@@ -205,26 +205,21 @@ struct st_lsm6dsx_ext_dev_settings {
/**
* struct st_lsm6dsx_settings - ST IMU sensor settings
* @wai: Sensor WhoAmI default value.
- * @int1_addr: Control Register address for INT1
- * @int2_addr: Control Register address for INT2
* @reset_addr: register address for reset/reboot
* @max_fifo_size: Sensor max fifo length in FIFO words.
* @id: List of hw id/device name supported by the driver configuration.
* @channels: IIO channels supported by the device.
+ * @irq_config: interrupts related registers.
* @odr_table: Hw sensors odr table (Hz + val).
* @fs_table: Hw sensors gain table (gain + val).
* @decimator: List of decimator register info (addr + mask).
* @batch: List of FIFO batching register info (addr + mask).
- * @lir: Latched interrupt register info (addr + mask).
- * @clear_on_read: Clear on read register info (addr + mask).
* @fifo_ops: Sensor hw FIFO parameters.
* @ts_settings: Hw timer related settings.
* @shub_settings: i2c controller related settings.
*/
struct st_lsm6dsx_settings {
u8 wai;
- u8 int1_addr;
- u8 int2_addr;
u8 reset_addr;
u16 max_fifo_size;
struct {
@@ -235,12 +230,16 @@ struct st_lsm6dsx_settings {
const struct iio_chan_spec *chan;
int len;
} channels[2];
+ struct {
+ struct st_lsm6dsx_reg irq1;
+ struct st_lsm6dsx_reg irq2;
+ struct st_lsm6dsx_reg lir;
+ struct st_lsm6dsx_reg clear_on_read;
+ } irq_config;
struct st_lsm6dsx_odr_table_entry odr_table[2];
struct st_lsm6dsx_fs_table_entry fs_table[2];
struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
- struct st_lsm6dsx_reg lir;
- struct st_lsm6dsx_reg clear_on_read;
struct st_lsm6dsx_fifo_ops fifo_ops;
struct st_lsm6dsx_hw_ts_settings ts_settings;
struct st_lsm6dsx_shub_settings shub_settings;
@@ -58,7 +58,6 @@
#include "st_lsm6dsx.h"
-#define ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK BIT(3)
#define ST_LSM6DSX_REG_WHOAMI_ADDR 0x0f
#define ST_LSM6DSX_REG_RESET_MASK BIT(0)
#define ST_LSM6DSX_REG_BOOT_MASK BIT(7)
@@ -89,8 +88,6 @@ static const struct iio_chan_spec st_lsm6ds0_gyro_channels[] = {
static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
{
.wai = 0x68,
- .int1_addr = 0x0c,
- .int2_addr = 0x0d,
.reset_addr = 0x22,
.max_fifo_size = 32,
.id = {
@@ -156,11 +153,19 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[2] = { IIO_DEGREE_TO_RAD(2000), 0x3 },
},
},
+ .irq_config = {
+ .irq1 = {
+ .addr = 0x0c,
+ .mask = BIT(3),
+ },
+ .irq2 = {
+ .addr = 0x0d,
+ .mask = BIT(3),
+ },
+ },
},
{
.wai = 0x69,
- .int1_addr = 0x0d,
- .int2_addr = 0x0e,
.reset_addr = 0x12,
.max_fifo_size = 1365,
.id = {
@@ -227,6 +232,20 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
},
},
+ .irq_config = {
+ .irq1 = {
+ .addr = 0x0d,
+ .mask = BIT(3),
+ },
+ .irq2 = {
+ .addr = 0x0e,
+ .mask = BIT(3),
+ },
+ .lir = {
+ .addr = 0x58,
+ .mask = BIT(0),
+ },
+ },
.decimator = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x08,
@@ -237,10 +256,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.mask = GENMASK(5, 3),
},
},
- .lir = {
- .addr = 0x58,
- .mask = BIT(0),
- },
.fifo_ops = {
.update_fifo = st_lsm6dsx_update_fifo,
.read_fifo = st_lsm6dsx_read_fifo,
@@ -275,8 +290,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x69,
- .int1_addr = 0x0d,
- .int2_addr = 0x0e,
.reset_addr = 0x12,
.max_fifo_size = 682,
.id = {
