diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
new file mode 100644
index 0000000..88340a2
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -0,0 +1,111 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_dpi
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	It is possible to switch the dpi setting of the mouse with the
+		press of a button.
+		When read, this file returns the raw number of the actual dpi
+		setting reported by the mouse. This number has to be further
+		processed to receive the real dpi value.
+
+		VALUE DPI
+		1     800
+		2     1200
+		3     1600
+		4     2000
+		5     2400
+		6     3200
+
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the number of the actual profile.
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 138 means 1.38
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/kone_driver_version
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the driver version.
+		The format of the string is "v<major>.<minor>.<patchlevel>".
+		This attribute is used by the userland tools to find the sysfs-
+		paths of installed kone-mice and determine the capabilites of
+		the driver. Versions of this driver for old kernels replace
+		usbhid instead of generic-usb. The way to scan for this file
+		has been chosen to provide a consistent way for all supported
+		kernel versions.
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+                press of a button. A profile holds informations like button
+                mappings, sensitivity, the colors of the 5 leds and light
+                effects.
+                When read, these files return the respective profile. The
+                returned data is 975 bytes in size.
+		When written, this file lets one write the respective profile
+		data back to the mouse. The data has to be 975 bytes long.
+		The mouse will reject invalid data, whereas the profile number
+		stored in the profile doesn't need to fit the number of the
+		store.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the settings stored in the mouse.
+		The size of the data is 36 bytes and holds information like the
+		startup_profile, tcu state and calibration_data.
+		When written, this file lets write settings back to the mouse.
+		The data has to be 36 bytes long. The mouse will reject invalid
+		data.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1 to 5.
+                When read, this attribute returns the number of the profile
+                that's active when the mouse is powered on.
+		When written, this file sets the number of the startup profile
+		and the mouse activates this profile immediately.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/tcu
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a "Tracking Control Unit" which lets the user
+		calibrate the laser power to fit the mousepad surface.
+		When read, this file returns the current state of the TCU,
+		where 0 means off and 1 means on.
+		Writing 0 in this file will switch the TCU off.
+		Writing 1 in this file will start the calibration which takes
+		around 6 seconds to complete and activates the TCU.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/weight
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can be equipped with one of four supplied weights
+		ranging from 5 to 20 grams which are recognized by the mouse
+		and its value can be read out. When read, this file returns the
+		raw value returned by the mouse which eases further processing
+		in other software.
+		The values map to the weights as follows:
+
+		VALUE WEIGHT
+		0     none
+		1     5g
+		2     10g
+		3     15g
+		4     20g
+
+		This file is readonly.
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 71d4c07..d819b02 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -268,6 +268,13 @@ config HID_QUANTA
 	---help---
 	Support for Quanta Optical Touch dual-touch panels.
 
+config HID_ROCCAT_KONE
+	tristate "Roccat Kone" if EMBEDDED
+	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	Support for Roccat Kone mouse.
+
 config HID_SAMSUNG
 	tristate "Samsung" if EMBEDDED
 	depends on USB_HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 0b2618f..08b83cc 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_HID_ORTEK)		+= hid-ortek.o
 obj-$(CONFIG_HID_QUANTA)	+= hid-quanta.o
 obj-$(CONFIG_HID_PANTHERLORD)	+= hid-pl.o
 obj-$(CONFIG_HID_PETALYNX)	+= hid-petalynx.o
+obj-$(CONFIG_HID_ROCCAT_KONE)	+= hid-roccat-kone.o
 obj-$(CONFIG_HID_SAMSUNG)	+= hid-samsung.o
 obj-$(CONFIG_HID_SMARTJOYPLUS)	+= hid-sjoy.o
 obj-$(CONFIG_HID_SONY)		+= hid-sony.o
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 72c05f9..237c583 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -399,6 +399,9 @@
 #define USB_VENDOR_ID_PRODIGE		0x05af
 #define USB_DEVICE_ID_PRODIGE_CORDLESS	0x3062
 
+#define USB_VENDOR_ID_ROCCAT		0x1e7d
+#define USB_DEVICE_ID_ROCCAT_KONE	0x2ced
+
 #define USB_VENDOR_ID_SAITEK		0x06a3
 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD	0xff17
 
diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c
new file mode 100644
index 0000000..1a5e993
--- /dev/null
+++ b/drivers/hid/hid-roccat-kone.c
@@ -0,0 +1,1001 @@
+/*
+ * Roccat Kone driver for Linux
+ *
+ * Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Roccat Kone is a gamer mouse which consists of a mouse part and a keyboard
+ * part. The keyboard part enables the mouse to execute stored macros with mixed
+ * key- and button-events.
+ *
+ * TODO implement on-the-fly polling-rate change
+ *      The windows driver has the ability to change the polling rate of the
+ *      device on the press of a mousebutton.
+ *      Is it possible to remove and reinstall the urb in raw-event- or any
+ *      other handler, or to defer this action to be executed somewhere else?
+ *
+ * TODO implement notification mechanism for overlong macro execution
+ *      If user wants to execute an overlong macro only the names of macroset
+ *      and macro are given. Should userland tap hidraw or is there an
+ *      additional streaming mechanism?
