[v10,2/9] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients

Message ID	20220305021247.1020122-3-caleb.connolly@linaro.org (mailing list archive)
State	Superseded
Headers	show Return-Path: <linux-iio-owner@kernel.org> From: Caleb Connolly <caleb.connolly@linaro.org> To: caleb.connolly@linaro.org, Jonathan Cameron <jic23@kernel.org>, Lars-Peter Clausen <lars@metafoo.de>, Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Lee Jones <lee.jones@linaro.org>, Stephen Boyd <sboyd@kernel.org>, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: sumit.semwal@linaro.org, amit.pundir@linaro.org, john.stultz@linaro.org Subject: [PATCH v10 2/9] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients Date: Sat, 5 Mar 2022 02:12:40 +0000 Message-Id: <20220305021247.1020122-3-caleb.connolly@linaro.org> In-Reply-To: <20220305021247.1020122-1-caleb.connolly@linaro.org> References: <20220305021247.1020122-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	iio: adc: introduce Qualcomm SPMI Round Robin ADC \| expand [v10,0/9] iio: adc: introduce Qualcomm SPMI Round Robin ADC [v10,1/9] spmi: add a helper to look up an SPMI device from a device node [v10,2/9] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients [v10,3/9] mfd: qcom-spmi-pmic: read fab id on supported PMICs [v10,4/9] dt-bindings: iio: adc: document qcom-spmi-rradc [v10,5/9] iio: adc: qcom-spmi-rradc: introduce round robin adc [v10,6/9] arm64: dts: qcom: pmi8998: add rradc node [v10,7/9] arm64: dts: qcom: sdm845-oneplus: enable rradc [v10,8/9] arm64: dts: qcom: sdm845-db845c: enable rradc [v10,9/9] arm64: dts: qcom: sdm845-xiaomi-beryllium: enable rradc

diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c index 1cacc00aa6c9..bfe1304aee1b 100644 --- a/drivers/mfd/qcom-spmi-pmic.c +++ b/drivers/mfd/qcom-spmi-pmic.c @@ -3,11 +3,16 @@ * Copyright (c) 2014, The Linux Foundation. All rights reserved. */ +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/spmi.h> +#include <linux/types.h> #include <linux/regmap.h> #include <linux/of_platform.h> +#include <soc/qcom/qcom-spmi-pmic.h> #define PMIC_REV2 0x101 #define PMIC_REV3 0x102 @@ -17,106 +22,158 @@ #define PMIC_TYPE_VALUE 0x51 -#define COMMON_SUBTYPE 0x00 -#define PM8941_SUBTYPE 0x01 -#define PM8841_SUBTYPE 0x02 -#define PM8019_SUBTYPE 0x03 -#define PM8226_SUBTYPE 0x04 -#define PM8110_SUBTYPE 0x05 -#define PMA8084_SUBTYPE 0x06 -#define PMI8962_SUBTYPE 0x07 -#define PMD9635_SUBTYPE 0x08 -#define PM8994_SUBTYPE 0x09 -#define PMI8994_SUBTYPE 0x0a -#define PM8916_SUBTYPE 0x0b -#define PM8004_SUBTYPE 0x0c -#define PM8909_SUBTYPE 0x0d -#define PM8028_SUBTYPE 0x0e -#define PM8901_SUBTYPE 0x0f -#define PM8950_SUBTYPE 0x10 -#define PMI8950_SUBTYPE 0x11 -#define PM8998_SUBTYPE 0x14 -#define PMI8998_SUBTYPE 0x15 -#define PM8005_SUBTYPE 0x18 -#define PM660L_SUBTYPE 0x1A -#define PM660_SUBTYPE 0x1B -#define PM8150_SUBTYPE 0x1E -#define PM8150L_SUBTYPE 0x1f -#define PM8150B_SUBTYPE 0x20 -#define PMK8002_SUBTYPE 0x21 -#define PM8009_SUBTYPE 0x24 -#define PM8150C_SUBTYPE 0x26 -#define SMB2351_SUBTYPE 0x29 +struct qcom_spmi_dev { + int num_usids; + struct qcom_spmi_pmic pmic; +}; + +#define N_USIDS(n) ((void *)n) static const struct of_device_id pmic_spmi_id_table[] = { - { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, - { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, - { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, - { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, - { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE }, - { .compatible = "qcom,pm8028", .data = (void *)PM8028_SUBTYPE }, - { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE }, - { .compatible = "qcom,pm8150", .data = (void *)PM8150_SUBTYPE }, - { .compatible = "qcom,pm8150b", .data = (void *)PM8150B_SUBTYPE }, - { .compatible = "qcom,pm8150c", .data = (void *)PM8150C_SUBTYPE }, - { .compatible = "qcom,pm8150l", .data = (void *)PM8150L_SUBTYPE }, - { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, - { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, - { .compatible = "qcom,pm8901", .data = (void *)PM8901_SUBTYPE }, - { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE }, - { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, - { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, - { .compatible = "qcom,pm8950", .data = (void *)PM8950_SUBTYPE }, - { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE }, - { .compatible = "qcom,pm8998", .data = (void *)PM8998_SUBTYPE }, - { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE }, - { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE }, - { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE }, - { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, - { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, - { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE }, - { .compatible = "qcom,pmk8002", .data = (void *)PMK8002_SUBTYPE }, - { .compatible = "qcom,smb2351", .data = (void *)SMB2351_SUBTYPE }, - { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, + { .compatible = "qcom,pm660", .data = N_USIDS(2) }, + { .compatible = "qcom,pm660l", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8004", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8005", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8019", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8028", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8110", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8150", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8150b", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8150c", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8150l", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8226", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8841", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8901", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8909", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8916", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8941", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8950", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8994", .data = N_USIDS(2) }, + { .compatible = "qcom,pm8998", .data = N_USIDS(2) }, + { .compatible = "qcom,pma8084", .data = N_USIDS(2) }, + { .compatible = "qcom,pmd9635", .data = N_USIDS(2) }, + { .compatible = "qcom,pmi8950", .data = N_USIDS(2) }, + { .compatible = "qcom,pmi8962", .data = N_USIDS(2) }, + { .compatible = "qcom,pmi8994", .data = N_USIDS(2) }, + { .compatible = "qcom,pmi8998", .data = N_USIDS(2) }, + { .compatible = "qcom,pmk8002", .data = N_USIDS(2) }, + { .compatible = "qcom,smb2351", .data = N_USIDS(2) }, + { .compatible = "qcom,spmi-pmic", .data = N_USIDS(1) }, { } }; -static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) +#undef N_USIDS + +/* + * A PMIC can be represented by multiple SPMI devices, but + * only the base PMIC device will contain a reference to + * the revision information. + * + * This function takes a pointer to a function device and + * returns a pointer to the base PMIC device. + * + * This only supports PMICs with 1 or 2 USIDs. + */ +static struct spmi_device *qcom_pmic_get_base_usid(struct device *dev) { - unsigned int rev2, minor, major, type, subtype; - const