@@ -1013,28 +1013,25 @@ static int at91_adc_probe(struct platform_device *pdev)
st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers");
- if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) {
- dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n");
- return -EINVAL;
- }
+ if (of_property_read_u32(node, "atmel,adc-channels-used", &prop))
+ return dev_err_probe(&idev->dev, -EINVAL,
+ "Missing adc-channels-used property in the DT.\n");
st->channels_mask = prop;
st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode");
- if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
- dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n");
- return -EINVAL;
- }
+ if (of_property_read_u32(node, "atmel,adc-startup-time", &prop))
+ return dev_err_probe(&idev->dev, -EINVAL,
+ "Missing adc-startup-time property in the DT.\n");
st->startup_time = prop;
prop = 0;
of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop);
st->sample_hold_time = prop;
- if (of_property_read_u32(node, "atmel,adc-vref", &prop)) {
- dev_err(&idev->dev, "Missing adc-vref property in the DT.\n");
- return -EINVAL;
- }
+ if (of_property_read_u32(node, "atmel,adc-vref", &prop))
+ return dev_err_probe(&idev->dev, -EINVAL,
+ "Missing adc-vref property in the DT.\n");
st->vref_mv = prop;
st->res = st->caps->high_res_bits;
@@ -1069,7 +1066,6 @@ static int at91_adc_probe(struct platform_device *pdev)
if (IS_ERR(st->reg_base))
return PTR_ERR(st->reg_base);
-
/*
* Disable all IRQs before setting up the handler
*/
@@ -1084,24 +1080,19 @@ static int at91_adc_probe(struct platform_device *pdev)
ret = devm_request_irq(&pdev->dev, st->irq,
at91_adc_rl_interrupt, 0,
pdev->dev.driver->name, idev);
- if (ret) {
- dev_err(&pdev->dev, "Failed to allocate IRQ.\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "Failed to allocate IRQ.\n");
st->clk = devm_clk_get_enabled(&pdev->dev, "adc_clk");
- if (IS_ERR(st->clk)) {
- dev_err(&pdev->dev,
- "Could not prepare or enable the clock.\n");
- return PTR_ERR(st->clk);
- }
+ if (IS_ERR(st->clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(st->clk),
+ "Could not prepare or enable the clock.\n");
st->adc_clk = devm_clk_get_enabled(&pdev->dev, "adc_op_clk");
- if (IS_ERR(st->adc_clk)) {
- dev_err(&pdev->dev,
- "Could not prepare or enable the ADC clock.\n");
- return PTR_ERR(st->adc_clk);
- }
+ if (IS_ERR(st->adc_clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(st->adc_clk),
+ "Could not prepare or enable the ADC clock.\n");
/*
* Prescaler rate computation using the formula from the Atmel's
@@ -1117,10 +1108,9 @@ static int at91_adc_probe(struct platform_device *pdev)
prsc = (mstrclk / (2 * adc_clk)) - 1;
- if (!st->startup_time) {
- dev_err(&pdev->dev, "No startup time available.\n");
- return -EINVAL;
- }
+ if (!st->startup_time)
+ return dev_err_probe(&pdev->dev, -EINVAL,
+ "No startup time available.\n");
ticks = (*st->caps->calc_startup_ticks)(st->startup_time, adc_clk_khz);
/*
@@ -1145,10 +1135,9 @@ static int at91_adc_probe(struct platform_device *pdev)
/* Setup the ADC channels available on the board */
ret = at91_adc_channel_init(idev);
- if (ret < 0) {
- dev_err(&pdev->dev, "Couldn't initialize the channels.\n");
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret,
+ "Couldn't initialize the channels.\n");
init_waitqueue_head(&st->wq_data_avail);
mutex_init(&st->lock);
@@ -1160,10 +1149,9 @@ static int at91_adc_probe(struct platform_device *pdev)
*/
if (!st->touchscreen_type) {
ret = at91_adc_buffer_init(idev);
- if (ret < 0) {
- dev_err(&pdev->dev, "Couldn't initialize the buffer.\n");
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret,
+ "Couldn't initialize the buffer.\n");
ret = at91_adc_trigger_init(idev);
if (ret < 0) {
Use the dev_err_probe() helper to simplify error handling during probe. This also handle scenario, when EDEFER is returned and useless error is printed. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- v3: - Not going any longer than 80 chars than is necessary. v2: - Use the dev_err_probe() helper. --- drivers/iio/adc/at91_adc.c | 66 ++++++++++++++++---------------------- 1 file changed, 27 insertions(+), 39 deletions(-)