_CTRL0, SX9324_REG_GNRL_CTRL1), > + /* Leave i2c and clock spreading as unavailable */ > + regmap_reg_range(SX9324_REG_AFE_CTRL0, SX9324_REG_AFE_CTRL9), > + regmap_reg_range(SX9324_REG_PROX_CTRL0, SX9324_REG_PROX_CTRL7), > + regmap_reg_range(SX9324_REG_ADV_CTRL0, SX9324_REG_ADV_CTRL20), > + regmap_reg_range(SX9324_REG_PHASE_SEL, SX9324_REG_PHASE_SEL), > + regmap_reg_range(SX9324_REG_OFFSET_MSB, SX9324_REG_OFFSET_LSB), > + regmap_reg_range(SX9324_REG_RESET, SX9324_REG_RESET), > +}; > + > +static const struct regmap_access_table sx9324_writeable_regs = { > + .yes_ranges = sx9324_writable_reg_ranges, > + .n_yes_ranges = ARRAY_SIZE(sx9324_writable_reg_ranges), > +}; > + > +/* > + * All allocated registers are readable, so we just list unallocated > + * ones. > + */ > +static const struct regmap_range sx9324_non_readable_reg_ranges[] = { > + regmap_reg_range(SX9324_REG_IRQ_CFG2 + 1, SX9324_REG_GNRL_CTRL0 - 1), > + regmap_reg_range(SX9324_REG_GNRL_CTRL1 + 1, SX9324_REG_AFE_CTRL0 - 1), > + regmap_reg_range(SX9324_REG_AFE_CTRL9 + 1, SX9324_REG_PROX_CTRL0 - 1), > + regmap_reg_range(SX9324_REG_PROX_CTRL7 + 1, SX9324_REG_ADV_CTRL0 - 1), > + regmap_reg_range(SX9324_REG_ADV_CTRL20 + 1, SX9324_REG_PHASE_SEL - 1), > + regmap_reg_range(SX9324_REG_SAR_LSB + 1, SX9324_REG_RESET - 1), > + regmap_reg_range(SX9324_REG_RESET + 1, SX9324_REG_WHOAMI - 1), > + regmap_reg_range(SX9324_REG_WHOAMI + 1, SX9324_REG_REVISION - 1), > +}; > + > +static const struct regmap_access_table sx9324_readable_regs = { > + .no_ranges = sx9324_non_readable_reg_ranges, > + .n_no_ranges = ARRAY_SIZE(sx9324_non_readable_reg_ranges), > +}; > + > +static const struct regmap_range sx9324_volatile_reg_ranges[] = { > + regmap_reg_range(SX9324_REG_IRQ_SRC, SX9324_REG_STAT3), > + regmap_reg_range(SX9324_REG_USEFUL_MSB, SX9324_REG_DIFF_LSB), > + regmap_reg_range(SX9324_REG_SAR_MSB, SX9324_REG_SAR_LSB), > + regmap_reg_range(SX9324_REG_WHOAMI, SX9324_REG_WHOAMI), > + regmap_reg_range(SX9324_REG_REVISION, SX9324_REG_REVISION), > +}; > + > +static const struct regmap_access_table sx9324_volatile_regs = { > + .yes_ranges = sx9324_volatile_reg_ranges, > + .n_yes_ranges = ARRAY_SIZE(sx9324_volatile_reg_ranges), > +}; > + > +static const struct regmap_config sx9324_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + > + .max_register = SX9324_REG_REVISION, > + .cache_type = REGCACHE_RBTREE, > + > + .wr_table = &sx9324_writeable_regs, > + .rd_table = &sx9324_readable_regs, > + .volatile_table = &sx9324_volatile_regs, > +}; > + > +static int sx9324_read_prox_data(struct sx_common_data *data, > + const struct iio_chan_spec *chan, > + __be16 *val) > +{ > + int ret; > + > + ret = regmap_write(data->regmap, SX9324_REG_PHASE_SEL, chan->channel); > + if (ret < 0) > + return ret; > + > + return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val)); > +} > + > +/* > + * If we have no interrupt support, we have to wait for a scan period > + * after enabling a channel to get a result. > + */ > +static int sx9324_wait_for_sample(struct sx_common_data *data) > +{ > + int ret; > + unsigned int val; > + > + ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL0, &val); > + if (ret < 0) > + return ret; > + val = FIELD_GET(SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, val); > + > + msleep(sx9324_scan_period_table[val]); > + > + return 0; > +} > + > +static int sx9324_read_gain(struct sx_common_data *data, > + const struct iio_chan_spec *chan, int *val) > +{ > + unsigned int reg, regval; > + int ret; > + > + reg = SX9324_REG_PROX_CTRL0 + chan->channel / 2; > + ret = regmap_read(data->regmap, reg, ®val); > + if (ret) > + return ret; > + > + *val = 1 << FIELD_GET(SX9324_REG_PROX_CTRL0_GAIN_MASK, regval); > + > + return IIO_VAL_INT; > +} > + > +static int sx9324_read_samp_freq(struct sx_common_data *data, > + int *val, int *val2) > +{ > + int ret; > + unsigned int regval; > + > + ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL0, ®val); > + if (ret) > + return ret; > + > + regval = FIELD_GET(SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, regval); > + *val = sx9324_samp_freq_table[regval].val; > + *val2 = sx9324_samp_freq_table[regval].val2; > + > + return IIO_VAL_INT_PLUS_MICRO; > +} > + > +static int sx9324_read_raw(struct iio_dev *indio_dev, > + const struct iio_chan_spec *chan, > + int *val, int *val2, long mask) > +{ > + struct sx_common_data *data = iio_priv(indio_dev); > + int ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + ret = iio_device_claim_direct_mode(indio_dev); > + if (ret) > + return ret; > + > + ret = sx_common_read_proximity(data, chan, val); > + iio_device_release_direct_mode(indio_dev); > + return ret; > + case IIO_CHAN_INFO_HARDWAREGAIN: > + ret = iio_device_claim_direct_mode(indio_dev); > + if (ret) > + return ret; > + > + ret = sx9324_read_gain(data, chan, val); > + iio_device_release_direct_mode(indio_dev); > + return ret; > + case IIO_CHAN_INFO_SAMP_FREQ: > + return sx9324_read_samp_freq(data, val, val2); > + default: > + return -EINVAL; > + } > +} > + > +static const int sx9324_gain_vals[] = { 1, 2, 4, 8 }; > + > +static int sx9324_read_avail(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + const int **vals, int *type, int *length, > + long mask) > +{ > + if (chan->type != IIO_PROXIMITY) > + return -EINVAL; > + > + switch (mask) { > + case IIO_CHAN_INFO_HARDWAREGAIN: > + *type = IIO_VAL_INT; > + *length = ARRAY_SIZE(sx9324_gain_vals); > + *vals = sx9324_gain_vals; > + return IIO_AVAIL_LIST; > + case IIO_CHAN_INFO_SAMP_FREQ: > + *type = IIO_VAL_INT_PLUS_MICRO; > + *length = ARRAY_SIZE(sx9324_samp_freq_table) * 2; > + *vals = (int *)sx9324_samp_freq_table; > + return IIO_AVAIL_LIST; > + } > + > + return -EINVAL; > +} > + > +static int sx9324_set_samp_freq(struct sx_common_data *data, > + int val, int val2) > +{ > + int i, ret; > + > + for (i = 0; i < ARRAY_SIZE(sx9324_samp_freq_table); i++) > + if (val == sx9324_samp_freq_table[i].val && > + val2 == sx9324_samp_freq_table[i].val2) > + break; > + > + if (i == ARRAY_SIZE(sx9324_samp_freq_table)) > + return -EINVAL; > + > + mutex_lock(&data->mutex); > + > + ret = regmap_update_bits(data->regmap, > + SX9324_REG_GNRL_CTRL0, > + SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, i); > + > + mutex_unlock(&data->mutex); > + > + return ret; > +} > + > +static int sx9324_read_thresh(struct sx_common_data *data, > + const struct iio_chan_spec *chan, int *val) > +{ > + unsigned int regval; > + unsigned int reg; > + int ret; > + > + /* > + * TODO(gwendal): Depending on the phase function > + * (proximity/table/body), retrieve the right threshold. > + */ > + reg = SX9324_REG_PROX_CTRL6 + chan->channel / 2; > + ret = regmap_read(data->regmap, reg, ®val); > + if (ret) > + return ret; > + > + if (regval <= 1) > + *val = regval; > + else > + *val = (regval * regval) / 2; > + > + return IIO_VAL_INT; > +} > + > +static int sx9324_read_hysteresis(struct sx_common_data *data, > + const struct iio_chan_spec *chan, int *val) > +{ > + unsigned int regval, pthresh; > + int ret; > + > + ret = sx9324_read_thresh(data, chan, &pthresh); > + if (ret < 0) > + return ret; > + > + ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, ®val); > + if (ret) > + return ret; > + > + regval = FIELD_GET(SX9324_REG_PROX_CTRL5_HYST_MASK, regval); > + if (!regval) > + *val = 0; > + else > + *val = pthresh >> (5 - regval); > + > + return IIO_VAL_INT; > +} > + > +static int sx9324_read_far_debounce(struct sx_common_data *data, int *val) > +{ > + unsigned int regval; > + int ret; > + > + ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, ®val); > + if (ret) > + return ret; > + > + regval = FIELD_GET(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, regval); > + if (regval) > + *val = 1 << regval; > + else > + *val = 0; > + > + return IIO_VAL_INT; > +} > + > +static int sx9324_read_close_debounce(struct sx_common_data *data, int *val) > +{ > + unsigned int regval; > + int ret; > + > + ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, ®val); > + if (ret) > + return ret; > + > + regval = FIELD_GET(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, regval); > + if (regval) > + *val = 1 << regval; > + else > + *val = 0; > + > + return IIO_VAL_INT; > +} > + > +static int sx9324_read_event_val(struct iio_dev *indio_dev, > + const struct iio_chan_spec *chan, > + enum iio_event_type type, > + enum iio_event_direction dir, > + enum iio_event_info info, int *val, int *val2) > +{ > + struct sx_common_data *data = iio_priv(indio_dev); > + > + if (chan->type != IIO_PROXIMITY) > + return -EINVAL; > + > + switch (info) { > + case IIO_EV_INFO_VALUE: > + return sx9324_read_thresh(data, chan, val); > + case IIO_EV_INFO_PERIOD: > + switch (dir) { > + case IIO_EV_DIR_RISING: > + return sx9324_read_far_debounce(data, val); > + case IIO_EV_DIR_FALLING: > + return sx9324_read_close_debounce(data, val); > + default: > + return -EINVAL; > + } > + case IIO_EV_INFO_HYSTERESIS: > + return sx9324_read_hysteresis(data, chan, val); > + default: > + return -EINVAL; > + } > +} > + > +static int sx9324_write_thresh(struct sx_common_data *data, > + const struct iio_chan_spec *chan, int val) > +{ > + unsigned int reg; > + int ret; > + > + reg = SX9324_REG_PROX_CTRL6 + chan->channel / 2; > + > + if (val >= 1) > + val = int_sqrt(2 * val); > + > + if (val > 0xff) > + return -EINVAL; > + > + mutex_lock(&data->mutex); > + ret = regmap_write(data->regmap, reg, val); > + mutex_unlock(&data->mutex); > + > + return ret; > +} > + > +static int sx9324_write_hysteresis(struct sx_common_data *data, > + const struct iio_chan_spec *chan, int _val) > +{ > + unsigned int hyst, val = _val; > + int ret, pthresh; > + > + ret = sx9324_read_thresh(data, chan, &pthresh); > + if (ret < 0) > + return ret; > + > + if (val == 0) > + hyst = 0; > + else if (val >= pthresh >> 2) > + hyst = 3; > + else if (val >= pthresh >> 3) > + hyst = 2; > + else if (val >= pthresh >> 4) > + hyst = 1; > + else > + return -EINVAL; > + > + hyst = FIELD_PREP(SX9324_REG_PROX_CTRL5_HYST_MASK, hyst); > + mutex_lock(&data->mutex); > + ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, > + SX9324_REG_PROX_CTRL5_HYST_MASK, hyst); > + mutex_unlock(&data->mutex); > + > + return ret; > +} > + > +static int sx9324_write_far_debounce(struct sx_common_data *data, int val) > +{ > + unsigned int regval; > + int ret; > + > + if (val > 0) > + val = ilog2(val); > + if (!FIELD_FIT(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, val)) > + return -EINVAL; > + > + regval = FIELD_PREP(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, val); > + > + mutex_lock(&data->mutex); > + ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, > + SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, > + regval); > + mutex_unlock(&data->mutex); > + > + return ret; > +} > + > +static int sx9324_write_close_debounce(struct sx_common_data *data, int val) > +{ > + unsigned int regval; > + int ret; > + > + if (val > 0) > + val = ilog2(val); > + if (!FIELD_FIT(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, val)) > + return -EINVAL; > + > + regval = FIELD_PREP(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, val); > + > + mutex_lock(&data->mutex); > + ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, > + SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, > + regval); > + mutex_unlock(&data->mutex); > + > + return ret; > +} > + > +static int sx9324_write_event_val(struct iio_dev *indio_dev, > + const struct iio_chan_spec *chan, > + enum iio_event_type type, > + enum iio_event_direction dir, > + enum iio_event_info info, int val, int val2) > +{ > + struct sx_common_data *data = iio_priv(indio_dev); > + > + if (chan->type != IIO_PROXIMITY) > + return -EINVAL; > + > + switch (info) { > + case IIO_EV_INFO_VALUE: > + return