From patchwork Thu Sep 21 14:19:40 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: David Lechner X-Patchwork-Id: 13394478 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 263C2E7D0A6 for ; Thu, 21 Sep 2023 20:12:14 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230450AbjIUUMR (ORCPT ); Thu, 21 Sep 2023 16:12:17 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51946 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230462AbjIUUMF (ORCPT ); Thu, 21 Sep 2023 16:12:05 -0400 Received: from mail-ej1-x632.google.com (mail-ej1-x632.google.com [IPv6:2a00:1450:4864:20::632]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 617DE51F72 for ; Thu, 21 Sep 2023 10:17:05 -0700 (PDT) Received: by mail-ej1-x632.google.com with SMTP id a640c23a62f3a-9ae22bf33a0so525997766b.0 for ; Thu, 21 Sep 2023 10:17:05 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20230601.gappssmtp.com; s=20230601; t=1695316623; x=1695921423; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=xoiF1sc5Yv1hjuRdgeGOkvi9X2NDURf5lh9dRaGmJUM=; b=uBzdZHogL6jyN5hfcii1FzufCCmp8yTnWbEsR0PU1NoPgG7WZLNEdXRUvYeH3ew9/S vrDDUPtjKKNmQ05xRmxuEGrtlK4GTLtf3YFdcEOn+bwtzE8Q8/Hs8agxuYvLmRsh2zAg Hk22vOHhmq7yzIW1tEXoxMxt2sYLVrtCqTm65CUWIIvGQkA92pBkXHp1oAvGZ+9f0h4X 81qr8XswqtSM40gYceL8qiqcrEKo5zsvvBIBQBblBMBVocmepbb0FNwp9Z9Ls8445Qg7 HF/TXAQEnuuhxBij4UYvXG7gV8X8sFsZ6O0UsLaKryqaYD59kiJbQpXAX/gUUQQyHg2J 6wAA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1695316623; x=1695921423; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=xoiF1sc5Yv1hjuRdgeGOkvi9X2NDURf5lh9dRaGmJUM=; b=rKhotXXPp597PfSaolADPyr094/+3uzDAmQPGa7ExdU2LAMlzy2RRXo8weZniR9itM y8Dteoyug7ZFXntArY8UfbbgbWig2CLXyPr94K7Inaj7gQP3x0zmeiW6dmf9Uq6rG0RS qFdEIyprOovH+NXfKMC1gYoEZcjBCZcNq4b1+4jkUp3E9FqgzYvSnd8kLsDAw0LDLXF2 TeVR7jjbf8LrbDoso4LSN+gSEpYrYgaSmn+2t6DVfyVxo4KVwv6jE307klM+qLZvYyRB SCAX1O5RsvUUsaEFg57Mk4IN8AvfHAqw1mK+o6AwAJyFPIAxx0hgN4gbjptJuCCq9MSs APSw== X-Gm-Message-State: AOJu0YyfNog1uHhxez9jBGxtF2aBFpmSnSQAJAlQQUVn6rWQ43mIqdK7 627diF5coYKtA4VODPXyji4NbD5RE3DwuYW+OvNd4pEq X-Google-Smtp-Source: AGHT+IFLAailNSfpLWCmoZinfeHn+u6645WDTA+4EEZgkEmo5Zeo7s9f1tFWyiN0QMRZgSvQMKO0kw== X-Received: by 2002:adf:d0cc:0:b0:31f:ebb5:cd51 with SMTP id z12-20020adfd0cc000000b0031febb5cd51mr4695038wrh.33.1695306162905; Thu, 21 Sep 2023 07:22:42 -0700 (PDT) Received: from localhost.localdomain (abordeaux-655-1-129-86.w90-5.abo.wanadoo.fr. [90.5.10.86]) by smtp.gmail.com with ESMTPSA id n11-20020a5d4c4b000000b0031fbbe347ebsm1901426wrt.22.2023.09.21.07.22.42 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 21 Sep 2023 07:22:42 -0700 (PDT) From: David Lechner To: linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-staging@lists.linux.dev Cc: linux-kernel@vger.kernel.org, Jonathan Cameron , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Michael Hennerich , =?utf-8?q?Nuno_S=C3=A1?= , Axel Haslam , Philip Molloy , David Lechner Subject: [v2 12/19] staging: iio: resolver: ad2s1210: rework gpios Date: Thu, 21 Sep 2023 09:19:40 -0500 Message-Id: <20230921141947.57784-15-dlechner@baylibre.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230921141947.57784-1-dlechner@baylibre.com> References: <20230921141947.57784-1-dlechner@baylibre.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org - Remove "adi," prefix from gpio names. - Sample gpio is now expected to be active low. - Convert A0 and A1 gpios to "mode-gpios" gpio array. - Convert RES0 and RES1 gpios to "resolution-gpios" gpio array. - Remove extraneous lookup tables. - Remove unused mode field from state struct. - Swap argument order of ad2s1210_set_mode() while we are touching this. Signed-off-by: David Lechner --- drivers/staging/iio/resolver/ad2s1210.c | 162 ++++++++++++------------ 1 file changed, 84 insertions(+), 78 deletions(-) diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c index 223cc4702188..7a1069d948eb 100644 --- a/drivers/staging/iio/resolver/ad2s1210.c +++ b/drivers/staging/iio/resolver/ad2s1210.c @@ -60,39 +60,21 @@ #define AD2S1210_DEF_EXCIT 10000 enum ad2s1210_mode { - MOD_POS = 0, - MOD_VEL, - MOD_CONFIG, - MOD_RESERVED, + MOD_POS = 0b00, + MOD_VEL = 0b01, + MOD_RESERVED = 0b10, + MOD_CONFIG = 0b11, }; -enum ad2s1210_gpios { - AD2S1210_SAMPLE, - AD2S1210_A0, - AD2S1210_A1, - AD2S1210_RES0, - AD2S1210_RES1, -}; - -struct ad2s1210_gpio { - const char *name; - unsigned long flags; -}; - -static const struct ad2s1210_gpio gpios[] = { - [AD2S1210_SAMPLE] = { .name = "adi,sample", .flags = GPIOD_OUT_LOW }, - [AD2S1210_A0] = { .name = "adi,a0", .flags = GPIOD_OUT_LOW }, - [AD2S1210_A1] = { .name = "adi,a1", .flags = GPIOD_OUT_LOW }, - [AD2S1210_RES0] = { .name = "adi,res0", .flags = GPIOD_OUT_LOW }, - [AD2S1210_RES1] = { .name = "adi,res1", .flags = GPIOD_OUT_LOW }, -}; - -static const unsigned int ad2s1210_resolution_value[] = { 10, 12, 14, 16 }; - struct ad2s1210_state { struct mutex lock; struct spi_device *sdev; - struct gpio_desc *gpios[5]; + /** GPIO pin connected to SAMPLE line. */ + struct gpio_desc *sample_gpio; + /** GPIO pins connected to A0 and A1 lines. */ + struct gpio_descs *mode_gpios; + /** GPIO pins connected to RES0 and RES1 lines. */ + struct gpio_descs *resolution_gpios; /** Used to access config registers. */ struct regmap *regmap; /** The external oscillator frequency in Hz. */ @@ -100,23 +82,19 @@ struct ad2s1210_state { unsigned int fexcit; bool hysteresis; u8 resolution; - enum ad2s1210_mode mode; u8 rx[2] __aligned(IIO_DMA_MINALIGN); u8 tx[2]; }; -static const int ad2s1210_mode_vals[4][2] = { - [MOD_POS] = { 0, 0 }, - [MOD_VEL] = { 0, 1 }, - [MOD_CONFIG] = { 1, 1 }, -}; - -static inline void ad2s1210_set_mode(enum ad2s1210_mode mode, - struct ad2s1210_state *st) +static int ad2s1210_set_mode(struct ad2s1210_state *st, enum ad2s1210_mode mode) { - gpiod_set_value(st->gpios[AD2S1210_A0], ad2s1210_mode_vals[mode][0]); - gpiod_set_value(st->gpios[AD2S1210_A1], ad2s1210_mode_vals[mode][1]); - st->mode = mode; + struct gpio_descs *gpios = st->mode_gpios; + DECLARE_BITMAP(bitmap, 2); + + bitmap[0] = mode; + + return gpiod_set_array_value(gpios->ndescs, gpios->desc, gpios->info, + bitmap); } /* @@ -141,6 +119,7 @@ static int ad2s1210_regmap_reg_write(void *context, unsigned int reg, .tx_buf = &st->tx[1], }, }; + int ret; /* values can only be 7 bits, the MSB indicates an address */ if (val & ~0x7F) @@ -149,7 +128,9 @@ static int ad2s1210_regmap_reg_write(void *context, unsigned int reg, st->tx[0] = reg; st->tx[1] = val; - ad2s1210_set_mode(MOD_CONFIG, st); + ret = ad2s1210_set_mode(st, MOD_CONFIG); + if (ret < 0) + return ret; return spi_sync_transfer(st->sdev, xfers, ARRAY_SIZE(xfers)); } @@ -178,7 +159,10 @@ static int ad2s1210_regmap_reg_read(void *context, unsigned int reg, }; int ret; - ad2s1210_set_mode(MOD_CONFIG, st); + ret = ad2s1210_set_mode(st, MOD_CONFIG); + if (ret < 0) + return ret; + st->tx[0] = reg; /* Must be valid register address here otherwise this could write data. * It doesn't matter which one. @@ -215,16 +199,16 @@ int ad2s1210_update_frequency_control_word(struct ad2s1210_state *st) return regmap_write(st->regmap, AD2S1210_REG_EXCIT_FREQ, fcw); } -static const int ad2s1210_res_pins[4][2] = { - { 0, 0 }, {0, 1}, {1, 0}, {1, 1} -}; - -static inline void ad2s1210_set_resolution_pin(struct ad2s1210_state *st) +static int ad2s1210_set_resolution_gpios(struct ad2s1210_state *st, + u8 resolution) { - gpiod_set_value(st->gpios[AD2S1210_RES0], - ad2s1210_res_pins[(st->resolution - 10) / 2][0]); - gpiod_set_value(st->gpios[AD2S1210_RES1], - ad2s1210_res_pins[(st->resolution - 10) / 2][1]); + struct gpio_descs *gpios = st->resolution_gpios; + DECLARE_BITMAP(bitmap, 2); + + bitmap[0] = (resolution - 10) >> 1; + + return gpiod_set_array_value(gpios->ndescs, gpios->desc, gpios->info, + bitmap); } static inline int ad2s1210_soft_reset(struct ad2s1210_state *st) @@ -301,10 +285,13 @@ static ssize_t ad2s1210_store_resolution(struct device *dev, if (ret < 0) goto error_ret; - st->resolution = - ad2s1210_resolution_value[data & AD2S1210_SET_RES]; - ad2s1210_set_resolution_pin(st); + ret = ad2s1210_set_resolution_gpios(st, udata); + if (ret < 0) + goto error_ret; + + st->resolution = udata; ret = len; + error_ret: mutex_unlock(&st->lock); return ret; @@ -335,15 +322,19 @@ static ssize_t ad2s1210_clear_fault(struct device *dev, int ret; mutex_lock(&st->lock); - gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 0); + + gpiod_set_value(st->sample_gpio, 1); /* delay (2 * tck + 20) nano seconds */ udelay(1); - gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 1); + gpiod_set_value(st->sample_gpio, 0); + ret = regmap_read(st->regmap, AD2S1210_REG_FAULT, &value); if (ret < 0) goto error_ret; - gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 0); - gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 