@@ -105,6 +105,8 @@
#define AD9467_REG_VREF_MASK 0x0F
#define AD9647_MAX_TEST_POINTS 32
+#define AD9467_CAN_INVERT(st) \
+ (!(st)->info->has_dco || (st)->info->has_dco_invert)
struct ad9467_chip_info {
const char *name;
@@ -117,8 +119,11 @@ struct ad9467_chip_info {
unsigned int default_output_mode;
unsigned int vref_mask;
unsigned int num_lanes;
+ unsigned int dco_en;
+ unsigned int test_points;
/* data clock output */
bool has_dco;
+ bool has_dco_invert;
};
struct ad9467_state {
@@ -138,6 +143,8 @@ struct ad9467_state {
* at the io delay control section.
*/
DECLARE_BITMAP(calib_map, AD9647_MAX_TEST_POINTS * 2);
+ /* number of bits of the map */
+ unsigned int calib_map_size;
struct gpio_desc *pwrdown_gpio;
/* ensure consistent state obtained on multiple related accesses */
struct mutex lock;
@@ -256,6 +263,7 @@ static const struct ad9467_chip_info ad9467_chip_tbl = {
.num_scales = ARRAY_SIZE(ad9467_scale_table),
.channels = ad9467_channels,
.num_channels = ARRAY_SIZE(ad9467_channels),
+ .test_points = AD9647_MAX_TEST_POINTS,
.default_output_mode = AD9467_DEF_OUTPUT_MODE,
.vref_mask = AD9467_REG_VREF_MASK,
.num_lanes = 8,
@@ -269,6 +277,7 @@ static const struct ad9467_chip_info ad9434_chip_tbl = {
.num_scales = ARRAY_SIZE(ad9434_scale_table),
.channels = ad9434_channels,
.num_channels = ARRAY_SIZE(ad9434_channels),
+ .test_points = AD9647_MAX_TEST_POINTS,
.default_output_mode = AD9434_DEF_OUTPUT_MODE,
.vref_mask = AD9434_REG_VREF_MASK,
.num_lanes = 6,
@@ -282,9 +291,11 @@ static const struct ad9467_chip_info ad9265_chip_tbl = {
.num_scales = ARRAY_SIZE(ad9265_scale_table),
.channels = ad9467_channels,
.num_channels = ARRAY_SIZE(ad9467_channels),
+ .test_points = AD9647_MAX_TEST_POINTS,
.default_output_mode = AD9265_DEF_OUTPUT_MODE,
.vref_mask = AD9265_REG_VREF_MASK,
.has_dco = true,
+ .has_dco_invert = true,
};
static int ad9467_get_scale(struct ad9467_state *st, int *val, int *val2)
@@ -468,7 +479,7 @@ static int ad9467_calibrate_apply(struct ad9467_state *st, unsigned int val)
if (st->info->has_dco) {
ret = ad9467_spi_write(st, AN877_ADC_REG_OUTPUT_DELAY,
- val);
+ val | st->info->dco_en);
if (ret)
return ret;
@@ -524,14 +535,14 @@ static int ad9467_calibrate(struct ad9467_state *st)
* Half of the bitmap is for the inverted signal. The number of test
* points is the same though...
*/
- unsigned int test_points = AD9647_MAX_TEST_POINTS;
+ unsigned int test_points = st->info->test_points;
unsigned long sample_rate = clk_get_rate(st->clk);
struct device *dev = &st->spi->dev;
bool invert = false, stat;
int ret;
/* all points invalid */
- bitmap_fill(st->calib_map, BITS_PER_TYPE(st->calib_map));
+ bitmap_fill(st->calib_map, st->calib_map_size);
ret = ad9647_calibrate_prepare(st);
if (ret)
@@ -541,7 +552,7 @@ static int ad9467_calibrate(struct ad9467_state *st)
if (ret)
return ret;
- for (point = 0; point < test_points; point++) {
+ for (point = 0; point < st->info->test_points; point++) {
ret = ad9467_calibrate_apply(st, point);
if (ret)
return ret;
@@ -576,8 +587,13 @@ static int ad9467_calibrate(struct ad9467_state *st)
* a row.
*/
if (cnt < 3) {
- invert = true;
- goto retune;
+ if (AD9467_CAN_INVERT(st)) {
+ invert = true;
+ goto retune;
+ }
+
+ if (!cnt)
+ return -EIO;
}
} else {
inv_cnt = ad9467_find_optimal_point(st->calib_map, test_points,
@@ -802,7 +818,7 @@ static ssize_t ad9467_dump_calib_table(struct file *file,
size_t count, loff_t *ppos)
{
struct ad9467_state *st = file->private_data;
- unsigned int bit, size = BITS_PER_TYPE(st->calib_map);
+ unsigned int bit;
/* +2 for the newline and +1 for the string termination */
unsigned char map[AD9647_MAX_TEST_POINTS * 2 + 3];
ssize_t len = 0;
@@ -811,8 +827,8 @@ static ssize_t ad9467_dump_calib_table(struct file *file,
if (*ppos)
goto out_read;
- for (bit = 0; bit < size; bit++) {
- if (bit == size / 2)
+ for (bit = 0; bit < st->calib_map_size; bit++) {
+ if (AD9467_CAN_INVERT(st) && bit == st->calib_map_size / 2)
len += scnprintf(map + len, sizeof(map) - len, "\n");
len += scnprintf(map + len, sizeof(map) - len, "%c",
@@ -861,6 +877,10 @@ static int ad9467_probe(struct spi_device *spi)
if (!st->info)
return -ENODEV;
+ st->calib_map_size = st->info->test_points;
+ if (AD9467_CAN_INVERT(st))
+ st->calib_map_size *= 2;
+
st->clk = devm_clk_get_enabled(&spi->dev, "adc-clk");
if (IS_ERR(st->clk))
return PTR_ERR(st->clk);
Add new variables to the per chip info structure: * test_points: Number of valid test points for calibration; * has_dco_invert: Supports inverting DCO (Data clock output) polarity; * dco_en: Specicic mask to enable DCO delays. This is in preparation for supporting new parts with subtle differences in how to configure the hardware. Note that with the new test_points variable, we also add a new calib_map_size to 'struct ad9467_state' so we know our map size depending on how many test points we have and if we can run the calibration in the inverted state or not. Signed-off-by: Nuno Sa <nuno.sa@analog.com> --- drivers/iio/adc/ad9467.c | 38 +++++++++++++++++++++++++++++--------- 1 file changed, 29 insertions(+), 9 deletions(-)