new file mode 100644
@@ -0,0 +1,111 @@
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_dpi
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: It is possible to switch the dpi setting of the mouse with the
+ press of a button.
+ When read, this file returns the raw number of the actual dpi
+ setting reported by the mouse. This number has to be further
+ processed to receive the real dpi value.
+
+ VALUE DPI
+ 1 800
+ 2 1200
+ 3 1600
+ 4 2000
+ 5 2400
+ 6 3200
+
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the number of the actual profile.
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the raw integer version number of the
+ firmware reported by the mouse. Using the integer value eases
+ further usage in other programs. To receive the real version
+ number the decimal point has to be shifted 2 positions to the
+ left. E.g. a returned value of 138 means 1.38
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/kone_driver_version
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the driver version.
+ The format of the string is "v<major>.<minor>.<patchlevel>".
+ This attribute is used by the userland tools to find the sysfs-
+ paths of installed kone-mice and determine the capabilites of
+ the driver. Versions of this driver for old kernels replace
+ usbhid instead of generic-usb. The way to scan for this file
+ has been chosen to provide a consistent way for all supported
+ kernel versions.
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can store 5 profiles which can be switched by the
+ press of a button. A profile holds informations like button
+ mappings, sensitivity, the colors of the 5 leds and light
+ effects.
+ When read, these files return the respective profile. The
+ returned data is 975 bytes in size.
+ When written, this file lets one write the respective profile
+ data back to the mouse. The data has to be 975 bytes long.
+ The mouse will reject invalid data, whereas the profile number
+ stored in the profile doesn't need to fit the number of the
+ store.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the settings stored in the mouse.
+ The size of the data is 36 bytes and holds information like the
+ startup_profile, tcu state and calibration_data.
+ When written, this file lets write settings back to the mouse.
+ The data has to be 36 bytes long. The mouse will reject invalid
+ data.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The integer value of this attribute ranges from 1 to 5.
+ When read, this attribute returns the number of the profile
+ that's active when the mouse is powered on.
+ When written, this file sets the number of the startup profile
+ and the mouse activates this profile immediately.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/tcu
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse has a "Tracking Control Unit" which lets the user
+ calibrate the laser power to fit the mousepad surface.
+ When read, this file returns the current state of the TCU,
+ where 0 means off and 1 means on.
+ Writing 0 in this file will switch the TCU off.
+ Writing 1 in this file will start the calibration which takes
+ around 6 seconds to complete and activates the TCU.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/weight
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can be equipped with one of four supplied weights
+ ranging from 5 to 20 grams which are recognized by the mouse
+ and its value can be read out. When read, this file returns the
+ raw value returned by the mouse which eases further processing
+ in other software.
+ The values map to the weights as follows:
+
+ VALUE WEIGHT
+ 0 none
+ 1 5g
+ 2 10g
+ 3 15g
+ 4 20g
+
+ This file is readonly.
@@ -268,6 +268,13 @@ config HID_QUANTA
---help---
Support for Quanta Optical Touch dual-touch panels.
+config HID_ROCCAT_KONE
+ tristate "Roccat Kone" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Roccat Kone mouse.
+
config HID_SAMSUNG
tristate "Samsung" if EMBEDDED
depends on USB_HID
@@ -44,6 +44,7 @@ obj-$(CONFIG_HID_ORTEK) += hid-ortek.o
obj-$(CONFIG_HID_QUANTA) += hid-quanta.o
obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o
obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o
+obj-$(CONFIG_HID_ROCCAT_KONE) += hid-roccat-kone.o
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
obj-$(CONFIG_HID_SONY) += hid-sony.o
@@ -399,6 +399,9 @@
#define USB_VENDOR_ID_PRODIGE 0x05af
#define USB_DEVICE_ID_PRODIGE_CORDLESS 0x3062
+#define USB_VENDOR_ID_ROCCAT 0x1e7d
+#define USB_DEVICE_ID_ROCCAT_KONE 0x2ced
+
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
new file mode 100644
@@ -0,0 +1,1001 @@
+/*
+ * Roccat Kone driver for Linux
+ *
+ * Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Roccat Kone is a gamer mouse which consists of a mouse part and a keyboard
+ * part. The keyboard part enables the mouse to execute stored macros with mixed
+ * key- and button-events.
+ *
+ * TODO implement on-the-fly polling-rate change
+ * The windows driver has the ability to change the polling rate of the
+ * device on the press of a mousebutton.
+ * Is it possible to remove and reinstall the urb in raw-event- or any
+ * other handler, or to defer this action to be executed somewhere else?
+ *
+ * TODO implement notification mechanism for overlong macro execution
+ * If user wants to execute an overlong macro only the names of macroset
+ * and macro are given. Should userland tap hidraw or is there an
+ * additional streaming mechanism?
+ *
+ * TODO is it possible to overwrite group for sysfs attributes via udev?
