| Message ID | 20241014143204.30195-3-ramona.nechita@analog.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | Add support for AD777x family | expand |
On Mon, 14 Oct 2024 17:31:59 +0300 Ramona Alexandra Nechita <ramona.nechita@analog.com> wrote: > The filter mode / filter type property is used for ad4130 > and ad7779 drivers, therefore the ABI doc file for ad4130 > was removed, merging both of them in the sysfs-bus-iio. > Since one of the drivers is available from 6.1, the version > has been set to 6.1 for these attributes. > > Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com> > --- > diff --git a/MAINTAINERS b/MAINTAINERS > index 6011af70c12e..2de269df7d3a 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -1262,7 +1262,6 @@ M: Cosmin Tanislav <cosmin.tanislav@analog.com> > L: linux-iio@vger.kernel.org > S: Supported > W: https://ez.analog.com/linux-software-drivers > -F: Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 ? Spurious change. > F: Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml > F: drivers/iio/adc/ad4130.c >
On Sun, 20 Oct 2024 12:06:24 +0100 Jonathan Cameron <jic23@kernel.org> wrote: > On Mon, 14 Oct 2024 17:31:59 +0300 > Ramona Alexandra Nechita <ramona.nechita@analog.com> wrote: > > > The filter mode / filter type property is used for ad4130 > > and ad7779 drivers, therefore the ABI doc file for ad4130 > > was removed, merging both of them in the sysfs-bus-iio. > > Since one of the drivers is available from 6.1, the version > > has been set to 6.1 for these attributes. > > > > Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com> > > --- > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 6011af70c12e..2de269df7d3a 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -1262,7 +1262,6 @@ M: Cosmin Tanislav <cosmin.tanislav@analog.com> > > L: linux-iio@vger.kernel.org > > S: Supported > > W: https://ez.analog.com/linux-software-drivers > > -F: Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 > ? Spurious change. Ignore that. Change is correct I'm just being slow this morning! Jonathan > > > F: Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml > > F: drivers/iio/adc/ad4130.c > > > >
On Mon, 14 Oct 2024 17:31:59 +0300 Ramona Alexandra Nechita <ramona.nechita@analog.com> wrote: > The filter mode / filter type property is used for ad4130 > and ad7779 drivers, therefore the ABI doc file for ad4130 > was removed, merging both of them in the sysfs-bus-iio. > Since one of the drivers is available from 6.1, the version > has been set to 6.1 for these attributes. > > Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com> You didn't pick up Andy's Reviewed-by on an earlier version. Please be more careful with those in future!
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 89943c2d54e8..541b3a28c1fd 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -2268,6 +2268,28 @@ Description: An example format is 16-bytes, 2-digits-per-byte, HEX-string representing the sensor unique ID number. +What: /sys/bus/iio/devices/iio:deviceX/filter_type_available +What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_mode_available +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns a list with the possible filter modes. Options + for the attribute: + * "sinc3" - The digital sinc3 filter. Moderate 1st conversion time. + Good noise performance. + * "sinc4" - Sinc 4. Excellent noise performance. Long + 1st conversion time. + * "sinc5" - The digital sinc5 filter. Excellent noise performance + * "sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion + time. + * "sinc3+rej60" - Sinc3 + 60Hz rejection. + * "sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion + time. + * "sinc3+pf1" - Sinc3 + device specific Post Filter 1. + * "sinc3+pf2" - Sinc3 + device specific Post Filter 2. + * "sinc3+pf3" - Sinc3 + device specific Post Filter 3. + * "sinc3+pf4" - Sinc3 + device specific Post Filter 4. + What: /sys/.../events/in_proximity_thresh_either_runningperiod KernelVersion: 6.6 Contact: linux-iio@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 deleted file mode 100644 index f24ed6687e90..000000000000 --- a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 +++ /dev/null @@ -1,46 +0,0 @@ -What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_mode_available -KernelVersion: 6.2 -Contact: linux-iio@vger.kernel.org -Description: - Reading returns a list with the possible filter modes. - - * "sinc4" - Sinc 4. Excellent noise performance. Long - 1st conversion time. No natural 50/60Hz rejection. - - * "sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion - time. - - * "sinc3" - Sinc3. Moderate 1st conversion time. - Good noise performance. - - * "sinc3+rej60" - Sinc3 + 60Hz rejection. At a sampling - frequency of 50Hz, achieves simultaneous 50Hz and 60Hz - rejection. - - * "sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion - time. Best used with a sampling frequency of at least - 216.19Hz. - - * "sinc3+pf1" - Sinc3 + Post Filter 1. 53dB rejection @ - 50Hz, 58dB rejection @ 60Hz. - - * "sinc3+pf2" - Sinc3 + Post Filter 2. 70dB rejection @ - 50Hz, 70dB rejection @ 60Hz. - - * "sinc3+pf3" - Sinc3 + Post Filter 3. 99dB rejection @ - 50Hz, 103dB rejection @ 60Hz. - - * "sinc3+pf4" - Sinc3 + Post Filter 4. 103dB rejection @ - 50Hz, 109dB rejection @ 60Hz. - -What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_filter_mode -KernelVersion: 6.2 -Contact: linux-iio@vger.kernel.org -Description: - Set the filter mode of the differential channel. When the filter - mode changes, the in_voltageY-voltageZ_sampling_frequency and - in_voltageY-voltageZ_sampling_frequency_available attributes - might also change to accommodate the new filter mode. - If the current sampling frequency is out of range for the new - filter mode, the sampling frequency will be changed to the - closest valid one. diff --git a/MAINTAINERS b/MAINTAINERS index 6011af70c12e..2de269df7d3a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1262,7 +1262,6 @@ M: Cosmin Tanislav <cosmin.tanislav@analog.com> L: linux-iio@vger.kernel.org S: Supported W: https://ez.analog.com/linux-software-drivers -F: Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 F: Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml F: drivers/iio/adc/ad4130.c
The filter mode / filter type property is used for ad4130 and ad7779 drivers, therefore the ABI doc file for ad4130 was removed, merging both of them in the sysfs-bus-iio. Since one of the drivers is available from 6.1, the version has been set to 6.1 for these attributes. Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com> --- Documentation/ABI/testing/sysfs-bus-iio | 22 +++++++++ .../ABI/testing/sysfs-bus-iio-adc-ad4130 | 46 ------------------- MAINTAINERS | 1 - 3 files changed, 22 insertions(+), 47 deletions(-) delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130