@@ -343,6 +356,20 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
},
},
+ .irq_config = {
+ .irq1 = {
+ .addr = 0x0d,
+ .mask = BIT(3),
+ },
+ .irq2 = {
+ .addr = 0x0e,
+ .mask = BIT(3),
+ },
+ .lir = {
+ .addr = 0x58,
+ .mask = BIT(0),
+ },
+ },
.decimator = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x08,
@@ -353,10 +380,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.mask = GENMASK(5, 3),
},
},
- .lir = {
- .addr = 0x58,
- .mask = BIT(0),
- },
.fifo_ops = {
.update_fifo = st_lsm6dsx_update_fifo,
.read_fifo = st_lsm6dsx_read_fifo,
@@ -391,8 +414,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6a,
- .int1_addr = 0x0d,
- .int2_addr = 0x0e,
.reset_addr = 0x12,
.max_fifo_size = 682,
.id = {
@@ -468,6 +489,20 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
},
},
+ .irq_config = {
+ .irq1 = {
+ .addr = 0x0d,
+ .mask = BIT(3),
+ },
+ .irq2 = {
+ .addr = 0x0e,
+ .mask = BIT(3),
+ },
+ .lir = {
+ .addr = 0x58,
+ .mask = BIT(0),
+ },
+ },
.decimator = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x08,
@@ -478,10 +513,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.mask = GENMASK(5, 3),
},
},
- .lir = {
- .addr = 0x58,
- .mask = BIT(0),
- },
.fifo_ops = {
.update_fifo = st_lsm6dsx_update_fifo,
.read_fifo = st_lsm6dsx_read_fifo,
@@ -516,8 +547,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6c,
- .int1_addr = 0x0d,
- .int2_addr = 0x0e,
.reset_addr = 0x12,
.max_fifo_size = 512,
.id = {
@@ -587,6 +616,24 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
},
},
+ .irq_config = {
+ .irq1 = {
+ .addr = 0x0d,
+ .mask = BIT(3),
+ },
+ .irq2 = {
+ .addr = 0x0e,
+ .mask = BIT(3),
+ },
+ .lir = {
+ .addr = 0x56,
+ .mask = BIT(0),
+ },
+ .clear_on_read = {
+ .addr = 0x56,
+ .mask = BIT(6),
+ },
+ },
.batch = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x09,
@@ -597,14 +644,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.mask = GENMASK(7, 4),
},
},
- .lir = {
- .addr = 0x56,
- .mask = BIT(0),
- },
- .clear_on_read = {
- .addr = 0x56,
- .mask = BIT(6),
- },
.fifo_ops = {
.update_fifo = st_lsm6dsx_update_fifo,
.read_fifo = st_lsm6dsx_read_tagged_fifo,
@@ -657,8 +696,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6b,
- .int1_addr = 0x0d,
- .int2_addr = 0x0e,
.reset_addr = 0x12,
.max_fifo_size = 512,
.id = {
@@ -725,6 +762,24 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
},
},
+ .irq_config = {
+ .irq1 = {
+ .addr = 0x0d,
+ .mask = BIT(3),
+ },
+ .irq2 = {
+ .addr = 0x0e,
+ .mask = BIT(3),
+ },
+ .lir = {
+ .addr = 0x56,
+ .mask = BIT(0),
+ },
+ .clear_on_read = {
+ .addr = 0x56,
+ .mask = BIT(6),
+ },
+ },
.batch = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x09,
@@ -735,14 +790,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.mask = GENMASK(7, 4),
},
},
- .lir = {
- .addr = 0x56,
- .mask = BIT(0),
- },
- .clear_on_read = {
- .addr = 0x56,
- .mask = BIT(6),
- },
.fifo_ops = {
.update_fifo = st_lsm6dsx_update_fifo,
.read_fifo = st_lsm6dsx_read_tagged_fifo,
@@ -769,8 +816,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6b,
- .int1_addr = 0x0d,
- .int2_addr = 0x0e,
.reset_addr = 0x12,
.max_fifo_size = 512,
.id = {
@@ -840,6 +885,24 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
},
},
+ .irq_config = {
+ .irq1 = {
+ .addr = 0x0d,
+ .mask = BIT(3),
+ },
