| Message ID | 20240702-add-tyhx-hx9023s-sensor-driver-v9-2-c030f1801d9b@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | iio: proximity: Add TYHX HX9023S sensor driver | expand |
On Tue, 02 Jul 2024 22:12:33 +0800, Yasin Lee wrote: > A capacitive proximity sensor > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com> > --- > .../bindings/iio/proximity/tyhx,hx9023s.yaml | 93 ++++++++++++++++++++++ > 1 file changed, 93 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@0: Unevaluated properties are not allowed ('single-channel' was unexpected) from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@1: Unevaluated properties are not allowed ('single-channel' was unexpected) from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@2: Unevaluated properties are not allowed ('single-channel' was unexpected) from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240702-add-tyhx-hx9023s-sensor-driver-v9-2-c030f1801d9b@gmail.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml new file mode 100644 index 000000000000..64ce8bc8bd36 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TYHX HX9023S capacitive proximity sensor + +maintainers: + - Yasin Lee <yasin.lee.x@gmail.com> + +description: | + TYHX HX9023S proximity sensor. Datasheet can be found here: + http://www.tianyihexin.com/ueditor/php/upload/file/20240614/1718336303992081.pdf + +properties: + compatible: + const: tyhx,hx9023s + + reg: + maxItems: 1 + + interrupts: + description: + Generated by device to announce preceding read request has finished + and data is available or that a close/far proximity event has happened. + maxItems: 1 + + vdd-supply: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@[0-4]$": + $ref: /schemas/iio/adc/adc.yaml + type: object + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 4 + description: The channel number. + +required: + - compatible + - reg + - vdd-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + proximity@2a { + compatible = "tyhx,hx9023s"; + reg = <0x2a>; + interrupt-parent = <&pio>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pp1800_prox>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + single-channel = <0>; + }; + channel@1 { + reg = <1>; + single-channel = <1>; + }; + channel@2 { + reg = <2>; + single-channel = <2>; + }; + channel@3 { + reg = <3>; + diff-channels = <1 0>; + }; + channel@4 { + reg = <4>; + diff-channels = <2 0>; + }; + }; + };