+ *
+ * TODO is it possible to overwrite group for sysfs attributes via udev?
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/usb.h>
+#include <linux/module.h>
+#include "hid-ids.h"
+#include "hid-roccat-kone.h"
+
+static void kone_set_settings_checksum(struct kone_settings *settings)
+{
+	uint16_t checksum = 0;
+	unsigned char *address = (unsigned char *)settings;
+	int i;
+
+	for (i = 0; i < sizeof(struct kone_settings) - 2; ++i, ++address)
+		checksum += *address;
+	settings->checksum = cpu_to_le16(checksum);
+}
+
+/*
+ * Checks success after writing data to mouse
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_check_write(struct usb_device *usb_dev)
+{
+	int len;
+	unsigned char *data;
+
+	data = kmalloc(1, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	do {
+		/*
+		 * Mouse needs 50 msecs until it says ok, but there are
+		 * 30 more msecs needed for next write to work.
+		 */
+		msleep(80);
+
+		len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+				USB_REQ_CLEAR_FEATURE,
+				USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+				USB_DIR_IN,
+				kone_command_confirm_write, 0, data, 1,
+				USB_CTRL_SET_TIMEOUT);
+
+		if (len != 1) {
+			kfree(data);
+			return -EIO;
+		}
+
+		/*
+		 * value of 3 seems to mean something like
+		 * "not finished yet, but it looks good"
+		 * So check again after a moment.
+		 */
+	} while (*data == 3);
+
+	if (*data == 1) { /* everything alright */
+		kfree(data);
+		return 0;
+	} else { /* unknown answer */
+		dev_err(&usb_dev->dev, "got retval %d when checking write\n",
+				*data);
+		kfree(data);
+		return -EIO;
+	}
+}
+
+/*
+ * Reads settings from mouse and stores it in @buf
+ * @buf has to be alloced with GFP_KERNEL
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_get_settings(struct usb_device *usb_dev,
+		struct kone_settings *buf)
+{
+	int len;
+
+	len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+			USB_REQ_CLEAR_FEATURE,
+			USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+			kone_command_settings, 0, buf,
+			sizeof(struct kone_settings), USB_CTRL_SET_TIMEOUT);
+
+	if (len != sizeof(struct kone_settings))
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * Writes settings from @buf to mouse
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_set_settings(struct usb_device *usb_dev,
+		struct kone_settings const *settings)
+{
+	int len;
+
+	len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+			USB_REQ_SET_CONFIGURATION,
+			USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			kone_command_settings, 0, (char *)settings,
+			sizeof(struct kone_settings),
+			USB_CTRL_SET_TIMEOUT);
+
+	if (len != sizeof(struct kone_settings))
+		return -EIO;
+
+	if (kone_check_write(usb_dev))
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * Reads profile data from mouse and stores it in @buf
+ * @number: profile number to read
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_get_profile(struct usb_device *usb_dev,
+		struct kone_profile *buf, int number)
+{
+	int len;
+
+	if (number < 1 || number > 5)
+		return -EINVAL;
+
+	len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+			USB_REQ_CLEAR_FEATURE,
+			USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+			kone_command_profile, number, buf,
+			sizeof(struct kone_profile), USB_CTRL_SET_TIMEOUT);
+
+	if (len != sizeof(struct kone_profile))
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * Writes profile data to mouse.
+ * @number: profile number to write
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_set_profile(struct usb_device *usb_dev,
+		struct kone_profile const *profile, int number)
+{
+	int len;
+
+	if (number < 1 || number > 5)
+		return -EINVAL;
+
+	len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+			USB_REQ_SET_CONFIGURATION,
+			USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			kone_command_profile, number, (char *)profile,
+			sizeof(struct kone_profile),
+			USB_CTRL_SET_TIMEOUT);
+
+	if (len != sizeof(struct kone_profile))
+		return len;
+
+	if (kone_check_write(usb_dev))
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * Reads value of "fast-clip-weight" and stores it in @result
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_get_weight(struct usb_device *usb_dev, int *result)
+{
+	int len;
+	uint8_t *data;
+
+	data = kmalloc(1, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+			USB_REQ_CLEAR_FEATURE,
+			USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+			kone_command_weight, 0, data, 1, USB_CTRL_SET_TIMEOUT);
+
+	if (len != 1) {
+		kfree(data);
+		return -EIO;
+	}
+	*result = (int)*data;
+	kfree(data);
+	return 0;
+}
+
+/*
+ * Reads firmware_version of mouse and stores it in @result
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_get_firmware_version(struct usb_device *usb_dev, int *result)
+{
+	int len;
+	unsigned char *data;
+
+	data = kmalloc(2, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+			USB_REQ_CLEAR_FEATURE,
+			USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+			kone_command_firmware_version, 0, data, 2,
+			USB_CTRL_SET_TIMEOUT);
+
+	if (len != 2) {
+		kfree(data);
+		return -EIO;
+	}
+	*result = le16_to_cpu(*data);
+	kfree(data);
+	return 0;
+}
+
+static ssize_t kone_sysfs_read_settings(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count) {
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+
+	if (off >= sizeof(struct kone_settings))
+		return 0;
+
+	if (off + count > sizeof(struct kone_settings))
+		count = sizeof(struct kone_settings) - off;
+
+	mutex_lock(&kone->kone_lock);
+	memcpy(buf, &kone->settings + off, count);
+	mutex_unlock(&kone->kone_lock);
+
+	return count;
+}
+
+/*
+ * Writing settings automatically activates startup_profile.
