[28/34] iio: adc: at91-sama5d2_adc: convert to device properties

Commit Message

Nuno Sa June 10, 2022, 8:45 a.m. UTC

Make the conversion to firmware agnostic device properties. As part of
the conversion the IIO inkern interface 'of_xlate()' is also converted to
'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
dependencies from IIO.

Signed-off-by: Nuno Sá <[e-mail]>
---
 drivers/iio/adc/at91-sama5d2_adc.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

Patch

diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index b764823ce57e..f5a1df19e5b6 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -16,8 +16,9 @@ 
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/sched.h>
 #include <linux/wait.h>
 #include <linux/iio/iio.h>
@@ -650,8 +651,8 @@  at91_adc_chan_get(struct iio_dev *indio_dev, int chan)
 	return indio_dev->channels + index;
 }
 
-static inline int at91_adc_of_xlate(struct iio_dev *indio_dev,
-				    const struct of_phandle_args *iiospec)
+static inline int at91_adc_fwnode_xlate(struct iio_dev *indio_dev,
+					const struct fwnode_reference_args *iiospec)
 {
 	return at91_adc_chan_xlate(indio_dev, iiospec->args[0]);
 }
@@ -1876,7 +1877,7 @@  static const struct iio_info at91_adc_info = {
 	.read_raw = &at91_adc_read_raw,
 	.write_raw = &at91_adc_write_raw,
 	.update_scan_mode = &at91_adc_update_scan_mode,
-	.of_xlate = &at91_adc_of_xlate,
+	.fwnode_xlate = &at91_adc_fwnode_xlate,
 	.hwfifo_set_watermark = &at91_adc_set_watermark,
 };
 
@@ -1920,6 +1921,7 @@  static int at91_adc_buffer_and_trigger_init(struct device *dev,
 
 static int at91_adc_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct iio_dev *indio_dev;
 	struct at91_adc_state *st;
 	struct resource	*res;
@@ -1933,7 +1935,7 @@  static int at91_adc_probe(struct platform_device *pdev)
 	st = iio_priv(indio_dev);
 	st->indio_dev = indio_dev;
 
-	st->soc_info.platform = of_device_get_match_data(&pdev->dev);
+	st->soc_info.platform = device_get_match_data(dev);
 
 	indio_dev->name = dev_name(&pdev->dev);
 	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
@@ -1950,34 +1952,32 @@  static int at91_adc_probe(struct platform_device *pdev)
 
 	st->oversampling_ratio = AT91_OSR_1SAMPLES;
 
-	ret = of_property_read_u32(pdev->dev.of_node,
-				   "atmel,min-sample-rate-hz",
-				   &st->soc_info.min_sample_rate);
+	ret = device_property_read_u32(dev, "atmel,min-sample-rate-hz",
+				       &st->soc_info.min_sample_rate);
 	if (ret) {
 		dev_err(&pdev->dev,
 			"invalid or missing value for atmel,min-sample-rate-hz\n");
 		return ret;
 	}
 
-	ret = of_property_read_u32(pdev->dev.of_node,
-				   "atmel,max-sample-rate-hz",
-				   &st->soc_info.max_sample_rate);
+	ret = device_property_read_u32(dev, "atmel,max-sample-rate-hz",
+				       &st->soc_info.max_sample_rate);
 	if (ret) {
 		dev_err(&pdev->dev,
 			"invalid or missing value for atmel,max-sample-rate-hz\n");
 		return ret;
 	}
 
-	ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms",
-				   &st->soc_info.startup_time);
+	ret = device_property_read_u32(dev, "atmel,startup-time-ms",
+				       &st->soc_info.startup_time);
 	if (ret) {
 		dev_err(&pdev->dev,
 			"invalid or missing value for atmel,startup-time-ms\n");
 		return ret;
 	}
 
-	ret = of_property_read_u32(pdev->dev.of_node,
-				   "atmel,trigger-edge-type", &edge_type);
+	ret = device_property_read_u32(dev, "atmel,trigger-edge-type",
+				       &edge_type);
 	if (ret) {
 		dev_dbg(&pdev->dev,
 			"atmel,trigger-edge-type not specified, only software trigger available\n");