diff mbox series

[v16,09/14] tools/counter: Create Counter tools

Message ID 7fb22281fde0874614a87b0a000b2bf27e17043e.1630031207.git.vilhelm.gray@gmail.com (mailing list archive)
State Changes Requested
Headers show
Series Introduce the Counter character device interface | expand

Commit Message

William Breathitt Gray Aug. 27, 2021, 3:47 a.m. UTC 
This creates an example Counter program under tools/counter/*
to exemplify the Counter character device interface.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 MAINTAINERS                     |  1 +
 tools/Makefile                  | 13 ++---
 tools/counter/Build             |  1 +
 tools/counter/Makefile          | 53 +++++++++++++++++++
 tools/counter/counter_example.c | 93 +++++++++++++++++++++++++++++++++
 5 files changed, 155 insertions(+), 6 deletions(-)
 create mode 100644 tools/counter/Build
 create mode 100644 tools/counter/Makefile
 create mode 100644 tools/counter/counter_example.c

Comments

Jonathan Cameron Sept. 12, 2021, 4:26 p.m. UTC | #1 
On Fri, 27 Aug 2021 12:47:53 +0900
William Breathitt Gray <vilhelm.gray@gmail.com> wrote:

> This creates an example Counter program under tools/counter/*
> to exemplify the Counter character device interface.
> 
> Cc: Pavel Machek <pavel@ucw.cz>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>

It's great to have this example, but it very much an example rather than
a generic tool. You may want to revisit and provide a more generic
tool in the future.

A trivial comment about using a loop inline.

Jonathan

> ---
>  MAINTAINERS                     |  1 +
>  tools/Makefile                  | 13 ++---
>  tools/counter/Build             |  1 +
>  tools/counter/Makefile          | 53 +++++++++++++++++++
>  tools/counter/counter_example.c | 93 +++++++++++++++++++++++++++++++++
>  5 files changed, 155 insertions(+), 6 deletions(-)
>  create mode 100644 tools/counter/Build
>  create mode 100644 tools/counter/Makefile
>  create mode 100644 tools/counter/counter_example.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f2fdd2202605..57dc9b6ff82a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4782,6 +4782,7 @@ F:	Documentation/driver-api/generic-counter.rst
>  F:	drivers/counter/
>  F:	include/linux/counter.h
>  F:	include/uapi/linux/counter.h
> +F:	tools/counter/
>  
>  CP2615 I2C DRIVER
>  M:	Bence Csókás <bence98@sch.bme.hu>
> diff --git a/tools/Makefile b/tools/Makefile
> index 7e9d34ddd74c..5da1fde03a9a 100644
> --- a/tools/Makefile
> +++ b/tools/Makefile
> @@ -12,6 +12,7 @@ help:
>  	@echo '  acpi                   - ACPI tools'
>  	@echo '  bpf                    - misc BPF tools'
>  	@echo '  cgroup                 - cgroup tools'
> +	@echo '  counter                - counter tools'
>  	@echo '  cpupower               - a tool for all things x86 CPU power'
>  	@echo '  debugging              - tools for debugging'
>  	@echo '  firewire               - the userspace part of nosy, an IEEE-1394 traffic sniffer'
> @@ -65,7 +66,7 @@ acpi: FORCE
>  cpupower: FORCE
>  	$(call descend,power/$@)
>  
> -cgroup firewire hv guest bootconfig spi usb virtio vm bpf iio gpio objtool leds wmi pci firmware debugging tracing: FORCE
> +cgroup counter firewire hv guest bootconfig spi usb virtio vm bpf iio gpio objtool leds wmi pci firmware debugging tracing: FORCE
>  	$(call descend,$@)
>  
>  bpf/%: FORCE
> @@ -100,7 +101,7 @@ freefall: FORCE
>  kvm_stat: FORCE
>  	$(call descend,kvm/$@)
>  
> -all: acpi cgroup cpupower gpio hv firewire liblockdep \
> +all: acpi cgroup counter cpupower gpio hv firewire liblockdep \
>  		perf selftests bootconfig spi turbostat usb \
>  		virtio vm bpf x86_energy_perf_policy \
>  		tmon freefall iio objtool kvm_stat wmi \
> @@ -112,7 +113,7 @@ acpi_install:
>  cpupower_install:
>  	$(call descend,power/$(@:_install=),install)
>  
> -cgroup_install firewire_install gpio_install hv_install iio_install perf_install bootconfig_install spi_install usb_install virtio_install vm_install bpf_install objtool_install wmi_install pci_install debugging_install tracing_install:
> +cgroup_install counter_install firewire_install gpio_install hv_install iio_install perf_install bootconfig_install spi_install usb_install virtio_install vm_install bpf_install objtool_install wmi_install pci_install debugging_install tracing_install:
>  	$(call descend,$(@:_install=),install)
>  
>  liblockdep_install:
> @@ -133,7 +134,7 @@ freefall_install:
>  kvm_stat_install:
>  	$(call descend,kvm/$(@:_install=),install)
>  
> -install: acpi_install cgroup_install cpupower_install gpio_install \
> +install: acpi_install cgroup_install counter_install cpupower_install gpio_install \
>  		hv_install firewire_install iio_install liblockdep_install \
>  		perf_install selftests_install turbostat_install usb_install \
>  		virtio_install vm_install bpf_install x86_energy_perf_policy_install \
> @@ -147,7 +148,7 @@ acpi_clean:
>  cpupower_clean:
>  	$(call descend,power/cpupower,clean)
>  
> -cgroup_clean hv_clean firewire_clean bootconfig_clean spi_clean usb_clean virtio_clean vm_clean wmi_clean bpf_clean iio_clean gpio_clean objtool_clean leds_clean pci_clean firmware_clean debugging_clean tracing_clean:
> +cgroup_clean counter_clean hv_clean firewire_clean bootconfig_clean spi_clean usb_clean virtio_clean vm_clean wmi_clean bpf_clean iio_clean gpio_clean objtool_clean leds_clean pci_clean firmware_clean debugging_clean tracing_clean:
>  	$(call descend,$(@:_clean=),clean)
>  
>  liblockdep_clean:
> @@ -181,7 +182,7 @@ freefall_clean:
>  build_clean:
>  	$(call descend,build,clean)
>  
> -clean: acpi_clean cgroup_clean cpupower_clean hv_clean firewire_clean \
> +clean: acpi_clean cgroup_clean counter_clean cpupower_clean hv_clean firewire_clean \

