diff mbox series

[v2] iio: dac: ad3552r: clear reset status flag

Message ID 20250125-wip-bl-ad3552r-clear-reset-v2-1-aa3a27f3ff8c@baylibre.com (mailing list archive)
State New
Headers show
Series [v2] iio: dac: ad3552r: clear reset status flag | expand

Commit Message

Angelo Dureghello Jan. 25, 2025, 4:24 p.m. UTC 
From: Angelo Dureghello <adureghello@baylibre.com>

Clear reset status flag, to keep error status register clean after reset
(ad3552r manual, rev B table 38).

Reset error flag was left to 1, so debugging registers, the "Error
Status Register" was dirty (0x01). It is important to clear this bit, so
if there is any reset event over normal working mode, it is possible to
detect it.

Fixes: 8f2b54824b28 ("drivers:iio:dac: Add AD3552R driver support")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
---
 drivers/iio/dac/ad3552r.c | 6 ++++++
 1 file changed, 6 insertions(+)


---
base-commit: 0e5dc6cf754b65ee7f945a100ee2984a1c591239
change-id: 20250125-wip-bl-ad3552r-clear-reset-12aba63a08e9

Best regards,
diff mbox series

Patch

diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
index 9d28e06b80c0..a44b163f3183 100644
--- a/drivers/iio/dac/ad3552r.c
+++ b/drivers/iio/dac/ad3552r.c
@@ -410,6 +410,12 @@  static int ad3552r_reset(struct ad3552r_desc *dac)
 		return ret;
 	}
 
+	/* Clear reset error flag, see ad3552r manual, rev B table 38. */
+	ret = ad3552r_write_reg(dac, AD3552R_REG_ADDR_ERR_STATUS,
+				AD3552R_MASK_RESET_STATUS);
+	if (ret)
+		return ret;
+
 	return ad3552r_update_reg_field(dac,
 					AD3552R_REG_ADDR_INTERFACE_CONFIG_A,
 					AD3552R_MASK_ADDR_ASCENSION,