sx9324_write_thresh(data, chan, val); > + case IIO_EV_INFO_PERIOD: > + switch (dir) { > + case IIO_EV_DIR_RISING: > + return sx9324_write_far_debounce(data, val); > + case IIO_EV_DIR_FALLING: > + return sx9324_write_close_debounce(data, val); > + default: > + return -EINVAL; > + } > + case IIO_EV_INFO_HYSTERESIS: > + return sx9324_write_hysteresis(data, chan, val); > + default: > + return -EINVAL; > + } > +} > + > +static int sx9324_write_gain(struct sx_common_data *data, > + const struct iio_chan_spec *chan, int val) > +{ > + unsigned int gain, reg; > + int ret; > + > + gain = ilog2(val); > + reg = SX9324_REG_PROX_CTRL0 + chan->channel / 2; > + gain = FIELD_PREP(SX9324_REG_PROX_CTRL0_GAIN_MASK, gain); > + > + mutex_lock(&data->mutex); > + ret = regmap_update_bits(data->regmap, reg, > + SX9324_REG_PROX_CTRL0_GAIN_MASK, > + gain); > + mutex_unlock(&data->mutex); > + > + return ret; > +} > + > +static int sx9324_write_raw(struct iio_dev *indio_dev, > + const struct iio_chan_spec *chan, int val, int val2, > + long mask) > +{ > + struct sx_common_data *data = iio_priv(indio_dev); > + > + switch (mask) { > + case IIO_CHAN_INFO_SAMP_FREQ: > + return sx9324_set_samp_freq(data, val, val2); > + case IIO_CHAN_INFO_HARDWAREGAIN: > + return sx9324_write_gain(data, chan, val); > + } > + > + return -EINVAL; > +} > + > +/* Activate all channels and perform an initial compensation. */ > +static int sx9324_init_compensation(struct iio_dev *indio_dev) > +{ > + struct sx_common_data *data = iio_priv(indio_dev); > + unsigned int val; > + int ret; > + > + /* run the compensation phase on all channels */ > + ret = regmap_update_bits(data->regmap, SX9324_REG_STAT2, > + SX9324_REG_STAT2_COMPSTAT_MASK, > + SX9324_REG_STAT2_COMPSTAT_MASK); > + if (ret) > + return ret; > + > + ret = regmap_read_poll_timeout(data->regmap, SX9324_REG_STAT2, val, > + !(val & SX9324_REG_STAT2_COMPSTAT_MASK), > + 20000, 2000000); > + if (ret == -ETIMEDOUT) > + dev_err(&data->client->dev, > + "initial compensation timed out: 0x%02x\n", > + val); > + return ret; > +} > + > +static int sx9324_check_whoami(struct device *dev, > + struct iio_dev *indio_dev) > +{ > + struct sx_common_data *data = iio_priv(indio_dev); > + unsigned int long ddata; > + unsigned int whoami; > + int ret; > + > + ret = regmap_read(data->regmap, SX9324_REG_WHOAMI, &whoami); > + if (ret) { > + dev_err(dev, "error in reading WHOAMI register: %d", ret); > + return ret; > + } > + > + ddata = (uintptr_t)device_get_match_data(dev); > + if (ddata != whoami) { > + dev_err(dev, "WHOAMI does not match device data: %u\n", whoami); > + return -ENODEV; > + } > + > + switch (whoami) { > + case SX9324_WHOAMI_VALUE: > + indio_dev->name = "sx9324"; > + break; > + default: > + dev_err(dev, "unexpected WHOAMI response: %u\n", whoami); > + return -ENODEV; > + } > + > + return 0; > +} > + > +static const struct sx_common_chip_info sx9324_chip_info = { > + .reg_stat = SX9324_REG_STAT0, > + .reg_irq_msk = SX9324_REG_IRQ_MSK, > + .reg_enable_chan = SX9324_REG_GNRL_CTRL1, > + .reg_reset = SX9324_REG_RESET, > + > + .mask_enable_chan = SX9324_REG_GNRL_CTRL1_PHEN_MASK, > + .irq_msk_offset = 3, > + .num_channels = SX9324_NUM_CHANNELS, > + > + .ops = { > + .read_prox_data = sx9324_read_prox_data, > + .check_whoami = sx9324_check_whoami, > + .init_compensation = sx9324_init_compensation, > + .wait_for_sample = sx9324_wait_for_sample, > + }, > + > + .iio_channels = sx9324_channels, > + .num_iio_channels = ARRAY_SIZE(sx9324_channels), > + .iio_info = { > + .read_raw = sx9324_read_raw, > + .read_avail = sx9324_read_avail, > + .read_event_value = sx9324_read_event_val, > + .write_event_value = sx9324_write_event_val, > + .write_raw = sx9324_write_raw, > + .read_event_config = sx_common_read_event_config, > + .write_event_config = sx_common_write_event_config, > + }, > +}; > + > +static int sx9324_probe(struct i2c_client *client) > +{ > + return sx_common_probe(client, &sx9324_chip_info, &sx9324_regmap_config); > +} > + > +static int __maybe_unused sx9324_suspend(struct device *dev) > +{ > + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); > + struct sx_common_data *data = iio_priv(indio_dev); > + unsigned int regval; > + int ret; > + > + mutex_lock(&data->mutex); > + ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL1, ®val); > + > + data->suspend_ctrl = > + FIELD_GET(SX9324_REG_GNRL_CTRL1_PHEN_MASK, regval); > + > + if (ret < 0) > + goto out; > + > + // disable all phases, send the device to sleep > + ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, 0); > + > +out: > + mutex_unlock(&data->mutex); > + return ret; > +} > + > +static int __maybe_unused sx9324_resume(struct device *dev) > +{ > + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); > + struct sx_common_data *data = iio_priv(indio_dev); > + int ret; > + > + mutex_lock(&data->mutex); > + ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, > + data->suspend_ctrl | SX9324_REG_GNRL_CTRL1_PAUSECTRL); > + mutex_unlock(&data->mutex); > + > + return ret; > +} > + > +static const struct dev_pm_ops sx9324_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(sx9324_suspend, sx9324_resume) > +}; > + > +static const struct acpi_device_id sx9324_acpi_match[] = { > + { "STH9324", SX9324_WHOAMI_VALUE}, > + { }, > +}; > +MODULE_DEVICE_TABLE(acpi, sx9324_acpi_match); > + > +static const struct of_device_id sx9324_of_match[] = { > + { .compatible = "semtech,sx9324", (void *)SX9324_WHOAMI_VALUE}, > + { } > +}; > +MODULE_DEVICE_TABLE(of, sx9324_of_match); > + > +static const struct i2c_device_id sx9324_id[] = { > + {"sx9324", SX9324_WHOAMI_VALUE}, > + { }, > +}; > +MODULE_DEVICE_TABLE(i2c, sx9324_id); > + > +static struct i2c_driver sx9324_driver = { > + .driver = { > + .name = SX9324_DRIVER_NAME, > + .acpi_match_table = ACPI_PTR(sx9324_acpi_match), > + .of_match_table = of_match_ptr(sx9324_of_match), > + .pm = &sx9324_pm_ops, > + > + /* > + * Lots of i2c transfers in probe + over 200 ms waiting in > + * sx9324_init_compensation() mean a slow probe; prefer async > + * so we don't delay boot if we're builtin to the kernel. > + */ > + .probe_type = PROBE_PREFER_ASYNCHRONOUS, > + }, > + .probe_new = sx9324_probe, > + .id_table = sx9324_id, > +}; > +module_i2c_driver(sx9324_driver); > + > +MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>"); > +MODULE_DESCRIPTION("Driver for Semtech SX9324 proximity sensor"); > +MODULE_LICENSE("GPL v2"); > -- > 2.33.1.1089.g2158813163f-goog >