+ * This function keeps values in kone_device up to date and assumes that in
+ * case of error the old data is still valid
+ */
+static ssize_t kone_sysfs_write_settings(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count) {
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+	struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+	int retval = 0, difference;
+
+	/* I need to get my data in one piece */
+	if (off != 0 || count != sizeof(struct kone_settings))
+		return -EINVAL;
+
+	mutex_lock(&kone->kone_lock);
+	difference = memcmp(buf, &kone->settings, sizeof(struct kone_settings));
+	if (difference) {
+		retval = kone_set_settings(usb_dev,
+				(struct kone_settings const *)buf);
+		if (!retval)
+			memcpy(&kone->settings, buf,
+					sizeof(struct kone_settings));
+	}
+	mutex_unlock(&kone->kone_lock);
+
+	if (retval)
+		return retval;
+
+	/*
+	 * If we get here, treat settings as okay and update actual values
+	 * according to startup_profile
+	 */
+	kone->actual_profile = kone->settings.startup_profile;
+	kone->actual_dpi = kone->profiles[kone->actual_profile - 1].startup_dpi;
+
+	return sizeof(struct kone_settings);
+}
+
+static ssize_t kone_sysfs_read_profilex(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count, int number) {
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+
+	if (off >= sizeof(struct kone_profile))
+		return 0;
+
+	if (off + count > sizeof(struct kone_profile))
+		count = sizeof(struct kone_profile) - off;
+
+	mutex_lock(&kone->kone_lock);
+	memcpy(buf, &kone->profiles[number - 1], sizeof(struct kone_profile));
+	mutex_unlock(&kone->kone_lock);
+
+	return count;
+}
+
+static ssize_t kone_sysfs_read_profile1(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count) {
+	return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 1);
+}
+
+static ssize_t kone_sysfs_read_profile2(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count) {
+	return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 2);
+}
+
+static ssize_t kone_sysfs_read_profile3(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count) {
+	return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 3);
+}
+
+static ssize_t kone_sysfs_read_profile4(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count) {
+	return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 4);
+}
+
+static ssize_t kone_sysfs_read_profile5(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count) {
+	return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 5);
+}
+
+/* Writes data only if different to stored data */
+static ssize_t kone_sysfs_write_profilex(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count, int number) {
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+	struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+	struct kone_profile *profile;
+	int retval = 0, difference;
+
+	/* I need to get my data in one piece */
+	if (off != 0 || count != sizeof(struct kone_profile))
+		return -EINVAL;
+
+	profile = &kone->profiles[number - 1];
+
+	mutex_lock(&kone->kone_lock);
+	difference = memcmp(buf, profile, sizeof(struct kone_profile));
+	if (difference) {
+		retval = kone_set_profile(usb_dev,
+				(struct kone_profile const *)buf, number);
+		if (!retval)
+			memcpy(profile, buf, sizeof(struct kone_profile));
+	}
+	mutex_unlock(&kone->kone_lock);
+
+	if (retval)
+		return retval;
+
+	return sizeof(struct kone_profile);
+}
+
+static ssize_t kone_sysfs_write_profile1(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count) {
+	return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 1);
+}
+
+static ssize_t kone_sysfs_write_profile2(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count) {
+	return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 2);
+}
+
+static ssize_t kone_sysfs_write_profile3(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count) {
+	return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 3);
+}
+
+static ssize_t kone_sysfs_write_profile4(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count) {
+	return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 4);
+}
+
+static ssize_t kone_sysfs_write_profile5(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count) {
+	return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 5);
+}
+
+static ssize_t kone_sysfs_show_actual_profile(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+	return snprintf(buf, PAGE_SIZE, "%d\n", kone->actual_profile);
+}
+
+static ssize_t kone_sysfs_show_actual_dpi(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+	return snprintf(buf, PAGE_SIZE, "%d\n", kone->actual_dpi);
+}
+
+/* weight is read each time, since we don't get informed when it's changed */
+static ssize_t kone_sysfs_show_weight(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+	struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+	int weight = 0;
