| Message ID | d16e2d1967e46bb2b1024b6d23bc4889da77dc6b.1630523106.git.lucas.p.stankus@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | iio: accel: Add support for ADXL313 accelerometer | expand |
On Wed, 1 Sep 2021 16:14:54 -0300 Lucas Stankus <lucas.p.stankus@gmail.com> wrote: > ADXL313 is a small, thin, low power, 3-axis accelerometer with high > resolution measurement up to +/-4g. It includes an integrated 32-level > FIFO and has activity and inactivity sensing capabilities. > > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf > Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com> > Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> > Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Nice work. Series applied to the togreg branch of iio.git and pushed out as testing for 0-day to see if it can find anything we missed. One trivial tweak to fix CHECK drivers/iio/accel/adxl313_core.c drivers/iio/accel/adxl313_core.c:17:27: warning: symbol 'adxl313_readable_reg_range' was not declared. Should it be static? drivers/iio/accel/adxl313_core.c:31:27: warning: symbol 'adxl313_writable_reg_range' was not declared. Should it be static? CHECK drivers/iio/accel/adxl313_spi.c Thanks, Jonathan > --- > MAINTAINERS | 6 + > drivers/iio/accel/Kconfig | 29 +++ > drivers/iio/accel/Makefile | 3 + > drivers/iio/accel/adxl313.h | 54 +++++ > drivers/iio/accel/adxl313_core.c | 332 +++++++++++++++++++++++++++++++ > drivers/iio/accel/adxl313_i2c.c | 66 ++++++ > drivers/iio/accel/adxl313_spi.c | 92 +++++++++ > 7 files changed, 582 insertions(+) > create mode 100644 drivers/iio/accel/adxl313.h > create mode 100644 drivers/iio/accel/adxl313_core.c > create mode 100644 drivers/iio/accel/adxl313_i2c.c > create mode 100644 drivers/iio/accel/adxl313_spi.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 212bad85e07a..a674f671ecb3 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -591,6 +591,12 @@ L: platform-driver-x86@vger.kernel.org > S: Maintained > F: drivers/platform/x86/adv_swbutton.c > > +ADXL313 THREE-AXIS DIGITAL ACCELEROMETER DRIVER > +M: Lucas Stankus <lucas.p.stankus@gmail.com> > +S: Supported > +F: Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml > +F: drivers/iio/accel/adxl313* > + > ADXL34X THREE-AXIS DIGITAL ACCELEROMETER DRIVER (ADXL345/ADXL346) > M: Michael Hennerich <michael.hennerich@analog.com> > S: Supported > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > index 05a3504119a8..f1bc18f19342 100644 > --- a/drivers/iio/accel/Kconfig > +++ b/drivers/iio/accel/Kconfig > @@ -30,6 +30,35 @@ config ADIS16209 > To compile this driver as a module, say M here: the module will be > called adis16209. > > +config ADXL313 > + tristate > + > +config ADXL313_I2C > + tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer I2C Driver" > + depends on I2C > + select ADXL313 > + select REGMAP_I2C > + help > + Say Y here if you want to build i2c support for the Analog Devices > + ADXL313 3-axis digital accelerometer. > + > + To compile this driver as a module, choose M here: the module > + will be called adxl313_i2c and you will also get adxl313_core > + for the core module. > + > +config ADXL313_SPI > + tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer SPI Driver" > + depends on SPI > + select ADXL313 > + select REGMAP_SPI > + help > + Say Y here if you want to build spi support for the Analog Devices > + ADXL313 3-axis digital accelerometer. > + > + To compile this driver as a module, choose M here: the module > + will be called adxl313_spi and you will also get adxl313_core > + for the core module. > + > config ADXL345 > tristate > > diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile > index 7f4d97bf41f9..d03e2f6bba08 100644 > --- a/drivers/iio/accel/Makefile > +++ b/drivers/iio/accel/Makefile > @@ -6,6 +6,9 @@ > # When adding new entries keep the list in alphabetical order > obj-$(CONFIG_ADIS16201) += adis16201.o > obj-$(CONFIG_ADIS16209) += adis16209.o > +obj-$(CONFIG_ADXL313) += adxl313_core.o > +obj-$(CONFIG_ADXL313_I2C) += adxl313_i2c.o > +obj-$(CONFIG_ADXL313_SPI) += adxl313_spi.o > obj-$(CONFIG_ADXL345) += adxl345_core.o > obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o > obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o > diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h > new file mode 100644 > index 000000000000..4415f2fc07e1 > --- /dev/null > +++ b/drivers/iio/accel/adxl313.h > @@ -0,0 +1,54 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * ADXL313 3-Axis Digital Accelerometer > + * > + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@gmail.com> > + */ > + > +#ifndef _ADXL313_H_ > +#define _ADXL313_H_ > + > +/* ADXL313 register definitions */ > +#define ADXL313_REG_DEVID0 0x00 > +#define ADXL313_REG_DEVID1 0x01 > +#define ADXL313_REG_PARTID 0x02 > +#define ADXL313_REG_XID 0x04 > +#define ADXL313_REG_SOFT_RESET 0x18 > +#define ADXL313_REG_OFS_AXIS(index) (0x1E + (index)) > +#define ADXL313_REG_THRESH_ACT 0x24 > +#define ADXL313_REG_ACT_INACT_CTL 0x27 > +#define ADXL313_REG_BW_RATE 0x2C > +#define ADXL313_REG_POWER_CTL 0x2D > +#define ADXL313_REG_INT_MAP 0x2F > +#define ADXL313_REG_DATA_FORMAT 0x31 > +#define ADXL313_REG_DATA_AXIS(index) (0x32 + ((index) * 2)) > +#define ADXL313_REG_FIFO_CTL 0x38 > +#define ADXL313_REG_FIFO_STATUS 0x39 > + > +#define ADXL313_DEVID0 0xAD > +#define ADXL313_DEVID1 0x1D > +#define ADXL313_PARTID 0xCB > +#define ADXL313_SOFT_RESET 0x52 > + > +#define ADXL313_RATE_MSK GENMASK(3, 0) > +#define ADXL313_RATE_BASE 6 > + > +#define ADXL313_POWER_CTL_MSK GENMASK(3, 2) > +#define ADXL313_MEASUREMENT_MODE BIT(3) > + > +#define ADXL313_RANGE_MSK GENMASK(1, 0) > +#define ADXL313_RANGE_4G 3 > + > +#define ADXL313_FULL_RES BIT(3) > +#define ADXL313_SPI_3WIRE BIT(6) > +#define ADXL313_I2C_DISABLE BIT(6) > + > +extern const struct regmap_access_table adxl313_readable_regs_table; > + > +extern const struct regmap_access_table adxl313_writable_regs_table; > + > +int adxl313_core_probe(struct device *dev, > + struct regmap *regmap, > + const char *name, > + int (*setup)(struct device *, struct regmap *)); > +#endif /* _ADXL313_H_ */ > diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c > new file mode 100644 > index 000000000000..3fbb546d05cb > --- /dev/null > +++ b/drivers/iio/accel/adxl313_core.c > @@ -0,0 +1,332 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * ADXL313 3-Axis Digital Accelerometer > + * > + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@gmail.com> > + * > + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf > + */ > + > +#include <linux/bitfield.h> > +#include <linux/iio/iio.h> > +#include <linux/module.h> > +#include <linux/regmap.h> > + > +#include "adxl313.h" > + > +const struct regmap_range adxl313_readable_reg_range[] = { > + regmap_reg_range(ADXL313_REG_DEVID0, ADXL313_REG_XID), > + regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET), > + regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)), > + regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL), > + regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_FIFO_STATUS), > +}; > + > +const struct regmap_access_table adxl313_readable_regs_table = { > + .yes_ranges = adxl313_readable_reg_range, > + .n_yes_ranges = ARRAY_SIZE(adxl313_readable_reg_range), > +}; > +EXPORT_SYMBOL_GPL(adxl313_readable_regs_table); > + > +const struct regmap_range adxl313_writable_reg_range[] = { > + regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET), > + regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)), > + regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL), > + regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_INT_MAP), > + regmap_reg_range(ADXL313_REG_DATA_FORMAT, ADXL313_REG_DATA_FORMAT), > + regmap_reg_range(ADXL313_REG_FIFO_CTL, ADXL313_REG_FIFO_CTL), > +}; > + > +const struct regmap_access_table adxl313_writable_regs_table = { > + .yes_ranges = adxl313_writable_reg_range, > + .n_yes_ranges = ARRAY_SIZE(adxl313_writable_reg_range), > +}; > +EXPORT_SYMBOL_GPL(adxl313_writable_regs_table); > + > +struct adxl313_data { > + struct regmap *regmap; > + struct mutex lock; /* lock to protect transf_buf */ > + __le16 transf_buf ____cacheline_aligned; > +}; > + > +static const int adxl313_odr_freqs[][2] = { > + [0] = { 6, 250000 }, > + [1] = { 12, 500000 }, > + [2] = { 25, 0 }, > + [3] = { 50, 0 }, > + [4] = { 100, 0 }, > + [5] = { 200, 0 }, > + [6] = { 400, 0 }, > + [7] = { 800, 0 }, > + [8] = { 1600, 0 }, > + [9] = { 3200, 0 }, > +}; > + > +#define ADXL313_ACCEL_CHANNEL(index, axis) { \ > + .type = IIO_ACCEL, \ > + .address = index, \ > + .modified = 1, \ > + .channel2 = IIO_MOD_##axis, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > + BIT(IIO_CHAN_INFO_CALIBBIAS), \ > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ > + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ > + .info_mask_shared_by_type_available = \ > + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ > + .scan_type = { \ > + .realbits = 13, \ > + }, \ > +} > + > +static const struct iio_chan_spec adxl313_channels[] = { > + ADXL313_ACCEL_CHANNEL(0, X), > + ADXL313_ACCEL_CHANNEL(1, Y), > + ADXL313_ACCEL_CHANNEL(2, Z), > +}; > + > +static int adxl313_set_odr(struct adxl313_data *data, > + unsigned int freq1, unsigned int freq2) > +{ > + unsigned int i; > + > + for (i = 0; i < ARRAY_SIZE(adxl313_odr_freqs); i++) { > + if (adxl313_odr_freqs[i][0] == freq1 && > + adxl313_odr_freqs[i][1] == freq2) > + break; > + } > + > + if (i == ARRAY_SIZE(adxl313_odr_freqs)) > + return -EINVAL; > + > + return regmap_update_bits(data->regmap, ADXL313_REG_BW_RATE, > + ADXL313_RATE_MSK, > + FIELD_PREP(ADXL313_RATE_MSK, ADXL313_RATE_BASE + i)); > +} > + > +static int adxl313_read_axis(struct adxl313_data *data, > + struct iio_chan_spec const *chan) > +{ > + int ret; > + > + mutex_lock(&data->lock); > + > + ret = regmap_bulk_read(data->regmap, > + ADXL313_REG_DATA_AXIS(chan->address), > + &data->transf_buf, sizeof(data->transf_buf)); > + if (ret) > + goto unlock_ret; > + > + ret = le16_to_cpu(data->transf_buf); > + > +unlock_ret: > + mutex_unlock(&data->lock); > + return ret; > +} > + > +static int adxl313_read_freq_avail(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + const int **vals, int *type, int *length, > + long mask) > +{ > + switch (mask) { > + case IIO_CHAN_INFO_SAMP_FREQ: > + *vals = (const int *)adxl313_odr_freqs; > + *length = ARRAY_SIZE(adxl313_odr_freqs) * 2; > + *type = IIO_VAL_INT_PLUS_MICRO; > + return IIO_AVAIL_LIST; > + default: > + return -EINVAL; > + } > +} > + > +static int adxl313_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct adxl313_data *data = iio_priv(indio_dev); > + unsigned int regval; > + int ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + ret = adxl313_read_axis(data, chan); > + if (ret < 0) > + return ret; > + > + *val = sign_extend32(ret, chan->scan_type.realbits - 1); > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_SCALE: > + /* > + * Scale for any g range is given in datasheet as > + * 1024 LSB/g = 0.0009765625 * 9.80665 = 0.009576806640625 m/s^2 > + */ > + *val = 0; > + *val2 = 9576806; > + return IIO_VAL_INT_PLUS_NANO; > + case IIO_CHAN_INFO_CALIBBIAS: > + ret = regmap_read(data->regmap, > + ADXL313_REG_OFS_AXIS(chan->address), ®val); > + if (ret) > + return ret; > + > + /* > + * 8-bit resolution at +/- 0.5g, that is 4x accel data scale > + * factor at full resolution > + */ > + *val = sign_extend32(regval, 7) * 4; > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_SAMP_FREQ: > + ret = regmap_read(data->regmap, ADXL313_REG_BW_RATE, ®val); > + if (ret) > + return ret; > + > + ret = FIELD_GET(ADXL313_RATE_MSK, regval) - ADXL313_RATE_BASE; > + *val = adxl313_odr_freqs[ret][0]; > + *val2 = adxl313_odr_freqs[ret][1]; > + return IIO_VAL_INT_PLUS_MICRO; > + default: > + return -EINVAL; > + } > +} > + > +static int adxl313_write_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int val, int val2, long mask) > +{ > + struct adxl313_data *data = iio_priv(indio_dev); > + > + switch (mask) { > + case IIO_CHAN_INFO_CALIBBIAS: > + /* > + * 8-bit resolution at +/- 0.5g, that is 4x accel data scale > + * factor at full resolution > + */ > + if (clamp_val(val, -128 * 4, 127 * 4) != val) > + return -EINVAL; > + > + return regmap_write(data->regmap, > + ADXL313_REG_OFS_AXIS(chan->address), > + val / 4); > + case IIO_CHAN_INFO_SAMP_FREQ: > + return adxl313_set_odr(data, val, val2); > + default: > + return -EINVAL; > + } > +} > + > +static const struct iio_info adxl313_info = { > + .read_raw = adxl313_read_raw, > + .write_raw = adxl313_write_raw, > + .read_avail = adxl313_read_freq_avail, > +}; > + > +static int adxl313_setup(struct device *dev, struct adxl313_data *data, > + int (*setup)(struct device *, struct regmap *)) > +{ > + unsigned int regval; > + int ret; > + > + /* Ensures the device is in a consistent state after start up */ > + ret = regmap_write(data->regmap, ADXL313_REG_SOFT_RESET, > + ADXL313_SOFT_RESET); > + if (ret) > + return ret; > + > + if (setup) { > + ret = setup(dev, data->regmap); > + if (ret) > + return ret; > + } > + > + ret = regmap_read(data->regmap, ADXL313_REG_DEVID0, ®val); > + if (ret) > + return ret; > + > + if (regval != ADXL313_DEVID0) { > + dev_err(dev, "Invalid manufacturer ID: 0x%02x\n", regval); > + return -ENODEV; > + } > + > + ret = regmap_read(data->regmap, ADXL313_REG_DEVID1, ®val); > + if (ret) > + return ret; > + > + if (regval != ADXL313_DEVID1) { > + dev_err(dev, "Invalid mems ID: 0x%02x\n", regval); > + return -ENODEV; > + } > + > + ret = regmap_read(data->regmap, ADXL313_REG_PARTID, ®val); > + if (ret) > + return ret; > + > + if (regval != ADXL313_PARTID) { > + dev_err(dev, "Invalid device ID: 0x%02x\n", regval); > + return -ENODEV; > + } > + > + /* Sets the range to +/- 4g */ > + ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT, > + ADXL313_RANGE_MSK, > + FIELD_PREP(ADXL313_RANGE_MSK, ADXL313_RANGE_4G)); > + if (ret) > + return ret; > + > + /* Enables full resolution */ > + ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT, > + ADXL313_FULL_RES, ADXL313_FULL_RES); > + if (ret) > + return ret; > + > + /* Enables measurement mode */ > + return regmap_update_bits(data->regmap, ADXL313_REG_POWER_CTL, > + ADXL313_POWER_CTL_MSK, > + ADXL313_MEASUREMENT_MODE); > +} > + > +/** > + * adxl313_core_probe() - probe and setup for adxl313 accelerometer > + * @dev: Driver model representation of the device > + * @regmap: Register map of the device > + * @name: Device name buffer reference > + * @setup: Setup routine to be executed right before the standard device > + * setup, can also be set to NULL if not required > + * > + * Return: 0 on success, negative errno on error cases > + */ > +int adxl313_core_probe(struct device *dev, > + struct regmap *regmap, > + const char *name, > + int (*setup)(struct device *, struct regmap *)) > +{ > + struct adxl313_data *data; > + struct iio_dev *indio_dev; > + int ret; > + > + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); > + if (!indio_dev) > + return -ENOMEM; > + > + data = iio_priv(indio_dev); > + data->regmap = regmap; > + mutex_init(&data->lock); > + > + indio_dev->name = name; > + indio_dev->info = &adxl313_info; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->channels = adxl313_channels; > + indio_dev->num_channels = ARRAY_SIZE(adxl313_channels); > + > + ret = adxl313_setup(dev, data, setup); > + if (ret) { > + dev_err(dev, "ADXL313 setup failed\n"); > + return ret; > + } > + > + return devm_iio_device_register(dev, indio_dev); > +} > +EXPORT_SYMBOL_GPL(adxl313_core_probe); > + > +MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@gmail.com>"); > +MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer core driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/iio/accel/adxl313_i2c.c b/drivers/iio/accel/adxl313_i2c.c > new file mode 100644 > index 000000000000..82e9fb2db1e6 > --- /dev/null > +++ b/drivers/iio/accel/adxl313_i2c.c > @@ -0,0 +1,66 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * ADXL313 3-Axis Digital Accelerometer > + * > + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@gmail.com> > + * > + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf > + */ > + > +#include <linux/i2c.h> > +#include <linux/mod_devicetable.h> > +#include <linux/module.h> > +#include <linux/regmap.h> > + > +#include "adxl313.h" > + > +static const struct regmap_config adxl313_i2c_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + .rd_table = &adxl313_readable_regs_table, > + .wr_table = &adxl313_writable_regs_table, > + .max_register = 0x39, > +}; > + > +static int adxl313_i2c_probe(struct i2c_client *client) > +{ > + struct regmap *regmap; > + > + regmap = devm_regmap_init_i2c(client, &adxl313_i2c_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&client->dev, "Error initializing i2c regmap: %ld\n", > + PTR_ERR(regmap)); > + return PTR_ERR(regmap); > + } > + > + return adxl313_core_probe(&client->dev, regmap, client->name, NULL); > +} > + > +static const struct i2c_device_id adxl313_i2c_id[] = { > + { "adxl313" }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(i2c, adxl313_i2c_id); > + > +static const struct of_device_id adxl313_of_match[] = { > + { .compatible = "adi,adxl313" }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(of, adxl313_of_match); > + > +static struct i2c_driver adxl313_i2c_driver = { > + .driver = { > + .name = "adxl313_i2c", > + .of_match_table = adxl313_of_match, > + }, > + .probe_new = adxl313_i2c_probe, > + .id_table = adxl313_i2c_id, > +}; > + > +module_i2c_driver(adxl313_i2c_driver); > + > +MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@gmail.com>"); > +MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer I2C driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/iio/accel/adxl313_spi.c b/drivers/iio/accel/adxl313_spi.c > new file mode 100644 > index 000000000000..a6162f36ef52 > --- /dev/null > +++ b/drivers/iio/accel/adxl313_spi.c > @@ -0,0 +1,92 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * ADXL313 3-Axis Digital Accelerometer > + * > + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@gmail.com> > + * > + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf > + */ > + > +#include <linux/mod_devicetable.h> > +#include <linux/module.h> > +#include <linux/regmap.h> > +#include <linux/spi/spi.h> > + > +#include "adxl313.h" > + > +static const struct regmap_config adxl313_spi_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + .rd_table = &adxl313_readable_regs_table, > + .wr_table = &adxl313_writable_regs_table, > + .max_register = 0x39, > + /* Setting bits 7 and 6 enables multiple-byte read */ > + .read_flag_mask = BIT(7) | BIT(6), > +}; > + > +static int adxl313_spi_setup(struct device *dev, struct regmap *regmap) > +{ > + struct spi_device *spi = container_of(dev, struct spi_device, dev); > + int ret; > + > + if (spi->mode & SPI_3WIRE) { > + ret = regmap_write(regmap, ADXL313_REG_DATA_FORMAT, > + ADXL313_SPI_3WIRE); > + if (ret) > + return ret; > + } > + > + return regmap_update_bits(regmap, ADXL313_REG_POWER_CTL, > + ADXL313_I2C_DISABLE, ADXL313_I2C_DISABLE); > +} > + > +static int adxl313_spi_probe(struct spi_device *spi) > +{ > + const struct spi_device_id *id = spi_get_device_id(spi); > + struct regmap *regmap; > + int ret; > + > + spi->mode |= SPI_MODE_3; > + ret = spi_setup(spi); > + if (ret) > + return ret; > + > + regmap = devm_regmap_init_spi(spi, &adxl313_spi_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&spi->dev, "Error initializing spi regmap: %ld\n", > + PTR_ERR(regmap)); > + return PTR_ERR(regmap); > + } > + > + return adxl313_core_probe(&spi->dev, regmap, id->name, > + &adxl313_spi_setup); > +} > + > +static const struct spi_device_id adxl313_spi_id[] = { > + { "adxl313" }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(spi, adxl313_spi_id); > + > +static const struct of_device_id adxl313_of_match[] = { > + { .compatible = "adi,adxl313" }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(of, adxl313_of_match); > + > +static struct spi_driver adxl313_spi_driver = { > + .driver = { > + .name = "adxl313_spi", > + .of_match_table = adxl313_of_match, > + }, > + .probe = adxl313_spi_probe, > + .id_table = adxl313_spi_id, > +}; > + > +module_spi_driver(adxl313_spi_driver); > + > +MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@gmail.com>"); > +MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer SPI driver"); > +MODULE_LICENSE("GPL v2");
diff --git a/MAINTAINERS b/MAINTAINERS index 212bad85e07a..a674f671ecb3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -591,6 +591,12 @@ L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/adv_swbutton.c +ADXL313 THREE-AXIS DIGITAL ACCELEROMETER DRIVER +M: Lucas Stankus <lucas.p.stankus@gmail.com> +S: Supported +F: Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml +F: drivers/iio/accel/adxl313* + ADXL34X THREE-AXIS DIGITAL ACCELEROMETER DRIVER (ADXL345/ADXL346) M: Michael Hennerich <michael.hennerich@analog.com> S: Supported diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 05a3504119a8..f1bc18f19342 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -30,6 +30,35 @@ config ADIS16209 To compile this driver as a module, say M here: the module will be called adis16209. +config ADXL313 + tristate + +config ADXL313_I2C + tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer I2C Driver" + depends on I2C + select ADXL313 + select REGMAP_I2C + help + Say Y here if you want to build i2c support for the Analog Devices + ADXL313 3-axis digital accelerometer. + + To compile this driver as a module, choose M here: the module + will be called adxl313_i2c and you will also get adxl313_core + for the core module. + +config ADXL313_SPI + tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer SPI Driver" + depends on SPI + select ADXL313 + select REGMAP_SPI + help + Say Y here if you want to build spi support for the Analog Devices + ADXL313 3-axis digital accelerometer. + + To compile this driver as a module, choose M here: the module + will be called adxl313_spi and you will also get adxl313_core + for the core module. + config ADXL345 tristate diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 7f4d97bf41f9..d03e2f6bba08 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -6,6 +6,9 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_ADIS16201) += adis16201.o obj-$(CONFIG_ADIS16209) += adis16209.o +obj-$(CONFIG_ADXL313) += adxl313_core.o +obj-$(CONFIG_ADXL313_I2C) += adxl313_i2c.o +obj-$(CONFIG_ADXL313_SPI) += adxl313_spi.o obj-$(CONFIG_ADXL345) += adxl345_core.o obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h new file mode 100644 index 000000000000..4415f2fc07e1 --- /dev/null +++ b/drivers/iio/accel/adxl313.