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/usb.h>
+#include <linux/module.h>
+#include "hid-ids.h"
+#include "hid-roccat-kone.h"
+
+static void kone_set_settings_checksum(struct kone_settings *settings)
+{
+ uint16_t checksum = 0;
+ unsigned char *address = (unsigned char *)settings;
+ int i;
+
+ for (i = 0; i < sizeof(struct kone_settings) - 2; ++i, ++address)
+ checksum += *address;
+ settings->checksum = cpu_to_le16(checksum);
+}
+
+/*
+ * Checks success after writing data to mouse
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_check_write(struct usb_device *usb_dev)
+{
+ int len;
+ unsigned char *data;
+
+ data = kmalloc(1, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ do {
+ /*
+ * Mouse needs 50 msecs until it says ok, but there are
+ * 30 more msecs needed for next write to work.
+ */
+ msleep(80);
+
+ len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+ USB_DIR_IN,
+ kone_command_confirm_write, 0, data, 1,
+ USB_CTRL_SET_TIMEOUT);
+
+ if (len != 1) {
+ kfree(data);
+ return -EIO;
+ }
+
+ /*
+ * value of 3 seems to mean something like
+ * "not finished yet, but it looks good"
+ * So check again after a moment.
+ */
+ } while (*data == 3);
+
+ if (*data == 1) { /* everything alright */
+ kfree(data);
+ return 0;
+ } else { /* unknown answer */
+ dev_err(&usb_dev->dev, "got retval %d when checking write\n",
+ *data);
+ kfree(data);
+ return -EIO;
+ }
+}
+
+/*
+ * Reads settings from mouse and stores it in @buf
+ * @buf has to be alloced with GFP_KERNEL
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_get_settings(struct usb_device *usb_dev,
+ struct kone_settings *buf)
+{
+ int len;
+
+ len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ kone_command_settings, 0, buf,
+ sizeof(struct kone_settings), USB_CTRL_SET_TIMEOUT);
+
+ if (len != sizeof(struct kone_settings))
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Writes settings from @buf to mouse
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_set_settings(struct usb_device *usb_dev,
+ struct kone_settings const *settings)
+{
+ int len;
+
+ len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+ USB_REQ_SET_CONFIGURATION,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ kone_command_settings, 0, (char *)settings,
+ sizeof(struct kone_settings),
+ USB_CTRL_SET_TIMEOUT);
+
+ if (len != sizeof(struct kone_settings))
+ return -EIO;
+
+ if (kone_check_write(usb_dev))
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Reads profile data from mouse and stores it in @buf
+ * @number: profile number to read
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_get_profile(struct usb_device *usb_dev,
+ struct kone_profile *buf, int number)
+{
+ int len;
+
+ if (number < 1 || number > 5)
+ return -EINVAL;
+
+ len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ kone_command_profile, number, buf,
+ sizeof(struct kone_profile), USB_CTRL_SET_TIMEOUT);
+
+ if (len != sizeof(struct kone_profile))
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Writes profile data to mouse.
+ * @number: profile number to write
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_set_profile(struct usb_device *usb_dev,
+ struct kone_profile const *profile, int number)
+{
+ int len;
+
+ if (number < 1 || number > 5)
+ return -EINVAL;
+
+ len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+ USB_REQ_SET_CONFIGURATION,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ kone_command_profile, number, (char *)profile,
+ sizeof(struct kone_profile),
+ USB_CTRL_SET_TIMEOUT);
+
+ if (len != sizeof(struct kone_profile))
+ return len;
+
+ if (kone_check_write(usb_dev))
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Reads value of "fast-clip-weight" and stores it in @result
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_get_weight(struct usb_device *usb_dev, int *result)
+{
+ int len;
+ uint8_t *data;
+
+ data = kmalloc(1, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ kone_command_weight, 0, data, 1, USB_CTRL_SET_TIMEOUT);
+
+ if (len != 1) {
+ kfree(data);
+ return -EIO;
+ }
+ *result = (int)*data;
+ kfree(data);
+ return 0;
+}
+
+/*
+ * Reads firmware_version of mouse and stores it in @result
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_get_firmware_version(struct usb_device *usb_dev, int *result)
+{
+ int len;
+ unsigned char *data;
+
+ data = kmalloc(2, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ kone_command_firmware_version, 0, data, 2,
+ USB_CTRL_SET_TIMEOUT);
+
+ if (len != 2) {
+ kfree(data);
+ return -EIO;
+ }
+ *result = le16_to_cpu(*data);
+ kfree(data);
+ return 0;
+}
+
+static ssize_t kone_sysfs_read_settings(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+
+ if (off >= sizeof(struct kone_settings))
+ return 0;
+
+ if (off + count > sizeof(struct kone_settings))
+ count = sizeof(struct kone_settings) - off;
+
+ mutex_lock(&kone->kone_lock);
+ memcpy(buf, &kone->settings + off, count);
+ mutex_unlock(&kone->kone_lock);
+
+ return count;
+}
+
+/*
+ * Writing settings automatically activates startup_profile.