+	int retval;
+
+	mutex_lock(&kone->kone_lock);
+	retval = kone_get_weight(usb_dev, &weight);
+	mutex_unlock(&kone->kone_lock);
+
+	if (retval)
+		return retval;
+	return snprintf(buf, PAGE_SIZE, "%d\n", weight);
+}
+
+static ssize_t kone_sysfs_show_firmware_version(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+	return snprintf(buf, PAGE_SIZE, "%d\n", kone->firmware_version);
+}
+
+static ssize_t kone_sysfs_show_tcu(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+	return snprintf(buf, PAGE_SIZE, "%d\n", kone->settings.tcu);
+}
+
+static int kone_tcu_command(struct usb_device *usb_dev, int number)
+{
+	int len;
+	char *value;
+
+	value = kmalloc(1, GFP_KERNEL);
+	if (!value)
+		return -ENOMEM;
+
+	*value = number;
+
+	len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+			USB_REQ_SET_CONFIGURATION,
+			USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			kone_command_calibrate, 0, value, 1,
+			USB_CTRL_SET_TIMEOUT);
+
+	kfree(value);
+	return ((len != 1) ? -EIO : 0);
+}
+
+/*
+ * Calibrating the tcu is the only action that changes settings data inside the
+ * mouse, so this data needs to be reread
+ */
+static ssize_t kone_sysfs_set_tcu(struct device *dev,
+		struct device_attribute *attr, char const *buf, size_t size)
+{
+	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+	struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+	int retval, checksum;
+	unsigned long state;
+
+	retval = strict_strtoul(buf, 10, &state);
+	if (retval)
+		return retval;
+
+	if (state != 0 && state != 1)
+		return -EINVAL;
+
+	mutex_lock(&kone->kone_lock);
+
+	if (state == 1) { /* state activate */
+		retval = kone_tcu_command(usb_dev, 1);
+		if (retval)
+			goto exit_unlock;
+		retval = kone_tcu_command(usb_dev, 2);
+		if (retval)
+			goto exit_unlock;
+		ssleep(5); /* tcu needs this time for calibration */
+		retval = kone_tcu_command(usb_dev, 3);
+		if (retval)
+			goto exit_unlock;
+		retval = kone_tcu_command(usb_dev, 0);
+		if (retval)
+			goto exit_unlock;
+		retval = kone_tcu_command(usb_dev, 4);
+		if (retval)
+			goto exit_unlock;
+		/*
+		 * Kone needs this time to settle things.
+		 * Reading settings too early will result in invalid data.
+		 * Roccat's driver waits 1 sec, maybe this time could be
+		 * shortened.
+		 */
+		ssleep(1);
+	}
+
+	/* calibration changes values in settings, so reread */
+	retval = kone_get_settings(usb_dev, &kone->settings);
+	if (retval)
+		goto exit_no_settings;
+
+	/* only write settings back if activation state is different */
+	if (kone->settings.tcu != state) {
+		kone->settings.tcu = state;
+		kone_set_settings_checksum(&kone->settings);
+
+		retval = kone_set_settings(usb_dev, &kone->settings);
+		if (retval) {
+			dev_err(&usb_dev->dev, "couldn't set tcu state\n");
+			/*
+			 * try to reread valid settings into buffer overwriting
+			 * first error code
+			 */
+			retval = kone_get_settings(usb_dev, &kone->settings);
+			if (retval)
+				goto exit_no_settings;
+			goto exit_unlock;
+		}
+	}
+
+	retval = size;
+exit_no_settings:
+	dev_err(&usb_dev->dev, "couldn't read settings\n");
+exit_unlock:
+	mutex_unlock(&kone->kone_lock);
+	return retval;
+}
+
+static ssize_t kone_sysfs_show_startup_profile(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+	return snprintf(buf, PAGE_SIZE, "%d\n", kone->settings.startup_profile);
+}
+
+static ssize_t kone_sysfs_set_startup_profile(struct device *dev,
+		struct device_attribute *attr, char const *buf, size_t size)
+{
+	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+	struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+	int retval;
+	unsigned long new_startup_profile;
+
+	retval = strict_strtoul(buf, 10, &new_startup_profile);
+	if (retval)
+		return retval;
+
+	if (new_startup_profile  < 1 || new_startup_profile > 5)
+		return -EINVAL;
+
+	mutex_lock(&kone->kone_lock);
+
+	kone->settings.startup_profile = new_startup_profile;
+	kone_set_settings_checksum(&kone->settings);
+
+	retval = kone_set_settings(usb_dev, &kone->settings);
+
+	mutex_unlock(&kone->kone_lock);
+
+	if (retval)
+		return retval;
+
+	/* changing the startup profile immediately activates this profile */
+	kone->actual_profile = new_startup_profile;
+	kone->actual_dpi = kone->profiles[kone->actual_profile - 1].startup_dpi;
+
+	return size;
+}
+
+/*
+ * This file is used by userland software to find devices that are handled by
+ * this driver. This provides a consistent way for actual and older kernels
+ * where this driver replaced usbhid instead of generic-usb.
+ * Driver capabilities are determined by version number.
+ */
+static ssize_t kone_sysfs_show_driver_version(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, DRIVER_VERSION "\n");
+}
+
+/*
+ * Read actual dpi settings.
+ * Returns raw value for further processing. Refer to enum kone_polling_rates to
+ * get real value.
