[v3,3/4] dt-bindings: iio: Add sx9360 binding

Commit Message

Gwendal Grignou Dec. 13, 2021, 2:40 a.m. UTC

Add binding to configure Semtech sx9360 sensor.
It is a simpler version of sx9324.

Signed-off-by: Gwendal Grignou <[e-mail]>
---
Changes since v2:
- Use const instead of single enum.
- Use proper syntax for maximum/minimum
- Fix spelling errors.

Changes since v1:
- Fix cut and paste error.
- Add . at end of sentence.

 .../iio/proximity/semtech,sx9360.yaml         | 89 +++++++++++++++++++
 1 file changed, 89 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml

Comments

Stephen Boyd Dec. 15, 2021, 1:15 a.m. UTC | #1

Quoting Gwendal Grignou (2021-12-12 18:40:56)
> Add binding to configure Semtech sx9360 sensor.
> It is a simpler version of sx9324.
>
> Signed-off-by: Gwendal Grignou <[e-mail]>
> ---

Reviewed-by: Stephen Boyd <[e-mail]>

Rob Herring (Arm) Dec. 15, 2021, 8:09 p.m. UTC | #2

On Sun, 12 Dec 2021 18:40:56 -0800, Gwendal Grignou wrote:
> Add binding to configure Semtech sx9360 sensor.
> It is a simpler version of sx9324.
> 
> Signed-off-by: Gwendal Grignou <[e-mail]>
> ---
> Changes since v2:
> - Use const instead of single enum.
> - Use proper syntax for maximum/minimum
> - Fix spelling errors.
> 
> Changes since v1:
> - Fix cut and paste error.
> - Add . at end of sentence.
> 
>  .../iio/proximity/semtech,sx9360.yaml         | 89 +++++++++++++++++++
>  1 file changed, 89 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
> 

Reviewed-by: Rob Herring <[e-mail]>

Patch

diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
new file mode 100644
index 00000000000000..63e1a1fd00d4ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
@@ -0,0 +1,89 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9360 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <[e-mail]>
+  - Daniel Campello <[e-mail]>
+
+description: |
+  Semtech's SX9360 proximity sensor.
+
+properties:
+  compatible:
+    const: semtech,sx9360
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For both phases, "reference" and
+      "measurement". Higher the number, higher the resolution.
+    default: 128
+
+  semtech,proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      PROXRAW filter strength for both phases. A value of 0 represents off,
+      and other values represent 1-1/2^N.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description: |
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9360";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,resolution = <256>;
+        semtech,proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+      };
+    };