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sx9324 b/Documentation/ABI/testing/sysfs-bus-iio-sx9324 new file mode 100644 index 0000000000000..df018e9ee685f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-sx9324 @@ -0,0 +1,29 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_proximity<id>_setup +Date: November 2021 +KernelVersion: 5.14 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + SX9324 has 3 inputs, CS0, CS1 and CS2. Hardware layout + defines if the input is + + not connected (HZ), + + grounded (GD), + + connected to an antenna where it can act as a base + (DS - data shield), or measured input (MI). + + The sensor rotates measurement across 4 phases + (PH0, PH1, PH2, PH3), where the inputs are configured + and then measured. + + By default, during the first phase, [PH0], CS0 is measured, + while CS1 and CS2 are used as shields. + `cat in_proximity0_setup` returns "MI,DS,DS". + [PH1], CS1 is measured, CS0 and CS2 are shield: + `cat in_proximity1_setup` returns "DS,MI,DS". + [PH2], CS2 is measured, CS0 and CS1 are shield: + `cat in_proximity1_setup` returns "DS,DS,MI". + [PH3], CS1 and CS2 are measured (combo mode): + `cat in_proximity1_setup` returns "DS,MI,MI". + + Note, these are the chip default. Hardware layout will most + likely dictate different output. The entry is read-only. + diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig index e88fc373c2c90..aaddf97f9b219 100644 --- a/drivers/iio/proximity/Kconfig +++ b/drivers/iio/proximity/Kconfig @@ -129,6 +129,20 @@ config SX9310 To compile this driver as a module, choose M here: the module will be called sx9310. +config SX9324 + tristate "SX9324 Semtech proximity sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP_I2C + select SX_COMMON + depends on I2C + help + Say Y here to build a driver for Semtech's SX9324 + proximity/button sensor. + + To compile this driver as a module, choose M here: the + module will be called sx9324. + config SX9500 tristate "SX9500 Semtech proximity sensor" select IIO_BUFFER diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile index 81a4716904ee2..1b026fedc396c 100644 --- a/drivers/iio/proximity/Makefile +++ b/drivers/iio/proximity/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_RFD77402) += rfd77402.o obj-$(CONFIG_SRF04) += srf04.o obj-$(CONFIG_SRF08) += srf08.o obj-$(CONFIG_SX9310) += sx9310.o +obj-$(CONFIG_SX9324) += sx9324.o obj-$(CONFIG_SX_COMMON) += sx_common.o obj-$(CONFIG_SX9500) += sx9500.o obj-$(CONFIG_VCNL3020) += vcnl3020.o diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c new file mode 100644 index 0000000000000..943a243a4d71c --- /dev/null +++ b/drivers/iio/proximity/sx9324.c @@ -0,0 +1,931 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021 Google LLC. + * + * Driver for Semtech's SX9324 capacitive proximity/button solution. + * Based on SX9324 driver and copy of datasheet at: + * https://edit.wpgdadawant.com/uploads/news_file/program/2019/30184/tech_files/program_30184_suggest_other_file.pdf + * + */ + +#include <linux/acpi.h> +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/gpio/consumer.h> +#include <linux/kernel.h> +#include <linux/log2.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/events.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> + +#include "sx_common.h" + +#define SX9324_DRIVER_NAME "sx9324" + +/* Register definitions. */ +#define SX9324_REG_IRQ_SRC SX_COMMON_REG_IRQ_SRC +#define SX9324_REG_STAT0 0x01 +#define SX9324_REG_STAT1 0x02 +#define SX9324_REG_STAT2 0x03 +#define SX9324_REG_STAT2_COMPSTAT_MASK GENMASK(3, 0) +#define SX9324_REG_STAT3 0x04 +#define SX9324_REG_IRQ_MSK 0x05 +#define SX9324_CONVDONE_IRQ BIT(3) +#define SX9324_FAR_IRQ BIT(5) +#define SX9324_CLOSE_IRQ BIT(6) +#define SX9324_REG_IRQ_CFG0 0x06 +#define SX9324_REG_IRQ_CFG1 0x07 +#define SX9324_REG_IRQ_CFG1_FAILCOND 0x80 +#define SX9324_REG_IRQ_CFG2 0x08 + +#define SX9324_REG_GNRL_CTRL0 0x10 +#define SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK GENMASK(4, 0) +#define SX9324_REG_GNRL_CTRL0_SCANPERIOD_100MS 0x16 +#define SX9324_REG_GNRL_CTRL1 0x11 +#define SX9324_REG_GNRL_CTRL1_PHEN_MASK GENMASK(3, 0) +#define SX9324_REG_GNRL_CTRL1_PAUSECTRL 0x20 + +#define SX9324_REG_I2C_ADDR 0x14 +#define SX9324_REG_CLK_SPRD 0x15 + +#define SX9324_REG_AFE_CTRL0 0x20 +#define SX9324_REG_AFE_CTRL1 0x21 +#define SX9324_REG_AFE_CTRL2 0x22 +#define SX9324_REG_AFE_CTRL3 0x23 +#define SX9324_REG_AFE_CTRL4 0x24 +#define SX9324_REG_AFE_CTRL4_FREQ_83_33HZ 0x40 +#define SX9324_REG_AFE_CTRL4_RESOLUTION_MASK GENMASK(2, 0) +#define SX9324_REG_AFE_CTRL4_RES_100 0x04 +#define SX9324_REG_AFE_CTRL5 0x25 +#define SX9324_REG_AFE_CTRL6 0x26 +#define SX9324_REG_AFE_CTRL7 0x27 +#define SX9324_REG_AFE_PH0 0x28 +#define SX9324_REG_AFE_PH0_PIN_MASK(_pin) \ + GENMASK(2 * (_pin) + 1, 2 * (_pin)) + +#define SX9324_REG_AFE_PH1 0x29 +#define SX9324_REG_AFE_PH2 0x2a +#define SX9324_REG_AFE_PH3 0x2b +#define SX9324_REG_AFE_CTRL8 0x2c +#define SX9324_REG_AFE_CTRL8_RESFILTN_4KOHM 0x02 +#define SX9324_REG_AFE_CTRL9 0x2d +#define SX9324_REG_AFE_CTRL9_AGAIN_1 0x08 + +#define SX9324_REG_PROX_CTRL0 0x30 +#define SX9324_REG_PROX_CTRL0_GAIN_MASK GENMASK(5, 3) +#define SX9324_REG_PROX_CTRL0_GAIN_1 0x80 +#define SX9324_REG_PROX_CTRL0_RAWFILT_1P50 0x01 +#define SX9324_REG_PROX_CTRL1 0x31 +#define SX9324_REG_PROX_CTRL2 0x32 +#define