@@ -12,7 +12,7 @@ config IIO_ST_LSM6DSX
Say yes here to build support for STMicroelectronics LSM6DSx imu
sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
ism330dlc, lsm6dso, lsm6dsox, asm330lhh, asm330lhhx, lsm6dsr,
- lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop,
+ lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop, lsm6dstx,
the accelerometer/gyroscope of lsm9ds1 and lsm6dst.
To compile this driver as a module, choose M here: the module
@@ -32,6 +32,7 @@
#define ST_LSM6DST_DEV_NAME "lsm6dst"
#define ST_LSM6DSOP_DEV_NAME "lsm6dsop"
#define ST_ASM330LHHX_DEV_NAME "asm330lhhx"
+#define ST_LSM6DSTX_DEV_NAME "lsm6dstx"
enum st_lsm6dsx_hw_id {
ST_LSM6DS3_ID,
@@ -51,6 +52,7 @@ enum st_lsm6dsx_hw_id {
ST_LSM6DST_ID,
ST_LSM6DSOP_ID,
ST_ASM330LHHX_ID,
+ ST_LSM6DSTX_ID,
ST_LSM6DSX_MAX_ID,
};
@@ -15,7 +15,7 @@
* value of the decimation factor and ODR set for each FIFO data set.
*
* LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/LSM6DSRX/ISM330DHCX/
- * LSM6DST/LSM6DSOP:
+ * LSM6DST/LSM6DSOP/LSM6DSTX:
* The FIFO buffer can be configured to store data from gyroscope and
* accelerometer. Each sample is queued with a tag (1B) indicating data
* source (gyroscope, accelerometer, hw timer).
@@ -26,7 +26,8 @@
* - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
* - FIFO size: 4KB
*
- * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP:
+ * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP/
+ * LSM6DSTX:
* - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416,
* 833
* - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
@@ -791,6 +792,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.hw_id = ST_ASM330LHHX_ID,
.name = ST_ASM330LHHX_DEV_NAME,
.wai = 0x6b,
+ }, {
+ .hw_id = ST_LSM6DSTX_ID,
+ .name = ST_LSM6DSTX_DEV_NAME,
+ .wai = 0x6d,
},
},
.channels = {
@@ -105,6 +105,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
.compatible = "st,asm330lhhx",
.data = (void *)ST_ASM330LHHX_ID,
},
+ {
+ .compatible = "st,lsm6dstx",
+ .data = (void *)ST_LSM6DSTX_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
@@ -127,6 +131,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
{ ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID },
{ ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID },
{ ST_ASM330LHHX_DEV_NAME, ST_ASM330LHHX_ID },
+ { ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID },
{},
};
MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
@@ -105,6 +105,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
.compatible = "st,asm330lhhx",
.data = (void *)ST_ASM330LHHX_ID,
},
+ {
+ .compatible = "st,lsm6dstx",
+ .data = (void *)ST_LSM6DSTX_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -127,6 +131,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
{ ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID },
{ ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID },
{ ST_ASM330LHHX_DEV_NAME, ST_ASM330LHHX_ID },
+ { ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID },
{},
};
MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
Add support to STM LSM6DSTX (acc + gyro) Mems sensor. The LSM6DSTX sensor can use LSM6DST as fallback device since it implements all the LSM6DSTX features currently implemented in st_lsm6dsx. Datasheet: https://www.st.com/resource/en/datasheet/lsm6dstx.pdf Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> --- drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 7 ++++++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 6 files changed, 20 insertions(+), 3 deletions(-)