@@ -482,6 +482,14 @@ config MFD_JANZ_CMODIO
host many different types of MODULbus daughterboards, including
CAN and GPIO controllers.
+config MFD_STMPE811
+ tristate "STMicroelectronics STMPE811"
+ depends on I2C
+ select MFD_CORE
+ help
+ This is the core driver for the stmpe811 GPIO expander with touchscreen
+ controller, ADC and temperature sensor.
+
endif # MFD_SUPPORT
menu "Multimedia Capabilities Port drivers"
@@ -71,3 +71,4 @@ obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
obj-$(CONFIG_LPC_SCH) += lpc_sch.o
obj-$(CONFIG_MFD_RDC321X) += rdc321x-southbridge.o
obj-$(CONFIG_MFD_JANZ_CMODIO) += janz-cmodio.o
+obj-$(CONFIG_MFD_STMPE811) += stmpe811-core.o
new file mode 100644
@@ -0,0 +1,393 @@
+/*
+ * stmpe811-core.c -- core support for STMicroelectronics STMPE811 chip.
+ *
+ * based on pcf50633-core.c by Harald Welte <laforge@openmoko.org> and
+ * Balaji Rao <balajirrao@openmoko.org>
+ *
+ * (c)2010 Luotao Fu <l.fu@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/irq.h>
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/stmpe811.h>
+
+static struct mfd_cell stmpe811_ts_dev = {
+ .name = "stmpe811-ts",
+};
+
+static struct mfd_cell stmpe811_gpio_dev = {
+ .name = "stmpe811-gpio",
+};
+
+static void stmpe811_mask_work(struct work_struct *work)
+{
+ struct stmpe811 *stm = container_of(work, struct stmpe811, mask_work);
+
+ stmpe811_reg_write(stm, STMPE811_REG_INT_EN, stm->int_en_mask);
+
+ mutex_unlock(&stm->irq_mask_lock);
+}
+
+static void stmpe811_irq_mask(unsigned int irq)
+{
+ struct stmpe811 *stm = get_irq_chip_data(irq);
+ irq -= stm->irq_base;
+
+ mutex_lock(&stm->irq_mask_lock);
+
+ clear_bit(irq, &stm->int_en_mask);
+ schedule_work(&stm->mask_work);
+}
+
+static void stmpe811_irq_unmask(unsigned int irq)
+{
+ struct stmpe811 *stm = get_irq_chip_data(irq);
+ irq -= stm->irq_base;
+
+ mutex_lock(&stm->irq_mask_lock);
+
+ set_bit(irq, &stm->int_en_mask);
+ schedule_work(&stm->mask_work);
+}
+
+static struct irq_chip stmpe811_irq_chip = {
+ .name = "stmpe811",
+ .mask = stmpe811_irq_mask,
+ .unmask = stmpe811_irq_unmask,
+};
+
+static int stmpe811_irq_init(struct stmpe811 *stm)
+{
+ struct stmpe811_platform_data *pdata = stm->pdata;
+ int base = stm->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + STMPE811_NUM_IRQ; irq++) {
+ set_irq_chip_data(irq, stm);
+ set_irq_chip_and_handler(irq, &stmpe811_irq_chip,
+ handle_edge_irq);
+ set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ }
+
+ /* setup platform specific interrupt control flags and enable global
+ * interrupt */
+ stmpe811_reg_write(stm, STMPE811_REG_INT_CTRL,
+ STMPE811_INT_CTRL_GLOBAL_INT | pdata->int_conf);
+
+ return 0;
+}
+
+static void stmpe811_irq_remove(struct stmpe811 *stm)
+{
+ int base = stm->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + STMPE811_NUM_IRQ; irq++) {
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, 0);
+#endif
+ set_irq_chip_and_handler(irq, NULL, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+}
+
+static irqreturn_t stmpe811_irq(int irq, void *data)
+{
+ struct stmpe811 *stm = data;
+ int ret, bit;
+ u8 int_stat;
+
+ ret = stmpe811_reg_read(stm, STMPE811_REG_INT_STA, &int_stat);
+ if (ret) {
+ dev_err(stm->dev, "Error reading INT registers\n");
+ return IRQ_NONE;
+ }
+
+ dev_dbg(stm->dev, "%s int_stat 0x%02x\n", __func__, int_stat);
