@@ -86,6 +86,7 @@
struct vl6180_data {
struct i2c_client *client;
struct mutex lock;
+ struct completion completion;
unsigned int als_gain_milli;
unsigned int als_it_ms;
unsigned int als_meas_rate;
@@ -211,29 +212,38 @@ static int vl6180_write_word(struct i2c_client *client, u16 cmd, u16 val)
static int vl6180_measure(struct vl6180_data *data, int addr)
{
struct i2c_client *client = data->client;
+ unsigned long time_left;
int tries = 20, ret;
u16 value;
mutex_lock(&data->lock);
+ reinit_completion(&data->completion);
+
/* Start single shot measurement */
ret = vl6180_write_byte(client,
vl6180_chan_regs_table[addr].start_reg, VL6180_STARTSTOP);
if (ret < 0)
goto fail;
- while (tries--) {
- ret = vl6180_read_byte(client, VL6180_INTR_STATUS);
- if (ret < 0)
- goto fail;
-
- if (ret & vl6180_chan_regs_table[addr].drdy_mask)
- break;
- msleep(20);
- }
+ if (client->irq) {
+ time_left = wait_for_completion_timeout(&data->completion, HZ / 10);
+ if (time_left == 0)
+ return -ETIMEDOUT;
+ } else {
+ while (tries--) {
+ ret = vl6180_read_byte(client, VL6180_INTR_STATUS);
+ if (ret < 0)
+ goto fail;
+
+ if (ret & vl6180_chan_regs_table[addr].drdy_mask)
+ break;
+ msleep(20);
+ }
- if (tries < 0) {
- ret = -EIO;
- goto fail;
+ if (tries < 0) {
+ ret = -EIO;
+ goto fail;
+ }
}
/* Read result value from appropriate registers */
@@ -484,6 +494,15 @@ static int vl6180_write_raw(struct iio_dev *indio_dev,
}
}
+static irqreturn_t vl6180_threaded_irq(int irq, void *priv)
+{
+ struct iio_dev *indio_dev = priv;
+ struct vl6180_data *data = iio_priv(indio_dev);
+
+ complete(&data->completion);
+ return IRQ_HANDLED;
+}
+
static const struct iio_info vl6180_info = {
.read_raw = vl6180_read_raw,
.write_raw = vl6180_write_raw,
@@ -583,6 +602,17 @@ static int vl6180_probe(struct i2c_client *client)
if (ret < 0)
return ret;
+ if (client->irq) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, vl6180_threaded_irq,
+ IRQF_ONESHOT,
+ indio_dev->name, indio_dev);
+ if (ret)
+ return dev_err_probe(&client->dev, ret, "devm_request_irq error \n");
+
+ init_completion(&data->completion);
+ }
+
return devm_iio_device_register(&client->dev, indio_dev);
}
The interrupts are serviced in the `vl6180_measure` function when the irq_handler signals that the reading is complete. We now can read asynchronously if `client->irq` is set. Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com> --- drivers/iio/light/vl6180.c | 54 +++++++++++++++++++++++++++++--------- 1 file changed, 42 insertions(+), 12 deletions(-)