Message ID | 20240705-cleanup-h-iio-v1-5-77114c7e84c5@linaro.org (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
Series | iio: adc: simplify with cleanup.h | expand |
On Fri, Jul 05, 2024 at 12:40:48PM +0200, Krzysztof Kozlowski wrote: > Allocate the memory with scoped/cleanup.h to reduce error handling and > make the code a bit simpler. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Thank you! > --- > drivers/iio/adc/ti-tsc2046.c | 29 ++++++++++++----------------- > 1 file changed, 12 insertions(+), 17 deletions(-) > > diff --git a/drivers/iio/adc/ti-tsc2046.c b/drivers/iio/adc/ti-tsc2046.c > index edcef8f11522..24b1d4390872 100644 > --- a/drivers/iio/adc/ti-tsc2046.c > +++ b/drivers/iio/adc/ti-tsc2046.c > @@ -6,6 +6,7 @@ > */ > > #include <linux/bitfield.h> > +#include <linux/cleanup.h> > #include <linux/delay.h> > #include <linux/module.h> > #include <linux/regulator/consumer.h> > @@ -273,7 +274,6 @@ static int tsc2046_adc_read_one(struct tsc2046_adc_priv *priv, int ch_idx, > u32 *effective_speed_hz) > { > struct tsc2046_adc_ch_cfg *ch = &priv->ch_cfg[ch_idx]; > - struct tsc2046_adc_atom *rx_buf, *tx_buf; > unsigned int val, val_normalized = 0; > int ret, i, count_skip = 0, max_count; > struct spi_transfer xfer; > @@ -287,18 +287,20 @@ static int tsc2046_adc_read_one(struct tsc2046_adc_priv *priv, int ch_idx, > max_count = 1; > } > > - if (sizeof(*tx_buf) * max_count > PAGE_SIZE) > + if (sizeof(struct tsc2046_adc_atom) * max_count > PAGE_SIZE) > return -ENOSPC; > > - tx_buf = kcalloc(max_count, sizeof(*tx_buf), GFP_KERNEL); > + struct tsc2046_adc_atom *tx_buf __free(kfree) = kcalloc(max_count, > + sizeof(*tx_buf), > + GFP_KERNEL); > if (!tx_buf) > return -ENOMEM; > > - rx_buf = kcalloc(max_count, sizeof(*rx_buf), GFP_KERNEL); > - if (!rx_buf) { > - ret = -ENOMEM; > - goto free_tx; > - } > + struct tsc2046_adc_atom *rx_buf __free(kfree) = kcalloc(max_count, > + sizeof(*rx_buf), > + GFP_KERNEL); > + if (!rx_buf) > + return -ENOMEM; > > /* > * Do not enable automatic power down on working samples. Otherwise the > @@ -326,7 +328,7 @@ static int tsc2046_adc_read_one(struct tsc2046_adc_priv *priv, int ch_idx, > if (ret) { > dev_err_ratelimited(&priv->spi->dev, "SPI transfer failed %pe\n", > ERR_PTR(ret)); > - goto free_bufs; > + return ret; > } > > if (effective_speed_hz) > @@ -337,14 +339,7 @@ static int tsc2046_adc_read_one(struct tsc2046_adc_priv *priv, int ch_idx, > val_normalized += val; > } > > - ret = DIV_ROUND_UP(val_normalized, max_count - count_skip); > - > -free_bufs: > - kfree(rx_buf); > -free_tx: > - kfree(tx_buf); > - > - return ret; > + return DIV_ROUND_UP(val_normalized, max_count - count_skip); > } > > static size_t tsc2046_adc_group_set_layout(struct tsc2046_adc_priv *priv, > > -- > 2.43.0 > > >
diff --git a/drivers/iio/adc/ti-tsc2046.c b/drivers/iio/adc/ti-tsc2046.c index edcef8f11522..24b1d4390872 100644 --- a/drivers/iio/adc/ti-tsc2046.c +++ b/drivers/iio/adc/ti-tsc2046.c @@ -6,6 +6,7 @@ */ #include <linux/bitfield.h> +#include <linux/cleanup.h> #include <linux/delay.h> #include <linux/module.h> #include <linux/regulator/consumer.h> @@ -273,7 +274,6 @@ static int tsc2046_adc_read_one(struct tsc2046_adc_priv *priv, int ch_idx, u32 *effective_speed_hz) { struct tsc2046_adc_ch_cfg *ch = &priv->ch_cfg[ch_idx]; - struct tsc2046_adc_atom *rx_buf, *tx_buf; unsigned int val, val_normalized = 0; int ret, i, count_skip = 0, max_count; struct spi_transfer xfer; @@ -287,18 +287,20 @@ static int tsc2046_adc_read_one(struct tsc2046_adc_priv *priv, int ch_idx, max_count = 1; } - if (sizeof(*tx_buf) * max_count > PAGE_SIZE) + if (sizeof(struct tsc2046_adc_atom) * max_count > PAGE_SIZE) return -ENOSPC; - tx_buf = kcalloc(max_count, sizeof(*tx_buf), GFP_KERNEL); + struct tsc2046_adc_atom *tx_buf __free(kfree) = kcalloc(max_count, + sizeof(*tx_buf), + GFP_KERNEL); if (!tx_buf) return -ENOMEM; - rx_buf = kcalloc(max_count, sizeof(*rx_buf), GFP_KERNEL); - if (!rx_buf) { - ret = -ENOMEM; - goto free_tx; - } + struct tsc2046_adc_atom *rx_buf __free(kfree) = kcalloc(max_count, + sizeof(*rx_buf), + GFP_KERNEL); + if (!rx_buf) + return -ENOMEM; /* * Do not enable automatic power down on working samples. Otherwise the @@ -326,7 +328,7 @@ static int tsc2046_adc_read_one(struct tsc2046_adc_priv *priv, int ch_idx, if (ret) { dev_err_ratelimited(&priv->spi->dev, "SPI transfer failed %pe\n", ERR_PTR(ret)); - goto free_bufs; + return ret; } if (effective_speed_hz) @@ -337,14 +339,7 @@ static int tsc2046_adc_read_one(struct tsc2046_adc_priv *priv, int ch_idx, val_normalized += val; } - ret = DIV_ROUND_UP(val_normalized, max_count - count_skip); - -free_bufs: - kfree(rx_buf); -free_tx: - kfree(tx_buf); - - return ret; + return DIV_ROUND_UP(val_normalized, max_count - count_skip); } static size_t tsc2046_adc_group_set_layout(struct tsc2046_adc_priv *priv,
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- drivers/iio/adc/ti-tsc2046.c | 29 ++++++++++++----------------- 1 file changed, 12 insertions(+), 17 deletions(-)