SX9324_REG_PROX_CTRL2_AVGNEG_THRESH_16K 0x20 +#define SX9324_REG_PROX_CTRL3 0x33 +#define SX9324_REG_PROX_CTRL3_AVGDEB_2SAMPLES 0x40 +#define SX9324_REG_PROX_CTRL3_AVGPOS_THRESH_16K 0x20 +#define SX9324_REG_PROX_CTRL4 0x34 +#define SX9324_REG_PROX_CTRL4_AVGNEGFILT_MASK GENMASK(5, 3) +#define SX9324_REG_PROX_CTRL4_AVGNEG_FILT_1P50 0x08 +#define SX9324_REG_PROX_CTRL4_AVGPOSFILT_MASK GENMASK(2, 0) +#define SX9324_REG_PROX_CTRL3_AVGPOS_FILT_1P256 0x04 +#define SX9324_REG_PROX_CTRL5 0x35 +#define SX9324_REG_PROX_CTRL5_HYST_MASK GENMASK(5, 4) +#define SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK GENMASK(3, 2) +#define SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK GENMASK(1, 0) +#define SX9324_REG_PROX_CTRL6 0x36 +#define SX9324_REG_PROX_CTRL6_PROXTHRESH_32 0x08 +#define SX9324_REG_PROX_CTRL7 0x37 + +#define SX9324_REG_ADV_CTRL0 0x40 +#define SX9324_REG_ADV_CTRL1 0x41 +#define SX9324_REG_ADV_CTRL2 0x42 +#define SX9324_REG_ADV_CTRL3 0x43 +#define SX9324_REG_ADV_CTRL4 0x44 +#define SX9324_REG_ADV_CTRL5 0x45 +#define SX9324_REG_ADV_CTRL5_STARTUPSENS_MASK GENMASK(3, 2) +#define SX9324_REG_ADV_CTRL5_STARTUP_SENSOR_1 0x04 +#define SX9324_REG_ADV_CTRL5_STARTUP_METHOD_1 0x01 +#define SX9324_REG_ADV_CTRL6 0x46 +#define SX9324_REG_ADV_CTRL7 0x47 +#define SX9324_REG_ADV_CTRL8 0x48 +#define SX9324_REG_ADV_CTRL9 0x49 +#define SX9324_REG_ADV_CTRL10 0x4a +#define SX9324_REG_ADV_CTRL11 0x4b +#define SX9324_REG_ADV_CTRL12 0x4c +#define SX9324_REG_ADV_CTRL13 0x4d +#define SX9324_REG_ADV_CTRL14 0x4e +#define SX9324_REG_ADV_CTRL15 0x4f +#define SX9324_REG_ADV_CTRL16 0x50 +#define SX9324_REG_ADV_CTRL17 0x51 +#define SX9324_REG_ADV_CTRL18 0x52 +#define SX9324_REG_ADV_CTRL19 0x53 +#define SX9324_REG_ADV_CTRL20 0x54 +#define SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION 0xf0 + +#define SX9324_REG_PHASE_SEL 0x60 + +#define SX9324_REG_USEFUL_MSB 0x61 +#define SX9324_REG_USEFUL_LSB 0x62 + +#define SX9324_REG_AVG_MSB 0x63 +#define SX9324_REG_AVG_LSB 0x64 + +#define SX9324_REG_DIFF_MSB 0x65 +#define SX9324_REG_DIFF_LSB 0x66 + +#define SX9324_REG_OFFSET_MSB 0x67 +#define SX9324_REG_OFFSET_LSB 0x68 + +#define SX9324_REG_SAR_MSB 0x69 +#define SX9324_REG_SAR_LSB 0x6a + +#define SX9324_REG_RESET 0x9f +/* Write this to REG_RESET to do a soft reset. */ +#define SX9324_SOFT_RESET 0xde + +#define SX9324_REG_WHOAMI 0xfa +#define SX9324_REG_REVISION 0xfe + +/* 4 channels, as defined in STAT0: PH0, PH1, PH2 and PH3. */ +#define SX9324_NUM_CHANNELS 4 +/* 3 CS pins: CS0, CS1, CS2. */ +#define SX9324_NUM_PINS 3 + +static const char * const sx9324_cs_pin_usage[] = { "HZ", "MI", "DS", "GD" }; + +static ssize_t sx9324_phase_configuration_show(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + struct sx_common_data *data = iio_priv(indio_dev); + unsigned int val; + int i, ret, pin_idx; + size_t len = 0; + + ret = regmap_read(data->regmap, SX9324_REG_AFE_PH0 + chan->channel, &val); + + for (i = 0; i < SX9324_NUM_PINS; i++) { + pin_idx = (val & SX9324_REG_AFE_PH0_PIN_MASK(i)) >> (2 * i); + len += scnprintf(buf + len, PAGE_SIZE - len, "%s,", + sx9324_cs_pin_usage[pin_idx]); + } + buf[len - 1] = '\n'; + return len; +} + +static const struct iio_chan_spec_ext_info sx9324_channel_ext_info[] = { + { + .name = "setting", + .shared = IIO_SEPARATE, + .read = sx9324_phase_configuration_show, + }, + {} +}; + +#define SX9324_CHANNEL(idx) \ +{ \ + .type = IIO_PROXIMITY, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_separate_available = \ + BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .indexed = 1, \ + .channel = idx, \ + .address = SX9324_REG_DIFF_MSB, \ + .event_spec = sx_common_events, \ + .num_event_specs = ARRAY_SIZE(sx_common_events), \ + .scan_index = idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ + .ext_info = sx9324_channel_ext_info, \ +} + +static const struct iio_chan_spec sx9324_channels[] = { + SX9324_CHANNEL(0), /* Phase 0 */ + SX9324_CHANNEL(1), /* Phase 1 */ + SX9324_CHANNEL(2), /* Phase 2 */ + SX9324_CHANNEL(3), /* Phase 3 */ + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +/* + * Each entry contains the integer part (val) and the fractional part, in micro + * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO. + */ +static const struct { + int val; + int val2; +} sx9324_samp_freq_table[] = { + {1000, 0}, /* 00000: Min (no idle time) */ + {500, 0}, /* 00001: 2 ms */ + {250, 0}, /* 00010: 4 ms */ + {166, 666666}, /* 00011: 6 ms */ + {125, 0}, /* 00100: 8 ms */ + {100, 0}, /* 00101: 10 ms */ + {71, 428571}, /* 00110: 14 ms */ + {55, 555556}, /* 00111: 18 ms */ + {45, 454545}, /* 01000: 22 ms */ + {38, 461538}, /* 01001: 26 ms */ + {33, 333333}, /* 01010: 30 ms */ + {29, 411765}, /* 01011: 34 ms */ + {26, 315789}, /* 01100: 38 ms */ + {23, 809524}, /* 01101: 42 ms */ + {21, 739130}, /* 01110: 46 ms */ + {20, 0}, /* 01111: 50 ms */ + {17, 857143}, /* 10000: 56 ms */ + {16, 129032}, /* 10001: 62 ms */ + {14, 705882}, /* 10010: 68 ms */ + {13, 513514}, /* 10011: 74 ms */ + {12, 500000}, /* 10100: 80 ms */ + {11, 111111}, /* 10101: 90 ms */ + {10, 0}, /* 10110: 100 ms (Typ.) */ + {5, 0}, /* 10111: 200 ms */ + {3, 333333}, /* 11000: 300 ms */ + {2, 500000}, /* 11001: 400 ms */ + {1, 666667}, /* 11010: 600 ms */ + {1, 250000}, /* 11011: 800 ms */ + {1, 0}, /* 11100: 1 s */ + {0, 500000}, /* 11101: 2 s */ + {0, 333333}, /* 11110: 3 s */ + {0, 250000}, /* 11111: 4 s */ +}; + +static const unsigned int sx9324_scan_period_table[] = { + 2, 15, 30, 45, 60, 90, 120, 200, + 400, 600, 800, 1000, 2000, 3000, 4000, 5000, +}; + +static const struct regmap_range sx9324_writable_reg_ranges[] = { + /* + * To set COMPSTAT for compensation, even if datasheet says register is + * RO. + */ + regmap_reg_range(SX9324_REG_STAT2, SX9324_REG_STAT2), + regmap_reg_range(SX9324_REG_IRQ_MSK, SX9324_REG_IRQ_CFG2), + regmap_reg_range(SX9324_REG_GNRL_CTRL0, SX9324_REG_GNRL_CTRL1), + /* Leave i2c and