+ */
+static DEVICE_ATTR(actual_dpi, 0440, kone_sysfs_show_actual_dpi, NULL);
+
+static DEVICE_ATTR(actual_profile, 0440, kone_sysfs_show_actual_profile, NULL);
+
+/*
+ * The mouse can be equipped with one of four supplied weights from 5 to 20
+ * grams which are recognized and its value can be read out.
+ * This returns the raw value reported by the mouse for easy evaluation by
+ * software. Refer to enum kone_weights to get corresponding real weight.
+ */
+static DEVICE_ATTR(weight, 0440, kone_sysfs_show_weight, NULL);
+
+/*
+ * Prints firmware version stored in mouse as integer.
+ * The raw value reported by the mouse is returned for easy evaluation, to get
+ * the real version number the decimal point has to be shifted 2 positions to
+ * the left. E.g. a value of 138 means 1.38.
+ */
+static DEVICE_ATTR(firmware_version, 0440,
+		kone_sysfs_show_firmware_version, NULL);
+
+/*
+ * Prints state of Tracking Control Unit as number where 0 = off and 1 = on
+ * Writing 0 deactivates tcu and writing 1 calibrates and activates the tcu
+ */
+static DEVICE_ATTR(tcu, 0660, kone_sysfs_show_tcu, kone_sysfs_set_tcu);
+
+/* Prints and takes the number of the profile the mouse starts with */
+static DEVICE_ATTR(startup_profile, 0660,
+		kone_sysfs_show_startup_profile,
+		kone_sysfs_set_startup_profile);
+
+static DEVICE_ATTR(kone_driver_version, 0440,
+		kone_sysfs_show_driver_version, NULL);
+
+static struct attribute *kone_attributes[] = {
+		&dev_attr_actual_dpi.attr,
+		&dev_attr_actual_profile.attr,
+		&dev_attr_weight.attr,
+		&dev_attr_firmware_version.attr,
+		&dev_attr_tcu.attr,
+		&dev_attr_startup_profile.attr,
+		&dev_attr_kone_driver_version.attr,
+		NULL
+};
+
+static struct attribute_group kone_attribute_group = {
+		.attrs = kone_attributes
+};
+
+static struct bin_attribute kone_settings_attr = {
+	.attr = { .name = "settings", .mode = 0660 },
+	.size = sizeof(struct kone_settings),
+	.read = kone_sysfs_read_settings,
+	.write = kone_sysfs_write_settings
+};
+
+static struct bin_attribute kone_profile1_attr = {
+	.attr = { .name = "profile1", .mode = 0660 },
+	.size = sizeof(struct kone_profile),
+	.read = kone_sysfs_read_profile1,
+	.write = kone_sysfs_write_profile1
+};
+
+static struct bin_attribute kone_profile2_attr = {
+	.attr = { .name = "profile2", .mode = 0660 },
+	.size = sizeof(struct kone_profile),
+	.read = kone_sysfs_read_profile2,
+	.write = kone_sysfs_write_profile2
+};
+
+static struct bin_attribute kone_profile3_attr = {
+	.attr = { .name = "profile3", .mode = 0660 },
+	.size = sizeof(struct kone_profile),
+	.read = kone_sysfs_read_profile3,
+	.write = kone_sysfs_write_profile3
+};
+
+static struct bin_attribute kone_profile4_attr = {
+	.attr = { .name = "profile4", .mode = 0660 },
+	.size = sizeof(struct kone_profile),
+	.read = kone_sysfs_read_profile4,
+	.write = kone_sysfs_write_profile4
+};
+
+static struct bin_attribute kone_profile5_attr = {
+	.attr = { .name = "profile5", .mode = 0660 },
+	.size = sizeof(struct kone_profile),
+	.read = kone_sysfs_read_profile5,
+	.write = kone_sysfs_write_profile5
+};
+
+static int kone_create_sysfs_attributes(struct usb_interface *intf)
+{
+	int retval;
+
+	retval = sysfs_create_group(&intf->dev.kobj, &kone_attribute_group);
+	if (retval)
+		goto exit_1;
+
+	retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_settings_attr);
+	if (retval)
+		goto exit_2;
+
+	retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile1_attr);
+	if (retval)
+		goto exit_3;
+
+	retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile2_attr);
+	if (retval)
+		goto exit_4;
+
+	retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile3_attr);
+	if (retval)
+		goto exit_5;
+
+	retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile4_attr);
+	if (retval)
+		goto exit_6;
+
+	retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile5_attr);
+	if (retval)
+		goto exit_7;
+
+	return 0;
+
+exit_7:
+	sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile4_attr);
+exit_6:
+	sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile3_attr);
+exit_5:
+	sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile2_attr);
+exit_4:
+	sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile1_attr);
+exit_3:
+	sysfs_remove_bin_file(&intf->dev.kobj, &kone_settings_attr);
+exit_2:
+	sysfs_remove_group(&intf->dev.kobj, &kone_attribute_group);
+exit_1:
+	return retval;
+}
+
+static void kone_remove_sysfs_attributes(struct usb_interface *intf)
+{
+	sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile5_attr);
+	sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile4_attr);
+	sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile3_attr);
+	sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile2_attr);
+	sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile1_attr);
+	sysfs_remove_bin_file(&intf->dev.kobj, &kone_settings_attr);
+	sysfs_remove_group(&intf->dev.kobj, &kone_attribute_group);
+}
+
+static int kone_init_kone_device_struct(struct usb_device *usb_dev,
+		struct kone_device *kone)
+{
+	uint i;
+	int retval;
+
+	mutex_init(&kone->kone_lock);
+
+	for (i = 0; i < 5; ++i) {
+		retval = kone_get_profile(usb_dev, &kone->profiles[i], i + 1);
+		if (retval)
+			return retval;
+	}
+
+	retval = kone_get_settings(usb_dev, &kone->settings);
+	if (retval)
+		return retval;
+
+	retval = kone_get_firmware_version(usb_dev, &kone->firmware_version);
+	if (retval)
+		return retval;
+
+	kone->actual_profile = kone->settings.startup_profile;
+	kone->actual_dpi = kone->profiles[kone->actual_profile].startup_dpi;
+
+	return 0;
+}
+
+/*
+ * Since IGNORE_MOUSE quirk moved to hid-apple, there is no way to bind only to
+ * mousepart if usb_hid is compiled into the kernel and kone is compiled as
+ * module.
