diff mbox series

[RESEND,v3,05/17] dt-bindings: iio: adc: ad7768-1: document regulator provider property

Message ID 78c7d5d139d6c158423804f0e6c81cbfe9717b1b.1739368121.git.Jonathan.Santos@analog.com (mailing list archive)
State Changes Requested
Headers show
Series iio: adc: ad7768-1: Add features, improvements, and fixes | expand

Commit Message

Jonathan Santos Feb. 12, 2025, 6:16 p.m. UTC
The AD7768-1 provides a buffered common-mode voltage output
on the VCM pin that can be used to bias analog input signals.

Add regulators property to enable the use of the VCM output,
referenced here as vcm_output, by any other device.

Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
---
v3 Changes:
* VCM is now provided as a regulator within the device, instead of a 
  custom property.

v2 Changes:
* New patch in v2.
---
 .../bindings/iio/adc/adi,ad7768-1.yaml        | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

Comments

Conor Dooley Feb. 13, 2025, 8:25 p.m. UTC | #1
On Wed, Feb 12, 2025 at 03:16:35PM -0300, Jonathan Santos wrote:
> The AD7768-1 provides a buffered common-mode voltage output
> on the VCM pin that can be used to bias analog input signals.
> 
> Add regulators property to enable the use of the VCM output,
> referenced here as vcm_output, by any other device.
> 
> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
index e2f9782b5fc8..38f7bb0a0e20 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -59,6 +59,19 @@  properties:
       in any way, for example if the filter decimation rate changes.
       As the line is active low, it should be marked GPIO_ACTIVE_LOW.
 
+  regulators:
+    type: object
+    description:
+      list of regulators provided by this controller.
+
+    properties:
+      vcm_output:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
   reset-gpios:
     maxItems: 1
 
@@ -152,6 +165,14 @@  examples:
                 reg = <0>;
                 label = "channel_0";
             };
+
+            regulators {
+              vcm_reg: vcm_output {
+                regulator-name = "vcm_output";
+                regulator-min-microvolt = <900000>;
+                regulator-max-microvolt = <2500000>;
+              };
+            };
         };
     };
 ...