@@ -4,17 +4,26 @@
$id: http://devicetree.org/schemas/iio/light/avago,apds9300.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Avago APDS9300 ambient light sensor
+title: Avago Gesture, RGB, ALS and Proximity sensors
maintainers:
- Jonathan Cameron <jic23@kernel.org>
+ - Matt Ranostay <matt@ranostay.sg>
+ - Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
description: |
- Datasheet at https://www.avagotech.com/docs/AV02-1077EN
+ Avago (Broadcom) optical and proximity sensors with I2C interfaces.
+ Datasheet: https://docs.broadcom.com/doc/AV02-1077EN
+ Datasheet: https://docs.broadcom.com/doc/AV02-4191EN
+ Datasheet: https://docs.broadcom.com/doc/AV02-4755EN
properties:
compatible:
- const: avago,apds9300
+ oneOf:
+ - enum:
+ - avago,apds9300
+ - avago,apds9306
+ - avago,apds9960
reg:
maxItems: 1
@@ -22,14 +31,30 @@ properties:
interrupts:
maxItems: 1
-additionalProperties: false
+ vdd-supply: true
required:
- compatible
- reg
+allOf:
+ - $ref: ../common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - avago,apds9960
+ then:
+ required:
+ - interrupts
+
+additionalProperties: false
+
examples:
- |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -38,7 +63,7 @@ examples:
compatible = "avago,apds9300";
reg = <0x39>;
interrupt-parent = <&gpio2>;
- interrupts = <29 8>;
+ interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
};
};
...
deleted file mode 100644
@@ -1,44 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/iio/light/avago,apds9960.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Avago APDS9960 gesture/RGB/ALS/proximity sensor
-
-maintainers:
- - Matt Ranostay <matt.ranostay@konsulko.com>
-
-description: |
- Datasheet at https://www.avagotech.com/docs/AV02-4191EN
-
-properties:
- compatible:
- const: avago,apds9960
-
- reg:
- maxItems: 1
-
- interrupts:
- maxItems: 1
-
-additionalProperties: false
-
-required:
- - compatible
- - reg
-
-examples:
- - |
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- light-sensor@39 {
- compatible = "avago,apds9960";
- reg = <0x39>;
- interrupt-parent = <&gpio1>;
- interrupts = <16 1>;
- };
- };
-...
v0 -> v1 - Squashing Avago (Broadcom) APDS9300 and APDS9960 schemas into one as they look similar - Adding support for APDS9306 in the same schema file - Adding mandatory interrupt property requirement for APDS9960 as per the driver's probe method which fails if interrupt bindings are not defined. Both APDS9300 and APDS9306 (this patch set) supports sensors with and without hardware interrupt bindings - In the device tree example, replacing interrupt type number with macro from irq.h - Updated the vin to vdd which is the same for all the three sensors - Used proper "Datasheet:" tags Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com> --- .../bindings/iio/light/avago,apds9300.yaml | 35 ++++++++++++--- .../bindings/iio/light/avago,apds9960.yaml | 44 ------------------- 2 files changed, 30 insertions(+), 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml