@@ -95,6 +95,10 @@
#define AD7124_MAX_CONFIGS 8
#define AD7124_MAX_CHANNELS 16
+/* AD7124 input sources */
+#define AD7124_INPUT_TEMPSENSOR 16
+#define AD7124_INPUT_AVSS 17
+
enum ad7124_ids {
ID_AD7124_4,
ID_AD7124_8,
@@ -588,39 +592,75 @@ static int ad7124_read_raw(struct iio_dev *indio_dev,
return ret;
return IIO_VAL_INT;
+
case IIO_CHAN_INFO_SCALE:
- mutex_lock(&st->cfgs_lock);
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ mutex_lock(&st->cfgs_lock);
- idx = st->channels[chan->address].cfg.pga_bits;
- *val = st->channels[chan->address].cfg.vref_mv;
- if (st->channels[chan->address].cfg.bipolar)
- *val2 = chan->scan_type.realbits - 1 + idx;
- else
- *val2 = chan->scan_type.realbits + idx;
+ idx = st->channels[chan->address].cfg.pga_bits;
+ *val = st->channels[chan->address].cfg.vref_mv;
+ if (st->channels[chan->address].cfg.bipolar)
+ *val2 = chan->scan_type.realbits - 1 + idx;
+ else
+ *val2 = chan->scan_type.realbits + idx;
+
+ mutex_unlock(&st->cfgs_lock);
+ return IIO_VAL_FRACTIONAL_LOG2;
+
+ case IIO_TEMP:
+ /*
+ * According to the data sheet
+ * Temperature (°C)
+ * = ((Conversion − 0x800000)/13584) − 272.5
+ * = (Conversion − 0x800000 - 13584 * 272.5) / 13584
+ * = (Conversion − 12090248) / 13584
+ * So scale with 1000/13584 to yield °mC. Reduce by 8 to
+ * 125/1698.
+ */
+ *val = 125;
+ *val2 = 1698;
+ return IIO_VAL_FRACTIONAL;
+
+ default:
+ return -EINVAL;
+ }
- mutex_unlock(&st->cfgs_lock);
- return IIO_VAL_FRACTIONAL_LOG2;
case IIO_CHAN_INFO_OFFSET:
- mutex_lock(&st->cfgs_lock);
- if (st->channels[chan->address].cfg.bipolar)
- *val = -(1 << (chan->scan_type.realbits - 1));
- else
- *val = 0;
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ mutex_lock(&st->cfgs_lock);
+ if (st->channels[chan->address].cfg.bipolar)
+ *val = -(1 << (chan->scan_type.realbits - 1));
+ else
+ *val = 0;
+
+ mutex_unlock(&st->cfgs_lock);
+ return IIO_VAL_INT;
+
+ case IIO_TEMP:
+ /* see calculation above */
+ *val = -12090248;
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
- mutex_unlock(&st->cfgs_lock);
- return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
mutex_lock(&st->cfgs_lock);
*val = st->channels[chan->address].cfg.odr;
mutex_unlock(&st->cfgs_lock);
return IIO_VAL_INT;
+
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
mutex_lock(&st->cfgs_lock);
*val = ad7124_get_3db_filter_freq(st, chan->scan_index);
mutex_unlock(&st->cfgs_lock);
return IIO_VAL_INT;
+
default:
return -EINVAL;
}
@@ -645,6 +685,7 @@ static int ad7124_write_raw(struct iio_dev *indio_dev,
ad7124_set_channel_odr(st, chan->address, val);
break;
+
case IIO_CHAN_INFO_SCALE:
if (val != 0) {
ret = -EINVAL;
@@ -666,6 +707,7 @@ static int ad7124_write_raw(struct iio_dev *indio_dev,
st->channels[chan->address].cfg.pga_bits = res;
break;
+
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
if (val2 != 0) {
ret = -EINVAL;
@@ -825,11 +867,10 @@ static int ad7124_parse_channel_config(struct iio_dev *indio_dev,
struct ad7124_channel *channels;
struct iio_chan_spec *chan;
unsigned int ain[2], channel = 0, tmp;
+ unsigned int num_channels;
int ret;
- st->num_channels = device_get_child_node_count(dev);
- if (!st->num_channels)
- return dev_err_probe(dev, -ENODEV, "no channel children\n");
+ num_channels = device_get_child_node_count(dev);
/*
* The driver assigns each logical channel defined in the device tree
@@ -838,9 +879,12 @@ static int ad7124_parse_channel_config(struct iio_dev *indio_dev,
* CHANNEL_15) as an additional channel register. The driver could be
* improved to lift this limitation.
*/
- if (st->num_channels > AD7124_MAX_CHANNELS)
+ if (num_channels > AD7124_MAX_CHANNELS)
return dev_err_probe(dev, -EINVAL, "Too many channels defined\n");
+ /* Add one for temperature */
+ st->num_channels = min(num_channels + 1, AD7124_MAX_CHANNELS);
+
chan = devm_kcalloc(indio_dev->dev.parent, st->num_channels,
sizeof(*chan), GFP_KERNEL);
if (!chan)
@@ -861,7 +905,7 @@ static int ad7124_parse_channel_config(struct iio_dev *indio_dev,
return dev_err_probe(dev, ret,
"Failed to parse reg property of %pfwP\n", child);
- if (channel >= indio_dev->num_channels)
+ if (channel >= num_channels)
return dev_err_probe(dev, -EINVAL,
"Channel index >= number of channels in %pfwP\n", child);
@@ -901,6 +945,32 @@ static int ad7124_parse_channel_config(struct iio_dev *indio_dev,
chan[channel].channel2 = ain[1];
}
+ if (num_channels < AD7124_MAX_CHANNELS) {
+ st->channels[num_channels] = (struct ad7124_channel) {
+ .nr = num_channels,
+ .ain = AD7124_CHANNEL_AINP(AD7124_INPUT_TEMPSENSOR) |
+ AD7124_CHANNEL_AINM(AD7124_INPUT_AVSS),
+ .cfg = {
+ .bipolar = true,
+ },
+ };
+
+ chan[num_channels] = (struct iio_chan_spec) {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 24,
+ .storagebits = 32,
+ .endianness = IIO_BE,
+ },
+ .address = num_channels,
+ .scan_index = num_channels,
+ };
+ };
+
return 0;
}
If the maximal count of channels the driver supports isn't fully utilized, add an attribute providing the internal temperature. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> --- drivers/iio/adc/ad7124.c | 112 +++++++++++++++++++++++++++++++-------- 1 file changed, 91 insertions(+), 21 deletions(-)