char *name = "unknown"; - int ret, i; + struct spmi_device *sdev; + struct qcom_spmi_dev *ctx; + struct device_node *spmi_bus; + struct device_node *other_usid = NULL; + int function_parent_usid, ret; + u32 pmic_addr; - ret = regmap_read(map, PMIC_TYPE, &type); - if (ret < 0) - return; + if (!of_match_device(pmic_spmi_id_table, dev)) + return ERR_PTR(-EINVAL); + + sdev = to_spmi_device(dev); + ctx = spmi_device_get_drvdata(sdev); + + dev_info(dev, "CA: num_usids=%d, subtype=0x%x\n", ctx->num_usids, + ctx->pmic.subtype); + + /* + * Quick return if the function device is already in the base + * USID. This will always be hit for PMICs with only 1 USID. + */ + if (sdev->usid % ctx->num_usids == 0) + return sdev; + + function_parent_usid = sdev->usid; + dev_info(dev, "CA: function_parent_usid=%d\n", function_parent_usid); + + /* + * Walk through the list of PMICs until we find the sibling USID. + * The goal is to find the first USID which is less than the + * number of USIDs in the PMIC away, e.g. for a PMIC with 2 USIDs + * where the function device is under USID 3, we want to find the + * device for USID 2. + */ + spmi_bus = of_get_parent(sdev->dev.of_node); + do { + other_usid = of_get_next_child(spmi_bus, other_usid); + ret = of_property_read_u32_index(other_usid, "reg", 0, &pmic_addr); + dev_info(dev, "CA: other_usid=%s, pmic_addr=0x%x, ret=%d\n", + other_usid->name, pmic_addr, ret); + if (ret) + return ERR_PTR(ret); + sdev = spmi_device_from_of(other_usid); + if (sdev == NULL) { + dev_info(dev, "CA: sdev null"); + /* + * If the base USID for this PMIC hasn't probed yet + * but the secondary USID has, then we need to defer + * the function driver so that it will attempt to + * probe again when the base USID is ready. + */ + if (pmic_addr == function_parent_usid - (ctx->num_usids - 1)) + return ERR_PTR(-EPROBE_DEFER); + + continue; + } + + if (pmic_addr == function_parent_usid - (ctx->num_usids - 1)) + return sdev; + } while (other_usid->sibling); + + return ERR_PTR(-ENODATA); +} - if (type != PMIC_TYPE_VALUE) - return; +static inline void pmic_print_info(struct device *dev, struct qcom_spmi_pmic *pmic) +{ + dev_dbg(dev, "%x: %s v%d.%d\n", + pmic->subtype, pmic->name, pmic->major, pmic->minor); +} + +static int pmic_spmi_load_revid(struct regmap *map, struct device *dev, + struct qcom_spmi_pmic *pmic) +{ + int ret; - ret = regmap_read(map, PMIC_SUBTYPE, &subtype); + ret = regmap_read(map, PMIC_TYPE, &pmic->type); if (ret < 0) - return; + return ret; - for (i = 0; i < ARRAY_SIZE(pmic_spmi_id_table); i++) { - if (subtype == (unsigned long)pmic_spmi_id_table[i].data) - break; - } + if (pmic->type != PMIC_TYPE_VALUE) + return ret; + + ret = regmap_read(map, PMIC_SUBTYPE, &pmic->subtype); + if (ret < 0) + return ret; - if (i != ARRAY_SIZE(pmic_spmi_id_table)) - name = pmic_spmi_id_table[i].compatible; + pmic->name = of_match_device(pmic_spmi_id_table, dev)->compatible; - ret = regmap_read(map, PMIC_REV2, &rev2); + ret = regmap_read(map, PMIC_REV2, &pmic->rev2); if (ret < 0) - return; + return ret; - ret = regmap_read(map, PMIC_REV3, &minor); + ret = regmap_read(map, PMIC_REV3, &pmic->minor); if (ret < 0) - return; + return ret; - ret = regmap_read(map, PMIC_REV4, &major); + ret = regmap_read(map, PMIC_REV4, &pmic->major); if (ret < 0) - return; + return ret; /* * In early versions of PM8941 and PM8226, the major revision number @@ -124,16 +181,35 @@ static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) * Increment the major revision number here if the chip is an early * version of PM8941 or PM8226. */ - if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) && - major < 0x02) - major++; + if ((pmic->subtype == PM8941_SUBTYPE || pmic->subtype == PM8226_SUBTYPE) && + pmic->major < 0x02) + pmic->major++; + + if (pmic->subtype == PM8110_SUBTYPE) + pmic->minor = pmic->rev2; - if (subtype == PM8110_SUBTYPE) - minor = rev2; + pmic_print_info(dev, pmic); - dev_dbg(dev, "%x: %s v%d.