| Message ID | 20231017202438.2ace1422@jic23-huawei (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | [PULL] IIO: 1st set of new device support, features and cleanup for 6.7 | expand |
On Tue, Oct 17, 2023 at 08:24:38PM +0100, Jonathan Cameron wrote: > The following changes since commit 0bb80ecc33a8fb5a682236443c1e740d5c917d1d: > > Linux 6.6-rc1 (2023-09-10 16:28:41 -0700) > > are available in the Git repository at: > > https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.7a Pulled and pushed out, thanks. greg k-h
The following changes since commit 0bb80ecc33a8fb5a682236443c1e740d5c917d1d: Linux 6.6-rc1 (2023-09-10 16:28:41 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.7a for you to fetch changes up to 89a1d2f064d2ae77a9cd6a8c7ac42b3c1647efa5: iio: Use device_get_match_data() (2023-10-14 17:18:36 +0100) ---------------------------------------------------------------- IIO: 1st set of new device support, features and cleanup for 6.7 Particularly great to see a resolver driver move out of staging via a massive set of changes. Only took 13 years :) One small patch added then reverted due to a report of test breakage (ashai-kasei,ak8975: Drop deprecated enums.) An immutable branch was used for some hid-senors changes in case there was a need to take them into the HID tree as well. New device support ----------------- adi,hmc425a - Add support for HMC540SLP3E broadband 4-bit digital attenuator. kionix,kx022a - Add support for the kx132-1211 accelerometer. Require significant driver rework to enable this including add a chip type specific structure to deal with the chip differences. - Add support for the kx132acr-lbz accelerometer (subset of the kx022a feature set). lltc,ltc2309 - New driver for this 8 channel ADC. microchip,mcp3911 - Add support for rest of mcp391x family of ADCs (there are various differences beyond simple channel count variation. Series includes some general driver cleanup. microchip,mcp3564 - New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564 and their R variants of 16/24bit ADCs. A few minor fixed followed. rohm,bu1390 - New driver for this pressure sensor. Staging graduation ------------------ adi,ad1210 (after 13 or so years :) - More or less a complete (step-wise) rewrite of this resolver driver to bring it up to date with modern IIO standards. The fault signal handling mapping to event channels was particularly complex and significant part of the changes. Features -------- iio-core - Add chromacity and color temperature channel types. adi,ad7192 - Oversampling ratio control (called fast settling in datasheet). adi,adis16475 - Add core support and then driver support for delta angle and delta velocity channels. These are intended for summation to establish angle and velocity changes over larger timescales. Fix was needed for alignment after the temperature channel. Further fix reduced set of devices for which the buffer support was applicable as seems burst reads don't cover these on all devices. hid-sensors-als - Chromacity and color temperatures support including in amd sfh. stx104 - Add support for counter subsystem to this multipurpose device. ti,twl6030 - Add missing device tree binding description. Clean up and minor fixes. ------------------------ treewide - Drop some unused declarations across IIO. - Make more use of device_get_match_data() instead of OF specific approaches. Similar cleanup to sets of drivers. - Stop platform remove callbacks returning anything by using the temporary remove_new() callback. - Use i2c_get_match_data() to cope nicely with all types of ID table entry. - Use device_get_match_data() for various platform device to cope with more types of firmware. - Convert from enum to pointer in ID tables