1); + + gpiod_set_value(st->sample_gpio, 1); + gpiod_set_value(st->sample_gpio, 0); + error_ret: mutex_unlock(&st->lock); @@ -404,16 +395,16 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: mutex_lock(&st->lock); - gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 0); + gpiod_set_value(st->sample_gpio, 1); /* delay (6 * tck + 20) nano seconds */ udelay(1); switch (chan->type) { case IIO_ANGL: - ad2s1210_set_mode(MOD_POS, st); + ret = ad2s1210_set_mode(st, MOD_POS); break; case IIO_ANGL_VEL: - ad2s1210_set_mode(MOD_VEL, st); + ret = ad2s1210_set_mode(st, MOD_VEL); break; default: ret = -EINVAL; @@ -440,7 +431,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev, } error_info_raw: - gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 1); + gpiod_set_value(st->sample_gpio, 0); /* delay (2 * tck + 20) nano seconds */ udelay(1); mutex_unlock(&st->lock); @@ -542,7 +533,9 @@ static int ad2s1210_initial(struct ad2s1210_state *st) int ret; mutex_lock(&st->lock); - ad2s1210_set_resolution_pin(st); + ret = ad2s1210_set_resolution_gpios(st, st->resolution); + if (ret < 0) + return ret; data = AD2S1210_DEF_CONTROL & ~AD2S1210_SET_RES; data |= (st->resolution - 10) >> 1; @@ -604,20 +597,34 @@ static int ad2s1210_setup_clocks(struct ad2s1210_state *st) static int ad2s1210_setup_gpios(struct ad2s1210_state *st) { - struct spi_device *spi = st->sdev; - int i, ret; - - for (i = 0; i < ARRAY_SIZE(gpios); i++) { - st->gpios[i] = devm_gpiod_get(&spi->dev, gpios[i].name, - gpios[i].flags); - if (IS_ERR(st->gpios[i])) { - ret = PTR_ERR(st->gpios[i]); - dev_err(&spi->dev, - "ad2s1210: failed to request %s GPIO: %d\n", - gpios[i].name, ret); - return ret; - } - } + struct device *dev = &st->sdev->dev; + + /* should not be sampling on startup */ + st->sample_gpio = devm_gpiod_get(dev, "sample", GPIOD_OUT_LOW); + if (IS_ERR(st->sample_gpio)) + return dev_err_probe(dev, PTR_ERR(st->sample_gpio), + "failed to request sample GPIO\n"); + + /* both pins high means that we start in config mode */ + st->mode_gpios = devm_gpiod_get_array(dev, "mode", GPIOD_OUT_HIGH); + if (IS_ERR(st->mode_gpios)) + return dev_err_probe(dev, PTR_ERR(st->mode_gpios), + "failed to request mode GPIOs\n"); + + if (st->mode_gpios->ndescs != 2) + return dev_err_probe(dev, -EINVAL, + "requires exactly 2 mode-gpios\n"); + + /* both pins high means that we start with 16-bit resolution */ + st->resolution_gpios = devm_gpiod_get_array(dev, "resolution", + GPIOD_OUT_HIGH); + if (IS_ERR(st->resolution_gpios)) + return dev_err_probe(dev, PTR_ERR(st->resolution_gpios), + "failed to request resolution GPIOs\n"); + + if (st->resolution_gpios->ndescs != 2) + return dev_err_probe(dev, -EINVAL, + "requires exactly 2 resolution-gpios\n"); return 0; } @@ -683,7 +690,6 @@ static int ad2s1210_probe(struct spi_device *spi) mutex_init(&st->lock); st->sdev = spi; st->hysteresis = true; - st->mode = MOD_CONFIG; st->resolution = 12; st->fexcit = AD2S1210_DEF_EXCIT;