+
+ for_each_set_bit(bit, (unsigned long *)&int_stat, STMPE811_NUM_IRQ) {
+ /* mask the interrupt while calling handler */
+ stmpe811_reg_clear_bits(stm, STMPE811_REG_INT_EN, 1 << bit);
+
+ handle_nested_irq(stm->irq_base + bit);
+
+ /* acknowledge the interrupt */
+ stmpe811_reg_set_bits(stm, STMPE811_REG_INT_STA, 1 << bit);
+ /* demask the interrupt */
+ stmpe811_reg_set_bits(stm, STMPE811_REG_INT_EN, 1 << bit);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static inline int __stmpe811_i2c_reads(struct i2c_client *client, int reg,
+ int len, u8 *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_i2c_block_data(client, reg, len, val);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed reading from 0x%02x\n", reg);
+ return ret;
+ }
+ return 0;
+}
+
+static inline int __stmpe811_i2c_read(struct i2c_client *client,
+ int reg, u8 *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed reading at 0x%02x\n", reg);
+ return ret;
+ }
+ dev_dbg(&client->dev, "%s: value 0x%x from 0x%x\n", __func__, ret, reg);
+
+ *val = (u8) ret;
+ return 0;
+}
+
+static inline int __stmpe811_i2c_write(struct i2c_client *client,
+ int reg, u8 val)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(client, reg, val);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed writing 0x%02x to 0x%02x\n",
+ val, reg);
+ return ret;
+ }
+ return 0;
+}
+
+int stmpe811_block_read(struct stmpe811 *stm, u8 reg, uint len, u8 *val)
+{
+ int ret;
+
+ mutex_lock(&stm->io_lock);
+ ret = __stmpe811_i2c_reads(stm->i2c_client, reg, len, val);
+ mutex_unlock(&stm->io_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe811_block_read);
+
+int stmpe811_reg_read(struct stmpe811 *stm, u8 reg, u8 *val)
+{
+ int ret;
+
+ mutex_lock(&stm->io_lock);
+ ret = __stmpe811_i2c_read(stm->i2c_client, reg, val);
+ mutex_unlock(&stm->io_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe811_reg_read);
+
+int stmpe811_reg_write(struct stmpe811 *stm, u8 reg, u8 val)
+{
+ int ret;
+
+ mutex_lock(&stm->io_lock);
+ ret = __stmpe811_i2c_write(stm->i2c_client, reg, val);
+ mutex_unlock(&stm->io_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe811_reg_write);
+
+int stmpe811_reg_set_bits(struct stmpe811 *stm, u8 reg, u8 val)
+{
+ int ret;
+ u8 tmp;
+
+ mutex_lock(&stm->io_lock);
+ ret = __stmpe811_i2c_read(stm->i2c_client, reg, &tmp);
+ if (ret < 0)
+ goto out;
+
+ tmp |= val;
+ ret = __stmpe811_i2c_write(stm->i2c_client, reg, tmp);
+
+out:
+ mutex_unlock(&stm->io_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe811_reg_set_bits);
+
+int stmpe811_reg_clear_bits(struct stmpe811 *stm, u8 reg, u8 val)
+{
+ int ret;
+ u8 tmp;
+
+ mutex_lock(&stm->io_lock);
+ ret = __stmpe811_i2c_read(stm->i2c_client, reg, &tmp);
+ if (ret < 0)
+ goto out;
+
+ tmp &= ~val;
+ ret = __stmpe811_i2c_write(stm->i2c_client, reg, tmp);
+
+out:
+ mutex_unlock(&stm->io_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe811_reg_clear_bits);
+
+static int __devinit stmpe811_probe(struct i2c_client *client,
+ const struct i2c_device_id *ids)
+{
+ struct stmpe811 *stm;
+ struct stmpe811_platform_data *pdata = client->dev.platform_data;
+ int ret = 0;
+ u8 chip_id[2], chip_ver = 0;
+
+ if (!client->irq) {
+ dev_err(&client->dev, "Missing IRQ\n");
+ return -ENOENT;
+ }
+
+ stm = kzalloc(sizeof(*stm), GFP_KERNEL);