allowing use of i2c_get_match_data(). - Fix sorting on some ID tables. - Include specific string helper headers rather than simply string_helpers.h docs - Better description of the ordering requirements etc for available_scan_masks. tools - Handle alignment of mixed sizes where the last element isn't the biggest correctly. Seems that doesn't happen often! adi,ad2s1210 - Lots of work from David Lechner on this driver including a few fixes that are going with the rework to avoid slowing that down. adi,ad4310 - Replace deprecated devm_clk_register() adi,ad74413r - Bring the channel function setting inline with the datasheet. adi,ad7192 - Change to FIELD_PREP(), FIELD_GET(). - Calculate f_order from the sinc filter and chop filter states. - Move more per chip config into data in struct ad7192_chip_info - Cleanup unused parameter in channel macros. adi,adf4350 - Make use of devm_* to simplify error handling for many of the setup calls in probe() / tear down in remove() and error paths. Some more work to be done on this one. - Use dev_err_probe() for errors in probe() callback. adi,adf4413 - Typo in function name prefix. adi,adxl345 - Add channel scale to the chip type specific structure and drop using a type field previously used for indirection. asahi,ak8985 - Fix a mismatch introduced when switching from enum->pointers in the match tables. amlogic,meson - Expand error logging during probe. invensense,mpu6050 - Support level-shifter control. Whilst no one is sure exactly what this is doing it is needed for some old boards. - Document mount-matrix dt-binding. mediatek,mt6577 - Use devm_clk_get_enabled() to replace open coded version and move everything over to being device managed. Drop now empty remove() callback. Fix follows to put the drvdata back. - Use dev_err_probe() for error reporting in probe() callback. memsic,mxc4005 - Add of_match_table. microchip,mcp4725 - Move various chip specific data from being looked up by chip ID to data in the chip type specific structure. silicon-labs,si7005 - Add of_match_table and entry in trivial-devices.yaml st,lsm6dsx - Add missing mount-matrix dt binding documentation. st,spear - Use devm_clk_get_enabled() and some other devm calls to move everything over to being device managed. Drop now empty remove() callback. - Use dev_err_probe() to better handled deferred probing and tidy up error reporting in probe() callback. st,stm32-adc - Add a bit of additional checking in probe() to protect against a NULL pointer (no known path to trigger it today). - Replace deprecated strncpy() ti,ads1015 - Allow for edge triggers. - Document interrupt in dt-bindings. ---------------------------------------------------------------- Alisa-Dariana Roman (5): iio: adc: ad7192: Use bitfield access macros iio: adc: ad7192: Improve f_order computation iio: adc: ad7192: Organize chip info iio: adc: ad7192: Remove unused member iio: adc: ad7192: Add fast settling support Ana-Maria Cusco (1): dt-bindings: iio: hmc425a: add entry for HMC540S Andreas Kemnade (3): dt-bindings: iio: adc: Add TI TWL603X GPADC dt-bindings: iio: imu: mpu6050: Add level shifter iio: imu: mpu6050: add level shifter flag André Apitzsch (1): iio: magnetometer: ak8975: Fix 'Unexpected device' error Andy Shen Shen (1): iio: adc: palmas_gpadc: Drop duplicated the in comment. Andy Shevchenko (3): iio: accel: kionix-kx022a: Use correct header(s) instead of string_helpers.h iio: accel: msa311: Use correct header(s) instead of string_helpers.h iio: dac: stm32-dac: Use correct header(s) instead of string_helpers.h AngeloGioacchino Del Regno (1): iio: adc: mt6577_auxadc: Fix kernel panic on suspend Antoniu Miclaus (3): iio: addac: ad74413r: fix function prefix typo iio: addac: ad74413r: update channel