+ * This function keeps values in kone_device up to date and assumes that in
+ * case of error the old data is still valid
+ */
+static ssize_t kone_sysfs_write_settings(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int retval = 0, difference;
+
+ /* I need to get my data in one piece */
+ if (off != 0 || count != sizeof(struct kone_settings))
+ return -EINVAL;
+
+ mutex_lock(&kone->kone_lock);
+ difference = memcmp(buf, &kone->settings, sizeof(struct kone_settings));
+ if (difference) {
+ retval = kone_set_settings(usb_dev,
+ (struct kone_settings const *)buf);
+ if (!retval)
+ memcpy(&kone->settings, buf,
+ sizeof(struct kone_settings));
+ }
+ mutex_unlock(&kone->kone_lock);
+
+ if (retval)
+ return retval;
+
+ /*
+ * If we get here, treat settings as okay and update actual values
+ * according to startup_profile
+ */
+ kone->actual_profile = kone->settings.startup_profile;
+ kone->actual_dpi = kone->profiles[kone->actual_profile - 1].startup_dpi;
+
+ return sizeof(struct kone_settings);
+}
+
+static ssize_t kone_sysfs_read_profilex(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count, int number) {
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+
+ if (off >= sizeof(struct kone_profile))
+ return 0;
+
+ if (off + count > sizeof(struct kone_profile))
+ count = sizeof(struct kone_profile) - off;
+
+ mutex_lock(&kone->kone_lock);
+ memcpy(buf, &kone->profiles[number - 1], sizeof(struct kone_profile));
+ mutex_unlock(&kone->kone_lock);
+
+ return count;
+}
+
+static ssize_t kone_sysfs_read_profile1(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 1);
+}
+
+static ssize_t kone_sysfs_read_profile2(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 2);
+}
+
+static ssize_t kone_sysfs_read_profile3(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 3);
+}
+
+static ssize_t kone_sysfs_read_profile4(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 4);
+}
+
+static ssize_t kone_sysfs_read_profile5(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 5);
+}
+
+/* Writes data only if different to stored data */
+static ssize_t kone_sysfs_write_profilex(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count, int number) {
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ struct kone_profile *profile;
+ int retval = 0, difference;
+
+ /* I need to get my data in one piece */
+ if (off != 0 || count != sizeof(struct kone_profile))
+ return -EINVAL;
+
+ profile = &kone->profiles[number - 1];
+
+ mutex_lock(&kone->kone_lock);
+ difference = memcmp(buf, profile, sizeof(struct kone_profile));
+ if (difference) {
+ retval = kone_set_profile(usb_dev,
+ (struct kone_profile const *)buf, number);
+ if (!retval)
+ memcpy(profile, buf, sizeof(struct kone_profile));
+ }
+ mutex_unlock(&kone->kone_lock);
+
+ if (retval)
+ return retval;
+
+ return sizeof(struct kone_profile);
+}
+
+static ssize_t kone_sysfs_write_profile1(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 1);
+}
+
+static ssize_t kone_sysfs_write_profile2(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 2);
+}
+
+static ssize_t kone_sysfs_write_profile3(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 3);
+}
+
+static ssize_t kone_sysfs_write_profile4(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 4);
+}
+
+static ssize_t kone_sysfs_write_profile5(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 5);
+}
+
+static ssize_t kone_sysfs_show_actual_profile(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ return snprintf(buf, PAGE_SIZE, "%d\n", kone->actual_profile);
+}
+
+static ssize_t kone_sysfs_show_actual_dpi(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ return snprintf(buf, PAGE_SIZE, "%d\n", kone->actual_dpi);
+}
+
+/* weight is read each time, since we don't get informed when it's changed */
+static ssize_t kone_sysfs_show_weight(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int weight = 0;
+ int retval;
+
+ mutex_lock(&kone->kone_lock);
+ retval = kone_get_weight(usb_dev, &weight);
+ mutex_unlock(&kone->kone_lock);
+
+ if (retval)
+ return retval;
+ return snprintf(buf, PAGE_SIZE, "%d\n", weight);
+}
+
+static ssize_t kone_sysfs_show_firmware_version(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ return snprintf(buf, PAGE_SIZE, "%d\n", kone->firmware_version);
+}
+
+static ssize_t kone_sysfs_show_tcu(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ return snprintf(buf, PAGE_SIZE, "%d\n", kone->settings.tcu);
+}
+
+static int kone_tcu_command(struct usb_device *usb_dev, int number)