%d\n", subtype, name, major, minor); + return 0; } +/** + * qcom_pmic_get() - Get a pointer to the base PMIC device + * + * @dev: the pmic function device + * @return: the struct qcom_spmi_pmic* pointer associated with the function device + */ +inline const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev) +{ + struct spmi_device *sdev = qcom_pmic_get_base_usid(dev->parent); + + if (IS_ERR(sdev)) + return ERR_CAST(sdev); + + return &((struct qcom_spmi_dev *)spmi_device_get_drvdata(sdev))->pmic; +} +EXPORT_SYMBOL(qcom_pmic_get); + static const struct regmap_config spmi_regmap_config = { .reg_bits = 16, .val_bits = 8, @@ -144,14 +220,26 @@ static const struct regmap_config spmi_regmap_config = { static int pmic_spmi_probe(struct spmi_device *sdev) { struct regmap *regmap; + struct qcom_spmi_dev *ctx; + int ret; regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config); if (IS_ERR(regmap)) return PTR_ERR(regmap); + ctx = devm_kzalloc(&sdev->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->num_usids = (long)of_device_get_match_data(&sdev->dev); + /* Only the first slave id for a PMIC contains this information */ - if (sdev->usid % 2 == 0) - pmic_spmi_show_revid(regmap, &sdev->dev); + if (sdev->usid % ctx->num_usids == 0) { + ret = pmic_spmi_load_revid(regmap, &sdev->dev, &ctx->pmic); + if (ret < 0) + return ret; + } + spmi_device_set_drvdata(sdev, ctx); return devm_of_platform_populate(&sdev->dev); } diff --git a/include/soc/qcom/qcom-spmi-pmic.h b/include/soc/qcom/qcom-spmi-pmic.h new file mode 100644 index 000000000000..5400e6509fe8 --- /dev/null +++ b/include/soc/qcom/qcom-spmi-pmic.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright (c) 2021 Linaro. All rights reserved. + * Copyright (c) 2021 Caleb Connolly <caleb.connolly@linaro.org> + */ + +#ifndef __QCOM_SPMI_PMIC_H__ +#define __QCOM_SPMI_PMIC_H__ + +#define COMMON_SUBTYPE 0x00 +#define PM8941_SUBTYPE 0x01 +#define PM8841_SUBTYPE 0x02 +#define PM8019_SUBTYPE 0x03 +#define PM8226_SUBTYPE 0x04 +#define PM8110_SUBTYPE 0x05 +#define PMA8084_SUBTYPE 0x06 +#define PMI8962_SUBTYPE 0x07 +#define PMD9635_SUBTYPE 0x08 +#define PM8994_SUBTYPE 0x09 +#define PMI8994_SUBTYPE 0x0a +#define PM8916_SUBTYPE 0x0b +#define PM8004_SUBTYPE 0x0c +#define PM8909_SUBTYPE 0x0d +#define PM8028_SUBTYPE 0x0e +#define PM8901_SUBTYPE 0x0f +#define PM8950_SUBTYPE 0x10 +#define PMI8950_SUBTYPE 0x11 +#define PM8998_SUBTYPE 0x14 +#define PMI8998_SUBTYPE 0x15 +#define PM8005_SUBTYPE 0x18 +#define PM660L_SUBTYPE 0x1A +#define PM660_SUBTYPE 0x1B +#define PM8150_SUBTYPE 0x1E +#define PM8150L_SUBTYPE 0x1f +#define PM8150B_SUBTYPE 0x20 +#define PMK8002_SUBTYPE 0x21 +#define PM8009_SUBTYPE 0x24 +#define PM8150C_SUBTYPE 0x26 +#define SMB2351_SUBTYPE 0x29 + +#define PMI8998_FAB_ID_SMIC 0x11 +#define PMI8998_FAB_ID_GF 0x30 + +#define PM660_FAB_ID_GF 0x0 +#define PM660_FAB_ID_TSMC 0x2 +#define PM660_FAB_ID_MX 0x3 + +struct qcom_spmi_pmic { + unsigned int type; + unsigned int subtype; + unsigned int major; + unsigned int minor; + unsigned int rev2; + const char *name; +}; + +struct device; + +inline const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev); + +#endif /* __QCOM_SPMI_PMIC_H__ */

[v10,2/9] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients

Commit Message

Comments

Patch