From patchwork Sun Nov 11 14:15:33 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lorenzo Bianconi X-Patchwork-Id: 10677671 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 490C8109C for ; Sun, 11 Nov 2018 14:16:03 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 3630E2AA61 for ; Sun, 11 Nov 2018 14:16:03 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 2A4AB2AA62; Sun, 11 Nov 2018 14:16:03 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 691712AA5B for ; Sun, 11 Nov 2018 14:16:01 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728126AbeKLAEl (ORCPT ); Sun, 11 Nov 2018 19:04:41 -0500 Received: from mail-wr1-f68.google.com ([209.85.221.68]:38255 "EHLO mail-wr1-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728236AbeKLAEl (ORCPT ); Sun, 11 Nov 2018 19:04:41 -0500 Received: by mail-wr1-f68.google.com with SMTP id e3-v6so6566631wrs.5 for ; Sun, 11 Nov 2018 06:15:57 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=oDTFeXm3Z7Rl9x8NVkIwp51x9MZ+pRzW8YkYPx3nY/I=; b=r7rgQGNKYWQPOYw5VhDX6duhxqWLaknP0iCMzeYzriErSthiU3pRRO3R8MofucjFrx SFg+36d9TzfiuvEOjRNJAXahgxr9vnHoQ4Es/TvtaaYW5Jf4yfYf/QUhzz2lohNVfu2j EKv8XXMIdPx+7Kq6xg4qfAjCz9rU1ngx3VeuNexcuv7ZSLrr7qTzdsrHlnmwwI+o51Tn 8BdHXIF2y1yZYgCuIu7IobYyicEp+sDuUs29B4bqeh9pgzZbUbeUk8trrcEZJ13aX4V4 JAs0qQ7eLiF3YyzPi/BO1kUCSqTA22BWLrO65FLY/Y4THiPJAday69JEeZ4fbK/t2pgL 9L2A== X-Gm-Message-State: AGRZ1gKvUVfXaR1SeRRUCDI8tNXaV/EPR2RJpmeqR2v55LXmF4+TbYH0 xrboZfl2nawcj2V/kFr/An6mhcGaoCs= X-Google-Smtp-Source: AJdET5cTy0X3380ndgwvX0LjYaFZGAMgIqX5WtiWQxhCshPdAgZbeSO3sablgzpx0ATItU5WhwskZg== X-Received: by 2002:a05:6000:11cb:: with SMTP id i11mr14310331wrx.234.1541945756709; Sun, 11 Nov 2018 06:15:56 -0800 (PST) Received: from localhost.localdomain ([151.66.8.224]) by smtp.gmail.com with ESMTPSA id w11-v6sm15861685wrr.96.2018.11.11.06.15.55 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 11 Nov 2018 06:15:56 -0800 (PST) From: Lorenzo Bianconi To: jic23@kernel.org Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH v2 6/9] iio: imu: st_lsm6dsx: add i2c embedded controller support Date: Sun, 11 Nov 2018 15:15:33 +0100 Message-Id: X-Mailer: git-send-email 2.19.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP i2c controller embedded in lsm6dx series can connect up to four slave devices using accelerometer sensor as trigger for i2c read/write operations. Introduce sensor hub support for lsm6dso sensor. Add register map for lis2mdl magnetometer sensor. In order to perform single read/write operations st_lsm6dsx driver relies on SLV0 channel (hw FIFO is not supported yet) Signed-off-by: Lorenzo Bianconi --- drivers/iio/imu/st_lsm6dsx/Makefile | 3 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 112 +++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 135 ++-- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 702 ++++++++++++++++++ .../linux/platform_data/st_sensors_pdata.h | 2 + 5 files changed, 911 insertions(+), 43 deletions(-) create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile index 35919febea2a..e5f733ce6e11 100644 --- a/drivers/iio/imu/st_lsm6dsx/Makefile +++ b/drivers/iio/imu/st_lsm6dsx/Makefile @@ -1,4 +1,5 @@ -st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o +st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \ + st_lsm6dsx_shub.o obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index 2beb4f563892..d20746eb3d2d 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -43,6 +43,24 @@ enum st_lsm6dsx_hw_id { * ST_LSM6DSX_TAGGED_SAMPLE_SIZE) #define ST_LSM6DSX_SHIFT_VAL(val, mask) (((val) << __ffs(mask)) & (mask)) +#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx) \ +{ \ + .type = chan_type, \ + .address = addr, \ + .modified = 1, \ + .channel2 = mod, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = scan_idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ +} + struct st_lsm6dsx_reg { u8 addr; u8 mask; @@ -50,6 +68,28 @@ struct st_lsm6dsx_reg { struct st_lsm6dsx_hw; +struct st_lsm6dsx_odr { + u16 hz; + u8 val; +}; + +#define ST_LSM6DSX_ODR_LIST_SIZE 6 +struct st_lsm6dsx_odr_table_entry { + struct st_lsm6dsx_reg reg; + struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE]; +}; + +struct