diff mbox series

[v2,2/3] iio: Add event enums for running period and count

Message ID 206111caec7e4a8ae0e7628fb49b9ac295097177.1689174736.git.waqar.hameed@axis.com (mailing list archive)
State Changes Requested
Headers show
Series Add driver for Murata IRS-D200 | expand

Commit Message

Waqar Hameed July 12, 2023, 3:12 p.m. UTC 
There are devices (such as Murata IRS-D200 PIR proximity sensor) that
check the data signal with a running period. I.e. for a specified time,
they count the number of conditions that have occurred, and then signal
if that is more than a specified amount.

`IIO_EV_INFO_PERIOD` resets when the condition no longer is true and is
therefore not suitable for these devices. Add a new `iio_event_info`
`IIO_EV_INFO_RUNNING_PERIOD` that can be used as a running period. Also
add a new `IIO_EV_INFO_RUNNING_COUNT` that can be used to specify the
number of conditions that must occur during this running period.

Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
 Documentation/ABI/testing/sysfs-bus-iio | 16 ++++++++++++++++
 drivers/iio/industrialio-event.c        |  2 ++
 include/linux/iio/types.h               |  2 ++
 3 files changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 7140e8e7313f..a2854dc9a839 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -2163,3 +2163,19 @@  Contact:	linux-iio@vger.kernel.org
 Description:
 		An example format is 16-bytes, 2-digits-per-byte, HEX-string
 		representing the sensor unique ID number.
+
+What:		/sys/.../events/in_proximity_thresh_either_runningperiod
+KernelVersion:	6.6
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A running period of time (in seconds) for which
+		in_proximity_thresh_either_runningcount amount of conditions
+		must occur before an event is generated. If direction is not
+		specified then this period applies to both directions.
+
+What:		/sys/.../events/in_proximity_thresh_either_runningcount
+KernelVersion:	6.6
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Number of conditions that must occur, during a running
+		period, before an event is generated.
diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
index f77ce49d4c36..19f7a91157ee 100644
--- a/drivers/iio/industrialio-event.c
+++ b/drivers/iio/industrialio-event.c
@@ -252,6 +252,8 @@  static const char * const iio_ev_info_text[] = {
 	[IIO_EV_INFO_TIMEOUT] = "timeout",
 	[IIO_EV_INFO_RESET_TIMEOUT] = "reset_timeout",
 	[IIO_EV_INFO_TAP2_MIN_DELAY] = "tap2_min_delay",
+	[IIO_EV_INFO_RUNNING_PERIOD] = "runningperiod",
+	[IIO_EV_INFO_RUNNING_COUNT] = "runningcount",
 };
 
 static enum iio_event_direction iio_ev_attr_dir(struct iio_dev_attr *attr)
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
index 82faa98c719a..117bde7d6ad7 100644
--- a/include/linux/iio/types.h
+++ b/include/linux/iio/types.h
@@ -19,6 +19,8 @@  enum iio_event_info {
 	IIO_EV_INFO_TIMEOUT,
 	IIO_EV_INFO_RESET_TIMEOUT,
 	IIO_EV_INFO_TAP2_MIN_DELAY,
+	IIO_EV_INFO_RUNNING_PERIOD,
+	IIO_EV_INFO_RUNNING_COUNT,
 };
 
 #define IIO_VAL_INT 1