@@ -11,6 +11,7 @@
#include <linux/mfd/stm32-timers.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/types.h>
@@ -38,6 +39,7 @@ struct stm32_timer_cnt {
u32 max_arr;
bool enabled;
struct stm32_timer_regs bak;
+ bool has_encoder;
};
static const enum counter_function stm32_count_functions[] = {
@@ -111,12 +113,18 @@ static int stm32_count_function_write(struct counter_device *counter,
sms = TIM_SMCR_SMS_SLAVE_MODE_DISABLED;
break;
case COUNTER_FUNCTION_QUADRATURE_X2_A:
+ if (!priv->has_encoder)
+ return -EOPNOTSUPP;
sms = TIM_SMCR_SMS_ENCODER_MODE_1;
break;
case COUNTER_FUNCTION_QUADRATURE_X2_B:
+ if (!priv->has_encoder)
+ return -EOPNOTSUPP;
sms = TIM_SMCR_SMS_ENCODER_MODE_2;
break;
case COUNTER_FUNCTION_QUADRATURE_X4:
+ if (!priv->has_encoder)
+ return -EOPNOTSUPP;
sms = TIM_SMCR_SMS_ENCODER_MODE_3;
break;
default:
@@ -388,6 +396,49 @@ static struct counter_count stm32_counts = {
.num_ext = ARRAY_SIZE(stm32_count_ext)
};
+/* encoder supported on TIM1 TIM2 TIM3 TIM4 TIM5 TIM8 */
+#define STM32_TIM_ENCODER_SUPPORTED (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(7))
+
+static const char * const stm32_timer_trigger_compat[] = {
+ "st,stm32-timer-trigger",
+ "st,stm32h7-timer-trigger",
+};
+
+static int stm32_timer_cnt_probe_encoder(struct device *dev,
+ struct stm32_timer_cnt *priv)
+{
+ struct device *parent = dev->parent;
+ struct device_node *tnode = NULL, *pnode = parent->of_node;
+ int i, ret;
+ u32 idx;
+
+ /*
+ * Need to retrieve the trigger node index from DT, to be able
+ * to determine if the counter supports encoder mode. It also
+ * enforce backward compatibility, and allow to support other
+ * counter modes in this driver (when the timer doesn't support
+ * encoder).
+ */
+ for (i = 0; i < ARRAY_SIZE(stm32_timer_trigger_compat) && !tnode; i++)
+ tnode = of_get_compatible_child(pnode, stm32_timer_trigger_compat[i]);
+ if (!tnode) {
+ dev_err(dev, "Can't find trigger node\n");
+ return -ENODATA;
+ }
+
+ ret = of_property_read_u32(tnode, "reg", &idx);
+ if (ret) {
+ dev_err(dev, "Can't get index (%d)\n", ret);
+ return ret;
+ }
+
+ priv->has_encoder = !!(STM32_TIM_ENCODER_SUPPORTED & BIT(idx));
+
+ dev_dbg(dev, "encoder support: %s\n", priv->has_encoder ? "yes" : "no");
+
+ return 0;
+}
+
static int stm32_timer_cnt_probe(struct platform_device *pdev)
{
struct stm32_timers *ddata = dev_get_drvdata(pdev->dev.parent);
@@ -409,6 +460,10 @@ static int stm32_timer_cnt_probe(struct platform_device *pdev)
priv->clk = ddata->clk;
priv->max_arr = ddata->max_arr;
+ ret = stm32_timer_cnt_probe_encoder(dev, priv);
+ if (ret)
+ return ret;
+
counter->name = dev_name(dev);
counter->parent = dev;
counter->ops = &stm32_timer_cnt_ops;
This is a precursor patch to support capture channels on all possible channels and stm32 timer types. Original driver was intended to be used only as quadrature encoder and simple counter on internal clock. So, add a check on encoder capability, so the driver may be probed for timer instances without encoder feature. This way, all timers may be used as simple counter on internal clock, starting from here. Encoder capability is retrieved by using the timer index (originally in stm32-timer-trigger driver and dt-bindings). The need to keep backward compatibility with existing device tree lead to parse aside trigger node. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> --- Changes in v4: - drop idx from struct stm32_timer_cnt as unused after probing - directly use dev struct in stm32_timer_cnt_probe_encoder routine. Changes in v3: - New patch split from: "counter: stm32-timer-cnt: populate capture channels and check encoder" - return -EOPNOTSUPP when encoder function isn't supported by the timer instance. --- drivers/counter/stm32-timer-cnt.c | 55 +++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+)