function set MAINTAINERS: fix Analog Devices website link Basavaraj Natikar (9): iio: hid-sensor-als: Use channel index to support more hub attributes iio: Add channel type light color temperature iio: hid-sensor-als: Add light color temperature support HID: amd_sfh: Add support for light color temperature HID: amd_sfh: Add support for SFH1.1 light color temperature iio: Add channel type for chromaticity iio: hid-sensor-als: Add light chromaticity support HID: amd_sfh: Add light chromaticity support HID: amd_sfh: Add light chromaticity for SFH1.1 Biju Das (30): iio: accel: mma8452: Convert enum->pointer for data in the ID table iio: accel: mma8452: Sort match tables iio: chemical: vz89x: Convert enum->pointer for data in the match tables iio: chemical: atlas-sensor: Convert enum->pointer for data in the match tables iio: chemical: atlas-ezo-sensor: Simplify probe() iio: proximity: sx9310: Convert enum->pointer for match data table iio: dac: ti-dac5571: Use i2c_get_match_data() iio: dac: ti-dac5571: Sort match tables iio: magnetometer: yamaha-yas530: Use i2c_get_match_data() iio: adc: max1363: Use i2c_get_match_data() iio: accel: bma180: Convert enum->pointer for data in the match table iio: mlx90614: Use i2c_get_match_data() iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables iio: magnetometer: ak8975: Sort ID and ACPI tables dt-bindings: iio: magnetometer: asahi-kasei,ak8975: Drop deprecated enums iio: chemical: sgp30: Convert enum->pointer for data in the match tables iio: potentiometer: ds1803: Convert enum->pointer for data in the ID table iio: potentiometer: ad5110: Use i2c_get_match_data() iio: light: opt4001: Use i2c_get_match_data() iio: temperature: tmp117: Convert enum->pointer for data in the match tables iio: adc: ti-adc081c: Simplify probe() iio: adc: ti-ads1015: Simplify probe() iio: adc: ltc2497: Simplify probe() iio: accel: adxl345: Convert enum->pointer for data in match data table iio: accel: adxl345: Simplify adxl345_read_raw() iio: dac: mcp4725: Replace variable 'id' from struct mcp4725_data iio: dac: mcp4725: Use i2c_get_match_data() iio: dac: mcp4725: Add use_ext_ref_voltage to struct mcp4725_chip_info iio: dac: mcp4725: Add dac_reg_offset to struct mcp4725_chip_info iio: pressure: ms5637: Use i2c_get_match_data() David Lechner (39): staging: iio: resolver: ad2s1210: fix ad2s1210_show_fault staging: iio: resolver: ad2s1210: fix not restoring sample gpio in channel read staging: iio: resolver: ad2s1210: fix use before initialization staging: iio: resolver: ad2s1210: remove call to spi_setup() staging: iio: resolver: ad2s1210: check return of ad2s1210_initial() staging: iio: resolver: ad2s1210: remove spi_set_drvdata() staging: iio: resolver: ad2s1210: sort imports staging: iio: resolver: ad2s1210: always use 16-bit value for raw read staging: iio: resolver: ad2s1210: implement IIO_CHAN_INFO_SCALE staging: iio: resolver: ad2s1210: use devicetree to get CLKIN rate staging: iio: resolver: ad2s1210: use regmap for config registers staging: iio: resolver: ad2s1210: add debugfs reg access staging: iio: resolver: ad2s1210: remove config attribute staging: iio: resolver: ad2s1210: rework gpios staging: iio: resolver: ad2s1210: refactor setting excitation frequency staging: iio: resolver: ad2s1210: read excitation frequency from control register dt-bindings: iio: resolver: add devicetree bindings for ad2s1210 staging: iio: resolver: ad2s1210: do not use fault register for dummy read staging: iio: resolver: ad2s1210: implement hysteresis as channel attr staging: iio: resolver: ad2s1210: convert fexcit to channel attribute staging: iio: resolver: ad2s1210: convert resolution to devicetree property staging: iio: resolver: ad2s1210: add phase lock range support