@@ -80,6 +80,7 @@ enum chip_ids {
ADSXXXX = 0,
ADS1015,
ADS1115,
+ TLA2024,
};
enum ads1015_channels {
@@ -247,6 +248,22 @@ static const struct regmap_config ads1015_regmap_config = {
.wr_table = &ads1015_writeable_table,
};
+static const struct regmap_range tla2024_writeable_ranges[] = {
+ regmap_reg_range(ADS1015_CFG_REG, ADS1015_CFG_REG),
+};
+
+static const struct regmap_access_table tla2024_writeable_table = {
+ .yes_ranges = tla2024_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(tla2024_writeable_ranges),
+};
+
+static const struct regmap_config tla2024_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .max_register = ADS1015_CFG_REG,
+ .wr_table = &tla2024_writeable_table,
+};
+
static const struct iio_chan_spec ads1015_channels[] = {
ADS1015_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1, 12, 4,
ads1015_events, ARRAY_SIZE(ads1015_events)),
@@ -287,6 +304,19 @@ static const struct iio_chan_spec ads1115_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP),
};
+static const struct iio_chan_spec tla2024_channels[] = {
+ ADS1015_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1, 12, 4, NULL, 0),
+ ADS1015_V_DIFF_CHAN(0, 3, ADS1015_AIN0_AIN3, 12, 4, NULL, 0),
+ ADS1015_V_DIFF_CHAN(1, 3, ADS1015_AIN1_AIN3, 12, 4, NULL, 0),
+ ADS1015_V_DIFF_CHAN(2, 3, ADS1015_AIN2_AIN3, 12, 4, NULL, 0),
+ ADS1015_V_CHAN(0, ADS1015_AIN0, 12, 4, NULL, 0),
+ ADS1015_V_CHAN(1, ADS1015_AIN1, 12, 4, NULL, 0),
+ ADS1015_V_CHAN(2, ADS1015_AIN2, 12, 4, NULL, 0),
+ ADS1015_V_CHAN(3, ADS1015_AIN3, 12, 4, NULL, 0),
+ IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP),
+};
+
+
#ifdef CONFIG_PM
static int ads1015_set_power_state(struct ads1015_data *data, bool on)
{
@@ -823,6 +853,12 @@ static const struct iio_info ads1115_info = {
.attrs = &ads1115_attribute_group,
};
+static const struct iio_info tla2024_info = {
+ .read_raw = ads1015_read_raw,
+ .write_raw = ads1015_write_raw,
+ .attrs = &ads1015_attribute_group,
+};
+
static int ads1015_client_get_channels_config(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
@@ -937,6 +973,12 @@ static int ads1015_probe(struct i2c_client *client,
indio_dev->info = &ads1115_info;
data->data_rate = (unsigned int *) &ads1115_data_rate;
break;
+ case TLA2024:
+ indio_dev->channels = tla2024_channels;
+ indio_dev->num_channels = ARRAY_SIZE(tla2024_channels);
+ indio_dev->info = &tla2024_info;
+ data->data_rate = (unsigned int *) &ads1015_data_rate;
+ break;
default:
dev_err(&client->dev, "Unknown chip %d\n", chip);
return -EINVAL;
@@ -957,7 +999,9 @@ static int ads1015_probe(struct i2c_client *client,
/* we need to keep this ABI the same as used by hwmon ADS1015 driver */
ads1015_get_channels_config(client);
- data->regmap = devm_regmap_init_i2c(client, &ads1015_regmap_config);
+ data->regmap = devm_regmap_init_i2c(client, (chip == TLA2024) ?
+ &tla2024_regmap_config :
+ &ads1015_regmap_config);
if (IS_ERR(data->regmap)) {
dev_err(&client->dev, "Failed to allocate register map\n");
return PTR_ERR(data->regmap);
@@ -971,7 +1015,7 @@ static int ads1015_probe(struct i2c_client *client,
return ret;
}
- if (client->irq) {
+ if (client->irq && chip != TLA2024) {
unsigned long irq_trig =
irqd_get_trigger_type(irq_get_irq_data(client->irq));
unsigned int cfg_comp_mask = ADS1015_CFG_COMP_QUE_MASK |
@@ -1073,6 +1117,7 @@ static const struct dev_pm_ops ads1015_pm_ops = {
static const struct i2c_device_id ads1015_id[] = {
{"ads1015", ADS1015},
{"ads1115", ADS1115},
+ {"tla2024", TLA2024},
{}
};
MODULE_DEVICE_TABLE(i2c, ads1015_id);
@@ -1086,6 +1131,10 @@ static const struct of_device_id ads1015_of_match[] = {
.compatible = "ti,ads1115",
.data = (void *)ADS1115
},
+ {
+ .compatible = "ti,tla2024",
+ .data = (void *)TLA2024
+ },
{}
};
MODULE_DEVICE_TABLE(of, ads1015_of_match);
Add support for TI TLA2024 ADC. This chip is compatible with ADS1015 except it has no comparator in it, hence the comparator configuration bits are missing in Configuration Register and the Hi_Thresh/Lo_Thresh registers are missing as well and so is event support. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andy Shevchenko <andy@kernel.org> Cc: Daniel Baluta <daniel.baluta@nxp.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> --- V2: No change V3: Use ADS1015 attr group, that's the correct one for this part V4: No change V5: No change --- drivers/iio/adc/ti-ads1015.c | 53 ++++++++++++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 2 deletions(-)