| Message ID | 20240114172009.179893-13-jic23@kernel.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling. | expand |
On Sun, 2024-01-14 at 17:20 +0000, Jonathan Cameron wrote: > From: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > This use of the new cleanup.h scope based freeing infrastructure allows > us to exit directly from error conditions within the > device_for_each_child_node(dev, child) loop. On normal exit from that > loop no fwnode_handle reference will be held and the child pointer > will be NULL thus making the automatically run fwnode_handle_put() a > noop. > > Cc: Nuno Sá <nuno.sa@analog.com> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > --- Just one minor comment on my side. With that: Reviewed-by: Nuno Sa <nuno.sa@analog.com> I might be able to give this a quick test. Let's see if I can find the time for it :) > drivers/iio/dac/ltc2688.c | 23 ++++++----------------- > 1 file changed, 6 insertions(+), 17 deletions(-) > > diff --git a/drivers/iio/dac/ltc2688.c b/drivers/iio/dac/ltc2688.c > index fc8eb53c65be..e8add3636af9 100644 > --- a/drivers/iio/dac/ltc2688.c > +++ b/drivers/iio/dac/ltc2688.c > @@ -746,7 +746,7 @@ static int ltc2688_span_lookup(const struct ltc2688_state > *st, int min, int max) > static int ltc2688_channel_config(struct ltc2688_state *st) > { > struct device *dev = &st->spi->dev; > - struct fwnode_handle *child; > + struct fwnode_handle *child __free(fwnode_handle) = NULL; > u32 reg, clk_input, val, tmp[2]; > int ret, span; > > @@ -754,18 +754,14 @@ static int ltc2688_channel_config(struct ltc2688_state > *st) > struct ltc2688_chan *chan; > > ret = fwnode_property_read_u32(child, "reg", ®); > - if (ret) { > - fwnode_handle_put(child); > + if (ret) > return dev_err_probe(dev, ret, > "Failed to get reg property\n"); > - } > > - if (reg >= LTC2688_DAC_CHANNELS) { > - fwnode_handle_put(child); > + if (reg >= LTC2688_DAC_CHANNELS) > return dev_err_probe(dev, -EINVAL, > "reg bigger than: %d\n", > LTC2688_DAC_CHANNELS); > - } > > val = 0; > chan = &st->channels[reg]; > @@ -786,12 +782,10 @@ static int ltc2688_channel_config(struct ltc2688_state > *st) > if (!ret) { > span = ltc2688_span_lookup(st, (int)tmp[0] / 1000, > tmp[1] / 1000); > - if (span < 0) { > - fwnode_handle_put(child); > + if (span < 0) > return dev_err_probe(dev, -EINVAL, > "output range not > valid:[%d %d]\n", > tmp[0], tmp[1]); > - } > > val |= FIELD_PREP(LTC2688_CH_SPAN_MSK, span); > } > @@ -800,17 +794,14 @@ static int ltc2688_channel_config(struct ltc2688_state > *st) > &clk_input); > if (!ret) { > if (clk_input >= LTC2688_CH_TGP_MAX) { We can now remove the brackets... > - fwnode_handle_put(child); > return dev_err_probe(dev, -EINVAL, > "toggle-dither-input inv > value(%d)\n", > clk_input); > } > > ret = ltc2688_tgp_clk_setup(st, chan, child, > clk_input); > - if (ret) { > - fwnode_handle_put(child); > + if (ret) > return ret; > - } > > /* > * 0 means software toggle which is the default mode. > @@ -844,11 +835,9 @@ static int ltc2688_channel_config(struct ltc2688_state > *st) > > ret = regmap_write(st->regmap, LTC2688_CMD_CH_SETTING(reg), > val); > - if (ret) { > - fwnode_handle_put(child); > + if (ret) > return dev_err_probe(dev, -EINVAL, > "failed to set chan > settings\n"); > - } > } > > return 0;
diff --git a/drivers/iio/dac/ltc2688.c b/drivers/iio/dac/ltc2688.c index fc8eb53c65be..e8add3636af9 100644 --- a/drivers/iio/dac/ltc2688.c +++ b/drivers/iio/dac/ltc2688.c @@ -746,7 +746,7 @@ static int ltc2688_span_lookup(const struct ltc2688_state *st, int min, int max) static int ltc2688_channel_config(struct ltc2688_state *st) { struct device *dev = &st->spi->dev; - struct fwnode_handle *child; + struct fwnode_handle *child __free(fwnode_handle) = NULL; u32 reg, clk_input, val, tmp[2]; int ret, span; @@ -754,18 +754,14 @@ static int ltc2688_channel_config(struct ltc2688_state *st) struct ltc2688_chan *chan; ret = fwnode_property_read_u32(child, "reg", ®); - if (ret) { - fwnode_handle_put(child); + if (ret) return dev_err_probe(dev, ret, "Failed to get reg property\n"); - } - if (reg >= LTC2688_DAC_CHANNELS) { - fwnode_handle_put(child); + if (reg >= LTC2688_DAC_CHANNELS) return dev_err_probe(dev, -EINVAL, "reg bigger than: %d\n", LTC2688_DAC_CHANNELS); - } val = 0; chan = &st->channels[reg]; @@ -786,12 +782,10 @@ static int ltc2688_channel_config(struct ltc2688_state *st) if (!ret) { span = ltc2688_span_lookup(st, (int)tmp[0] / 1000, tmp[1] / 1000); - if (span < 0) { - fwnode_handle_put(child); + if (span < 0) return dev_err_probe(dev, -EINVAL, "output range not valid:[%d %d]\n", tmp[0], tmp[1]); - } val |= FIELD_PREP(LTC2688_CH_SPAN_MSK, span); } @@ -800,17 +794,14 @@ static int ltc2688_channel_config(struct ltc2688_state *st) &clk_input); if (!ret) { if (clk_input >= LTC2688_CH_TGP_MAX) { - fwnode_handle_put(child); return dev_err_probe(dev, -EINVAL, "toggle-dither-input inv value(%d)\n", clk_input); } ret = ltc2688_tgp_clk_setup(st, chan, child, clk_input); - if (ret) { - fwnode_handle_put(child); + if (ret) return ret; - } /* * 0 means software toggle which is the default mode. @@ -844,11 +835,9 @@ static int ltc2688_channel_config(struct ltc2688_state *st) ret = regmap_write(st->regmap, LTC2688_CMD_CH_SETTING(reg), val); - if (ret) { - fwnode_handle_put(child); + if (ret) return dev_err_probe(dev, -EINVAL, "failed to set chan settings\n"); - } } return 0;