diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml
new file mode 100644
index 000000000000..8ff5bbbbef9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml
@@ -0,0 +1,297 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4695.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices Easy Drive Multiplexed SAR Analog to Digital Converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  A family of similar multi-channel analog to digital converters with SPI bus.
+
+  * https://www.analog.com/en/products/ad4695.html
+  * https://www.analog.com/en/products/ad4696.html
+  * https://www.analog.com/en/products/ad4697.html
+  * https://www.analog.com/en/products/ad4698.html
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - adi,ad4695
+          - adi,ad4697
+      # same chips in WLCSP package with more pins
+      - items:
+          - const: adi,ad4695-wlcsp
+          - const: adi,ad4695
+      - items:
+          - const: adi,ad4697-wlcsp
+          - const: adi,ad4697
+      # same chips with higher max sample rate
+      - items:
+          - const: adi,ad4696
+          - const: adi,ad4695
+      - items:
+          - const: adi,ad4698
+          - const: adi,ad4697
+      # same chips with higher max sample rate in WLCSP package
+      - items:
+          - const: adi,ad4696-wlcsp
+          - const: adi,ad4696
+          - const: adi,ad4695-wlcsp
+          - const: adi,ad4695
+      - items:
+          - const: adi,ad4698-wlcsp
+          - const: adi,ad4698
+          - const: adi,ad4697-wlcsp
+          - const: adi,ad4697
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 80000000
+
+  spi-cpol: true
+  spi-cpha: true
+
+  spi-rx-bus-width:
+    minimum: 1
+    maximum: 4
+
+  avdd-supply:
+    description: A 2.7 V to 5.5 V supply that powers the analog circuitry.
+
+  ldo-in-supply:
+    description: A 2.4 V to 5.5 V supply connected to the internal LDO input.
+
+  vdd-supply:
+    description: A 1.8V supply that powers the core circuitry.
+
+  vio-supply:
+    description: A 1.2V to 1.8V supply for the digital inputs and outputs.
+
+  ref-supply:
+    description: A 2.4 V to 5.1 V supply for the external reference voltage.
+
+  refin-supply:
+    description: A 2.4 V to 5.1 V supply for the internal reference buffer input.
+
+  com-supply:
+    description: Common voltage supply for pseudo-differential analog inputs.
+
+  adi,no-ref-current-limit:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When this flag is present, the REF Overvoltage Reduced Current protection
+      is disabled.
+
+  adi,no-ref-high-z:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable this flag if the ref-supply requires Reference Input High-Z Mode
+      to be disabled for proper operation.
+
+  cnv-gpios:
+    description: The Convert Input (CNV). If omitted, CNV is tied to SPI CS.
+    maxItems: 1
+
+  reset-gpios:
+    description: The Reset Input (RESET). Should be configured GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description:
+          Signal coming from the BSY_ALT_GP0 or GP3 pin that indicates a busy
+          condition.
+      - description:
+          Signal coming from the BSY_ALT_GP0 or GP2 pin that indicates an alert
+          condition.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: busy
+      - const: alert
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is the GPn number: 0 to 3.
+      The second cell takes standard GPIO flags.
+
+  "#address-cells":
+    const: 1
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^channel@[0-9a-f]$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+    description:
+      Describes each individual channel. In addition the properties defined
+      below, bipolar from adc.yaml is also supported.
+
+    properties:
+      reg:
+        maximum: 15
+        description: Input pin number (INx).
+
+      adi,pin-pairing:
+        description: |
+          The input pin pairing for the negative input. This can be:
+          - REFGND, normally 0V (single-ended)
+          - COM, normally V_REF/2, see com-supply (pseudo-differential)
+          - For even numbered pins, the next odd numbered pin (differential)
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [refgnd, com, next]
+        default: refgnd
+
+      adi,no-high-z:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: |
+          Enable this flag if the input pin requires the Analog Input High-Z
+          Mode to be disabled for proper operation.
+
+    required:
+      - reg
+
+    allOf:
+      # only even number pins can be paired with the next pin
+      - if:
+          properties:
+            reg:
+              not:
+                multipleOf: 2
+        then:
+          properties:
+            adi,pin-pairing:
+              enum: [refgnd, com]
+      # bipolar mode is not supported with REFGND pairing
+      - if:
+          not:
+            required:
+              - adi,pin-pairing
+        then:
+          properties:
+            bipolar: false
+        else:
+          if:
+            properties:
+              adi,pin-pairing:
+                const: refgnd
+          then:
+            properties:
+              bipolar: false
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vio-supply
+
+allOf:
+  - oneOf:
+      - required:
+          - ref-supply
+      - required:
+          - refin-supply
+
+  - oneOf:
+      - required:
+          - ldo-in-supply
+      - required:
+          - vdd-supply
+
+  # LFSCP package has fewer pins, so a few things are not valid in that case
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              pattern: -wlcsp$
+    then:
+      properties:
+        refin-supply: false
+        spi-rx-bus-width:
+          maximum: 2
+
+  # the internal reference buffer always requires high-z mode
+  - if:
+      required:
+        - refin-supply
+    then:
+      properties:
+        adi,no-ref-high-z: false
+
+  # limit channels for 8-channel chips
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad4697
+    then:
+      patternProperties:
+        "^channel@[0-7]$":
+          properties:
+            reg:
+              maximum: 7
+        "^channel@[8-9a-f]$": false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4695";
+            reg = <0>;
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <80000000>;
+            avdd-supply = <&supply_2_5V>;
+            vdd-supply = <&supply_1_8V>;
+            vio-supply = <&supply_1_2V>;
+            ref-supply = <&supply_5V>;
+            reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* Differential channel between IN0 and IN1. */
+            channel@0 {
+                reg = <0>;
+                adi,pin-pairing = "next";
+                bipolar;
+            };
+
+            /* Single-ended channel between IN2 and REFGND. */
+            channel@2 {
+                reg = <2>;
+            };
+
+            /* Pseudo-differential channel between IN3 and COM. */
+            channel@f {
+                reg = <3>;
+                adi,pin-pairing = "com";
+                bipolar;
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index c870bc6b8d63..8d15e4089d7c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1209,6 +1209,15 @@ F:	Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
 F:	drivers/iio/adc/ad4130.c
 
+ANALOG DEVICES INC AD4695 DRIVER
+M:	Michael Hennerich <michael.hennerich@analog.com>
+M:	Nuno Sá <nuno.sa@analog.com>
+R:	David Lechner <dlechner@baylibre.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml
+
 ANALOG DEVICES INC AD7091R DRIVER
 M:	Marcelo Schmitt <marcelo.schmitt@analog.com>
 L:	linux-iio@vger.kernel.org