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * ADXL313 3-Axis Digital Accelerometer + * + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@gmail.com> + */ + +#ifndef _ADXL313_H_ +#define _ADXL313_H_ + +/* ADXL313 register definitions */ +#define ADXL313_REG_DEVID0 0x00 +#define ADXL313_REG_DEVID1 0x01 +#define ADXL313_REG_PARTID 0x02 +#define ADXL313_REG_XID 0x04 +#define ADXL313_REG_SOFT_RESET 0x18 +#define ADXL313_REG_OFS_AXIS(index) (0x1E + (index)) +#define ADXL313_REG_THRESH_ACT 0x24 +#define ADXL313_REG_ACT_INACT_CTL 0x27 +#define ADXL313_REG_BW_RATE 0x2C +#define ADXL313_REG_POWER_CTL 0x2D +#define ADXL313_REG_INT_MAP 0x2F +#define ADXL313_REG_DATA_FORMAT 0x31 +#define ADXL313_REG_DATA_AXIS(index) (0x32 + ((index) * 2)) +#define ADXL313_REG_FIFO_CTL 0x38 +#define ADXL313_REG_FIFO_STATUS 0x39 + +#define ADXL313_DEVID0 0xAD +#define ADXL313_DEVID1 0x1D +#define ADXL313_PARTID 0xCB +#define ADXL313_SOFT_RESET 0x52 + +#define ADXL313_RATE_MSK GENMASK(3, 0) +#define ADXL313_RATE_BASE 6 + +#define ADXL313_POWER_CTL_MSK GENMASK(3, 2) +#define ADXL313_MEASUREMENT_MODE BIT(3) + +#define ADXL313_RANGE_MSK GENMASK(1, 0) +#define ADXL313_RANGE_4G 3 + +#define ADXL313_FULL_RES BIT(3) +#define ADXL313_SPI_3WIRE BIT(6) +#define ADXL313_I2C_DISABLE BIT(6) + +extern const struct regmap_access_table adxl313_readable_regs_table; + +extern const struct regmap_access_table adxl313_writable_regs_table; + +int adxl313_core_probe(struct device *dev, + struct regmap *regmap, + const char *name, + int (*setup)(struct device *, struct regmap *)); +#endif /* _ADXL313_H_ */ diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c new file mode 100644 index 000000000000..3fbb546d05cb --- /dev/null +++ b/drivers/iio/accel/adxl313_core.c @@ -0,0 +1,332 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ADXL313 3-Axis Digital Accelerometer + * + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@gmail.com> + * + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf + */ + +#include <linux/bitfield.h> +#include <linux/iio/iio.h> +#include <linux/module.h> +#include <linux/regmap.h> + +#include "adxl313.h" + +const struct regmap_range adxl313_readable_reg_range[] = { + regmap_reg_range(ADXL313_REG_DEVID0, ADXL313_REG_XID), + regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET), + regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)), + regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL), + regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_FIFO_STATUS), +}; + +const struct regmap_access_table adxl313_readable_regs_table = { + .yes_ranges = adxl313_readable_reg_range, + .n_yes_ranges = ARRAY_SIZE(adxl313_readable_reg_range), +}; +EXPORT_SYMBOL_GPL(adxl313_readable_regs_table); + +const struct regmap_range adxl313_writable_reg_range[] = { + regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET), + regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)), + regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL), + regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_INT_MAP), + regmap_reg_range(ADXL313_REG_DATA_FORMAT, ADXL313_REG_DATA_FORMAT), + regmap_reg_range(ADXL313_REG_FIFO_CTL, ADXL313_REG_FIFO_CTL), +}; + +const struct regmap_access_table adxl313_writable_regs_table = { + .yes_ranges = adxl313_writable_reg_range, + .n_yes_ranges = ARRAY_SIZE(adxl313_writable_reg_range), +}; +EXPORT_SYMBOL_GPL(adxl313_writable_regs_table); + +struct adxl313_data { + struct regmap *regmap; + struct mutex lock; /* lock to protect transf_buf */ + __le16 transf_buf ____cacheline_aligned; +}; + +static const int adxl313_odr_freqs[][2] = { + [0] = { 6, 250000 }, + [1] = { 12, 500000 }, + [2] = { 25, 0 }, + [3] = { 50, 0 }, + [4] = { 100, 0 }, + [5] = { 200, 0 }, + [6] = { 400, 0 }, + [7] = { 800, 0 }, + [8] = { 1600, 0 }, + [9] = { 3200, 0 }, +}; + +#define ADXL313_ACCEL_CHANNEL(index, axis) { \ + .type = IIO_ACCEL, \ + .address = index, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_CALIBBIAS), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_type_available = \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_type = { \ + .realbits = 13, \ + }, \ +} + +static const struct iio_chan_spec adxl313_channels[] = { + ADXL313_ACCEL_CHANNEL(0, X), + ADXL313_ACCEL_CHANNEL(1, Y), + ADXL313_ACCEL_CHANNEL(2, Z), +}; + +static int adxl313_set_odr(struct adxl313_data *data, + unsigned int freq1, unsigned int freq2) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(adxl313_odr_freqs); i++) { + if (adxl313_odr_freqs[i][0] == freq1 && + adxl313_odr_freqs[i][1] == freq2) + break; + } + + if (i == ARRAY_SIZE(adxl313_odr_freqs)) + return -EINVAL; + + return regmap_update_bits(data->regmap, ADXL313_REG_BW_RATE, + ADXL313_RATE_MSK, + FIELD_PREP(ADXL313_RATE_MSK, ADXL313_RATE_BASE + i)); +} + +static int adxl313_read_axis(struct adxl313_data *data, + struct iio_chan_spec const *chan) +{ + int ret; + + mutex_lock(&data->lock); + + ret = regmap_bulk_read(data->regmap, + ADXL313_REG_DATA_AXIS(chan->address), + &data->transf_buf, sizeof(data->transf_buf)); + if (ret) + goto unlock_ret; + + ret = le16_to_cpu(data->transf_buf); + +unlock_ret: + mutex_unlock(&data->lock); + return ret; +} + +static int adxl313_read_freq_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *vals = (const int *)adxl313_odr_freqs; + *length = ARRAY_SIZE(adxl313_odr_freqs) * 2; + *type = IIO_VAL_INT_PLUS_MICRO; + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static int adxl313_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct adxl313_data *data = iio_priv(indio_dev); + unsigned int regval; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = adxl313_read_axis(data, chan); + if (ret < 0) + return ret; + + *val = sign_extend32(ret, chan->scan_type.realbits - 1); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + /* + * Scale for any g range is given in datasheet as + * 1024 LSB/g = 0.0009765625 * 9.80665 = 0.009576806640625 m/s^2 + */ + *val = 0; + *val2 = 9576806; + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_CALIBBIAS: + ret = regmap_read(data->regmap, + ADXL313_REG_OFS_AXIS(chan->address), ®val); + if (ret) + return ret; + + /* + * 8-bit resolution at +/- 0.5g, that is 4x accel data scale + * factor at full resolution + */ + *val = sign_extend32(regval, 7) * 4; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = regmap_read(data->regmap, ADXL313_REG_BW_RATE, ®val); + if (ret) + return ret; + + ret = FIELD_GET(ADXL313_RATE_MSK, regval) - ADXL313_RATE_BASE; + *val = adxl313_odr_freqs[ret][0]; + *val2 = adxl313_odr_freqs[ret][1]; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int adxl313_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct adxl313_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_CALIBBIAS: + /* + * 8-bit resolution at +/- 0.5g, that is 4x accel data scale + * factor at full resolution + */ + if (clamp_val(val, -128 * 4, 127 * 4) != val) + return -EINVAL; + + return regmap_write(data->regmap, + ADXL313_REG_OFS_AXIS(chan->address), + val / 4); + case IIO_CHAN_INFO_SAMP_FREQ: + return adxl313_set_odr(data, val, val2); + default: + return -EINVAL; + } +} + +static const struct iio_info adxl313_info = { + .read_raw = adxl313_read_raw, + .write_raw = adxl313_write_raw, + .read_avail = adxl313_read_freq_avail, +}; + +static int adxl313_setup(struct device *dev, struct adxl313_data *data, + int (*setup)(struct device *, struct regmap *)) +{ + unsigned int regval; + int ret; + + /* Ensures the device is in a consistent state after start up */ + ret = regmap_write(data->regmap, ADXL313_REG_SOFT_RESET, + ADXL313_SOFT_RESET); + if (ret) + return ret; + + if (setup) { + ret = setup(dev, data->regmap); + if (ret) + return ret; + } + + ret = regmap_read(data->regmap, ADXL313_REG_DEVID0, ®val); + if (ret) + return ret; + + if (regval != ADXL313_DEVID0) { + dev_err(dev, "Invalid manufacturer ID: 0x%02x\n", regval); + return -ENODEV; + } + + ret = regmap_read(data->regmap, ADXL313_REG_DEVID1, ®val); + if (ret) + return ret; + + if (regval != ADXL313_DEVID1) { + dev_err(dev, "Invalid mems ID: 0x%02x\n", regval); + return -ENODEV; + } + + ret = regmap_read(data->regmap, ADXL313_REG_PARTID, ®val); + if (ret) + return ret; + + if (regval != ADXL313_PARTID) { + dev_err(dev, "Invalid device ID: 0x%02x\n", regval); + return -ENODEV; + } + + /* Sets the range to +/- 4g */ + ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT, + ADXL313_RANGE_MSK, + FIELD_PREP(ADXL313_RANGE_MSK, ADXL313_RANGE_4G)); + if (ret) + return ret; + + /* Enables full resolution */ + ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT, + ADXL313_FULL_RES, ADXL313_FULL_RES); + if (ret) + return ret; + + /* Enables measurement mode */ + return regmap_update_bits(data->regmap, ADXL313_REG_POWER_CTL, + ADXL313_POWER_CTL_MSK, + ADXL313_MEASUREMENT_MODE); +} + +/** + * adxl313_core_probe() - probe and setup for adxl313 accelerometer + * @dev: Driver model representation of the device + * @regmap: Register map of the device + * @name: Device name buffer reference + * @setup: Setup routine to be executed right before the standard device + * setup, can also be set to NULL if not required + * + * Return: 0 on success, negative errno on error cases + */ +int adxl313_core_probe(struct device *dev, + struct regmap *regmap, + const char *name, + int (*setup)(struct device *, struct regmap *)) +{ + struct adxl313_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->regmap = regmap; + mutex_init(&data->lock); + + indio_dev->name = name; + indio_dev->info = &adxl313_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = adxl313_channels; + indio_dev->num_channels = ARRAY_SIZE(adxl313_channels); + + ret = adxl313_setup(dev, data, setup); + if (ret) { + dev_err(dev, "ADXL313 setup failed\n"); + return ret; + } + + return devm_iio_device_register(dev, indio_dev); +} +EXPORT_SYMBOL_GPL(adxl313_core_probe); + +MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@gmail.com>"); +MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer core driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/accel/adxl313_i2c.c b/drivers/iio/accel/adxl313_i2c.c new file mode 100644 index 000000000000..82e9fb2db1e6 --- /dev/null +++ b/drivers/iio/accel/adxl313_i2c.c @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ADXL313 3-Axis Digital Accelerometer + * + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@gmail.com> + * + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf + */ + +#include <linux/i2c.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/regmap.h> + +#include "adxl313.h" + +static const struct regmap_config adxl313_i2c_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .rd_table = &adxl313_readable_regs_table, + .wr_table = &adxl313_writable_regs_table, + .max_register = 0x39, +}; + +static int adxl313_i2c_probe(struct i2c_client *client) +{ + struct regmap *regmap; + + regmap = devm_regmap_init_i2c(client, &adxl313_i2c_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Error initializing i2c regmap: %ld\n", + PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return adxl313_core_probe(&client->dev, regmap, client->name, NULL); +} + +static const struct i2c_device_id adxl313_i2c_id[] = { + { "adxl313" }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, adxl313_i2c_id); + +static const struct of_device_id adxl313_of_match[] = { + { .compatible = "adi,adxl313" }, + { } +}; + +MODULE_DEVICE_TABLE(of, adxl313_of_match); + +static struct i2c_driver adxl313_i2c_driver = { + .driver = { + .name = "adxl313_i2c", + .of_match_table = adxl313_of_match, + }, + .probe_new = adxl313_i2c_probe, + .id_table = adxl313_i2c_id, +}; + +module_i2c_driver(adxl313_i2c_driver); + +MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@gmail.com>"); +MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer I2C driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/accel/adxl313_spi.c b/drivers/iio/accel/adxl313_spi.c new file mode 100644 index 000000000000..a6162f36ef52 --- /dev/null +++ b/drivers/iio/accel/adxl313_spi.c @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ADXL313 3-Axis Digital Accelerometer + * + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@gmail.com> + * + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf + */ + +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> + +#include "adxl313.h" + +static const struct regmap_config adxl313_spi_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .rd_table = &adxl313_readable_regs_table, + .wr_table = &adxl313_writable_regs_table, + .max_register = 0x39, + /* Setting bits 7 and 6 enables multiple-byte read */ + .read_flag_mask = BIT(7) | BIT(6), +}; + +static int adxl313_spi_setup(struct device *dev, struct regmap *regmap) +{ + struct spi_device *spi = container_of(dev, struct spi_device, dev); + int ret; + + if (spi->mode & SPI_3WIRE) { + ret = regmap_write(regmap, ADXL313_REG_DATA_FORMAT, + ADXL313_SPI_3WIRE); + if (ret) + return ret; + } + + return regmap_update_bits(regmap, ADXL313_REG_POWER_CTL, + ADXL313_I2C_DISABLE, ADXL313_I2C_DISABLE); +} + +static int adxl313_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + struct regmap *regmap; + int ret; + + spi->mode |= SPI_MODE_3; + ret = spi_setup(spi); + if (ret) + return ret; + + regmap = devm_regmap_init_spi(spi, &adxl313_spi_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "Error initializing spi regmap: %ld\n", + PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return adxl313_core_probe(&spi->dev, regmap, id->name, + &adxl313_spi_setup); +} + +static const struct spi_device_id adxl313_spi_id[] = { + { "adxl313" }, + { } +}; + +MODULE_DEVICE_TABLE(spi, adxl313_spi_id); + +static const struct of_device_id adxl313_of_match[] = { + { .compatible = "adi,adxl313" }, + { } +}; + +MODULE_DEVICE_TABLE(of, adxl313_of_match); + +static struct spi_driver adxl313_spi_driver = { + .driver = { + .name = "adxl313_spi", + .of_match_table = adxl313_of_match, + }, + .probe = adxl313_spi_probe, + .id_table = adxl313_spi_id, +}; + +module_spi_driver(adxl313_spi_driver); + +MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@gmail.com>"); +MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer SPI driver"); +MODULE_LICENSE("GPL v2");