[4/4] iio: common: scmi_iio: convert to dev_err_probe()

Commit Message

Nuno Sa April 4, 2024, 11:06 a.m. UTC

Make use of dev_err_probe() and dev_errp_probe() to simplify error paths
during probe.

Signed-off-by: Nuno Sa <[e-mail]>
---
 drivers/iio/common/scmi_sensors/scmi_iio.c | 45 +++++++++++++-----------------
 1 file changed, 19 insertions(+), 26 deletions(-)

Patch

diff --git a/drivers/iio/common/scmi_sensors/scmi_iio.c b/drivers/iio/common/scmi_sensors/scmi_iio.c
index 0c2caf3570db..30d58af02b4c 100644
--- a/drivers/iio/common/scmi_sensors/scmi_iio.c
+++ b/drivers/iio/common/scmi_sensors/scmi_iio.c
@@ -626,12 +626,10 @@  scmi_alloc_iiodev(struct scmi_device *sdev,
 				SCMI_PROTOCOL_SENSOR, SCMI_EVENT_SENSOR_UPDATE,
 				&sensor->sensor_info->id,
 				&sensor->sensor_update_nb);
-	if (ret) {
-		dev_err(&iiodev->dev,
-			"Error in registering sensor update notifier for sensor %s err %d",
-			sensor->sensor_info->name, ret);
-		return ERR_PTR(ret);
-	}
+	if (ret)
+		return dev_errp_probe(&iiodev->dev, ret,
+				      "Error in registering sensor update notifier for sensor %s err %d",
+				      sensor->sensor_info->name, ret);
 
 	scmi_iio_set_timestamp_channel(&iio_channels[i], i);
 	iiodev->channels = iio_channels;
@@ -653,10 +651,9 @@  static int scmi_iio_dev_probe(struct scmi_device *sdev)
 		return -ENODEV;
 
 	sensor_ops = handle->devm_protocol_get(sdev, SCMI_PROTOCOL_SENSOR, &ph);
-	if (IS_ERR(sensor_ops)) {
-		dev_err(dev, "SCMI device has no sensor interface\n");
-		return PTR_ERR(sensor_ops);
-	}
+	if (IS_ERR(sensor_ops))
+		return dev_err_probe(dev, PTR_ERR(sensor_ops),
+				     "SCMI device has no sensor interface\n");
 
 	nr_sensors = sensor_ops->count_get(ph);
 	if (!nr_sensors) {
@@ -667,8 +664,8 @@  static int scmi_iio_dev_probe(struct scmi_device *sdev)
 	for (i = 0; i < nr_sensors; i++) {
 		sensor_info = sensor_ops->info_get(ph, i);
 		if (!sensor_info) {
-			dev_err(dev, "SCMI sensor %d has missing info\n", i);
-			return -EINVAL;
+			return dev_err_probe(dev, -EINVAL,
+					     "SCMI sensor %d has missing info\n", i);
 		}
 
 		/* This driver only supports 3-axis accel and gyro, skipping other sensors */
@@ -683,29 +680,25 @@  static int scmi_iio_dev_probe(struct scmi_device *sdev)
 		scmi_iio_dev = scmi_alloc_iiodev(sdev, sensor_ops, ph,
 						 sensor_info);
 		if (IS_ERR(scmi_iio_dev)) {
-			dev_err(dev,
-				"failed to allocate IIO device for sensor %s: %ld\n",
-				sensor_info->name, PTR_ERR(scmi_iio_dev));
-			return PTR_ERR(scmi_iio_dev);
+			return dev_err_probe(dev, PTR_ERR(scmi_iio_dev),
+					     "failed to allocate IIO device for sensor %s: %ld\n",
+					     sensor_info->name, PTR_ERR(scmi_iio_dev));
 		}
 
 		err = devm_iio_kfifo_buffer_setup(&scmi_iio_dev->dev,
 						  scmi_iio_dev,
 						  &scmi_iio_buffer_ops);
 		if (err < 0) {
-			dev_err(dev,
-				"IIO buffer setup error at sensor %s: %d\n",
-				sensor_info->name, err);
-			return err;
+			return dev_err_probe(dev, err,
+					     "IIO buffer setup error at sensor %s: %d\n",
+					     sensor_info->name, err);
 		}
 
 		err = devm_iio_device_register(dev, scmi_iio_dev);
-		if (err) {
-			dev_err(dev,
-				"IIO device registration failed at sensor %s: %d\n",
-				sensor_info->name, err);
-			return err;
-		}
+		if (err)
+			return dev_err_probe(dev, err,
+					     "IIO device registration failed at sensor %s: %d\n",
+					     sensor_info->name, err);
 	}
 	return err;
 }