+ if (!stm)
+ return -ENOMEM;
+
+ stm->pdata = pdata;
+
+ mutex_init(&stm->io_lock);
+ mutex_init(&stm->irq_mask_lock);
+
+ i2c_set_clientdata(client, stm);
+ stm->dev = &client->dev;
+ stm->i2c_client = client;
+ stm->irq = client->irq;
+ stm->irq_base = pdata->irq_base;
+
+ INIT_WORK(&stm->mask_work, stmpe811_mask_work);
+
+ ret = stmpe811_block_read(stm, STMPE811_REG_CHIP_ID, 2, chip_id);
+ if ((ret < 0) || (((chip_id[0] << 8) | chip_id[1]) != 0x811)) {
+ dev_err(&client->dev, "could not verify stmpe811 chip id\n");
+ ret = -ENODEV;
+ goto err_free;
+ }
+
+ stmpe811_reg_read(stm, STMPE811_REG_ID_VER, &chip_ver);
+ dev_info(&client->dev, "found stmpe811 chip id 0x%x version 0x%x\n",
+ (chip_id[0] << 8) | chip_id[1], chip_ver);
+
+ /* reset the device */
+ stmpe811_reg_write(stm, STMPE811_REG_SYS_CTRL1,
+ STMPE811_SYS_CTRL1_SOFT_RESET);
+
+ stmpe811_irq_init(stm);
+
+ ret = request_threaded_irq(client->irq, NULL, stmpe811_irq,
+ pdata->irq_flags, "stmpe811", stm);
+ if (ret) {
+ dev_err(&client->dev, "failed to request IRQ: %d\n", ret);
+ goto err_free;
+ }
+
+ if (pdata->flags & STMPE811_USE_TS)
+ ret =
+ mfd_add_devices(&client->dev, -1, &stmpe811_ts_dev, 1, NULL,
+ 0);
+ if (ret != 0)
+ goto err_release_irq;
+
+ if (pdata->flags & STMPE811_USE_GPIO)
+ ret =
+ mfd_add_devices(&client->dev, -1, &stmpe811_gpio_dev, 1,
+ NULL, 0);
+ if (ret != 0)
+ dev_err(&client->dev, "Unable to add mfd subdevices\n");
+
+ return ret;
+
+err_release_irq:
+ free_irq(client->irq, stm);
+err_free:
+ mutex_destroy(&stm->io_lock);
+ mutex_destroy(&stm->irq_mask_lock);
+
+ kfree(stm);
+
+ return ret;
+}
+
+static int __devexit stmpe811_remove(struct i2c_client *client)
+{
+ struct stmpe811 *stm = i2c_get_clientdata(client);
+
+ flush_work(&stm->mask_work);
+ stmpe811_reg_write(stm, STMPE811_REG_SYS_CTRL1,
+ STMPE811_SYS_CTRL1_HIBERNATE);
+
+ stmpe811_irq_remove(stm);
+ free_irq(stm->irq, stm);
+
+ mutex_destroy(&stm->io_lock);
+ mutex_destroy(&stm->irq_mask_lock);
+
+ mfd_remove_devices(&client->dev);
+
+ kfree(stm);
+
+ return 0;
+}
+
+static struct i2c_device_id stmpe811_id_table[] = {
+ {"stmpe811", 0},
+ { /* end of list */ }
+};
+
+static struct i2c_driver stmpe811_driver = {
+ .driver = {
+ .name = "stmpe811",
+ .owner = THIS_MODULE,
+ },
+ .probe = stmpe811_probe,
+ .remove = __devexit_p(stmpe811_remove),
+ .id_table = stmpe811_id_table,
+};
+
+static int __init stmpe811_init(void)
+{
+ return i2c_add_driver(&stmpe811_driver);
+}
+
+subsys_initcall(stmpe811_init);
+
+static void __exit stmpe811_exit(void)
+{
+ i2c_del_driver(&stmpe811_driver);
+}
+
+module_exit(stmpe811_exit);
+
+MODULE_DESCRIPTION
+ ("CORE Driver for STMPE811 Touch screen controller with GPIO expander");
+MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,119 @@
+#ifndef __LINUX_MFD_STMPE811_H
+#define __LINUX_MFD_STMPE811_H
+
+#define STMPE811_REG_CHIP_ID 0x00
+#define STMPE811_REG_ID_VER 0x02
+#define STMPE811_REG_SYS_CTRL1 0x03
+#define STMPE811_REG_SYS_CTRL2 0x04
+#define STMPE811_REG_SPI_CFG 0x08
+#define STMPE811_REG_INT_CTRL 0x09
+#define STMPE811_REG_INT_EN 0x0A
+#define STMPE811_REG_INT_STA 0x0B
+#define STMPE811_REG_GPIO_EN 0x0C
+#define STMPE811_REG_GPIO_INT_STA 0x0D
+#define STMPE811_REG_ADC_INT_EN 0x0E
+#define STMPE811_REG_ADC_INT_STA 0x0F
+#define STMPE811_REG_GPIO_SET_PIN 0x10
