@@ -603,4 +603,14 @@ config TOUCHSCREEN_TPS6507X
To compile this driver as a module, choose M here: the
module will be called tps6507x_ts.
+config TOUCHSCREEN_STMPE811
+ tristate "STMicroelectronics STMPE811 touchscreen"
+ depends on MFD_STMPE811
+ help
+ Say Y here if you want support for STMicroelectronics
+ STMPE811 based touchscreen controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stmpe811_ts.
+
endif
@@ -47,3 +47,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
+obj-$(CONFIG_TOUCHSCREEN_STMPE811) += stmpe811_ts.o
new file mode 100644
@@ -0,0 +1,361 @@
+/* STMicroelectronics STMPE811 Touchscreen Driver
+ *
+ * (C) 2010 Luotao Fu <l.fu@pengutronix.de>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+
+#include <linux/mfd/stmpe811.h>
+
+#define STMPE811_TSC_CTRL_OP_MOD_XYZ (0<<1)
+#define STMPE811_TSC_CTRL_OP_MOD_XY (1<<1)
+#define STMPE811_TSC_CTRL_OP_MOD_X (2<<1)
+#define STMPE811_TSC_CTRL_OP_MOD_Y (3<<1)
+#define STMPE811_TSC_CTRL_OP_MOD_Z (4<<1)
+
+#define STMPE811_TSC_CTRL_TSC_STA (1<<7)
+#define STMPE811_TSC_CTRL_TSC_EN (1<<0)
+
+#define SAMPLE_TIME(x) ((x & 0xf) << 4)
+#define MOD_12B(x) ((x & 0x1) << 3)
+#define REF_SEL(x) ((x & 0x1) << 1)
+#define ADC_FREQ(x) (x & 0x3)
+#define AVE_CTRL(x) ((x & 0x3) << 6)
+#define DET_DELAY(x) ((x & 0x7) << 3)
+#define SETTLING(x) ((x & 0x7))
+#define FRACTION_Z(x) ((x & 0x7))
+
+#define STMPE811_TS_NAME "stmpe811-ts"
+#define XY_MASK 0xfff
+
+struct stmpe811_touch {
+ struct stmpe811 *stm;
+ struct input_dev *idev;
+ struct delayed_work work;
+ u8 sample_time;
+ u8 mod_12b;
+ u8 ref_sel;
+ u8 adc_freq;
+ u8 ave_ctrl;
+ u8 touch_det_delay;
+ u8 settling;
+ u8 fraction_z;
+};
+
+static void stmpe811_work(struct work_struct *work)
+{
+ u8 int_sta;
+ u32 timeout = 40;
+
+ struct stmpe811_touch *ts =
+ container_of(work, struct stmpe811_touch, work.work);
+
+ stmpe811_reg_read(ts->stm, STMPE811_REG_INT_STA, &int_sta);
+
+ /* touch_det sometimes get desasserted or just get stuck. This appears
+ * to be a silicon bug, We still have to clearify this with the
+ * manufacture. As a workaround We release the key anyway if the
+ * touch_det keeps coming in after 4ms, while the FIFO contains no value
+ * during the whole time. */
+ while ((int_sta & (1 << STMPE811_IRQ_TOUCH_DET)) && (timeout > 0)) {
+ timeout--;
+ stmpe811_reg_read(ts->stm, STMPE811_REG_INT_STA, &int_sta);
+ udelay(100);
+ }
+
+ /* reset the FIFO before we report release event */
+ stmpe811_reg_set_bits(ts->stm, STMPE811_REG_FIFO_STA,
+ STMPE811_FIFO_STA_RESET);
+ stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_FIFO_STA,
+ STMPE811_FIFO_STA_RESET);
+
+ input_report_abs(ts->idev, ABS_PRESSURE, 0);
+ input_sync(ts->idev);
+}
+
+static irqreturn_t stmpe811_ts_handler(int irq, void *data)
+{
+ u8 data_set[4];
+ int x, y, z;
+ struct stmpe811_touch *ts = data;
+
+ /* Cancel polling for release if we have new value available. Wait for
+ * canceling till io operation in the work is finished. */
+ mutex_lock(&ts->stm->io_lock);
+ cancel_delayed_work(&ts->work);