This is far from alphabetical, though I have no idea if there is any strong convention on where
to add new entries.

>  		perf_clean selftests_clean turbostat_clean bootconfig_clean spi_clean usb_clean virtio_clean \
>  		vm_clean bpf_clean iio_clean x86_energy_perf_policy_clean tmon_clean \
>  		freefall_clean build_clean libbpf_clean libsubcmd_clean liblockdep_clean \
> diff --git a/tools/counter/Build b/tools/counter/Build
> new file mode 100644
> index 000000000000..33f4a51d715e
> --- /dev/null
> +++ b/tools/counter/Build
> @@ -0,0 +1 @@
> +counter_example-y += counter_example.o
> diff --git a/tools/counter/Makefile b/tools/counter/Makefile
> new file mode 100644
> index 000000000000..5ebc195fd9c0
> --- /dev/null
> +++ b/tools/counter/Makefile
> @@ -0,0 +1,53 @@
> +# SPDX-License-Identifier: GPL-2.0
> +include ../scripts/Makefile.include
> +
> +bindir ?= /usr/bin
> +
> +ifeq ($(srctree),)
> +srctree := $(patsubst %/,%,$(dir $(CURDIR)))
> +srctree := $(patsubst %/,%,$(dir $(srctree)))
> +endif
> +
> +# Do not use make's built-in rules
> +# (this improves performance and avoids hard-to-debug behaviour);
> +MAKEFLAGS += -r
> +
> +override CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include
> +
> +ALL_TARGETS := counter_example
> +ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS))
> +
> +all: $(ALL_PROGRAMS)
> +
> +export srctree OUTPUT CC LD CFLAGS
> +include $(srctree)/tools/build/Makefile.include
> +
> +#
> +# We need the following to be outside of kernel tree
> +#
> +$(OUTPUT)include/linux/counter.h: ../../include/uapi/linux/counter.h
> +	mkdir -p $(OUTPUT)include/linux 2>&1 || true
> +	ln -sf $(CURDIR)/../../include/uapi/linux/counter.h $@
> +
> +prepare: $(OUTPUT)include/linux/counter.h
> +
> +COUNTER_EXAMPLE := $(OUTPUT)counter_example.o
> +$(COUNTER_EXAMPLE): prepare FORCE
> +	$(Q)$(MAKE) $(build)=counter_example
> +$(OUTPUT)counter_example: $(COUNTER_EXAMPLE)
> +	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
> +
> +clean:
> +	rm -f $(ALL_PROGRAMS)
> +	rm -rf $(OUTPUT)include/linux/counter.h
> +	find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete
> +
> +install: $(ALL_PROGRAMS)
> +	install -d -m 755 $(DESTDIR)$(bindir);		\
> +	for program in $(ALL_PROGRAMS); do		\
> +		install $$program $(DESTDIR)$(bindir);	\
> +	done
> +
> +FORCE:
> +
> +.PHONY: all install clean FORCE prepare
> diff --git a/tools/counter/counter_example.c b/tools/counter/counter_example.c
> new file mode 100644
> index 000000000000..90d69fb9463b
> --- /dev/null
> +++ b/tools/counter/counter_example.c
> @@ -0,0 +1,93 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/* Counter - example userspace application
> + *
> + * The userspace application opens /dev/counter0, configures the
> + * COUNTER_EVENT_INDEX event channel 0 to gather Count 0 count and Count
> + * 1 count, and prints out the data as it becomes available on the
> + * character device node.
> + *
> + * Copyright (C) 2021 William Breathitt Gray
> + */
> +#include <errno.h>
> +#include <fcntl.h>
> +#include <linux/counter.h>
> +#include <stdio.h>
> +#include <string.h>
> +#include <sys/ioctl.h>
> +#include <unistd.h>
> +
> +static struct counter_watch watches[2] = {
> +	{
> +		/* Component data: Count 0 count */
> +		.component.type = COUNTER_COMPONENT_COUNT,
> +		.component.scope = COUNTER_SCOPE_COUNT,
> +		.component.parent = 0,
> +		/* Event type: Index */
> +		.event = COUNTER_EVENT_INDEX,
> +		/* Device event channel 0 */
> +		.channel = 0,
> +	},
> +	{
> +		/* Component data: Count 1 count */
> +		.component.type = COUNTER_COMPONENT_COUNT,
> +		.component.scope = COUNTER_SCOPE_COUNT,
> +		.component.parent = 1,
> +		/* Event type: Index */
> +		.event = COUNTER_EVENT_INDEX,
> +		/* Device event channel 0 */
> +		.channel = 0,
> +	},
> +};
> +
> +int main(void)
> +{
> +	int fd;
> +	int ret;
> +	struct counter_event event_data[2];
> +
> +	fd = open("/dev/counter0", O_RDWR);