+{
+ int len;
+ char *value;
+
+ value = kmalloc(1, GFP_KERNEL);
+ if (!value)
+ return -ENOMEM;
+
+ *value = number;
+
+ len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+ USB_REQ_SET_CONFIGURATION,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ kone_command_calibrate, 0, value, 1,
+ USB_CTRL_SET_TIMEOUT);
+
+ kfree(value);
+ return ((len != 1) ? -EIO : 0);
+}
+
+/*
+ * Calibrating the tcu is the only action that changes settings data inside the
+ * mouse, so this data needs to be reread
+ */
+static ssize_t kone_sysfs_set_tcu(struct device *dev,
+ struct device_attribute *attr, char const *buf, size_t size)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int retval, checksum;
+ unsigned long state;
+
+ retval = strict_strtoul(buf, 10, &state);
+ if (retval)
+ return retval;
+
+ if (state != 0 && state != 1)
+ return -EINVAL;
+
+ mutex_lock(&kone->kone_lock);
+
+ if (state == 1) { /* state activate */
+ retval = kone_tcu_command(usb_dev, 1);
+ if (retval)
+ goto exit_unlock;
+ retval = kone_tcu_command(usb_dev, 2);
+ if (retval)
+ goto exit_unlock;
+ ssleep(5); /* tcu needs this time for calibration */
+ retval = kone_tcu_command(usb_dev, 3);
+ if (retval)
+ goto exit_unlock;
+ retval = kone_tcu_command(usb_dev, 0);
+ if (retval)
+ goto exit_unlock;
+ retval = kone_tcu_command(usb_dev, 4);
+ if (retval)
+ goto exit_unlock;
+ /*
+ * Kone needs this time to settle things.
+ * Reading settings too early will result in invalid data.
+ * Roccat's driver waits 1 sec, maybe this time could be
+ * shortened.
+ */
+ ssleep(1);
+ }
+
+ /* calibration changes values in settings, so reread */
+ retval = kone_get_settings(usb_dev, &kone->settings);
+ if (retval)
+ goto exit_no_settings;
+
+ /* only write settings back if activation state is different */
+ if (kone->settings.tcu != state) {
+ kone->settings.tcu = state;
+ kone_set_settings_checksum(&kone->settings);
+
+ retval = kone_set_settings(usb_dev, &kone->settings);
+ if (retval) {
+ dev_err(&usb_dev->dev, "couldn't set tcu state\n");
+ /*
+ * try to reread valid settings into buffer overwriting
+ * first error code
+ */
+ retval = kone_get_settings(usb_dev, &kone->settings);
+ if (retval)
+ goto exit_no_settings;
+ goto exit_unlock;
+ }
+ }
+
+ retval = size;
+exit_no_settings:
+ dev_err(&usb_dev->dev, "couldn't read settings\n");
+exit_unlock:
+ mutex_unlock(&kone->kone_lock);
+ return retval;
+}
+
+static ssize_t kone_sysfs_show_startup_profile(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ return snprintf(buf, PAGE_SIZE, "%d\n", kone->settings.startup_profile);
+}
+
+static ssize_t kone_sysfs_set_startup_profile(struct device *dev,
+ struct device_attribute *attr, char const *buf, size_t size)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int retval;
+ unsigned long new_startup_profile;
+
+ retval = strict_strtoul(buf, 10, &new_startup_profile);
+ if (retval)
+ return retval;
+
+ if (new_startup_profile < 1 || new_startup_profile > 5)
+ return -EINVAL;
+
+ mutex_lock(&kone->kone_lock);
+
+ kone->settings.startup_profile = new_startup_profile;
+ kone_set_settings_checksum(&kone->settings);
+
+ retval = kone_set_settings(usb_dev, &kone->settings);
+
+ mutex_unlock(&kone->kone_lock);
+
+ if (retval)
+ return retval;
+
+ /* changing the startup profile immediately activates this profile */
+ kone->actual_profile = new_startup_profile;
+ kone->actual_dpi = kone->profiles[kone->actual_profile - 1].startup_dpi;
+
+ return size;
+}
+
+/*
+ * This file is used by userland software to find devices that are handled by
+ * this driver. This provides a consistent way for actual and older kernels
+ * where this driver replaced usbhid instead of generic-usb.
+ * Driver capabilities are determined by version number.
+ */
+static ssize_t kone_sysfs_show_driver_version(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, DRIVER_VERSION "\n");
+}
+
+/*
+ * Read actual dpi settings.
+ * Returns raw value for further processing. Refer to enum kone_polling_rates to
+ * get real value.
+ */
+static DEVICE_ATTR(actual_dpi, 0440, kone_sysfs_show_actual_dpi, NULL);
+
+static DEVICE_ATTR(actual_profile, 0440, kone_sysfs_show_actual_profile, NULL);
+
+/*
+ * The mouse can be equipped with one of four supplied weights from 5 to 20
+ * grams which are recognized and its value can be read out.
+ * This returns the raw value reported by the mouse for easy evaluation by
+ * software. Refer to enum kone_weights to get corresponding real weight.