staging: iio: resolver: ad2s1210: add triggered buffer support staging: iio: resolver: ad2s1210: convert LOT threshold attrs to event attrs staging: iio: resolver: ad2s1210: convert LOS threshold to event attr staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs iio: event: add optional event label support staging: iio: resolver: ad2s1210: implement fault events staging: iio: resolver: ad2s1210: add register/fault support summary staging: iio: resolver: ad2s1210: add label attribute support staging: iio: resolver: ad2s1210: remove fault attribute staging: iio: resolver: ad2s1210: refactor sample toggle staging: iio: resolver: ad2s1210: clear faults after soft reset staging: iio: resolver: ad2s1210: simplify code with guard(mutex) iio: resolver: ad2s1210: move out of staging iio: resolver: ad2s1210: remove DRV_NAME macro iio: resolver: ad2s1210: remove of_match_ptr() George Stark (1): iio: adc: meson: improve error logging at probe stage Javier Carrasco (2): iio: si7005: Add device tree support dt-bindings: trivial-devices: add silabs,si7005 Jinjie Ruan (10): iio: adc: mt6577_auxadc: Use devm_clk_get_enabled() helper function iio: adc: spear_adc: Use device managed function iio: adc: spear_adc: Use dev_err_probe() iio: adc: mt6577_auxadc: Simplify with dev_err_probe() iio: adc: mt6577_auxadc: Simplify with device managed function staging: iio: Use devm_clk_get_enabled() helper function iio: frequency: adf4350: Use device managed functions and fix power down issue. iio: adc: at91_adc: Use devm_request_irq() helper function iio: adc: at91_adc: Use devm_clk_get_enabled() helper function iio: adc: at91_adc: Simplify with dev_err_probe() Jonathan Cameron (2): Merge branch 'ib-iio-hid-sensors-v6.6-rc1' into togreg Revert "dt-bindings: iio: magnetometer: asahi-kasei,ak8975: Drop deprecated enums" Justin Stitt (1): iio: adc: stm32-adc: Replace deprecated strncpy() with strscpy() Lars-Peter Clausen (1): iio: ad4310: Replace devm_clk_register() with devm_clk_hw_register() Liam Beguin (2): dt-bindings: iio: adc: add lltc,ltc2309 bindings iio: adc: add ltc2309 support Luca Ceresoli (1): iio: accel: mxc4005: allow module autoloading via OF compatible Marcus Folkesson (6): dt-bindings: iio: adc: mcp3911: add support for the whole MCP39xx family iio: adc: mcp3911: make use of dev_err_probe() iio: adc: mcp3911: simplify usage of spi->dev iio: adc: mcp3911: fix indentation iio: adc: mcp3911: avoid ambiguity parameters in macros iio: adc: mcp3911: add support for the whole MCP39xx family Marek Vasut (2): iio: adc: ti-ads1015: Add edge trigger support dt-bindings: iio: adc: ti,ads1015: Document optional interrupt line Marius Cristea (4): dt-bindings: iio: adc: adding MCP3564 ADC iio: adc: adding support for MCP3564 ADC iio: adc: MCP3564: fix the static checker warning iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero. Martin Kepplinger (1): dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property Matti Vaittinen (7): iio: improve doc for available_scan_mask dt-bindings: Add ROHM BM1390 pressure sensor iio: pressure: Support ROHM BU1390 MAINTAINERS: Add ROHM BM1390 dt-bindings: iio: Add KX132ACR-LBZ accelerometer iio: kx022a: Support ROHM KX132ACR-LBZ tools: iio: iio_generic_buffer ensure alignment Mehdi Djait (7): dt-bindings: iio: Add KX132-1211 accelerometer iio: accel: kionix-kx022a: Remove blank lines iio: accel: kionix-kx022a: Warn on failed matches and assume compatibility iio: accel: kionix-kx022a: Add an i2c_device_id table iio: accel: kionix-kx022a: Refactor driver and add chip_info structure iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer Michael Hennerich (1): iio: amplifiers: hmc425a: Add Support HMC540S 4-bit Attenuator Ramona Bolboaca (3): iio: Add