You may want to make this tool more flexible at somepoint. It is
in tools rather than Documentation after all.

> +	if (fd == -1) {
> +		perror("Unable to open /dev/counter0");
> +		return -errno;
> +	}
> +
> +	ret = ioctl(fd, COUNTER_ADD_WATCH_IOCTL, watches);

Loop?

> +	if (ret == -1) {
> +		perror("Error adding watches[0]");
> +		return -errno;
> +	}
> +	ret = ioctl(fd, COUNTER_ADD_WATCH_IOCTL, watches + 1);
> +	if (ret == -1) {
> +		perror("Error adding watches[1]");
> +		return -errno;
> +	}
> +	ret = ioctl(fd, COUNTER_ENABLE_EVENTS_IOCTL);
> +	if (ret == -1) {
> +		perror("Error enabling events");
> +		return -errno;
> +	}
> +
> +	for (;;) {
> +		ret = read(fd, event_data, sizeof(event_data));
> +		if (ret == -1) {
> +			perror("Failed to read event data");
> +			return 1;
> +		}
> +
> +		if (ret != sizeof(event_data)) {
> +			fprintf(stderr, "Failed to read event data\n");
> +			return -EIO;
> +		}
> +
> +		printf("Timestamp 0: %llu\tCount 0: %llu\n"
> +		       "Error Message 0: %s\n"
> +		       "Timestamp 1: %llu\tCount 1: %llu\n"
> +		       "Error Message 1: %s\n",
> +		       event_data[0].timestamp, event_data[0].value,
> +		       strerror(event_data[0].status),
> +		       event_data[1].timestamp, event_data[1].value,
> +		       strerror(event_data[1].status));
> +	}
> +
> +	return 0;
> +}
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index f2fdd2202605..57dc9b6ff82a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4782,6 +4782,7 @@  F:	Documentation/driver-api/generic-counter.rst
 F:	drivers/counter/
 F:	include/linux/counter.h
 F:	include/uapi/linux/counter.h
+F:	tools/counter/
 
 CP2615 I2C DRIVER
 M:	Bence Csókás <bence98@sch.bme.hu>
diff --git a/tools/Makefile b/tools/Makefile
index 7e9d34ddd74c..5da1fde03a9a 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -12,6 +12,7 @@  help:
 	@echo '  acpi                   - ACPI tools'
 	@echo '  bpf                    - misc BPF tools'
 	@echo '  cgroup                 - cgroup tools'
+	@echo '  counter                - counter tools'
 	@echo '  cpupower               - a tool for all things x86 CPU power'
 	@echo '  debugging              - tools for debugging'
 	@echo '  firewire               - the userspace part of nosy, an IEEE-1394 traffic sniffer'
@@ -65,7 +66,7 @@  acpi: FORCE
 cpupower: FORCE
 	$(call descend,power/$@)
 
