| Message ID | 20230123194738.25eb2a1a@jic23-huawei (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | [PULL] IIO fixes for 6.2 - set 1 | expand |
On Mon, Jan 23, 2023 at 07:47:38PM +0000, Jonathan Cameron wrote: > The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2: > > Linux 6.2-rc1 (2022-12-25 13:41:39 -0800) > > are available in the Git repository at: > > https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-6.2a Sorry for the delay, now pulled and pushed out. greg k-h
The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2: Linux 6.2-rc1 (2022-12-25 13:41:39 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-6.2a for you to fetch changes up to 2acd031347f645871959a799238a7caf6803aa18: iio: imu: fxos8700: fix MAGN sensor scale and unit (2023-01-21 18:15:19 +0000) ---------------------------------------------------------------- 1st set of IIO fixes for the 6.2 cycle. The usual mixed bag - with a bunch of issues found by Carlos Song in the fxos8700 IMU driver dominating. hid-accel,gyro - Fix wrong returned value when read succeeds. marvell,berlin-adc - Missing of_node_put() in an error path. nxp,fxos8700 (freescale) - Wrong channel type match. - Swapped channel read back. - Incomplete channel read back (not enough bytes). - Missing shift of acceleration data. - Range selection didn't work (datasheet bug) - Wrong ODR mode read back due to wrong field offset. - Drop unused, but wrong define. - Fix issue with magnetometer scale an units. nxp,imx8qxp - Fix an irq flood due to not reading data early enough. st,lsm6dsx - Add CONFIG_IIO_TRIGGERED_BUFFER select. st,stm32-adc - Fix missing MODULE_DEVICE_TABLE() needed for module aliases. ti,twl6030 - Fix missing enable of some channels. - Fix a typo in previous patch that meant one channel still wasn't enabled. xilinx,xadc - Carrying on incorrectly after allocation error. ---------------------------------------------------------------- Andreas Kemnade (2): iio:adc:twl6030: Enable measurements of VUSB, VBAT and others iio:adc:twl6030: Enable measurement of VAC Carlos Song (9): iio: imu: fxos8700: fix map label of channel type to MAGN sensor iio: imu: fxos8700: fix swapped ACCEL and MAGN channels readback iio: imu: fxos8700: fix incomplete ACCEL and MAGN channels readback iio: imu: fxos8700: fix IMU data bits returned to user space iio: imu: fxos8700: fix ACCEL measurement range selection iio: imu: fxos8700: fix incorrect ODR mode readback iio: imu: fxos8700: fix failed initialization ODR mode assignment iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN iio: imu: fxos8700: fix MAGN sensor scale and unit Dmitry Perchanov (2): iio: hid: fix the retval in accel_3d_capture_sample iio: hid: fix the retval in gyro_3d_capture_sample Frank Li (1): iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw() Kai-Heng Feng (1): iio: light: cm32181: Fix PM support on system with 2 I2C resources Marco Pagani (1): iio: adc: xilinx-ams: fix devm_krealloc() return value check Olivier Moysan (1): iio: adc: stm32-dfsdm: fill module aliases Vladimir Oltean (1): iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m Xiongfeng Wang (1): iio: adc: berlin2-adc: Add missing of_node_put() in error path drivers/iio/accel/hid-sensor-accel-3d.c | 1 + drivers/iio/adc/berlin2-adc.c | 4 +- drivers/iio/adc/imx8qxp-adc.c | 11 +++- drivers/iio/adc/stm32-dfsdm-adc.c | 1 + drivers/iio/adc/twl6030-gpadc.c | 32 +++++++++ drivers/iio/adc/xilinx-ams.c | 2 +- drivers/iio/gyro/hid-sensor-gyro-3d.c | 1 + drivers/iio/imu/fxos8700_core.c | 111 +++++++++++++++++++++++++------- drivers/iio/imu/st_lsm6dsx/Kconfig | 1 + drivers/iio/light/cm32181.c | 9 +-- 10 files changed, 143 insertions(+), 30 deletions(-)