+#define STMPE811_REG_GPIO_CLR_PIN 0x11
+#define STMPE811_REG_GPIO_MP_STA 0x12
+#define STMPE811_REG_GPIO_DIR 0x13
+#define STMPE811_REG_GPIO_ED 0x14
+#define STMPE811_REG_GPIO_RE 0x15
+#define STMPE811_REG_GPIO_FE 0x16
+#define STMPE811_REG_GPIO_AF 0x17
+#define STMPE811_REG_ADC_CTRL1 0x20
+#define STMPE811_REG_ADC_CTRL2 0x21
+#define STMPE811_REG_ADC_CAPT 0x22
+#define STMPE811_REG_ADC_DATA_CH0 0x30
+#define STMPE811_REG_ADC_DATA_CH1 0x32
+#define STMPE811_REG_ADC_DATA_CH2 0x34
+#define STMPE811_REG_ADC_DATA_CH3 0x36
+#define STMPE811_REG_ADC_DATA_CH4 0x38
+#define STMPE811_REG_ADC_DATA_CH5 0x3A
+#define STMPE811_REG_ADC_DATA_CH6 0x3C
+#define STMPE811_REG_ADC_DATA_CH7 0x3E
+#define STMPE811_REG_TSC_CTRL 0x40
+#define STMPE811_REG_TSC_CFG 0x41
+#define STMPE811_REG_WDW_TR_X 0x42
+#define STMPE811_REG_WDW_TR_Y 0x44
+#define STMPE811_REG_WDW_BL_X 0x46
+#define STMPE811_REG_WDW_BL_Y 0x48
+#define STMPE811_REG_FIFO_TH 0x4A
+#define STMPE811_REG_FIFO_STA 0x4B
+#define STMPE811_REG_FIFO_SIZE 0x4C
+#define STMPE811_REG_TSC_DATA_X 0x4D
+#define STMPE811_REG_TSC_DATA_Y 0x4F
+#define STMPE811_REG_TSC_DATA_Z 0x51
+#define STMPE811_REG_TSC_DATA_XYZ 0x52
+#define STMPE811_REG_TSC_FRACTION_Z 0x56
+#define STMPE811_REG_TSC_DATA 0x57
+#define STMPE811_REG_TSC_DATA_SINGLE 0xD7
+#define STMPE811_REG_TSC_I_DRIVE 0x58
+#define STMPE811_REG_TSC_SHIELD 0x59
+#define STMPE811_REG_TEMP_CTRL 0x60
+
+#define STMPE811_SYS_CTRL1_HIBERNATE (1<<0)
+#define STMPE811_SYS_CTRL1_SOFT_RESET (1<<1)
+
+#define STMPE811_SYS_CTRL2_ADC_OFF (1<<0)
+#define STMPE811_SYS_CTRL2_TSC_OFF (1<<1)
+#define STMPE811_SYS_CTRL2_GPIO_OFF (1<<2)
+#define STMPE811_SYS_CTRL2_TS_OFF (1<<3)
+
+#define STMPE811_INT_CTRL_GLOBAL_INT (1<<0)
+#define STMPE811_INT_CTRL_INT_TYPE (1<<1)
+#define STMPE811_INT_CTRL_INT_POLARITY (1<<2)
+
+#define STMPE811_FIFO_STA_OFLOW (1<<7)
+#define STMPE811_FIFO_STA_FULL (1<<6)
+#define STMPE811_FIFO_STA_EMPTY (1<<5)
+#define STMPE811_FIFO_STA_TH_TRIG (1<<4)
+#define STMPE811_FIFO_STA_RESET (1<<0)
+
+#define STMPE811_USE_TS (1<<0)
+#define STMPE811_USE_GPIO (1<<1)
+
+#define STMPE811_IRQ_TOUCH_DET 0
+#define STMPE811_IRQ_FIFO_TH 1
+#define STMPE811_IRQ_FIFO_OFLOW 2
+#define STMPE811_IRQ_FIFO_FULL 3
+#define STMPE811_IRQ_FIFO_EMPTY 4
+#define STMPE811_IRQ_TEMP_SENS 5
+#define STMPE811_IRQ_ADC 6
+#define STMPE811_IRQ_GPIO 7
+#define STMPE811_NUM_IRQ 8
+
+struct stmpe811 {
+ struct device *dev;
+ struct i2c_client *i2c_client;
+ struct work_struct mask_work;
+ struct stmpe811_platform_data *pdata;
+ struct mutex io_lock;
+ struct mutex irq_mask_lock;
+ unsigned int irq;
+ int irq_base;
+ unsigned long int_en_mask;
+ u8 active_flag;
+};
+
+struct stmpe811_gpio_platform_data {
+ unsigned int gpio_base;
+ int (*setup) (struct stmpe811 *stm);
+ void (*remove) (struct stmpe811 *stm);
+};
+
+struct stmpe811_platform_data {
+ unsigned int flags;
+ unsigned int irq_flags;
+ unsigned int int_conf;
+ int irq_base;
+ struct stmpe811_gpio_platform_data *gpio_pdata;
+};
+
+int stmpe811_block_read(struct stmpe811 *stm, u8 reg, uint len, u8 *val);
+int stmpe811_reg_read(struct stmpe811 *pcf, u8 reg, u8 *val);
+int stmpe811_reg_write(struct stmpe811 *stm, u8 reg, u8 val);
+int stmpe811_reg_set_bits(struct stmpe811 *stm, u8 reg, u8 val);
+int stmpe811_reg_clear_bits(struct stmpe811 *stm, u8 reg, u8 val);
+
+#endif