new file mode 100644
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2688 DAC
+
+maintainers:
+ - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+ Analog Devices LTC2688 16 channel, 16 bit, +-15V DAC
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2688.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ltc2688
+
+ reg:
+ maxItems: 1
+
+ vcc-supply:
+ description: Analog Supply Voltage Input.
+
+ iovcc-supply:
+ description: Digital Input/Output Supply Voltage.
+
+ vref-supply:
+ description:
+ Reference Input/Output. The voltage at the REF pin sets the full-scale
+ range of all channels. If not provided the internal reference is used and
+ also provided on the VREF pin".
+
+ clr-gpios:
+ description:
+ If specified, it will be asserted during driver probe. As the line is
+ active low, it should be marked GPIO_ACTIVE_LOW.
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^channel@([0-9]|1[0-5])$":
+ type: object
+
+ properties:
+ reg:
+ description: The channel number representing the DAC output channel.
+ maximum: 15
+
+ adi,toggle-mode:
+ description:
+ Set the channel as a toggle enabled channel. Toggle operation enables
+ fast switching of a DAC output between two different DAC codes without
+ any SPI transaction.
+ type: boolean
+
+ adi,output-range-microvolt:
+ description: Specify the channel output full scale range.
+ oneOf:
+ - items:
+ - const: 0
+ - enum: [5000000, 10000000]
+ - items:
+ - const: -5000000
+ - const: 5000000
+ - items:
+ - const: -10000000
+ - const: 10000000
+ - items:
+ - const: -15000000
+ - const: 15000000
+
+ adi,overrange:
+ description: Enable 5% overrange over the selected full scale range.
+ type: boolean
+
+ clocks:
+ maxItems: 1
+
+ adi,toggle-dither-input:
+ description:
+ Selects the TGPx pin to be associated with this channel. This setting
+ only makes sense for toggle or dither enabled channels. If
+ @adi,toggle-mode is not set and this property is given, the channel is
+ assumed to be a dither capable channel. Note that multiple channels
+ can be mapped to the same pin. If this setting is given, the
+ respective @clock must also be provided. Mappings between this and
+ input pins
+ 0 - TGP1
+ 1 - TGP2
+ 2 - TGP3
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+
+ dependencies:
+ adi,toggle-dither-input: [ clocks ]
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ltc2688: ltc2688@0 {
+ compatible = "adi,ltc2688";
+ reg = <0>;
+
+ vcc-supply = <&vcc>;
+ iovcc-supply = <&vcc>;
+ vref-supply = <&vref>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@0 {
+ reg = <0>;
+ adi,toggle-mode;
+ adi,overrange;
+ };
+
+ channel@1 {
+ reg = <1>;
+ adi,output-range-microvolt = <0 10000000>;
+
+ clocks = <&clock_tgp3>;
+ adi,toggle-dither-input = <2>;
+ };
+ };
+ };
+
+...
@@ -11315,6 +11315,7 @@ L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
+F: Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
F: drivers/iio/dac/ltc2688.c
LTC2947 HARDWARE MONITOR DRIVER