clock spreading as unavailable */ + regmap_reg_range(SX9324_REG_AFE_CTRL0, SX9324_REG_AFE_CTRL9), + regmap_reg_range(SX9324_REG_PROX_CTRL0, SX9324_REG_PROX_CTRL7), + regmap_reg_range(SX9324_REG_ADV_CTRL0, SX9324_REG_ADV_CTRL20), + regmap_reg_range(SX9324_REG_PHASE_SEL, SX9324_REG_PHASE_SEL), + regmap_reg_range(SX9324_REG_OFFSET_MSB, SX9324_REG_OFFSET_LSB), + regmap_reg_range(SX9324_REG_RESET, SX9324_REG_RESET), +}; + +static const struct regmap_access_table sx9324_writeable_regs = { + .yes_ranges = sx9324_writable_reg_ranges, + .n_yes_ranges = ARRAY_SIZE(sx9324_writable_reg_ranges), +}; + +/* + * All allocated registers are readable, so we just list unallocated + * ones. + */ +static const struct regmap_range sx9324_non_readable_reg_ranges[] = { + regmap_reg_range(SX9324_REG_IRQ_CFG2 + 1, SX9324_REG_GNRL_CTRL0 - 1), + regmap_reg_range(SX9324_REG_GNRL_CTRL1 + 1, SX9324_REG_AFE_CTRL0 - 1), + regmap_reg_range(SX9324_REG_AFE_CTRL9 + 1, SX9324_REG_PROX_CTRL0 - 1), + regmap_reg_range(SX9324_REG_PROX_CTRL7 + 1, SX9324_REG_ADV_CTRL0 - 1), + regmap_reg_range(SX9324_REG_ADV_CTRL20 + 1, SX9324_REG_PHASE_SEL - 1), + regmap_reg_range(SX9324_REG_SAR_LSB + 1, SX9324_REG_RESET - 1), + regmap_reg_range(SX9324_REG_RESET + 1, SX9324_REG_WHOAMI - 1), + regmap_reg_range(SX9324_REG_WHOAMI + 1, SX9324_REG_REVISION - 1), +}; + +static const struct regmap_access_table sx9324_readable_regs = { + .no_ranges = sx9324_non_readable_reg_ranges, + .n_no_ranges = ARRAY_SIZE(sx9324_non_readable_reg_ranges), +}; + +static const struct regmap_range sx9324_volatile_reg_ranges[] = { + regmap_reg_range(SX9324_REG_IRQ_SRC, SX9324_REG_STAT3), + regmap_reg_range(SX9324_REG_USEFUL_MSB, SX9324_REG_DIFF_LSB), + regmap_reg_range(SX9324_REG_SAR_MSB, SX9324_REG_SAR_LSB), + regmap_reg_range(SX9324_REG_WHOAMI, SX9324_REG_WHOAMI), + regmap_reg_range(SX9324_REG_REVISION, SX9324_REG_REVISION), +}; + +static const struct regmap_access_table sx9324_volatile_regs = { + .yes_ranges = sx9324_volatile_reg_ranges, + .n_yes_ranges = ARRAY_SIZE(sx9324_volatile_reg_ranges), +}; + +static const struct regmap_config sx9324_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = SX9324_REG_REVISION, + .cache_type = REGCACHE_RBTREE, + + .wr_table = &sx9324_writeable_regs, + .rd_table = &sx9324_readable_regs, + .volatile_table = &sx9324_volatile_regs, +}; + +static int sx9324_read_prox_data(struct sx_common_data *data, + const struct iio_chan_spec *chan, + __be16 *val) +{ + int ret; + + ret = regmap_write(data->regmap, SX9324_REG_PHASE_SEL, chan->channel); + if (ret < 0) + return ret; + + return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val)); +} + +/* + * If we have no interrupt support, we have to wait for a scan period + * after enabling a channel to get a result. + */ +static int sx9324_wait_for_sample(struct sx_common_data *data) +{ + int ret; + unsigned int val; + + ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL0, &val); + if (ret < 0) + return ret; + val = FIELD_GET(SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, val); + + msleep(sx9324_scan_period_table[val]); + + return 0; +} + +static int sx9324_read_gain(struct sx_common_data *data, + const struct iio_chan_spec *chan, int *val) +{ + unsigned int reg, regval; + int ret; + + reg = SX9324_REG_PROX_CTRL0 + chan->channel / 2; + ret = regmap_read(data->regmap, reg, ®val); + if (ret) + return ret; + + *val = 1 << FIELD_GET(SX9324_REG_PROX_CTRL0_GAIN_MASK, regval); + + return IIO_VAL_INT; +} + +static int sx9324_read_samp_freq(struct sx_common_data *data, + int *val, int *val2) +{ + int ret; + unsigned int regval; + + ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL0, ®val); + if (ret) + return ret; + + regval = FIELD_GET(SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, regval); + *val = sx9324_samp_freq_table[regval].val; + *val2 = sx9324_samp_freq_table[regval].val2; + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int sx9324_read_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct sx_common_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = sx_common_read_proximity(data, chan, val); + iio_device_release_direct_mode(indio_dev); + return ret; + case IIO_CHAN_INFO_HARDWAREGAIN: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = sx9324_read_gain(data, chan, val); + iio_device_release_direct_mode(indio_dev); + return ret; + case IIO_CHAN_INFO_SAMP_FREQ: + return sx9324_read_samp_freq(data, val, val2); + default: + return -EINVAL; + } +} + +static const int sx9324_gain_vals[] = { 1, 2, 4, 8 }; + +static int sx9324_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + if (chan->type != IIO_PROXIMITY) + return -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_HARDWAREGAIN: + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(sx9324_gain_vals); + *vals = sx9324_gain_vals; + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_SAMP_FREQ: + *type = IIO_VAL_INT_PLUS_MICRO; + *length = ARRAY_SIZE(sx9324_samp_freq_table) * 2; + *vals = (int *)sx9324_samp_freq_table; + return IIO_AVAIL_LIST; + } + + return -EINVAL; +} + +static int sx9324_set_samp_freq(struct sx_common_data *data, + int val, int val2) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(sx9324_samp_freq_table); i++) + if (val == sx9324_samp_freq_table[i].val && + val2 == sx9324_samp_freq_table[i].val2) + break; + + if (i == ARRAY_SIZE(sx9324_samp_freq_table)) + return -EINVAL; + + mutex_lock(&data->mutex); + + ret = regmap_update_bits(data->regmap, + SX9324_REG_GNRL_CTRL0, + SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, i); + + mutex_unlock(&data->mutex); + + return ret; +} + +static int sx9324_read_thresh(struct sx_common_data *data, + const struct iio_chan_spec *chan, int *val) +{ + unsigned int regval; + unsigned int reg; + int ret; + + /* + * TODO(gwendal): Depending on the phase function + * (proximity/table/body), retrieve the right threshold. + */ + reg = SX9324_REG_PROX_CTRL6 + chan->channel / 2; + ret = regmap_read(data->regmap, reg, ®val); + if (ret) + return ret; + + if (regval <= 1) + *val = regval; + else + *val = (regval * regval) / 2; + + return IIO_VAL_INT; +} + +static int sx9324_read_hysteresis(struct sx_common_data *data, + const struct iio_chan_spec *chan, int *val) +{ + unsigned int regval, pthresh; + int ret; + + ret = sx9324_read_thresh(data, chan, &pthresh); + if (ret < 0) + return ret; + + ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, ®val); + if (ret) + return ret; + + regval = FIELD_GET(SX9324_REG_PROX_CTRL5_HYST_MASK, regval); + if (!regval) + *val = 0; + else + *val = pthresh >> (5 - regval); + + return IIO_VAL_INT; +} + +static int sx9324_read_far_debounce(struct sx_common_data *data, int *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, ®val); + if (ret) + return ret; + + regval = FIELD_GET(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, regval); + if (regval) + *val = 1 << regval; + else + *val = 0; + + return IIO_VAL_INT; +} + +static int sx9324_read_close_debounce(struct sx_common_data *data, int *val) +{ + unsigned int regval; + int ret; + + ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, ®val); + if (ret) + return ret; + + regval = FIELD_GET(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, regval); + if (regval) + *val = 1 << regval; + else + *val = 0; + + return IIO_VAL_INT; +} + +static int sx9324_read_event_val(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, int *val, int *val2) +{ + struct sx_common_data *data = iio_priv(indio_dev); + + if (chan->type != IIO_PROXIMITY) + return -EINVAL; + + switch (info) { + case IIO_EV_INFO_VALUE: + return sx9324_read_thresh(data, chan, val); + case IIO_EV_INFO_PERIOD: + switch (dir) { + case IIO_EV_DIR_RISING: + return sx9324_read_far_debounce(data, val); + case IIO_EV_DIR_FALLING: + return sx9324_read_close_debounce(data, val); + default: + return -EINVAL; + } + case IIO_EV_INFO_HYSTERESIS: + return sx9324_read_hysteresis(data, chan, val); + default: + return -EINVAL; + } +} + +static int sx9324_write_thresh(struct sx_common_data *data, + const struct iio_chan_spec *chan, int val) +{ + unsigned int reg; + int ret; + + reg = SX9324_REG_PROX_CTRL6 + chan->channel / 2; + + if (val >= 1) + val = int_sqrt(2 * val); + + if (val > 0xff) + return -EINVAL; + + mutex_lock(&data->mutex); + ret = regmap_write(data->regmap, reg, val); + mutex_unlock(&data->mutex); + + return ret; +} + +static int sx9324_write_hysteresis(struct sx_common_data *data, + const struct iio_chan_spec *chan, int _val) +{ + unsigned int hyst, val = _val; + int ret, pthresh; + + ret = sx9324_read_thresh(data, chan, &pthresh); + if (ret < 0) + return ret; + + if (val == 0) + hyst = 0; + else if (val >= pthresh >> 2) + hyst = 3; + else if (val >= pthresh >> 3) + hyst = 2; + else if (val >= pthresh >> 4) + hyst = 1; + else + return -EINVAL; + + hyst = FIELD_PREP(SX9324_REG_PROX_CTRL5_HYST_MASK, hyst); + mutex_lock(&data->mutex); + ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, + SX9324_REG_PROX_CTRL5_HYST_MASK, hyst); + mutex_unlock(&data->mutex); + + return ret; +} + +static int sx9324_write_far_debounce(struct sx_common_data *data, int val) +{ + unsigned int regval; + int ret; + + if (val > 0) + val = ilog2(val); + if (!FIELD_FIT(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, val)) + return -EINVAL; + + regval = FIELD_PREP(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, val); + + mutex_lock(&data->mutex); + ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, + SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, + regval); + mutex_unlock(&data->mutex); + + return ret; +} + +static int sx9324_write_close_debounce(struct sx_common_data *data, int val) +{ + unsigned int regval; + int ret; + + if (val > 0) + val = ilog2(val); + if (!FIELD_FIT(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, val)) + return -EINVAL; + + regval = FIELD_PREP(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, val); + + mutex_lock(&data->mutex); + ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, + SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, + regval); + mutex_unlock(&data->mutex); + + return ret; +} + +static int sx9324_write_event_val(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, int val, int val2) +{ + struct sx_common_data *data = iio_priv(indio_dev); + + if (chan->type != IIO_PROXIMITY) + return -EINVAL; + + switch (info) { + case IIO_EV_INFO_VALUE: + return sx9324_write_thresh(data, chan, val); + case IIO_EV_INFO_PERIOD: + switch (dir) { + case IIO_EV_DIR_RISING: + return sx9324_write_far_debounce(data, val); + case IIO_EV_DIR_FALLING: + return sx9324_write_close_debounce(data, val); + default: + return -EINVAL; + } + case IIO_EV_INFO_HYSTERESIS: + return sx9324_write_hysteresis(data, chan, val); + default: + return -EINVAL; + } +} + +static int sx9324_write_gain(struct sx_common_data *data, + const struct iio_chan_spec *chan, int val) +{ + unsigned int gain, reg; + int ret; + + gain = ilog2(val); + reg = SX9324_REG_PROX_CTRL0 + chan->channel / 2; + gain = FIELD_PREP(SX9324_REG_PROX_CTRL0_GAIN_MASK, gain); + + mutex_lock(&data->mutex); + ret = regmap_update_bits(data->regmap, reg, + SX9324_REG_PROX_CTRL0_GAIN_MASK, + gain); + mutex_unlock(&data->mutex); + + return ret; +} + +static int sx9324_write_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, int val, int val2, + long mask) +{ + struct sx_common_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return sx9324_set_samp_freq(data, val, val2); + case IIO_CHAN_INFO_HARDWAREGAIN: + return sx9324_write_gain(data, chan, val); + } + + return -EINVAL; +} + +/* Activate all channels and perform an initial compensation. */ +static int sx9324_init_compensation(struct iio_dev *indio_dev) +{ + struct sx_common_data *data = iio_priv(indio_dev); + unsigned int val; + int ret; + + /* run the compensation phase on all channels */ + ret = regmap_update_bits(data->regmap, SX9324_REG_STAT2, + SX9324_REG_STAT2_COMPSTAT_MASK, + SX9324_REG_STAT2_COMPSTAT_MASK); + if (ret) + return ret; + + ret = regmap_read_poll_timeout(data->regmap, SX9324_REG_STAT2, val, + !