-cgroup firewire hv guest bootconfig spi usb virtio vm bpf iio gpio objtool leds wmi pci firmware debugging tracing: FORCE
+cgroup counter firewire hv guest bootconfig spi usb virtio vm bpf iio gpio objtool leds wmi pci firmware debugging tracing: FORCE
 	$(call descend,$@)
 
 bpf/%: FORCE
@@ -100,7 +101,7 @@  freefall: FORCE
 kvm_stat: FORCE
 	$(call descend,kvm/$@)
 
-all: acpi cgroup cpupower gpio hv firewire liblockdep \
+all: acpi cgroup counter cpupower gpio hv firewire liblockdep \
 		perf selftests bootconfig spi turbostat usb \
 		virtio vm bpf x86_energy_perf_policy \
 		tmon freefall iio objtool kvm_stat wmi \
@@ -112,7 +113,7 @@  acpi_install:
 cpupower_install:
 	$(call descend,power/$(@:_install=),install)
 
-cgroup_install firewire_install gpio_install hv_install iio_install perf_install bootconfig_install spi_install usb_install virtio_install vm_install bpf_install objtool_install wmi_install pci_install debugging_install tracing_install:
+cgroup_install counter_install firewire_install gpio_install hv_install iio_install perf_install bootconfig_install spi_install usb_install virtio_install vm_install bpf_install objtool_install wmi_install pci_install debugging_install tracing_install:
 	$(call descend,$(@:_install=),install)
 
 liblockdep_install:
@@ -133,7 +134,7 @@  freefall_install:
 kvm_stat_install:
 	$(call descend,kvm/$(@:_install=),install)
 
-install: acpi_install cgroup_install cpupower_install gpio_install \
+install: acpi_install cgroup_install counter_install cpupower_install gpio_install \
 		hv_install firewire_install iio_install liblockdep_install \
 		perf_install selftests_install turbostat_install usb_install \
 		virtio_install vm_install bpf_install x86_energy_perf_policy_install \
@@ -147,7 +148,7 @@  acpi_clean:
 cpupower_clean:
 	$(call descend,power/cpupower,clean)
 
-cgroup_clean hv_clean firewire_clean bootconfig_clean spi_clean usb_clean virtio_clean vm_clean wmi_clean bpf_clean iio_clean gpio_clean objtool_clean leds_clean pci_clean firmware_clean debugging_clean tracing_clean:
+cgroup_clean counter_clean hv_clean firewire_clean bootconfig_clean spi_clean usb_clean virtio_clean vm_clean wmi_clean bpf_clean iio_clean gpio_clean objtool_clean leds_clean pci_clean firmware_clean debugging_clean tracing_clean:
 	$(call descend,$(@:_clean=),clean)
 
 liblockdep_clean:
@@ -181,7 +182,7 @@  freefall_clean:
 build_clean:
 	$(call descend,build,clean)
 
