| Message ID | 20231220145726.640627-2-fabrice.gasnier@foss.st.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | counter: Add stm32 timer events support | expand |
On Wed, Dec 20, 2023 at 03:57:17PM +0100, Fabrice Gasnier wrote: > Drop the Quadrature convention in the signal name. On stm32-timer: > - Quadrature A signal corresponds to timer input ch1, hence "Channel 1" > - Quadrature B signal corresponds to timer input ch2, hence "Channel 2". > So name these signals after their channel. I suspect it referred to the > (unique) quadrature counter support earlier, but the physical input > really is CH1/CH2. This will be easier to support other counter modes. > > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c index 6206d2dc3d47..36d812ddf162 100644 --- a/drivers/counter/stm32-timer-cnt.c +++ b/drivers/counter/stm32-timer-cnt.c @@ -279,11 +279,11 @@ static const struct counter_ops stm32_timer_cnt_ops = { static struct counter_signal stm32_signals[] = { { .id = 0, - .name = "Channel 1 Quadrature A" + .name = "Channel 1" }, { .id = 1, - .name = "Channel 1 Quadrature B" + .name = "Channel 2" } };
Drop the Quadrature convention in the signal name. On stm32-timer: - Quadrature A signal corresponds to timer input ch1, hence "Channel 1" - Quadrature B signal corresponds to timer input ch2, hence "Channel 2". So name these signals after their channel. I suspect it referred to the (unique) quadrature counter support earlier, but the physical input really is CH1/CH2. This will be easier to support other counter modes. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> --- Changes in v2: - Drop the "Quadrature" convention from the signal name, as suggested by William --- drivers/counter/stm32-timer-cnt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)