(val & SX9324_REG_STAT2_COMPSTAT_MASK), + 20000, 2000000); + if (ret == -ETIMEDOUT) + dev_err(&data->client->dev, + "initial compensation timed out: 0x%02x\n", + val); + return ret; +} + +static int sx9324_check_whoami(struct device *dev, + struct iio_dev *indio_dev) +{ + struct sx_common_data *data = iio_priv(indio_dev); + unsigned int long ddata; + unsigned int whoami; + int ret; + + ret = regmap_read(data->regmap, SX9324_REG_WHOAMI, &whoami); + if (ret) { + dev_err(dev, "error in reading WHOAMI register: %d", ret); + return ret; + } + + ddata = (uintptr_t)device_get_match_data(dev); + if (ddata != whoami) { + dev_err(dev, "WHOAMI does not match device data: %u\n", whoami); + return -ENODEV; + } + + switch (whoami) { + case SX9324_WHOAMI_VALUE: + indio_dev->name = "sx9324"; + break; + default: + dev_err(dev, "unexpected WHOAMI response: %u\n", whoami); + return -ENODEV; + } + + return 0; +} + +static const struct sx_common_chip_info sx9324_chip_info = { + .reg_stat = SX9324_REG_STAT0, + .reg_irq_msk = SX9324_REG_IRQ_MSK, + .reg_enable_chan = SX9324_REG_GNRL_CTRL1, + .reg_reset = SX9324_REG_RESET, + + .mask_enable_chan = SX9324_REG_GNRL_CTRL1_PHEN_MASK, + .irq_msk_offset = 3, + .num_channels = SX9324_NUM_CHANNELS, + + .ops = { + .read_prox_data = sx9324_read_prox_data, + .check_whoami = sx9324_check_whoami, + .init_compensation = sx9324_init_compensation, + .wait_for_sample = sx9324_wait_for_sample, + }, + + .iio_channels = sx9324_channels, + .num_iio_channels = ARRAY_SIZE(sx9324_channels), + .iio_info = { + .read_raw = sx9324_read_raw, + .read_avail = sx9324_read_avail, + .read_event_value = sx9324_read_event_val, + .write_event_value = sx9324_write_event_val, + .write_raw = sx9324_write_raw, + .read_event_config = sx_common_read_event_config, + .write_event_config = sx_common_write_event_config, + }, +}; + +static int sx9324_probe(struct i2c_client *client) +{ + return sx_common_probe(client, &sx9324_chip_info, &sx9324_regmap_config); +} + +static int __maybe_unused sx9324_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct sx_common_data *data = iio_priv(indio_dev); + unsigned int regval; + int ret; + + mutex_lock(&data->mutex); + ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL1, ®val); + + data->suspend_ctrl = + FIELD_GET(SX9324_REG_GNRL_CTRL1_PHEN_MASK, regval); + + if (ret < 0) + goto out; + + // disable all phases, send the device to sleep + ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, 0); + +out: + mutex_unlock(&data->mutex); + return ret; +} + +static int __maybe_unused sx9324_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct sx_common_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, + data->suspend_ctrl | SX9324_REG_GNRL_CTRL1_PAUSECTRL); + mutex_unlock(&data->mutex); + + return ret; +} + +static const struct dev_pm_ops sx9324_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(sx9324_suspend, sx9324_resume) +}; + +static const struct acpi_device_id sx9324_acpi_match[] = { + { "STH9324", SX9324_WHOAMI_VALUE}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, sx9324_acpi_match); + +static const struct of_device_id sx9324_of_match[] = { + { .compatible = "semtech,sx9324", (void *)SX9324_WHOAMI_VALUE}, + { } +}; +MODULE_DEVICE_TABLE(of, sx9324_of_match); + +static const struct i2c_device_id sx9324_id[] = { + {"sx9324", SX9324_WHOAMI_VALUE}, + { }, +}; +MODULE_DEVICE_TABLE(i2c, sx9324_id); + +static struct i2c_driver sx9324_driver = { + .driver = { + .name = SX9324_DRIVER_NAME, + .acpi_match_table = ACPI_PTR(sx9324_acpi_match), + .of_match_table = of_match_ptr(sx9324_of_match), + .pm = &sx9324_pm_ops, + + /* + * Lots of i2c transfers in probe + over 200 ms waiting in + * sx9324_init_compensation() mean a slow probe; prefer async + * so we don't delay boot if we're builtin to the kernel. + */ + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .probe_new = sx9324_probe, + .id_table = sx9324_id, +}; +module_i2c_driver(sx9324_driver); + +MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>"); +MODULE_DESCRIPTION("Driver for Semtech SX9324 proximity sensor"); +MODULE_LICENSE("GPL v2");
Semtech SAR sensor SX9324 is an evolution of the SX9310: It has 4 phases that can be configure to capture and process data from any of 3 CS pins and provide independent detection: proximity, table proximity or body proximity. Gather antenna data: echo sx9324-dev3 > trigger/current_trigger echo 1 > scan_elements/in_proximity0_en echo 1 > buffer/enable od -v -An --endian=big -t d2 -w2 /dev/iio\:device3 (at 10Hz, the default). Trigger events: Setting: thresh_falling_period: 2 (events) thresh_rising_period: 2 (events) in_proximity0_thresh_either_value: 300 in_proximity0_thresh_either_hysteresis: 72 using iio_event_monitor /dev/iio\:deviceX, approaching my hand to the antenna pad, I see: ... Event: time: 1634763907532035297, type: proximity, channel: 0, evtype: thresh, direction: falling Event: time: 1634763910138104640, type: proximity, channel: 0, evtype: thresh, direction: rising ... Signed-off-by: Gwendal Grignou <gwendal@chromium.org> --- Changes in v2: - Use new interface with sx_common. - Document phase configuration parameter. - Define phase configuration parameter in channel. - Only Add needed changes in Kconfig and Makefile. - Use read_avail to define available frequencies .../ABI/testing/sysfs-bus-iio-sx9324 | 29 + drivers/iio/proximity/Kconfig | 14 + drivers/iio/proximity/Makefile | 1 + drivers/iio/proximity/sx9324.c | 931 ++++++++++++++++++ 4 files changed, 975 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sx9324 create mode 100644 drivers/iio/proximity/sx9324.c