Message ID | 55683f1c690d0d750526eeb10e72abecf452401c.1576341963.git.lorenzo@kernel.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | introduce i2c master controller support for LSM6DSM | expand |
On Sat, 14 Dec 2019 17:52:57 +0100 Lorenzo Bianconi <lorenzo@kernel.org> wrote: > Check if the sensor hub output register is located in the primary or in the > secondary memory page. This is a preliminary patch to support i2c master > controller on lsm6dsm devices > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Applied. Thanks, Jonathan > --- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 5 +++- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 10 +++++-- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 28 +++++++++++--------- > 3 files changed, 28 insertions(+), 15 deletions(-) > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > index b4bd02df2900..c2d00c3dd044 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > @@ -197,7 +197,10 @@ struct st_lsm6dsx_shub_settings { > struct st_lsm6dsx_reg aux_sens; > struct st_lsm6dsx_reg wr_once; > u8 num_ext_dev; > - u8 shub_out; > + struct { > + bool sec_page; > + u8 addr; > + } shub_out; > u8 slv0_addr; > u8 dw_slv0_addr; > u8 batch_en; > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > index 6adfc53ef8d0..679831d84d78 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > @@ -885,7 +885,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { > .mask = BIT(6), > }, > .num_ext_dev = 3, > - .shub_out = 0x02, > + .shub_out = { > + .sec_page = true, > + .addr = 0x02, > + }, > .slv0_addr = 0x15, > .dw_slv0_addr = 0x21, > .batch_en = BIT(3), > @@ -1262,7 +1265,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { > .mask = BIT(6), > }, > .num_ext_dev = 3, > - .shub_out = 0x02, > + .shub_out = { > + .sec_page = true, > + .addr = 0x02, > + }, > .slv0_addr = 0x15, > .dw_slv0_addr = 0x21, > .batch_en = BIT(3), > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c > index 767482e61a1e..ccc59682cb66 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c > @@ -105,20 +105,27 @@ static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw) > * > * Read st_lsm6dsx i2c controller register > */ > -static int st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 addr, > - u8 *data, int len) > +static int > +st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 *data, > + int len) > { > + const struct st_lsm6dsx_shub_settings *hub_settings; > int err; > > mutex_lock(&hw->page_lock); > > - err = st_lsm6dsx_set_page(hw, true); > - if (err < 0) > - goto out; > + hub_settings = &hw->settings->shub_settings; > + if (hub_settings->shub_out.sec_page) { > + err = st_lsm6dsx_set_page(hw, true); > + if (err < 0) > + goto out; > + } > > - err = regmap_bulk_read(hw->regmap, addr, data, len); > + err = regmap_bulk_read(hw->regmap, hub_settings->shub_out.addr, > + data, len); > > - st_lsm6dsx_set_page(hw, false); > + if (hub_settings->shub_out.sec_page) > + st_lsm6dsx_set_page(hw, false); > out: > mutex_unlock(&hw->page_lock); > > @@ -236,8 +243,7 @@ st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr, > > st_lsm6dsx_shub_wait_complete(hw); > > - err = st_lsm6dsx_shub_read_reg(hw, hub_settings->shub_out, data, > - len & ST_LS6DSX_READ_OP_MASK); > + err = st_lsm6dsx_shub_read_reg(hw, data, len & ST_LS6DSX_READ_OP_MASK); > > st_lsm6dsx_shub_master_enable(sensor, false); > > @@ -719,9 +725,7 @@ st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr, > > st_lsm6dsx_shub_wait_complete(hw); > > - err = st_lsm6dsx_shub_read_reg(hw, > - hub_settings->shub_out, > - &data, sizeof(data)); > + err = st_lsm6dsx_shub_read_reg(hw, &data, sizeof(data)); > > st_lsm6dsx_shub_master_enable(sensor, false); >
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index b4bd02df2900..c2d00c3dd044 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -197,7 +197,10 @@ struct st_lsm6dsx_shub_settings { struct st_lsm6dsx_reg aux_sens; struct st_lsm6dsx_reg wr_once; u8 num_ext_dev; - u8 shub_out; + struct { + bool sec_page; + u8 addr; + } shub_out; u8 slv0_addr; u8 dw_slv0_addr; u8 batch_en; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 6adfc53ef8d0..679831d84d78 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -885,7 +885,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .mask = BIT(6), }, .num_ext_dev = 3, - .shub_out = 0x02, + .shub_out = { + .sec_page = true, + .addr = 0x02, + }, .slv0_addr = 0x15, .dw_slv0_addr = 0x21, .batch_en = BIT(3), @@ -1262,7 +1265,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .mask = BIT(6), }, .num_ext_dev = 3, - .shub_out = 0x02, + .shub_out = { + .sec_page = true, + .addr = 0x02, + }, .slv0_addr = 0x15, .dw_slv0_addr = 0x21, .batch_en = BIT(3), diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c index 767482e61a1e..ccc59682cb66 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c @@ -105,20 +105,27 @@ static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw) * * Read st_lsm6dsx i2c controller register */ -static int st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 addr, - u8 *data, int len) +static int +st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 *data, + int len) { + const struct st_lsm6dsx_shub_settings *hub_settings; int err; mutex_lock(&hw->page_lock); - err = st_lsm6dsx_set_page(hw, true); - if (err < 0) - goto out; + hub_settings = &hw->settings->shub_settings; + if (hub_settings->shub_out.sec_page) { + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + goto out; + } - err = regmap_bulk_read(hw->regmap, addr, data, len); + err = regmap_bulk_read(hw->regmap, hub_settings->shub_out.addr, + data, len); - st_lsm6dsx_set_page(hw, false); + if (hub_settings->shub_out.sec_page) + st_lsm6dsx_set_page(hw, false); out: mutex_unlock(&hw->page_lock); @@ -236,8 +243,7 @@ st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr, st_lsm6dsx_shub_wait_complete(hw); - err = st_lsm6dsx_shub_read_reg(hw, hub_settings->shub_out, data, - len & ST_LS6DSX_READ_OP_MASK); + err = st_lsm6dsx_shub_read_reg(hw, data, len & ST_LS6DSX_READ_OP_MASK); st_lsm6dsx_shub_master_enable(sensor, false); @@ -719,9 +725,7 @@ st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr, st_lsm6dsx_shub_wait_complete(hw); - err = st_lsm6dsx_shub_read_reg(hw, - hub_settings->shub_out, - &data, sizeof(data)); + err = st_lsm6dsx_shub_read_reg(hw, &data, sizeof(data)); st_lsm6dsx_shub_master_enable(sensor, false);
Check if the sensor hub output register is located in the primary or in the secondary memory page. This is a preliminary patch to support i2c master controller on lsm6dsm devices Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 5 +++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 10 +++++-- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 28 +++++++++++--------- 3 files changed, 28 insertions(+), 15 deletions(-)