+ */
+static DEVICE_ATTR(weight, 0440, kone_sysfs_show_weight, NULL);
+
+/*
+ * Prints firmware version stored in mouse as integer.
+ * The raw value reported by the mouse is returned for easy evaluation, to get
+ * the real version number the decimal point has to be shifted 2 positions to
+ * the left. E.g. a value of 138 means 1.38.
+ */
+static DEVICE_ATTR(firmware_version, 0440,
+ kone_sysfs_show_firmware_version, NULL);
+
+/*
+ * Prints state of Tracking Control Unit as number where 0 = off and 1 = on
+ * Writing 0 deactivates tcu and writing 1 calibrates and activates the tcu
+ */
+static DEVICE_ATTR(tcu, 0660, kone_sysfs_show_tcu, kone_sysfs_set_tcu);
+
+/* Prints and takes the number of the profile the mouse starts with */
+static DEVICE_ATTR(startup_profile, 0660,
+ kone_sysfs_show_startup_profile,
+ kone_sysfs_set_startup_profile);
+
+static DEVICE_ATTR(kone_driver_version, 0440,
+ kone_sysfs_show_driver_version, NULL);
+
+static struct attribute *kone_attributes[] = {
+ &dev_attr_actual_dpi.attr,
+ &dev_attr_actual_profile.attr,
+ &dev_attr_weight.attr,
+ &dev_attr_firmware_version.attr,
+ &dev_attr_tcu.attr,
+ &dev_attr_startup_profile.attr,
+ &dev_attr_kone_driver_version.attr,
+ NULL
+};
+
+static struct attribute_group kone_attribute_group = {
+ .attrs = kone_attributes
+};
+
+static struct bin_attribute kone_settings_attr = {
+ .attr = { .name = "settings", .mode = 0660 },
+ .size = sizeof(struct kone_settings),
+ .read = kone_sysfs_read_settings,
+ .write = kone_sysfs_write_settings
+};
+
+static struct bin_attribute kone_profile1_attr = {
+ .attr = { .name = "profile1", .mode = 0660 },
+ .size = sizeof(struct kone_profile),
+ .read = kone_sysfs_read_profile1,
+ .write = kone_sysfs_write_profile1
+};
+
+static struct bin_attribute kone_profile2_attr = {
+ .attr = { .name = "profile2", .mode = 0660 },
+ .size = sizeof(struct kone_profile),
+ .read = kone_sysfs_read_profile2,
+ .write = kone_sysfs_write_profile2
+};
+
+static struct bin_attribute kone_profile3_attr = {
+ .attr = { .name = "profile3", .mode = 0660 },
+ .size = sizeof(struct kone_profile),
+ .read = kone_sysfs_read_profile3,
+ .write = kone_sysfs_write_profile3
+};
+
+static struct bin_attribute kone_profile4_attr = {
+ .attr = { .name = "profile4", .mode = 0660 },
+ .size = sizeof(struct kone_profile),
+ .read = kone_sysfs_read_profile4,
+ .write = kone_sysfs_write_profile4
+};
+
+static struct bin_attribute kone_profile5_attr = {
+ .attr = { .name = "profile5", .mode = 0660 },
+ .size = sizeof(struct kone_profile),
+ .read = kone_sysfs_read_profile5,
+ .write = kone_sysfs_write_profile5
+};
+
+static int kone_create_sysfs_attributes(struct usb_interface *intf)
+{
+ int retval;
+
+ retval = sysfs_create_group(&intf->dev.kobj, &kone_attribute_group);
+ if (retval)
+ goto exit_1;
+
+ retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_settings_attr);
+ if (retval)
+ goto exit_2;
+
+ retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile1_attr);
+ if (retval)
+ goto exit_3;
+
+ retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile2_attr);
+ if (retval)
+ goto exit_4;
+
+ retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile3_attr);
+ if (retval)
+ goto exit_5;
+
+ retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile4_attr);
+ if (retval)
+ goto exit_6;
+
+ retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile5_attr);
+ if (retval)
+ goto exit_7;
+
+ return 0;
+
+exit_7:
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile4_attr);
+exit_6:
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile3_attr);
+exit_5:
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile2_attr);
+exit_4:
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile1_attr);
+exit_3:
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_settings_attr);
+exit_2:
+ sysfs_remove_group(&intf->dev.kobj, &kone_attribute_group);
+exit_1:
+ return retval;
+}
+
+static void kone_remove_sysfs_attributes(struct usb_interface *intf)
+{
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile5_attr);
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile4_attr);
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile3_attr);
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile2_attr);
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile1_attr);
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_settings_attr);
+ sysfs_remove_group(&intf->dev.kobj, &kone_attribute_group);
+}
+
+static int kone_init_kone_device_struct(struct usb_device *usb_dev,
+ struct kone_device *kone)
+{
+ uint i;
+ int retval;
+
+ mutex_init(&kone->kone_lock);
+
+ for (i = 0; i < 5; ++i) {
+ retval = kone_get_profile(usb_dev, &kone->profiles[i], i + 1);
+ if (retval)
+ return retval;
+ }
+
+ retval = kone_get_settings(usb_dev, &kone->settings);
+ if (retval)
+ return retval;
+
+ retval = kone_get_firmware_version(usb_dev, &kone->firmware_version);
+ if (retval)
+ return retval;
+
+ kone->actual_profile = kone->settings.startup_profile;
+ kone->actual_dpi = kone->profiles[kone->actual_profile].startup_dpi;
+
+ return 0;
+}
+
+/*
+ * Since IGNORE_MOUSE quirk moved to hid-apple, there is no way to bind only to
+ * mousepart if usb_hid is compiled into the kernel and kone is compiled as
+ * module.
