@@ -231,14 +231,14 @@ static void __ad9467_get_scale(struct ad9467_state *st, int index,
*val2 = tmp % 1000000;
}
-#define AD9467_CHAN(_chan, _si, _bits, _sign) \
+#define AD9467_CHAN(_chan, avai_mask, _si, _bits, _sign) \
{ \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.channel = _chan, \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
- .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_type_available = avai_mask, \
.scan_index = _si, \
.scan_type = { \
.sign = _sign, \
@@ -248,11 +248,11 @@ static void __ad9467_get_scale(struct ad9467_state *st, int index,
}
static const struct iio_chan_spec ad9434_channels[] = {
- AD9467_CHAN(0, 0, 12, 's'),
+ AD9467_CHAN(0, BIT(IIO_CHAN_INFO_SCALE), 0, 12, 's'),
};
static const struct iio_chan_spec ad9467_channels[] = {
- AD9467_CHAN(0, 0, 16, 's'),
+ AD9467_CHAN(0, BIT(IIO_CHAN_INFO_SCALE), 0, 16, 's'),
};
static const struct ad9467_chip_info ad9467_chip_tbl = {
@@ -301,9 +301,13 @@ static const struct ad9467_chip_info ad9265_chip_tbl = {
static int ad9467_get_scale(struct ad9467_state *st, int *val, int *val2)
{
const struct ad9467_chip_info *info = st->info;
- unsigned int i, vref_val;
+ unsigned int i = 0, vref_val;
int ret;
+ /* nothing to read if we only have one possible scale */
+ if (info->num_scales == 1)
+ goto out_get_scale;
+
ret = ad9467_spi_read(st, AN877_ADC_REG_VREF);
if (ret < 0)
return ret;
@@ -318,6 +322,7 @@ static int ad9467_get_scale(struct ad9467_state *st, int *val, int *val2)
if (i == info->num_scales)
return -ERANGE;
+out_get_scale:
__ad9467_get_scale(st, i, val, val2);
return IIO_VAL_INT_PLUS_MICRO;
@@ -332,6 +337,8 @@ static int ad9467_set_scale(struct ad9467_state *st, int val, int val2)
if (val != 0)
return -EINVAL;
+ if (info->num_scales == 1)
+ return -EOPNOTSUPP;
for (i = 0; i < info->num_scales; i++) {
__ad9467_get_scale(st, i, &scale_val[0], &scale_val[1]);
@@ -730,7 +737,7 @@ static int ad9467_update_scan_mode(struct iio_dev *indio_dev,
return 0;
}
-static const struct iio_info ad9467_info = {
+static struct iio_info ad9467_info = {
.read_raw = ad9467_read_raw,
.write_raw = ad9467_write_raw,
.update_scan_mode = ad9467_update_scan_mode,
@@ -905,6 +912,8 @@ static int ad9467_probe(struct spi_device *spi)
return -ENODEV;
}
+ if (st->info->num_scales > 1)
+ ad9467_info.read_avail = ad9467_read_avail;
indio_dev->name = st->info->name;
indio_dev->channels = st->info->channels;
indio_dev->num_channels = st->info->num_channels;
If there's only one possible scale, there's no way to change the Vref select in the device so avoid reading the register in ad9467_get_scale(). In this case, it makes no sense to provide the .read_available() callback nor allowing for writing the scale attribute. Note this is in preparation for supporting a new device that only has one possible scale. Signed-off-by: Nuno Sa <nuno.sa@analog.com> --- drivers/iio/adc/ad9467.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)