-clean: acpi_clean cgroup_clean cpupower_clean hv_clean firewire_clean \
+clean: acpi_clean cgroup_clean counter_clean cpupower_clean hv_clean firewire_clean \
 		perf_clean selftests_clean turbostat_clean bootconfig_clean spi_clean usb_clean virtio_clean \
 		vm_clean bpf_clean iio_clean x86_energy_perf_policy_clean tmon_clean \
 		freefall_clean build_clean libbpf_clean libsubcmd_clean liblockdep_clean \
diff --git a/tools/counter/Build b/tools/counter/Build
new file mode 100644
index 000000000000..33f4a51d715e
--- /dev/null
+++ b/tools/counter/Build
@@ -0,0 +1 @@ 
+counter_example-y += counter_example.o
diff --git a/tools/counter/Makefile b/tools/counter/Makefile
new file mode 100644
index 000000000000..5ebc195fd9c0
--- /dev/null
+++ b/tools/counter/Makefile
@@ -0,0 +1,53 @@ 
+# SPDX-License-Identifier: GPL-2.0
+include ../scripts/Makefile.include
+
+bindir ?= /usr/bin
+
+ifeq ($(srctree),)
+srctree := $(patsubst %/,%,$(dir $(CURDIR)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+endif
+
+# Do not use make's built-in rules
+# (this improves performance and avoids hard-to-debug behaviour);
+MAKEFLAGS += -r
+
+override CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include
+
+ALL_TARGETS := counter_example
+ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS))
+
+all: $(ALL_PROGRAMS)
+
+export srctree OUTPUT CC LD CFLAGS
+include $(srctree)/tools/build/Makefile.include
+
+#
+# We need the following to be outside of kernel tree
+#
+$(OUTPUT)include/linux/counter.h: ../../include/uapi/linux/counter.h
+	mkdir -p $(OUTPUT)include/linux 2>&1 || true
+	ln -sf $(CURDIR)/../../include/uapi/linux/counter.h $@
+
+prepare: $(OUTPUT)include/linux/counter.h
+
+COUNTER_EXAMPLE := $(OUTPUT)counter_example.o
+$(COUNTER_EXAMPLE): prepare FORCE
+	$(Q)$(MAKE) $(build)=counter_example
+$(OUTPUT)counter_example: $(COUNTER_EXAMPLE)
+	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
+
+clean:
+	rm -f $(ALL_PROGRAMS)
+	rm -rf $(OUTPUT)include/linux/counter.h
+	find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete
+
+install: $(ALL_PROGRAMS)
+	install -d -m 755 $(DESTDIR)$(bindir);		\
+	for program in $(ALL_PROGRAMS); do		\
+		install $$program $(DESTDIR)$(bindir);	\
+	done
+
+FORCE:
+
+.PHONY: all install clean FORCE prepare
diff --git a/tools/counter/counter_example.c b/tools/counter/counter_example.c
new file mode 100644
index 000000000000..90d69fb9463b
--- /dev/null
+++ b/tools/counter/counter_example.c
@@ -0,0 +1,93 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/* Counter - example userspace application
+ *
+ * The userspace application opens /dev/counter0, configures the
+ * COUNTER_EVENT_INDEX event channel 0 to gather Count 0 count and Count
+ * 1 count, and prints out the data as it becomes available on the
+ * character device node.
+ *
+ * Copyright (C) 2021 William Breathitt Gray
+ */
+#include <errno.h>
+#include <fcntl.h>
+#include <linux/counter.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <unistd.h>
+
+static struct counter_watch watches[2] = {
+	{
+		/* Component data: Count 0 count */
+		.component.type = COUNTER_COMPONENT_COUNT,
+		.component.scope = COUNTER_SCOPE_COUNT,
+		.component.parent = 0,
+		/* Event type: Index */
+		.event = COUNTER_EVENT_INDEX,
+		/* Device event channel 0 */
+		.channel = 0,
+	},
+	{
+		/* Component data: Count 1 count */
+		.component.type = COUNTER_COMPONENT_COUNT,
+		.component.scope = COUNTER_SCOPE_COUNT,
+		.component.parent = 1,
+		/* Event type: Index */
+		.event = COUNTER_EVENT_INDEX,
+		/* Device event channel 0 */
+		.channel = 0,
+	},
+};
+
+int main(void)
+{
+	int fd;
+	int ret;
+	struct counter_event event_data[2];
+
+	fd = open("/dev/counter0", O_RDWR);
+	if (fd == -1) {
+		perror("Unable to open /dev/counter0");
+		return -errno;
+	}
+
+	ret = ioctl(fd, COUNTER_ADD_WATCH_IOCTL, watches);
+	if (ret == -1) {
+		perror("Error adding watches[0]");
+		return -errno;
+	}
+	ret = ioctl(fd, COUNTER_ADD_WATCH_IOCTL, watches + 1);
+	if (ret == -1) {
+		perror("Error adding watches[1]");
+		return -errno;
+	}
+	ret = ioctl(fd, COUNTER_ENABLE_EVENTS_IOCTL);
+	if (ret == -1) {
+		perror("Error enabling events");
+		return -errno;
+	}
+
+	for (;;) {
+		ret = read(fd, event_data, sizeof(event_data));
+		if (ret == -1) {
+			perror("Failed to read event data");
+			return 1;
+		}
+
+		if (ret != sizeof(event_data)) {
+			fprintf(stderr, "Failed to read event data\n");
+			return -EIO;
+		}
+
+		printf("Timestamp 0: %llu\tCount 0: %llu\n"
+		       "Error Message 0: %s\n"
+		       "Timestamp 1: %llu\tCount 1: %llu\n"
+		       "Error Message 1: %s\n",
+		       event_data[0].timestamp, event_data[0].value,
+		       strerror(event_data[0].status),
+		       event_data[1].timestamp, event_data[1].value,
+		       strerror(event_data[1].status));
+	}
+
+	return 0;
+}