+ * Secial behaviour is bound only to mousepart since only mouseevents contain
+ * additional notifications.
+ */
+static int kone_init_specials(struct hid_device *hdev)
+{
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+ struct usb_device *usb_dev = interface_to_usbdev(intf);
+ struct kone_device *kone;
+ int retval;
+
+ if (intf->cur_altsetting->desc.bInterfaceProtocol
+ == USB_INTERFACE_PROTOCOL_MOUSE) {
+
+ kone = kzalloc(sizeof(*kone), GFP_KERNEL);
+ if (!kone) {
+ dev_err(&hdev->dev, "can't alloc device descriptor\n");
+ return -ENOMEM;
+ }
+ hid_set_drvdata(hdev, kone);
+
+ retval = kone_init_kone_device_struct(usb_dev, kone);
+ if (retval) {
+ dev_err(&hdev->dev,
+ "couldn't init struct kone_device\n");
+ goto exit_free;
+ }
+ retval = kone_create_sysfs_attributes(intf);
+ if (retval) {
+ dev_err(&hdev->dev, "cannot create sysfs files\n");
+ goto exit_free;
+ }
+ } else {
+ hid_set_drvdata(hdev, NULL);
+ }
+
+ return 0;
+exit_free:
+ kfree(kone);
+ return retval;
+}
+
+
+static void kone_remove_specials(struct hid_device *hdev)
+{
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+
+ if (intf->cur_altsetting->desc.bInterfaceProtocol
+ == USB_INTERFACE_PROTOCOL_MOUSE) {
+ kone_remove_sysfs_attributes(intf);
+ kfree(hid_get_drvdata(hdev));
+ }
+}
+
+static int kone_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int retval;
+
+ retval = hid_parse(hdev);
+ if (retval) {
+ dev_err(&hdev->dev, "parse failed\n");
+ goto exit;
+ }
+
+ retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (retval) {
+ dev_err(&hdev->dev, "hw start failed\n");
+ goto exit;
+ }
+
+ retval = kone_init_specials(hdev);
+ if (retval) {
+ dev_err(&hdev->dev, "couldn't install mouse\n");
+ goto exit_stop;
+ }
+
+ return 0;
+
+exit_stop:
+ hid_hw_stop(hdev);
+exit:
+ return retval;
+}
+
+static void kone_remove(struct hid_device *hdev)
+{
+ kone_remove_specials(hdev);
+ hid_hw_stop(hdev);
+}
+
+/*
+ * Is called for keyboard- and mousepart.
+ * Only mousepart gets informations about special events in its extended event
+ * structure.
+ */
+static int kone_raw_event(struct hid_device *hdev, struct hid_report *report,
+ u8 *data, int size)
+{
+ struct kone_device *kone = hid_get_drvdata(hdev);
+ struct kone_mouse_event *event = (struct kone_mouse_event *)data;
+
+ /* keyboard events are always processed by default handler */
+ if (size != sizeof(struct kone_mouse_event))
+ return 0;
+
+ /*
+ * Firmware 1.38 introduced new behaviour for tilt buttons.
+ * Pressed tilt button is reported in each movement event.
+ * Workaround sends only one event per press.
+ */
+ if (kone->last_tilt_state == event->tilt)
+ event->tilt = 0;
+ else
+ kone->last_tilt_state = event->tilt;
+
+ /*
+ * handle special events and keep actual profile and dpi values
+ * up to date
+ */
+ switch (event->event) {
+ case kone_mouse_event_osd_dpi:
+ dev_dbg(&hdev->dev, "osd dpi event. actual dpi %d\n",
+ event->value);
+ return 1; /* return 1 if event was handled */
+ case kone_mouse_event_switch_dpi:
+ kone->actual_dpi = event->value;
+ dev_dbg(&hdev->dev, "switched dpi to %d\n", event->value);
+ return 1;
+ case kone_mouse_event_osd_profile:
+ dev_dbg(&hdev->dev, "osd profile event. actual profile %d\n",
+ event->value);
+ return 1;
+ case kone_mouse_event_switch_profile:
+ kone->actual_profile = event->value;
+ kone->actual_dpi = kone->profiles[kone->actual_profile - 1].
