@@ -227,7 +227,7 @@ struct ads1015_data {
unsigned int comp_mode;
struct ads1015_thresh_data thresh_data[ADS1015_CHANNELS];
- const unsigned int *data_rate;
+ const struct ads1015_chip_data *chip;
/*
* Set to true when the ADC is switched to the continuous-conversion
* mode and exits from a power-down state. This flag is used to avoid
@@ -368,6 +368,7 @@ static int ads1015_set_power_state(struct ads1015_data *data, bool on)
static
int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val)
{
+ const unsigned int *data_rate = data->chip->data_rate;
int ret, pga, dr, dr_old, conv_time;
unsigned int old, mask, cfg;
@@ -402,8 +403,8 @@ int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val)
}
if (data->conv_invalid) {
dr_old = (old & ADS1015_CFG_DR_MASK) >> ADS1015_CFG_DR_SHIFT;
- conv_time = DIV_ROUND_UP(USEC_PER_SEC, data->data_rate[dr_old]);
- conv_time += DIV_ROUND_UP(USEC_PER_SEC, data->data_rate[dr]);
+ conv_time = DIV_ROUND_UP(USEC_PER_SEC, data_rate[dr_old]);
+ conv_time += DIV_ROUND_UP(USEC_PER_SEC, data_rate[dr]);
conv_time += conv_time / 10; /* 10% internal clock inaccuracy */
usleep_range(conv_time, conv_time + 1);
data->conv_invalid = false;
@@ -470,7 +471,7 @@ static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate)
int i;
for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++) {
- if (data->data_rate[i] == rate) {
+ if (data->chip->data_rate[i] == rate) {
data->channel_data[chan].data_rate = i;
return 0;
}
@@ -528,7 +529,7 @@ static int ads1015_read_raw(struct iio_dev *indio_dev,
break;
case IIO_CHAN_INFO_SAMP_FREQ:
idx = data->channel_data[chan->address].data_rate;
- *val = data->data_rate[idx];
+ *val = data->chip->data_rate[idx];
ret = IIO_VAL_INT;
break;
default:
@@ -588,7 +589,7 @@ static int ads1015_read_event(struct iio_dev *indio_dev,
dr = data->channel_data[chan->address].data_rate;
comp_queue = data->thresh_data[chan->address].comp_queue;
period = ads1015_comp_queue[comp_queue] *
- USEC_PER_SEC / data->data_rate[dr];
+ USEC_PER_SEC / data->chip->data_rate[dr];
*val = period / USEC_PER_SEC;
*val2 = period % USEC_PER_SEC;
@@ -610,6 +611,7 @@ static int ads1015_write_event(struct iio_dev *indio_dev,
int val2)
{
struct ads1015_data *data = iio_priv(indio_dev);
+ const unsigned int *data_rate = data->chip->data_rate;
int realbits = chan->scan_type.realbits;
int ret = 0;
long long period;
@@ -635,7 +637,7 @@ static int ads1015_write_event(struct iio_dev *indio_dev,
for (i = 0; i < ARRAY_SIZE(ads1015_comp_queue) - 1; i++) {
if (period <= ads1015_comp_queue[i] *
- USEC_PER_SEC / data->data_rate[dr])
+ USEC_PER_SEC / data_rate[dr])
break;
}
data->thresh_data[chan->address].comp_queue = i;
@@ -989,7 +991,7 @@ static int ads1015_probe(struct i2c_client *client,
indio_dev->channels = chip->channels;
indio_dev->num_channels = chip->num_channels;
indio_dev->info = chip->info;
- data->data_rate = chip->data_rate;
+ data->chip = chip;
data->event_channel = ADS1015_CHANNELS;
/*
Instead of storing only data_rate in private data, store pointer to the whole chip data and use the data_rate from chip data throughout the driver. No functional change. This is done in preparation for switching to read_avail(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andy Shevchenko <andy@kernel.org> Cc: Daniel Baluta <daniel.baluta@nxp.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> --- V3: New patch V4: Use switching in commit message --- drivers/iio/adc/ti-ads1015.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)