st_lsm6dsx_fs { + u32 gain; + u8 val; +}; + +#define ST_LSM6DSX_FS_LIST_SIZE 4 +struct st_lsm6dsx_fs_table_entry { + struct st_lsm6dsx_reg reg; + struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE]; +}; + /** * struct st_lsm6dsx_fifo_ops - ST IMU FIFO settings * @read_fifo: Read FIFO callback. @@ -84,6 +124,66 @@ struct st_lsm6dsx_hw_ts_settings { struct st_lsm6dsx_reg decimator; }; +/** + * struct st_lsm6dsx_shub_settings - ST IMU hw i2c controller settings + * @page_mux: register page mux info (addr + mask). + * @master_en: master config register info (addr + mask). + * @pullup_en: i2c controller pull-up register info (addr + mask). + * @aux_sens: aux sensor register info (addr + mask). + * @shub_out: sensor hub first output register info. + * @slv0_addr: slave0 address in secondary page. + * @dw_slv0_addr: slave0 write register address in secondary page. + */ +struct st_lsm6dsx_shub_settings { + struct st_lsm6dsx_reg page_mux; + struct st_lsm6dsx_reg master_en; + struct st_lsm6dsx_reg pullup_en; + struct st_lsm6dsx_reg aux_sens; + u8 shub_out; + u8 slv0_addr; + u8 dw_slv0_addr; +}; + +enum st_lsm6dsx_ext_sensor_id { + ST_LSM6DSX_ID_MAGN, +}; + +/** + * struct st_lsm6dsx_ext_dev_settings - i2c controller slave settings + * @i2c_addr: I2c slave address list. + * @wai: Wai address info. + * @id: external sensor id. + * @odr: Output data rate of the sensor [Hz]. + * @gain: Configured sensor sensitivity. + * @temp_comp: Temperature compensation register info (addr + mask). + * @pwr_table: Power on register info (addr + mask). + * @off_canc: Offset cancellation register info (addr + mask). + * @bdu: Block data update register info (addr + mask). + * @out: Output register info. + */ +struct st_lsm6dsx_ext_dev_settings { + u8 i2c_addr[2]; + struct { + u8 addr; + u8 val; + } wai; + enum st_lsm6dsx_ext_sensor_id id; + struct st_lsm6dsx_odr_table_entry odr_table; + struct st_lsm6dsx_fs_table_entry fs_table; + struct st_lsm6dsx_reg temp_comp; + struct { + struct st_lsm6dsx_reg reg; + u8 off_val; + u8 on_val; + } pwr_table; + struct st_lsm6dsx_reg off_canc; + struct st_lsm6dsx_reg bdu; + struct { + u8 addr; + u8 len; + } out; +}; + /** * struct st_lsm6dsx_settings - ST IMU sensor settings * @wai: Sensor WhoAmI default value. @@ -93,6 +193,7 @@ struct st_lsm6dsx_hw_ts_settings { * @batch: List of FIFO batching register info (addr + mask). * @fifo_ops: Sensor hw FIFO parameters. * @ts_settings: Hw timer related settings. + * @shub_settings: i2c controller related settings. */ struct st_lsm6dsx_settings { u8 wai; @@ -102,6 +203,7 @@ struct st_lsm6dsx_settings { struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID]; struct st_lsm6dsx_fifo_ops fifo_ops; struct st_lsm6dsx_hw_ts_settings ts_settings; + struct st_lsm6dsx_shub_settings shub_settings; }; enum st_lsm6dsx_sensor_id { @@ -129,6 +231,7 @@ enum st_lsm6dsx_fifo_mode { * @sip: Number of samples in a given pattern. * @decimator: FIFO decimation factor. * @ts_ref: Sensor timestamp reference for hw one. + * @ext_info: Sensor settings if it is connected to i2c controller */ struct st_lsm6dsx_sensor { char name[32]; @@ -142,6 +245,11 @@ struct st_lsm6dsx_sensor { u8 sip; u8 decimator; s64 ts_ref; + + struct { + const struct st_lsm6dsx_ext_dev_settings *settings; + u8 addr; + } ext_info; }; /** @@ -181,6 +289,7 @@ struct st_lsm6dsx_hw { const struct st_lsm6dsx_settings *settings; }; +static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0}; extern const struct dev_pm_ops st_lsm6dsx_pm_ops; int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, @@ -197,6 +306,9 @@ int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw, int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw); int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw); int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val); +int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name); +int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable); +int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable); static inline int st_lsm6dsx_update_bits_locked(struct st_lsm6dsx_hw *hw, unsigned int addr, diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 