IIO_DELTA_ANGL channel type iio: Add IIO_DELTA_VELOCITY channel type iio: imu: adis16475.c: Add delta angle and delta velocity channels Ramona Gradinariu (2): iio: imu: adis16475: Add buffer padding after temp channel drivers: imu: adis16475.c: Remove scan index from delta channels Rob Herring (1): iio: Use device_get_match_data() Uwe Kleine-König (49): iio: accel: hid-sensor-accel-3d: Convert to platform remove callback returning void iio: adc: ab8500-gpadc: Convert to platform remove callback returning void iio: adc: at91-sama5d2: Convert to platform remove callback returning void iio: adc: at91: Convert to platform remove callback returning void iio: adc: axp20x: Convert to platform remove callback returning void iio: adc: bcm_iproc: Convert to platform remove callback returning void iio: adc: dln2: Convert to platform remove callback returning void iio: adc: ep93xx: Convert to platform remove callback returning void iio: adc: exynos: Convert to platform remove callback returning void iio: adc: fsl-imx25-gcq: Convert to platform remove callback returning void iio: adc: hx711: Convert to platform remove callback returning void iio: adc: imx8qxp: Convert to platform remove callback returning void iio: adc: imx93: Convert to platform remove callback returning void iio: adc: meson_saradc: Convert to platform remove callback returning void iio: adc: mp2629: Convert to platform remove callback returning void iio: adc: mxs-lradc: Convert to platform remove callback returning void iio: adc: npcm: Convert to platform remove callback returning void iio: adc: qcom-pm8xxx-xoadc: Convert to platform remove callback returning void iio: adc: rcar-gyroadc: Convert to platform remove callback returning void iio: adc: stm32-adc-core: Convert to platform remove callback returning void iio: adc: stm32-adc: Convert to platform remove callback returning void iio: adc: stm32-dfsdm-adc: Convert to platform remove callback returning void iio: adc: stm32-dfsdm-core: Convert to platform remove callback returning void iio: adc: sun4i-gpadc-iio: Convert to platform remove callback returning void iio: adc: ti_am335x_adc: Convert to platform remove callback returning void iio: adc: twl4030-madc: Convert to platform remove callback returning void iio: adc: twl6030-gpadc: Convert to platform remove callback returning void iio: adc: vf610_adc: Convert to platform remove callback returning void iio: dac: dpot-dac: Convert to platform remove callback returning void iio: dac: lpc18xx_dac: Convert to platform remove callback returning void iio: dac: stm32-dac-core: Convert to platform remove callback returning void iio: dac: stm32-dac: Convert to platform remove callback returning void iio: dac: vf610: Convert to platform remove callback returning void iio: gyro: hid-sensor-gyro-3d: Convert to platform remove callback returning void iio: humidity: hid-sensor-humidity: Convert to platform remove callback returning void iio: light: cm3605: Convert to platform remove callback returning void iio: light: hid-sensor-als: Convert to platform remove callback returning void iio: light: hid-sensor-prox: Convert to platform remove callback returning void iio: light: lm3533-als: Convert to platform remove callback returning void iio: magnetometer: hid-sensor-magn-3d: Convert to platform remove callback returning void iio: orientation: hid-sensor-incl-3d: Convert to platform remove callback returning void iio: orientation: hid-sensor-rotation: Convert to platform remove callback returning void iio: position: hid-sensor-custom-intel-hinge: Convert to platform remove callback returning void iio: pressure: hid-sensor: Convert to platform remove callback returning void iio: proximity: cros_ec_mkbp: Convert to platform remove