+ startup_dpi;
+ dev_dbg(&hdev->dev, "switched profile to %d\n", event->value);
+ return 1;
+ case kone_mouse_event_call_overlong_macro:
+ dev_dbg(&hdev->dev, "overlong macro called, button %d %s/%s\n",
+ event->macro_key,
+ kone->profiles[kone->actual_profile - 1].
+ button_infos[event->macro_key].macro_set_name,
+ kone->profiles[kone->actual_profile - 1].
+ button_infos[event->macro_key].macro_name
+ );
+ return 1;
+ }
+
+ return 0; /* do further processing */
+}
+
+static const struct hid_device_id kone_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) },
+ { } };
+
+MODULE_DEVICE_TABLE(hid, kone_devices);
+
+static struct hid_driver kone_driver = { .name = "kone",
+ .id_table = kone_devices, .probe = kone_probe,
+ .remove = kone_remove, .raw_event = kone_raw_event, };
+
+static int kone_init(void)
+{
+ return hid_register_driver(&kone_driver);
+}
+
+static void kone_exit(void)
+{
+ hid_unregister_driver(&kone_driver);
+}
+
+module_init(kone_init);
+module_exit(kone_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
new file mode 100644
@@ -0,0 +1,214 @@
+#ifndef __HID_ROCCAT_KONE_H
+#define __HID_ROCCAT_KONE_H
+
+/*
+ * Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/types.h>
+
+#define DRIVER_VERSION "v0.3.0"
+#define DRIVER_AUTHOR "Stefan Achatz"
+#define DRIVER_DESC "USB Roccat Kone driver"
+#define DRIVER_LICENSE "GPL v2"
+
+#pragma pack(push)
+#pragma pack(1)
+
+struct kone_keystroke {
+ uint8_t key;
+ uint8_t action;
+ uint16_t period; /* in milliseconds */
+};
+
+enum kone_keystroke_buttons {
+ kone_keystroke_button_1 = 0xf0, /* left mouse button */
+ kone_keystroke_button_2 = 0xf1, /* right mouse button */
+ kone_keystroke_button_3 = 0xf2, /* wheel */
+ kone_keystroke_button_9 = 0xf3, /* side button up */
+ kone_keystroke_button_8 = 0xf4 /* side button down */
+};
+
+enum kone_keystroke_actions {
+ kone_keystroke_action_press = 0,
+ kone_keystroke_action_release = 1
+};
+
+struct kone_button_info {
+ uint8_t number; /* range 1-8 */
+ uint8_t type;
+ uint8_t macro_type; /* 0 = short, 1 = overlong */
+ uint8_t macro_set_name[16]; /* can be max 15 chars long */
+ uint8_t macro_name[16]; /* can be max 15 chars long */
+ uint8_t count;
+ struct kone_keystroke keystrokes[20];
+};
+
+enum kone_button_info_types {
+ /* valid button types until firmware 1.32 */
+ kone_button_info_type_button_1 = 0x1, /* click (left mouse button) */
+ kone_button_info_type_button_2 = 0x2, /* menu (right mouse button)*/
+ kone_button_info_type_button_3 = 0x3, /* scroll (wheel) */
+ kone_button_info_type_double_click = 0x4,
+ kone_button_info_type_key = 0x5,
+ kone_button_info_type_macro = 0x6,
+ kone_button_info_type_off = 0x7,
+ /* TODO clarify function and rename */
+ kone_button_info_type_osd_xy_prescaling = 0x8,
+ kone_button_info_type_osd_dpi = 0x9,
+ kone_button_info_type_osd_profile = 0xa,
+ kone_button_info_type_button_9 = 0xb, /* ie forward */
+ kone_button_info_type_button_8 = 0xc, /* ie backward */
+ kone_button_info_type_dpi_up = 0xd, /* internal */
+ kone_button_info_type_dpi_down = 0xe, /* internal */
+ kone_button_info_type_button_7 = 0xf, /* tilt left */
+ kone_button_info_type_button_6 = 0x10, /* tilt right */
+ kone_button_info_type_profile_up = 0x11, /* internal */
+ kone_button_info_type_profile_down = 0x12, /* internal */
+ /* additional valid button types since firmware 1.38 */
+ kone_button_info_type_multimedia_open_player = 0x20,
+ kone_button_info_type_multimedia_next_track = 0x21,
+ kone_button_info_type_multimedia_prev_track = 0x22,
+ kone_button_info_type_multimedia_play_pause = 0x23,
+ kone_button_info_type_multimedia_stop = 0x24,
+ kone_button_info_type_multimedia_mute = 0x25,
+ kone_button_info_type_multimedia_volume_up = 0x26,
