| Message ID | 20230827132525.951475-17-dmitry.baryshkov@linaro.org (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | ARM: dts: qcom: cleanup PMIC usage | expand |
On 27.08.2023 15:25, Dmitry Baryshkov wrote: > The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is > not a property of the SoC, it is a property of the particular board > (even if it is standard and unified between all devices). Move these > interrupt specifications to the board files. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts index 4641b4f2195d..43149c90c4fc 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts @@ -88,6 +88,10 @@ clk-pins { }; }; +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8921_keypad { linux,keymap = < MATRIX_KEY(0, 0, KEY_VOLUMEUP) diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts index 13e85c287498..9e203164beb6 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts @@ -84,6 +84,10 @@ clk-pins { }; }; +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + &rpm { regulators { compatible = "qcom,rpm-pm8921-regulators"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index ea2d961b266b..f1267c83d67a 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -266,8 +266,6 @@ ssbi@500000 { pm8921: pmic { compatible = "qcom,pm8921"; - interrupt-parent = <&msmgpio>; - interrupts = <104 IRQ_TYPE_LEVEL_LOW>; #interrupt-cells = <2>; interrupt-controller; #address-cells = <1>;
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts | 4 ++++ arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts | 4 ++++ arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 2 -- 3 files changed, 8 insertions(+), 2 deletions(-)