callback returning void iio: proximity: srf04: Convert to platform remove callback returning void iio: temperature: hid-sensor: Convert to platform remove callback returning void iio: trigger: iio-trig-interrupt: Convert to platform remove callback returning void iio: trigger: stm32-timer: Convert to platform remove callback returning void William Breathitt Gray (1): iio: addac: stx104: Add 8254 Counter/Timer support Yue Haibing (1): iio: Remove unused declarations Zhang Shurong (1): iio: adc: stm32-adc: harden against NULL pointer deref in stm32_adc_probe() Documentation/ABI/testing/sysfs-bus-iio | 75 + .../ABI/testing/sysfs-bus-iio-adc-mcp3564 | 53 + .../ABI/testing/sysfs-bus-iio-resolver-ad2s1210 | 27 + .../bindings/iio/accel/kionix,kx022a.yaml | 14 +- .../devicetree/bindings/iio/adc/lltc,ltc2497.yaml | 20 +- .../bindings/iio/adc/microchip,mcp3564.yaml | 205 +++ .../bindings/iio/adc/microchip,mcp3911.yaml | 6 + .../devicetree/bindings/iio/adc/ti,ads1015.yaml | 3 + .../bindings/iio/adc/ti,twl6030-gpadc.yaml | 43 + .../bindings/iio/amplifiers/adi,hmc425a.yaml | 12 +- .../bindings/iio/imu/invensense,mpu6050.yaml | 5 + .../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 3 + .../bindings/iio/pressure/rohm,bm1390.yaml | 52 + .../bindings/iio/resolver/adi,ad2s1210.yaml | 177 +++ .../devicetree/bindings/trivial-devices.yaml | 2 + MAINTAINERS | 19 +- .../amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.c | 7 + .../amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.h | 3 + .../hid_descriptor/amd_sfh_hid_report_desc.h | 21 + drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c | 9 + drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h | 15 + drivers/iio/accel/Kconfig | 10 +- drivers/iio/accel/adxl345.h | 21 +- drivers/iio/accel/adxl345_core.c | 47 +- drivers/iio/accel/adxl345_i2c.c | 20 +- drivers/iio/accel/adxl345_spi.c | 20 +- drivers/iio/accel/bma180.c | 27 +- drivers/iio/accel/fxls8962af.h | 1 - drivers/iio/accel/hid-sensor-accel-3d.c | 6 +- drivers/iio/accel/kionix-kx022a-i2c.c | 24 +- drivers/iio/accel/kionix-kx022a-spi.c | 19 +- drivers/iio/accel/kionix-kx022a.c | 351 ++++- drivers/iio/accel/kionix-kx022a.h | 114 +- drivers/iio/accel/mma8452.c | 28 +- drivers/iio/accel/msa311.c | 2 +- drivers/iio/accel/mxc4005.c | 8 + drivers/iio/adc/Kconfig | 29 +- drivers/iio/adc/Makefile | 2 + drivers/iio/adc/ab8500-gpadc.c | 6 +- drivers/iio/adc/ad4130.c | 15 +- drivers/iio/adc/ad7192.c | 269 ++-- drivers/iio/adc/at91-sama5d2_adc.c | 6 +- drivers/iio/adc/at91_adc.c | 114 +- drivers/iio/adc/axp20x_adc.c | 6 +- drivers/iio/adc/bcm_iproc_adc.c | 6 +- drivers/iio/adc/dln2-adc.c | 5 +- drivers/iio/adc/ep93xx_adc.c | 6 +- drivers/iio/adc/exynos_adc.c | 6 +- drivers/iio/adc/fsl-imx25-gcq.c | 6 +- drivers/iio/adc/hx711.c | 6 +- drivers/iio/adc/imx8qxp-adc.c | 6 +- drivers/iio/adc/imx93_adc.c | 6 +- drivers/iio/adc/ltc2309.c | 246 ++++ drivers/iio/adc/ltc2497.c | 5 +- drivers/iio/adc/max1363.c | 87 +- drivers/iio/adc/mcp3564.c | 1513 +++++++++++++++++++ drivers/iio/adc/mcp3911.c | 562 ++++++-- drivers/iio/adc/meson_saradc.c | 22 +- drivers/iio/adc/mp2629_adc.c | 6 +- drivers/iio/adc/mt6577_auxadc.c | 72 +- drivers/iio/adc/mxs-lradc-adc.c | 6 +- drivers/iio/adc/npcm_adc.c | 6 +- drivers/iio/adc/palmas_gpadc.c | 2 +- drivers/iio/adc/qcom-pm8xxx-xoadc.c | 6 +- drivers/iio/adc/rcar-gyroadc.c | 6 +- drivers/iio/adc/spear_adc.c | 64 +- drivers/iio/adc/stm32-adc-core.c | 12 +- drivers/iio/adc/stm32-adc.c | 8 +- drivers/iio/adc/stm32-dfsdm-adc.c | 6 +- drivers/iio/adc/stm32-dfsdm-core.c | 6 +- drivers/iio/adc/sun4i-gpadc-iio.c | 8 +- drivers/iio/adc/ti-adc081c.c | 12 +- drivers/iio/adc/ti-ads1015.c | 7 +- drivers/iio/adc/ti_am335x_adc.c | 6 +- drivers/iio/adc/twl4030-madc.c | 