+ * Secial behaviour is bound only to mousepart since only mouseevents contain
+ * additional notifications.
+ */
+static int kone_init_specials(struct hid_device *hdev)
+{
+	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct kone_device *kone;
+	int retval;
+
+	if (intf->cur_altsetting->desc.bInterfaceProtocol
+			== USB_INTERFACE_PROTOCOL_MOUSE) {
+
+		kone = kzalloc(sizeof(*kone), GFP_KERNEL);
+		if (!kone) {
+			dev_err(&hdev->dev, "can't alloc device descriptor\n");
+			return -ENOMEM;
+		}
+		hid_set_drvdata(hdev, kone);
+
+		retval = kone_init_kone_device_struct(usb_dev, kone);
+		if (retval) {
+			dev_err(&hdev->dev,
+					"couldn't init struct kone_device\n");
+			goto exit_free;
+		}
+		retval = kone_create_sysfs_attributes(intf);
+		if (retval) {
+			dev_err(&hdev->dev, "cannot create sysfs files\n");
+			goto exit_free;
+		}
+	} else {
+		hid_set_drvdata(hdev, NULL);
+	}
+
+	return 0;
+exit_free:
+	kfree(kone);
+	return retval;
+}
+
+
+static void kone_remove_specials(struct hid_device *hdev)
+{
+	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+
+	if (intf->cur_altsetting->desc.bInterfaceProtocol
+			== USB_INTERFACE_PROTOCOL_MOUSE) {
+		kone_remove_sysfs_attributes(intf);
+		kfree(hid_get_drvdata(hdev));
+	}
+}
+
+static int kone_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int retval;
+
+	retval = hid_parse(hdev);
+	if (retval) {
+		dev_err(&hdev->dev, "parse failed\n");
+		goto exit;
+	}
+
+	retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (retval) {
+		dev_err(&hdev->dev, "hw start failed\n");
+		goto exit;
+	}
+
+	retval = kone_init_specials(hdev);
+	if (retval) {
+		dev_err(&hdev->dev, "couldn't install mouse\n");
+		goto exit_stop;
+	}
+
+	return 0;
+
+exit_stop:
+	hid_hw_stop(hdev);
+exit:
+	return retval;
+}
+
+static void kone_remove(struct hid_device *hdev)
+{
+	kone_remove_specials(hdev);
+	hid_hw_stop(hdev);
+}
+
+/*
+ * Is called for keyboard- and mousepart.
+ * Only mousepart gets informations about special events in its extended event
+ * structure.
+ */
+static int kone_raw_event(struct hid_device *hdev, struct hid_report *report,
+		u8 *data, int size)
+{
+	struct kone_device *kone = hid_get_drvdata(hdev);
+	struct kone_mouse_event *event = (struct kone_mouse_event *)data;
+
+	/* keyboard events are always processed by default handler */
+	if (size != sizeof(struct kone_mouse_event))
+		return 0;
+
+	/*
+	 * Firmware 1.38 introduced new behaviour for tilt buttons.
+	 * Pressed tilt button is reported in each movement event.
+	 * Workaround sends only one event per press.
+	 */
+	if (kone->last_tilt_state == event->tilt)
+		event->tilt = 0;
+	else
+		kone->last_tilt_state = event->tilt;
+
+	/*
+	 * handle special events and keep actual profile and dpi values
+	 * up to date
+	 */
+	switch (event->event) {
+	case kone_mouse_event_osd_dpi:
+		dev_dbg(&hdev->dev, "osd dpi event. actual dpi %d\n",
+				event->value);
+		return 1; /* return 1 if event was handled */
+	case kone_mouse_event_switch_dpi:
+		kone->actual_dpi = event->value;
+		dev_dbg(&hdev->dev, "switched dpi to %d\n", event->value);
+		return 1;
+	case kone_mouse_event_osd_profile:
+		dev_dbg(&hdev->dev, "osd profile event. actual profile %d\n",
+				event->value);
+		return 1;
+	case kone_mouse_event_switch_profile:
+		kone->actual_profile = event->value;
+		kone->actual_dpi = kone->profiles[kone->actual_profile - 1].