28ddedbd1304..149080acd859 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -88,17 +88,6 @@ #define ST_LSM6DSX_GYRO_FS_1000_GAIN IIO_DEGREE_TO_RAD(35000) #define ST_LSM6DSX_GYRO_FS_2000_GAIN IIO_DEGREE_TO_RAD(70000) -struct st_lsm6dsx_odr { - u16 hz; - u8 val; -}; - -#define ST_LSM6DSX_ODR_LIST_SIZE 6 -struct st_lsm6dsx_odr_table_entry { - struct st_lsm6dsx_reg reg; - struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE]; -}; - static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = { [ST_LSM6DSX_ID_ACC] = { .reg = { @@ -126,17 +115,6 @@ static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = { } }; -struct st_lsm6dsx_fs { - u32 gain; - u8 val; -}; - -#define ST_LSM6DSX_FS_LIST_SIZE 4 -struct st_lsm6dsx_fs_table_entry { - struct st_lsm6dsx_reg reg; - struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE]; -}; - static const struct st_lsm6dsx_fs_table_entry st_lsm6dsx_fs_table[] = { [ST_LSM6DSX_ID_ACC] = { .reg = { @@ -342,27 +320,30 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .mask = GENMASK(7, 6), }, }, + .shub_settings = { + .page_mux = { + .addr = 0x01, + .mask = BIT(6), + }, + .master_en = { + .addr = 0x14, + .mask = BIT(2), + }, + .pullup_en = { + .addr = 0x14, + .mask = BIT(3), + }, + .aux_sens = { + .addr = 0x14, + .mask = GENMASK(1, 0), + }, + .shub_out = 0x02, + .slv0_addr = 0x15, + .dw_slv0_addr = 0x21, + } }, }; -#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx) \ -{ \ - .type = chan_type, \ - .address = addr, \ - .modified = 1, \ - .channel2 = mod, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ - BIT(IIO_CHAN_INFO_SCALE), \ - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ - .scan_index = scan_idx, \ - .scan_type = { \ - .sign = 's', \ - .realbits = 16, \ - .storagebits = 16, \ - .endianness = IIO_LE, \ - }, \ -} - static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = { ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR, IIO_MOD_X, 0), @@ -383,6 +364,21 @@ static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(3), }; +int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + unsigned int data; + int err; + + hub_settings = &hw->settings->shub_settings; + data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->page_mux.mask); + err = regmap_update_bits(hw->regmap, hub_settings->page_mux.addr, + hub_settings->page_mux.mask, data); + usleep_range(100, 150); + + return err; +} + static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id) { int err, i, j, data; @@ -736,8 +732,6 @@ static const struct iio_info st_lsm6dsx_gyro_info = { .hwfifo_set_watermark = st_lsm6dsx_set_watermark, }; -static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0}; - static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin) { struct device_node *np = hw->dev->of_node; @@ -776,6 +770,51 @@ static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg) return err; } +static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct device_node *np = hw->dev->of_node; + struct st_sensors_platform_data *pdata; + unsigned int data; + int err = 0; + + hub_settings = &hw->settings->shub_settings; + + pdata = (struct st_sensors_platform_data *)hw->dev->platform_data; + if ((np && of_property_read_bool(np, "st,pullups")) || + (pdata && pdata->pullups)) { + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + return err; + + data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->pullup_en.mask); + err = regmap_update_bits(hw->regmap, + hub_settings->pullup_en.addr, + hub_settings->pullup_en.mask, data); + + st_lsm6dsx_set_page(hw, false); + + if (err < 0) + return err; + } + + if (hub_settings->aux_sens.addr) { + /* configure aux sensors */ + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + return err; + + data = ST_LSM6DSX_SHIFT_VAL(3, hub_settings->aux_sens.mask); + err = regmap_update_bits(hw->regmap, + hub_settings->aux_sens.addr, + hub_settings->aux_sens.mask, data); + + st_lsm6dsx_set_page(hw, false); + } + + return err; +} + static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw) { const struct st_lsm6dsx_hw_ts_settings *ts_settings; @@ -856,6 +895,10 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw) if (err < 0) return