+ .irq2 = {
+ .addr = 0x0e,
+ .mask = BIT(3),
+ },
+ .lir = {
+ .addr = 0x56,
+ .mask = BIT(0),
+ },
+ .clear_on_read = {
+ .addr = 0x56,
+ .mask = BIT(6),
+ },
+ },
.batch = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x09,
@@ -850,14 +913,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.mask = GENMASK(7, 4),
},
},
- .lir = {
- .addr = 0x56,
- .mask = BIT(0),
- },
- .clear_on_read = {
- .addr = 0x56,
- .mask = BIT(6),
- },
.fifo_ops = {
.update_fifo = st_lsm6dsx_update_fifo,
.read_fifo = st_lsm6dsx_read_tagged_fifo,
@@ -1299,7 +1354,9 @@ static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
return of_property_read_u32(np, "st,drdy-int-pin", drdy_pin);
}
-static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
+static int
+st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw,
+ const struct st_lsm6dsx_reg **drdy_reg)
{
int err = 0, drdy_pin;
@@ -1313,10 +1370,10 @@ static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
switch (drdy_pin) {
case 1:
- *drdy_reg = hw->settings->int1_addr;
+ *drdy_reg = &hw->settings->irq_config.irq1;
break;
case 2:
- *drdy_reg = hw->settings->int2_addr;
+ *drdy_reg = &hw->settings->irq_config.irq2;
break;
default:
dev_err(hw->dev, "unsupported data ready pin\n");
@@ -1412,7 +1469,7 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
{
- u8 drdy_int_reg;
+ const struct st_lsm6dsx_reg *reg;
int err;
/* device sw reset */
@@ -1441,35 +1498,29 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
return err;
/* enable FIFO watermak interrupt */
- err = st_lsm6dsx_get_drdy_reg(hw, &drdy_int_reg);
+ err = st_lsm6dsx_get_drdy_reg(hw, ®);
if (err < 0)
return err;
- err = regmap_update_bits(hw->regmap, drdy_int_reg,
- ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK,
- FIELD_PREP(ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK,
- 1));
+ err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+ ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
if (err < 0)
return err;
/* enable Latched interrupts for device events */
- if (hw->settings->lir.addr) {
- unsigned int data;
-
- data = ST_LSM6DSX_SHIFT_VAL(1, hw->settings->lir.mask);
- err = regmap_update_bits(hw->regmap, hw->settings->lir.addr,
- hw->settings->lir.mask, data);
+ if (hw->settings->irq_config.lir.addr) {
+ reg = &hw->settings->irq_config.lir;
+ err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+ ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
if (err < 0)
return err;
/* enable clear on read for latched interrupts */
- if (hw->settings->clear_on_read.addr) {
- data = ST_LSM6DSX_SHIFT_VAL(1,
- hw->settings->clear_on_read.mask);
+ if (hw->settings->irq_config.clear_on_read.addr) {
+ reg = &hw->settings->irq_config.clear_on_read;
err = regmap_update_bits(hw->regmap,
- hw->settings->clear_on_read.addr,
- hw->settings->clear_on_read.mask,
- data);
+ reg->addr, reg->mask,
+ ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
if (err < 0)
return err;
}
Group irq related definition in irq_config structure in st_lsm6dsx_settings. This is a preliminary patch to check OpenDrain/Active low registers before accessing them Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 15 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 195 ++++++++++++------- 2 files changed, 130 insertions(+), 80 deletions(-)