+				startup_dpi;
+		dev_dbg(&hdev->dev, "switched profile to %d\n", event->value);
+		return 1;
+	case kone_mouse_event_call_overlong_macro:
+		dev_dbg(&hdev->dev, "overlong macro called, button %d %s/%s\n",
+				event->macro_key,
+				kone->profiles[kone->actual_profile - 1].
+				button_infos[event->macro_key].macro_set_name,
+				kone->profiles[kone->actual_profile - 1].
+				button_infos[event->macro_key].macro_name
+				);
+		return 1;
+	}
+
+	return 0; /* do further processing */
+}
+
+static const struct hid_device_id kone_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) },
+	{ } };
+
+MODULE_DEVICE_TABLE(hid, kone_devices);
+
+static struct hid_driver kone_driver = { .name = "kone",
+		.id_table = kone_devices, .probe = kone_probe,
+		.remove = kone_remove, .raw_event = kone_raw_event, };
+
+static int kone_init(void)
+{
+	return hid_register_driver(&kone_driver);
+}
+
+static void kone_exit(void)
+{
+	hid_unregister_driver(&kone_driver);
+}
+
+module_init(kone_init);
+module_exit(kone_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
diff --git a/drivers/hid/hid-roccat-kone.h b/drivers/hid/hid-roccat-kone.h
new file mode 100644
index 0000000..ee6898c
--- /dev/null
+++ b/drivers/hid/hid-roccat-kone.h
@@ -0,0 +1,214 @@
+#ifndef __HID_ROCCAT_KONE_H
+#define __HID_ROCCAT_KONE_H
+
+/*
+ * Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/types.h>
+
+#define DRIVER_VERSION "v0.3.0"
+#define DRIVER_AUTHOR "Stefan Achatz"
+#define DRIVER_DESC "USB Roccat Kone driver"
+#define DRIVER_LICENSE "GPL v2"
+
+#pragma pack(push)
+#pragma pack(1)
+
+struct kone_keystroke {
+	uint8_t key;
+	uint8_t action;
+	uint16_t period; /* in milliseconds */
+};
+
+enum kone_keystroke_buttons {
+	kone_keystroke_button_1 = 0xf0, /* left mouse button */
+	kone_keystroke_button_2 = 0xf1, /* right mouse button */
+	kone_keystroke_button_3 = 0xf2, /* wheel */
+	kone_keystroke_button_9 = 0xf3, /* side button up */
+	kone_keystroke_button_8 = 0xf4 /* side button down */
+};
+
+enum kone_keystroke_actions {
+	kone_keystroke_action_press = 0,
+	kone_keystroke_action_release = 1
+};
+
+struct kone_button_info {
+	uint8_t number; /* range 1-8 */
+	uint8_t type;
+	uint8_t macro_type; /* 0 = short, 1 = overlong */
+	uint8_t macro_set_name[16]; /* can be max 15 chars long */
+	uint8_t macro_name[16]; /* can be max 15 chars long */
+	uint8_t count;
+	struct kone_keystroke keystrokes[20];
+};
+
+enum kone_button_info_types {
+	/* valid button types until firmware 1.32 */
+	kone_button_info_type_button_1 = 0x1, /* click (left mouse button) */
+	kone_button_info_type_button_2 = 0x2, /* menu (right mouse button)*/
+	kone_button_info_type_button_3 = 0x3, /* scroll (wheel) */
+	kone_button_info_type_double_click = 0x4,
+	kone_button_info_type_key = 0x5,
+	kone_button_info_type_macro = 0x6,
+	kone_button_info_type_off = 0x7,
+	/* TODO clarify function and rename */
+	kone_button_info_type_osd_xy_prescaling = 0x8,
+	kone_button_info_type_osd_dpi = 0x9,
+	kone_button_info_type_osd_profile = 0xa,
+	kone_button_info_type_button_9 = 0xb, /* ie forward */
+	kone_button_info_type_button_8 = 0xc, /* ie backward */
+	kone_button_info_type_dpi_up = 0xd, /* internal */
+	kone_button_info_type_dpi_down = 0xe, /* internal */
+	kone_button_info_type_button_7 = 0xf, /* tilt left */
+	kone_button_info_type_button_6 = 0x10, /* tilt right */
+	kone_button_info_type_profile_up = 0x11, /* internal */
+	kone_button_info_type_profile_down = 0x12, /* internal */
+	/* additional valid button types since firmware 1.38 */
+	kone_button_info_type_multimedia_open_player = 0x20,
+	kone_button_info_type_multimedia_next_track = 0x21,
+	kone_button_info_type_multimedia_prev_track = 0x22,
+	kone_button_info_type_multimedia_play_pause = 0x23,
+	kone_button_info_type_multimedia_stop = 0x24,