err; + err = st_lsm6dsx_init_shub(hw); + if (err < 0) + return err; + return st_lsm6dsx_init_hw_timer(hw); } @@ -909,6 +952,7 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw, int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, struct regmap *regmap) { + const struct st_lsm6dsx_shub_settings *hub_settings; struct st_lsm6dsx_hw *hw; int i, err; @@ -944,6 +988,13 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, if (err < 0) return err; + hub_settings = &hw->settings->shub_settings; + if (hub_settings->master_en.addr) { + err = st_lsm6dsx_shub_probe(hw, name); + if (err < 0) + return err; + } + if (hw->irq > 0) { err = st_lsm6dsx_fifo_setup(hw); if (err < 0) diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c new file mode 100644 index 000000000000..d6c5ffe9b556 --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c @@ -0,0 +1,702 @@ +/* + * STMicroelectronics st_lsm6dsx i2c controller driver + * + * i2c controller embedded in lsm6dx series can connect up to four + * slave devices using accelerometer sensor as trigger for i2c + * read/write operations. Current implementation relies on SLV0 channel + * for slave configuration and SLV{1,2,3} to read data and push them into + * the hw FIFO + * + * Copyright (C) 2018 Lorenzo Bianconi + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +#include +#include +#include +#include +#include + +#include "st_lsm6dsx.h" + +#define ST_LSM6DSX_MAX_SLV_NUM 3 +#define ST_LSM6DSX_SLV_ADDR(n, base) ((base) + (n) * 3) +#define ST_LSM6DSX_SLV_SUB_ADDR(n, base) ((base) + 1 + (n) * 3) +#define ST_LSM6DSX_SLV_CONFIG(n, base) ((base) + 2 + (n) * 3) + +#define ST_LS6DSX_READ_OP_MASK GENMASK(2, 0) + +static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = { + /* LIS2MDL */ + { + .i2c_addr = { 0x1e }, + .wai = { + .addr = 0x4f, + .val = 0x40, + }, + .id = ST_LSM6DSX_ID_MAGN, + .odr_table = { + .reg = { + .addr = 0x60, + .mask = GENMASK(3, 2), + }, + .odr_avl[0] = { 10, 0x0 }, + .odr_avl[1] = { 20, 0x1 }, + .odr_avl[2] = { 50, 0x2 }, + .odr_avl[3] = { 100, 0x3 }, + }, + .fs_table = { + .fs_avl[0] = { + .gain = 1500, + .val = 0x0, + }, /* 1500 uG/LSB */ + }, + .temp_comp = { + .addr = 0x60, + .mask = BIT(7), + }, + .pwr_table = { + .reg = { + .addr = 0x60, + .mask = GENMASK(1, 0), + }, + .off_val = 0x2, + .on_val = 0x0, + }, + .off_canc = { + .addr = 0x61, + .mask = BIT(1), + }, + .bdu = { + .addr = 0x62, + .mask = BIT(4), + }, + .out = { + .addr = 0x68, + .len = 6, + }, + }, +}; + +static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw) +{ + struct st_lsm6dsx_sensor *sensor; + + sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); + msleep((2000U / sensor->odr) + 1); +} + +/** + * st_lsm6dsx_shub_read_reg - read i2c controller register + * + * Read st_lsm6dsx i2c controller register + */ +static int st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 addr, + u8 *data, int len) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + int err; + + mutex_lock(&hw->page_lock); + + hub_settings = &hw->settings->shub_settings; + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + goto out; + + err = regmap_bulk_read(hw->regmap, addr, data, len); + + st_lsm6dsx_set_page(hw, false); +out: + mutex_unlock(&hw->page_lock); + + return err; +} + +/** + * st_lsm6dsx_shub_write_reg - write i2c controller register + * + * Write st_lsm6dsx i2c controller register + */ +static int st_lsm6dsx_shub_write_reg(struct st_lsm6dsx_hw *hw, u8 addr, + u8 *data, int len) +{ + int err; + + mutex_lock(&hw->page_lock); + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + goto out; + + err = regmap_bulk_write(hw->regmap, addr, data, len); + + st_lsm6dsx_set_page(hw, false); +out: + mutex_unlock(&hw->page_lock); + + return err; +} + +static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor, + bool enable) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct st_lsm6dsx_hw *hw = sensor->hw; + unsigned int data; + int err; + + /* enable acc sensor as trigger */ + err = st_lsm6dsx_sensor_set_enable(sensor, enable); + if (err < 0) + return err; + + mutex_lock(&hw->page_lock); + + hub_settings = &hw->settings->shub_settings; + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + