@@ -128,6 +128,7 @@ config AD7380
select IIO_BUFFER
select IIO_TRIGGER
select IIO_TRIGGERED_BUFFER
+ select IIO_HW_TRIGGERED_BUFFER
help
AD7380 is a family of simultaneous sampling ADCs that share the same
SPI register map and have similar pinouts.
@@ -20,6 +20,7 @@
#include <linux/sysfs.h>
#include <linux/iio/buffer.h>
+#include <linux/iio/hw_triggered_buffer.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger_consumer.h>
@@ -133,6 +134,7 @@ struct ad7380_state {
struct spi_device *spi;
struct regulator *vref;
struct regmap *regmap;
+ struct spi_offload *spi_offload;
/*
* DMA (thus cache coherency maintenance) requires the
* transfer buffers to live in their own cache lines.
@@ -335,6 +337,50 @@ static const struct iio_info ad7380_info = {
.debugfs_reg_access = &ad7380_debugfs_reg_access,
};
+static int ad7380_buffer_preenable(struct iio_dev *indio_dev)
+{
+ struct ad7380_state *st = iio_priv(indio_dev);
+ struct spi_transfer xfer = {
+ .bits_per_word = st->chip_info->channels[0].scan_type.realbits,
+ .len = 4,
+ .rx_buf = SPI_OFFLOAD_RX_SENTINEL,
+ };
+
+ return spi_offload_prepare(st->spi_offload, st->spi, &xfer, 1);
+}
+
+static int ad7380_buffer_postenable(struct iio_dev *indio_dev)
+{
+ struct ad7380_state *st = iio_priv(indio_dev);
+
+ return spi_offload_enable(st->spi_offload);
+}
+
+static int ad7380_buffer_predisable(struct iio_dev *indio_dev)
+{
+ struct ad7380_state *st = iio_priv(indio_dev);
+
+ spi_offload_disable(st->spi_offload);
+
+ return 0;
+}
+
+static int ad7380_buffer_postdisable(struct iio_dev *indio_dev)
+{
+ struct ad7380_state *st = iio_priv(indio_dev);
+
+ spi_offload_unprepare(st->spi_offload);
+
+ return 0;
+}
+
+static const struct iio_buffer_setup_ops ad7380_buffer_ops = {
+ .preenable = &ad7380_buffer_preenable,
+ .postenable = &ad7380_buffer_postenable,
+ .predisable = &ad7380_buffer_predisable,
+ .postdisable = &ad7380_buffer_postdisable,
+};
+
static int ad7380_init(struct ad7380_state *st)
{
int ret;
@@ -417,11 +463,39 @@ static int ad7380_probe(struct spi_device *spi)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->available_scan_masks = ad7380_2_channel_scan_masks;
- ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
- iio_pollfunc_store_time,
- ad7380_trigger_handler, NULL);
- if (ret)
- return ret;
+ st->spi_offload = spi_offload_get(spi, 0);
+ if (IS_ERR(st->spi_offload)) {
+ ret = PTR_ERR(st->spi_offload);
+
+ if (ret == -EOPNOTSUPP)
+ st->spi_offload = NULL;
+ else
+ return dev_err_probe(&spi->dev, ret,
+ "failed to get SPI offload\n");
+ }
+
+ if (st->spi_offload) {
+ /*
+ * We can't have a soft timestamp (always last channel) when
+ * using a hardware triggered buffer.
+ */
+ indio_dev->num_channels -= 1;
+
+ ret = devm_iio_hw_triggered_buffer_setup(&spi->dev,
+ indio_dev,
+ st->spi_offload->dev,
+ &ad7380_buffer_ops);
+ if (ret)
+ return dev_err_probe(&spi->dev, ret,
+ "failed to setup offload\n");
+ } else {
+ ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
+ iio_pollfunc_store_time,
+ ad7380_trigger_handler,
+ NULL);
+ if (ret)
+ return ret;
+ }
ret = ad7380_init(st);
if (ret)
This extends the ad7380 ADC driver to use the offload capabilities of capable SPI controllers. When offload support is available, a hardware triggered buffer is used to allow sampling a high rates without CPU intervention. To keep things simple, when this feature is present in hardware we disable the usual IIO triggered buffer and software timestamp rather than trying to support multiple buffers. Signed-off-by: David Lechner <dlechner@baylibre.com> --- drivers/iio/adc/Kconfig | 1 + drivers/iio/adc/ad7380.c | 84 +++++++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 80 insertions(+), 5 deletions(-)