+	kone_button_info_type_multimedia_mute = 0x25,
+	kone_button_info_type_multimedia_volume_up = 0x26,
+	kone_button_info_type_multimedia_volume_down = 0x27
+};
+
+struct kone_light_info {
+	uint8_t number; /* number of light 1-5 */
+	uint8_t mod;   /* 1 = on, 2 = off */
+	uint8_t red;   /* range 0x00-0xff */
+	uint8_t green; /* range 0x00-0xff */
+	uint8_t blue;  /* range 0x00-0xff */
+};
+
+struct kone_profile {
+	uint16_t size; /* always 975 */
+	uint16_t unused; /* always 0 */
+
+	/*
+	 * range 1-5
+	 * This number does not need to correspond with location where profile
+	 * saved
+	 */
+	uint8_t profile; /* range 1-5 */
+
+	uint16_t main_sensitivity; /* range 100-1000 */
+	uint8_t xy_sensitivity_enabled; /* 1 = on, 2 = off */
+	uint16_t x_sensitivity; /* range 100-1000 */
+	uint16_t y_sensitivity; /* range 100-1000 */
+	uint8_t dpi_rate; /* bit 1 = 800, ... */
+	uint8_t startup_dpi; /* range 1-6 */
+	uint8_t polling_rate; /* 1 = 125Hz, 2 = 500Hz, 3 = 1000Hz */
+	/* kone has no dcu
+	 * value is always 2 in firmwares <= 1.32 and
+	 * 1 in firmwares > 1.32
+	 */
+	uint8_t dcu_flag;
+	uint8_t light_effect_1; /* range 1-3 */
+	uint8_t light_effect_2; /* range 1-5 */
+	uint8_t light_effect_3; /* range 1-4 */
+	uint8_t light_effect_speed; /* range 0-255 */
+
+	struct kone_light_info light_infos[5];
+	struct kone_button_info button_infos[8];
+
+	uint16_t checksum; /* \brief holds checksum of struct */
+};
+
+enum kone_polling_rates {
+	kone_polling_rate_125 = 1,
+	kone_polling_rate_500 = 2,
+	kone_polling_rate_1000 = 3
+};
+
+struct kone_settings {
+	uint16_t size; /* always 36 */
+	uint8_t  startup_profile; /* 1-5 */
+	uint8_t	 unknown1;
+	uint8_t  tcu; /* 0 = off, 1 = on */
+	uint8_t  unknown2[23];
+	uint8_t  calibration_data[4];
+	uint8_t  unknown3[2];
+	uint16_t checksum;
+};
+
+/*
+ * 12 byte mouse event read by interrupt_read
+ */
+struct kone_mouse_event {
+	uint8_t report_number; /* always 1 */
+	uint8_t button;
+	uint16_t x;
+	uint16_t y;
+	uint8_t wheel; /* up = 1, down = -1 */
+	uint8_t tilt; /* right = 1, left = -1 */
+	uint8_t unknown;
+	uint8_t event;
+	uint8_t value; /* press = 0, release = 1 */
+	uint8_t macro_key; /* 0 to 8 */
+};
+
+enum kone_mouse_events {
+	/* osd events are thought to be display on screen */
+	kone_mouse_event_osd_dpi = 0xa0,
+	kone_mouse_event_osd_profile = 0xb0,
+	/* TODO clarify meaning and occurence of kone_mouse_event_calibration */
+	kone_mouse_event_calibration = 0xc0,
+	kone_mouse_event_call_overlong_macro = 0xe0,
+	/* switch events notify if user changed values wiht mousebutton click */
+	kone_mouse_event_switch_dpi = 0xf0,
+	kone_mouse_event_switch_profile = 0xf1
+};
+
+enum kone_commands {
+	kone_command_profile = 0x5a,
+	kone_command_settings = 0x15a,
+	kone_command_firmware_version = 0x25a,
+	kone_command_weight = 0x45a,
+	kone_command_calibrate = 0x55a,
+	kone_command_confirm_write = 0x65a,
+	kone_command_firmware = 0xe5a
+};
+
+#pragma pack(pop)
+
+struct kone_device {
+	/*
+	 * Storing actual values when we get informed about changes since there
+	 * is no way of getting this information from the device on demand
+	 */
+	int actual_profile, actual_dpi;
+	/* Used for neutralizing abnormal tilt button behaviour */
+	int last_tilt_state;
+	/*
+	 * It's unlikely that multiple sysfs attributes are accessed at a time,
+	 * so only one mutex is used to secure hardware access and profiles and
+	 * settings of this struct.
+	 */
+	struct mutex kone_lock;
+
+	/*
+	 * Storing the data here reduces IO and ensures that data is available
+	 * when its needed (E.g. interrupt handler).
+	 */
+	struct kone_profile profiles[5];
+	struct kone_settings settings;
+
+	/*
+	 * firmware doesn't change unless firmware update is implemented,
+	 * so it's read only once
+	 */
+	int firmware_version;
+};
+
+#endif