+ kone_button_info_type_multimedia_volume_down = 0x27
+};
+
+struct kone_light_info {
+ uint8_t number; /* number of light 1-5 */
+ uint8_t mod; /* 1 = on, 2 = off */
+ uint8_t red; /* range 0x00-0xff */
+ uint8_t green; /* range 0x00-0xff */
+ uint8_t blue; /* range 0x00-0xff */
+};
+
+struct kone_profile {
+ uint16_t size; /* always 975 */
+ uint16_t unused; /* always 0 */
+
+ /*
+ * range 1-5
+ * This number does not need to correspond with location where profile
+ * saved
+ */
+ uint8_t profile; /* range 1-5 */
+
+ uint16_t main_sensitivity; /* range 100-1000 */
+ uint8_t xy_sensitivity_enabled; /* 1 = on, 2 = off */
+ uint16_t x_sensitivity; /* range 100-1000 */
+ uint16_t y_sensitivity; /* range 100-1000 */
+ uint8_t dpi_rate; /* bit 1 = 800, ... */
+ uint8_t startup_dpi; /* range 1-6 */
+ uint8_t polling_rate; /* 1 = 125Hz, 2 = 500Hz, 3 = 1000Hz */
+ /* kone has no dcu
+ * value is always 2 in firmwares <= 1.32 and
+ * 1 in firmwares > 1.32
+ */
+ uint8_t dcu_flag;
+ uint8_t light_effect_1; /* range 1-3 */
+ uint8_t light_effect_2; /* range 1-5 */
+ uint8_t light_effect_3; /* range 1-4 */
+ uint8_t light_effect_speed; /* range 0-255 */
+
+ struct kone_light_info light_infos[5];
+ struct kone_button_info button_infos[8];
+
+ uint16_t checksum; /* \brief holds checksum of struct */
+};
+
+enum kone_polling_rates {
+ kone_polling_rate_125 = 1,
+ kone_polling_rate_500 = 2,
+ kone_polling_rate_1000 = 3
+};
+
+struct kone_settings {
+ uint16_t size; /* always 36 */
+ uint8_t startup_profile; /* 1-5 */
+ uint8_t unknown1;
+ uint8_t tcu; /* 0 = off, 1 = on */
+ uint8_t unknown2[23];
+ uint8_t calibration_data[4];
+ uint8_t unknown3[2];
+ uint16_t checksum;
+};
+
+/*
+ * 12 byte mouse event read by interrupt_read
+ */
+struct kone_mouse_event {
+ uint8_t report_number; /* always 1 */
+ uint8_t button;
+ uint16_t x;
+ uint16_t y;
+ uint8_t wheel; /* up = 1, down = -1 */
+ uint8_t tilt; /* right = 1, left = -1 */
+ uint8_t unknown;
+ uint8_t event;
+ uint8_t value; /* press = 0, release = 1 */
+ uint8_t macro_key; /* 0 to 8 */
+};
+
+enum kone_mouse_events {
+ /* osd events are thought to be display on screen */
+ kone_mouse_event_osd_dpi = 0xa0,
+ kone_mouse_event_osd_profile = 0xb0,
+ /* TODO clarify meaning and occurence of kone_mouse_event_calibration */
+ kone_mouse_event_calibration = 0xc0,
+ kone_mouse_event_call_overlong_macro = 0xe0,
+ /* switch events notify if user changed values wiht mousebutton click */
+ kone_mouse_event_switch_dpi = 0xf0,
+ kone_mouse_event_switch_profile = 0xf1
+};
+
+enum kone_commands {
+ kone_command_profile = 0x5a,
+ kone_command_settings = 0x15a,
+ kone_command_firmware_version = 0x25a,
+ kone_command_weight = 0x45a,
+ kone_command_calibrate = 0x55a,
+ kone_command_confirm_write = 0x65a,
+ kone_command_firmware = 0xe5a
+};
+
+#pragma pack(pop)
+
+struct kone_device {
+ /*
+ * Storing actual values when we get informed about changes since there
+ * is no way of getting this information from the device on demand
+ */
+ int actual_profile, actual_dpi;
+ /* Used for neutralizing abnormal tilt button behaviour */
+ int last_tilt_state;
+ /*
+ * It's unlikely that multiple sysfs attributes are accessed at a time,
+ * so only one mutex is used to secure hardware access and profiles and
+ * settings of this struct.
+ */
+ struct mutex kone_lock;
+
+ /*
+ * Storing the data here reduces IO and ensures that data is available
+ * when its needed (E.g. interrupt handler).
+ */
+ struct kone_profile profiles[5];
+ struct kone_settings settings;
+
+ /*
+ * firmware doesn't change unless firmware update is implemented,
+ * so it's read only once
+ */
+ int firmware_version;
+};
+
+#endif