6 +- drivers/iio/adc/twl6030-gpadc.c | 16 +- drivers/iio/adc/vf610_adc.c | 6 +- drivers/iio/addac/Kconfig | 1 + drivers/iio/addac/ad74413r.c | 24 +- drivers/iio/addac/stx104.c | 61 +- drivers/iio/amplifiers/hmc425a.c | 17 + drivers/iio/chemical/atlas-ezo-sensor.c | 6 +- drivers/iio/chemical/atlas-sensor.c | 32 +- drivers/iio/chemical/sgp30.c | 24 +- drivers/iio/chemical/vz89x.c | 16 +- drivers/iio/dac/dpot-dac.c | 6 +- drivers/iio/dac/lpc18xx_dac.c | 6 +- drivers/iio/dac/mcp4725.c | 42 +- drivers/iio/dac/stm32-dac-core.c | 15 +- drivers/iio/dac/stm32-dac.c | 9 +- drivers/iio/dac/ti-dac5571.c | 48 +- drivers/iio/dac/vf610_dac.c | 6 +- drivers/iio/frequency/adf4350.c | 75 +- drivers/iio/gyro/hid-sensor-gyro-3d.c | 6 +- drivers/iio/humidity/hid-sensor-humidity.c | 6 +- drivers/iio/humidity/si7005.c | 7 + drivers/iio/iio_core.h | 3 - drivers/iio/imu/adis16475.c | 238 ++- drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c | 13 + drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 3 + drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 +- drivers/iio/industrialio-core.c | 4 + drivers/iio/industrialio-event.c | 55 + drivers/iio/light/cm3605.c | 6 +- drivers/iio/light/hid-sensor-als.c | 136 +- drivers/iio/light/hid-sensor-prox.c | 6 +- drivers/iio/light/lm3533-als.c | 6 +- drivers/iio/light/opt4001.c | 2 +- drivers/iio/magnetometer/ak8975.c | 97 +- drivers/iio/magnetometer/hid-sensor-magn-3d.c | 6 +- drivers/iio/magnetometer/yamaha-yas530.c | 4 +- drivers/iio/orientation/hid-sensor-incl-3d.c | 6 +- drivers/iio/orientation/hid-sensor-rotation.c | 6 +- .../iio/position/hid-sensor-custom-intel-hinge.c | 6 +- drivers/iio/potentiometer/ad5110.c | 21 +- drivers/iio/potentiometer/ds1803.c | 13 +- drivers/iio/pressure/Kconfig | 9 + drivers/iio/pressure/Makefile | 1 + drivers/iio/pressure/hid-sensor-press.c | 6 +- drivers/iio/pressure/ms5637.c | 6 +- drivers/iio/pressure/rohm-bm1390.c | 934 ++++++++++++ drivers/iio/proximity/cros_ec_mkbp_proximity.c | 6 +- drivers/iio/proximity/srf04.c | 6 +- drivers/iio/proximity/sx9310.c | 46 +- drivers/iio/resolver/Kconfig | 13 + drivers/iio/resolver/Makefile | 1 + drivers/iio/resolver/ad2s1210.c | 1519 ++++++++++++++++++++ drivers/iio/temperature/hid-sensor-temperature.c | 6 +- drivers/iio/temperature/mlx90614.c | 2 +- drivers/iio/temperature/tmp117.c | 94 +- drivers/iio/trigger/iio-trig-interrupt.c | 6 +- drivers/iio/trigger/stm32-timer-trigger.c | 6 +- drivers/staging/iio/Kconfig | 1 - drivers/staging/iio/Makefile | 1 - drivers/staging/iio/frequency/ad9832.c | 15 +- drivers/staging/iio/frequency/ad9834.c | 21 +- drivers/staging/iio/impedance-analyzer/ad5933.c | 22 +- drivers/staging/iio/resolver/Kconfig | 18 - drivers/staging/iio/resolver/Makefile | 6 - drivers/staging/iio/resolver/ad2s1210.c | 716 --------- include/linux/hid-sensor-ids.h | 4 + include/linux/iio/iio.h | 12 +- include/linux/iio/sw_device.h | 3 - include/linux/iio/sw_trigger.h | 3 - include/uapi/linux/iio/types.h | 4 + tools/iio/iio_event_monitor.c | 8 + tools/iio/iio_generic_buffer.c | 13 +- 147 files changed, 7205 insertions(+), 2002 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-resolver-ad2s1210 create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml create mode 100644 Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml create mode 100644 Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml create mode 100644 drivers/iio/adc/ltc2309.c create mode 100644 drivers/iio/adc/mcp3564.c create mode 100644 drivers/iio/pressure/rohm-bm1390.c create mode 100644 drivers/iio/resolver/ad2s1210.c delete mode 100644 drivers/staging/iio/resolver/Kconfig delete mode 100644 drivers/staging/iio/resolver/Makefile delete mode 100644 drivers/staging/iio/resolver/ad2s1210.c