| Message ID | 20231213-dev-iio-backend-v3-1-bb9f12a5c6dc@analog.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | iio: add new backend framework | expand |
On Wed, 13 Dec 2023 16:02:32 +0100, Nuno Sa wrote: > The ad9467 will make use of the new IIO backend framework which is a > provider - consumer interface where IIO backends provide services to > consumers. As such, and being this device a consumer, add the new > generic io-backend property to the bindings. > > Signed-off-by: Nuno Sa <nuno.sa@analog.com> > --- > Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml | 5 +++++ > 1 file changed, 5 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml: io-backends: missing type definition doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231213-dev-iio-backend-v3-1-bb9f12a5c6dc@analog.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Wed, 2023-12-13 at 11:55 -0600, Rob Herring wrote: > > On Wed, 13 Dec 2023 16:02:32 +0100, Nuno Sa wrote: > > The ad9467 will make use of the new IIO backend framework which is a > > provider - consumer interface where IIO backends provide services to > > consumers. As such, and being this device a consumer, add the new > > generic io-backend property to the bindings. > > > > Signed-off-by: Nuno Sa <nuno.sa@analog.com> > > --- > > Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review- > ci/linux/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml: io-backends: > missing type definition > > doc reference errors (make refcheckdocs): > > See > https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231213-dev-iio-backend-v3-1-bb9f12a5c6dc@analog.com > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. > This is kind of expected as the property is being proposed as a generic one... - Nuno Sá
On Wed, Dec 13, 2023 at 04:02:32PM +0100, Nuno Sa wrote: > The ad9467 will make use of the new IIO backend framework which is a > provider - consumer interface where IIO backends provide services to > consumers. As such, and being this device a consumer, add the new > generic io-backend property to the bindings. > > Signed-off-by: Nuno Sa <nuno.sa@analog.com> > --- > Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml > index 7aa748d6b7a0..74e6827cbd47 100644 > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml > @@ -44,6 +44,9 @@ properties: > Pin that controls the powerdown mode of the device. > maxItems: 1 > > + io-backends: > + maxItems: 1 > + > reset-gpios: > description: > Reset pin for the device. > @@ -54,6 +57,7 @@ required: > - reg > - clocks > - clock-names > + - io-backends New required properties are an ABI break. Please justify this in the commit message. Rob
On Thu, 2023-12-14 at 11:05 -0600, Rob Herring wrote: > On Wed, Dec 13, 2023 at 04:02:32PM +0100, Nuno Sa wrote: > > The ad9467 will make use of the new IIO backend framework which is a > > provider - consumer interface where IIO backends provide services to > > consumers. As such, and being this device a consumer, add the new > > generic io-backend property to the bindings. > > > > Signed-off-by: Nuno Sa <nuno.sa@analog.com> > > --- > > Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml > > b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml > > index 7aa748d6b7a0..74e6827cbd47 100644 > > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml > > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml > > @@ -44,6 +44,9 @@ properties: > > Pin that controls the powerdown mode of the device. > > maxItems: 1 > > > > + io-backends: > > + maxItems: 1 > > + > > reset-gpios: > > description: > > Reset pin for the device. > > @@ -54,6 +57,7 @@ required: > > - reg > > - clocks > > - clock-names > > + - io-backends > > New required properties are an ABI break. Please justify this in the > commit message. > Yeah, I know... I'll further comment on the cover and depending on the conclusion we get I'll justify it (or not if not needed) in the message. - Nuno Sá
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml index 7aa748d6b7a0..74e6827cbd47 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml @@ -44,6 +44,9 @@ properties: Pin that controls the powerdown mode of the device. maxItems: 1 + io-backends: + maxItems: 1 + reset-gpios: description: Reset pin for the device. @@ -54,6 +57,7 @@ required: - reg - clocks - clock-names + - io-backends additionalProperties: false @@ -68,6 +72,7 @@ examples: reg = <0>; clocks = <&adc_clk>; clock-names = "adc-clk"; + io-backends = <&iio_backend>; }; }; ...