diff mbox

iio/adc/ad7291: Improve unlocking of a mutex in ad7291_read_raw()

Message ID a53248a9-4422-4436-aa43-bfbd2b60a85f@users.sourceforge.net (mailing list archive)
State New, archived
Headers show

Commit Message

SF Markus Elfring March 13, 2018, 7:16 p.m. UTC
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Tue, 13 Mar 2018 20:08:40 +0100

* Add a jump target so that a call of the function "mutex_unlock" is stored
  only once in this function implementation.

* Replace three calls by goto statements.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/iio/adc/ad7291.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

Comments

Jonathan Cameron March 18, 2018, 10:18 a.m. UTC | #1
On Tue, 13 Mar 2018 20:16:27 +0100
SF Markus Elfring <elfring@users.sourceforge.net> wrote:

> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Tue, 13 Mar 2018 20:08:40 +0100
> 
> * Add a jump target so that a call of the function "mutex_unlock" is stored
>   only once in this function implementation.
> 
> * Replace three calls by goto statements.
> 
> This issue was detected by using the Coccinelle software.
> 
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> ---
>  drivers/iio/adc/ad7291.c | 22 +++++++++++-----------
>  1 file changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7291.c b/drivers/iio/adc/ad7291.c
> index a862b5d8fb4b..b2c3d4c79909 100644
> --- a/drivers/iio/adc/ad7291.c
> +++ b/drivers/iio/adc/ad7291.c
> @@ -335,27 +335,27 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
>  			mutex_lock(&chip->state_lock);
>  			/* If in autocycle mode drop through */
>  			if (chip->command & AD7291_AUTOCYCLE) {
> -				mutex_unlock(&chip->state_lock);
> -				return -EBUSY;
> +				ret = -EBUSY;
> +				goto unlock;
>  			}
>  			/* Enable this channel alone */
>  			regval = chip->command & (~AD7291_VOLTAGE_MASK);
>  			regval |= BIT(15 - chan->channel);
>  			ret = ad7291_i2c_write(chip, AD7291_COMMAND, regval);
> -			if (ret < 0) {
> -				mutex_unlock(&chip->state_lock);
> -				return ret;
> -			}
> +			if (ret < 0)
> +				goto unlock;
> +
>  			/* Read voltage */
>  			ret = i2c_smbus_read_word_swapped(chip->client,
>  							  AD7291_VOLTAGE);
> -			if (ret < 0) {
> -				mutex_unlock(&chip->state_lock);
> -				return ret;
> -			}
> +			if (ret < 0)
> +				goto unlock;
> +
>  			*val = ret & AD7291_VALUE_MASK;
> +			ret = IIO_VAL_INT;
> +unlock:
>  			mutex_unlock(&chip->state_lock);
> -			return IIO_VAL_INT;
> +			return ret;
This localized error handling makes for complex code flow.  It does however
suggest that perhaps this block of code would be better in it's own function
with nice clean internal error handling.

>  		case IIO_TEMP:
>  			/* Assumes tsense bit of command register always set */
>  			ret = i2c_smbus_read_word_swapped(chip->client,

Markus, please throttle these patches to one at a time.  If you send lots
of similar patches before anyone has reviewed any of them it wastes both
your and reviewers time.

Thanks,

Jonathan
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/iio/adc/ad7291.c b/drivers/iio/adc/ad7291.c
index a862b5d8fb4b..b2c3d4c79909 100644
--- a/drivers/iio/adc/ad7291.c
+++ b/drivers/iio/adc/ad7291.c
@@ -335,27 +335,27 @@  static int ad7291_read_raw(struct iio_dev *indio_dev,
 			mutex_lock(&chip->state_lock);
 			/* If in autocycle mode drop through */
 			if (chip->command & AD7291_AUTOCYCLE) {
-				mutex_unlock(&chip->state_lock);
-				return -EBUSY;
+				ret = -EBUSY;
+				goto unlock;
 			}
 			/* Enable this channel alone */
 			regval = chip->command & (~AD7291_VOLTAGE_MASK);
 			regval |= BIT(15 - chan->channel);
 			ret = ad7291_i2c_write(chip, AD7291_COMMAND, regval);
-			if (ret < 0) {
-				mutex_unlock(&chip->state_lock);
-				return ret;
-			}
+			if (ret < 0)
+				goto unlock;
+
 			/* Read voltage */
 			ret = i2c_smbus_read_word_swapped(chip->client,
 							  AD7291_VOLTAGE);
-			if (ret < 0) {
-				mutex_unlock(&chip->state_lock);
-				return ret;
-			}
+			if (ret < 0)
+				goto unlock;
+
 			*val = ret & AD7291_VALUE_MASK;
+			ret = IIO_VAL_INT;
+unlock:
 			mutex_unlock(&chip->state_lock);
-			return IIO_VAL_INT;
+			return ret;
 		case IIO_TEMP:
 			/* Assumes tsense bit of command register always set */
 			ret = i2c_smbus_read_word_swapped(chip->client,