goto out; + + data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask); + err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr, + hub_settings->master_en.mask, data); + + st_lsm6dsx_set_page(hw, false); +out: + mutex_unlock(&hw->page_lock); + + return err; +} + +/** + * st_lsm6dsx_shub_read - read data from slave device register + * + * Read data from slave device register. SLV0 is used for + * one-shot read operation + */ +static int +st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr, + u8 *data, int len) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct st_lsm6dsx_hw *hw = sensor->hw; + u8 config[3], slv_addr; + int err; + + hub_settings = &hw->settings->shub_settings; + slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); + + config[0] = (sensor->ext_info.addr << 1) | 1; + config[1] = addr; + config[2] = len & ST_LS6DSX_READ_OP_MASK; + + err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); + if (err < 0) + return err; + + err = st_lsm6dsx_shub_master_enable(sensor, true); + if (err < 0) + return err; + + st_lsm6dsx_shub_wait_complete(hw); + + err = st_lsm6dsx_shub_read_reg(hw, hub_settings->shub_out, data, + len & ST_LS6DSX_READ_OP_MASK); + + st_lsm6dsx_shub_master_enable(sensor, false); + + memset(config, 0, sizeof(config)); + return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); +} + +/** + * st_lsm6dsx_shub_write - write data to slave device register + * + * Write data from slave device register. SLV0 is used for + * one-shot write operation + */ +static int +st_lsm6dsx_shub_write(struct st_lsm6dsx_sensor *sensor, u8 addr, + u8 *data, int len) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct st_lsm6dsx_hw *hw = sensor->hw; + u8 config[2], slv_addr; + int err, i; + + hub_settings = &hw->settings->shub_settings; + slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); + config[0] = sensor->ext_info.addr << 1; + for (i = 0 ; i < len; i++) { + config[1] = addr + i; + + err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); + if (err < 0) + return err; + + err = st_lsm6dsx_shub_write_reg(hw, hub_settings->dw_slv0_addr, + &data[i], 1); + if (err < 0) + return err; + + err = st_lsm6dsx_shub_master_enable(sensor, true); + if (err < 0) + return err; + + st_lsm6dsx_shub_wait_complete(hw); + + st_lsm6dsx_shub_master_enable(sensor, false); + } + + memset(config, 0, sizeof(config)); + return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, sizeof(config)); +} + +static int +st_lsm6dsx_shub_write_with_mask(struct st_lsm6dsx_sensor *sensor, + u8 addr, u8 mask, u8 val) +{ + int err; + u8 data; + + err = st_lsm6dsx_shub_read(sensor, addr, &data, sizeof(data)); + if (err < 0) + return err; + + data = ((data & ~mask) | (val << __ffs(mask) & mask)); + + return st_lsm6dsx_shub_write(sensor, addr, &data, sizeof(data)); +} + +static int +st_lsm6dsx_shub_get_odr_val(struct st_lsm6dsx_sensor *sensor, + u16 odr, u16 *val) +{ + const struct st_lsm6dsx_ext_dev_settings *settings; + int i; + + settings = sensor->ext_info.settings; + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) + if (settings->odr_table.odr_avl[i].hz == odr) + break; + + if (i == ST_LSM6DSX_ODR_LIST_SIZE) + return -EINVAL; + + *val = settings->odr_table.odr_avl[i].val; + return 0; +} + +static int +st_lsm6dsx_shub_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr) +{ + const struct st_lsm6dsx_ext_dev_settings *settings; + u16 val; + int err; + + err = st_lsm6dsx_shub_get_odr_val(sensor, odr, &val); + if (err < 0) + return err; + + settings = sensor->ext_info.settings; + return st_lsm6dsx_shub_write_with_mask(sensor, + settings->odr_table.reg.addr, + settings->odr_table.reg.mask, + val); +} + +int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable) +{ + const struct st_lsm6dsx_ext_dev_settings *settings; + int err; + + settings = sensor->ext_info.settings; + if (enable) { + err = st_lsm6dsx_shub_set_odr(sensor, sensor->odr); + if (err < 0) + return err; + } else { + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->odr_table.reg.addr, + settings->odr_table.reg.mask, 0); + if (err < 0) + return err; + } + + if (settings->pwr_table.reg.addr) { + u8 val; + + val = enable ? settings->pwr_table.on_val + : settings->pwr_table.off_val; + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->pwr_table.reg.addr, + settings->pwr_table.reg.mask, val); + if (err < 0) + return err; + } + + return st_lsm6dsx_shub_master_enable(sensor, enable); +} + +static int +st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor, + struct iio_chan_spec const *ch, + int *val) +{ + int err, delay, len = ch->scan_type.realbits >> 3; + __le32 data; + + err = st_lsm6dsx_shub_set_enable(sensor, true); + if (err < 0) + return err; + + delay = 1000000 / sensor->odr; + usleep_range(delay, 2 * delay); + + err = st_lsm6dsx_shub_read(sensor, ch->address, (u8 *)&data, len); + if (err < 0) + return err; + + st_lsm6dsx_shub_set_enable(sensor, false); + + switch (len) { + case 2: + *val = (s16)le16_to_cpu(data); + break; + default: + return -EINVAL; + } + + return IIO_VAL_INT; +} + +static int +st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *ch, + int *val, int *val2, long mask) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(iio_dev); + if (ret) + break; + + ret = st_lsm6dsx_shub_read_oneshot(sensor, ch, val); + iio_device_release_direct_mode(iio_dev); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = sensor->odr; + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = sensor->gain; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int +st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + int err; + + err = iio_device_claim_direct_mode(iio_dev); + if (err) + return err; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: { + u16 data; + + err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data); + if (!err) + sensor->odr = val; + break; + } + default: + err = -EINVAL; + break; + } + + iio_device_release_direct_mode(iio_dev); + + return err; +} + +static ssize_t +st_lsm6dsx_shub_sampling_freq_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); + const struct st_lsm6dsx_ext_dev_settings *settings; + int i, len = 0; + + settings = sensor->ext_info.settings; + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) { + u16 val = settings->odr_table.odr_avl[i].hz; + + if (val > 0) + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", + val); + } + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t st_lsm6dsx_shub_scale_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); + const struct st_lsm6dsx_ext_dev_settings *settings; + int i, len = 0; + + settings = sensor->ext_info.settings; + for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) { + u16 val = settings->fs_table.fs_avl[i].gain; + + if (val > 0) + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", + val); + } + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_shub_sampling_freq_avail); +static IIO_DEVICE_ATTR(in_scale_available, 0444, + st_lsm6dsx_shub_scale_avail, NULL, 0); +static struct attribute *st_lsm6dsx_ext_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group st_lsm6dsx_ext_attribute_group = { + .attrs = st_lsm6dsx_ext_attributes, +}; + +static const struct iio_info st_lsm6dsx_ext_info = { + .attrs = &st_lsm6dsx_ext_attribute_group, + .read_raw = st_lsm6dsx_shub_read_raw, + .write_raw = st_lsm6dsx_shub_write_raw, + .hwfifo_set_watermark = st_lsm6dsx_set_watermark, +}; + +static struct iio_dev * +st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw, + enum st_lsm6dsx_sensor_id id, + const struct st_lsm6dsx_ext_dev_settings *info, + u8 i2c_addr, const char *name) +{ + struct iio_chan_spec *ext_channels; + struct st_lsm6dsx_sensor *sensor; + struct iio_dev *iio_dev; + + iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor)); + if (!iio_dev) + return NULL; + + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->dev.parent = hw->dev; + iio_dev->info = &st_lsm6dsx_ext_info; + + sensor = iio_priv(iio_dev); + sensor->id = id; + sensor->hw = hw; + sensor->odr = info->odr_table.odr_avl[0].hz; + sensor->gain = info->fs_table.fs_avl[0].gain; + sensor->ext_info.settings = info; + sensor->ext_info.addr = i2c_addr; + sensor->watermark = 1; + + switch (info->id) { + case ST_LSM6DSX_ID_MAGN: { + const struct iio_chan_spec magn_channels[] = { + ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr, + IIO_MOD_X, 0), + ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 2, + IIO_MOD_Y, 1), + ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 4, + IIO_MOD_Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), + }; + + ext_channels = devm_kzalloc(hw->dev, sizeof(magn_channels), + GFP_KERNEL); + if (!ext_channels) + return NULL; + + memcpy(ext_channels, magn_channels, sizeof(magn_channels)); + iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks; + iio_dev->channels = ext_channels; + iio_dev->num_channels = ARRAY_SIZE(magn_channels); + + scnprintf(sensor->name, sizeof(sensor->name), "%s_magn", + name); + break; + } + default: + return NULL; + } + iio_dev->name = sensor->name; + + return iio_dev; +} + +static int st_lsm6dsx_shub_init_device(struct st_lsm6dsx_sensor *sensor) +{ + const struct st_lsm6dsx_ext_dev_settings *settings; + int err; + + settings = sensor->ext_info.settings; + if (settings->bdu.addr) { + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->bdu.addr, + settings->bdu.mask, 1); + if (err < 0) + return err; + } + + if (settings->temp_comp.addr) { + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->temp_comp.addr, + settings->temp_comp.mask, 1); + if (err < 0) + return err; + } + + if (settings->off_canc.addr) { + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->off_canc.addr, + settings->off_canc.mask, 1); + if (err < 0) + return err; + } + + return 0; +} + +static int +st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr, + const struct st_lsm6dsx_ext_dev_settings *settings) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct st_lsm6dsx_sensor *sensor; + u8 config[3], data, slv_addr; + bool found = false; + int i, err; + + hub_settings = &hw->settings->shub_settings; + slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); + sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); + + for (i = 0; i < ARRAY_SIZE(settings->i2c_addr); i++) { + if (!settings->i2c_addr[i]) + continue; + + /* read wai slave register */ + config[0] = (settings->i2c_addr[i] << 1) | 0x1; + config[1] = settings->wai.addr; + config[2] = 0x1; + + err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); + if (err < 0) + return err; + + err = st_lsm6dsx_shub_master_enable(sensor, true); + if (err < 0) + return err; + + st_lsm6dsx_shub_wait_complete(hw); + + err = st_lsm6dsx_shub_read_reg(hw, + hub_settings->shub_out, + &data, sizeof(data)); + + st_lsm6dsx_shub_master_enable(sensor, false); + + if (err < 0) + return err; + + if (data != settings->wai.val) + continue; + + *i2c_addr = settings->i2c_addr[i]; + found = true; + break; + } + + /* reset SLV0 channel */ + memset(config, 0, sizeof(config)); + err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); + if (err < 0) + return err; + + return found ? 0 : -ENODEV; +} + +int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name) +{ + enum st_lsm6dsx_sensor_id id = ST_LSM6DSX_ID_EXT0; + struct st_lsm6dsx_sensor *sensor; + int err, i, num_ext_dev = 0; + u8 i2c_addr = 0; + + for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_ext_dev_table); i++) { + err = st_lsm6dsx_shub_check_wai(hw, &i2c_addr, + &st_lsm6dsx_ext_dev_table[i]); + if (err == -ENODEV) + continue; + else if (err < 0) + return err; + + hw->iio_devs[id] = st_lsm6dsx_shub_alloc_iiodev(hw, id, + &st_lsm6dsx_ext_dev_table[i], + i2c_addr, name); + if (!hw->iio_devs[id]) + return -ENOMEM; + + sensor = iio_priv(hw->iio_devs[id]); + err = st_lsm6dsx_shub_init_device(sensor); + if (err < 0) + return err; + + if (++num_ext_dev >= ST_LSM6DSX_MAX_SLV_NUM) + break; + id++; + } + + return 0; +} diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h index f8274b0c6888..728193111c2f 100644 --- a/include/linux/platform_data/st_sensors_pdata.h +++ b/include/linux/platform_data/st_sensors_pdata.h @@ -18,11 +18,13 @@ * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). * @open_drain: set the interrupt line to be open drain if possible. * @spi_3wire: enable spi-3wire mode. + * @pullups: enable/disable i2c controller pullup resistors. */ struct st_sensors_platform_data { u8 drdy_int_pin; bool open_drain; bool spi_3wire; + bool pullups; }; #endif /* ST_SENSORS_PDATA_H */