+ mutex_unlock(&ts->stm->io_lock);
+
+ /*
+ * The FIFO sometimes just crashes and stops generating interrupts. This
+ * appears to be a silicon bug. We still have to clearify this with
+ * the manufacture. As a workaround we disable the TSC while we are
+ * collecting data and flush the FIFO after reading
+ */
+ stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_TSC_CTRL,
+ STMPE811_TSC_CTRL_TSC_EN);
+
+ stmpe811_block_read(ts->stm, STMPE811_REG_TSC_DATA_XYZ, 4, data_set);
+
+ x = (data_set[0] << 4) | (data_set[1] >> 4);
+ y = ((data_set[1] & 0xf) << 8) | data_set[2];
+ z = data_set[3];
+
+ input_report_abs(ts->idev, ABS_X, x);
+ input_report_abs(ts->idev, ABS_Y, y);
+ input_report_abs(ts->idev, ABS_PRESSURE, z);
+ input_sync(ts->idev);
+
+ /* flush the FIFO after we have read out our values. */
+ stmpe811_reg_set_bits(ts->stm, STMPE811_REG_FIFO_STA,
+ STMPE811_FIFO_STA_RESET);
+ stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_FIFO_STA,
+ STMPE811_FIFO_STA_RESET);
+
+ /* reenable the tsc */
+ stmpe811_reg_set_bits(ts->stm, STMPE811_REG_TSC_CTRL,
+ STMPE811_TSC_CTRL_TSC_EN);
+
+ /* start polling for touch_det to detect release */
+ schedule_delayed_work(&ts->work, HZ / 50);
+
+ return IRQ_HANDLED;
+}
+
+static int stmpe811_ts_open(struct input_dev *dev)
+{
+ struct stmpe811_touch *ts = input_get_drvdata(dev);
+ int ret = 0;
+
+ ret = stmpe811_reg_set_bits(ts->stm, STMPE811_REG_FIFO_STA,
+ STMPE811_FIFO_STA_RESET);
+ if (ret)
+ goto out;
+
+ ret = stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_FIFO_STA,
+ STMPE811_FIFO_STA_RESET);
+ if (ret)
+ goto out;
+
+ ret = stmpe811_reg_set_bits(ts->stm, STMPE811_REG_TSC_CTRL,
+ STMPE811_TSC_CTRL_TSC_EN);
+ if (ret)
+ goto out;
+
+out:
+ return ret;
+}
+
+static void stmpe811_ts_close(struct input_dev *dev)
+{
+ struct stmpe811_touch *ts = input_get_drvdata(dev);
+
+ stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_TSC_CTRL,
+ STMPE811_TSC_CTRL_TSC_EN);
+}
+
+static int __devinit stmpe811_input_probe(struct platform_device *pdev)
+{
+ struct stmpe811 *stm = dev_get_drvdata(pdev->dev.parent);
+ struct stmpe811_platform_data *pdata = stm->pdata;
+ struct stmpe811_touch *ts;
+ struct input_dev *idev;
+ struct stmpe811_ts_platform_data *ts_pdata = NULL;
+
+ int ret = 0;
+ unsigned int ts_irq;
+
+ ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ goto err_out;
+
+ idev = input_allocate_device();
+ if (!idev)
+ goto err_free_ts;
+
+ platform_set_drvdata(pdev, ts);
+ ts->stm = stm;
+ ts->idev = idev;
+
+ if (pdata)
+ ts_pdata = pdata->ts_pdata;
+
+ if (ts_pdata) {
+ ts->sample_time = ts_pdata->sample_time;
+ ts->mod_12b = ts_pdata->mod_12b;
+ ts->ref_sel = ts_pdata->ref_sel;
+ ts->adc_freq = ts_pdata->adc_freq;
+ ts->ave_ctrl = ts_pdata->ave_ctrl;
+ ts->touch_det_delay = ts_pdata->touch_det_delay;
+ ts->settling = ts_pdata->settling;
+ ts->fraction_z = ts_pdata->fraction_z;
+ }
+
+ INIT_DELAYED_WORK(&ts->work, stmpe811_work);
+
+ ts_irq = stm->irq_base + STMPE811_IRQ_FIFO_TH;
+ ret = request_threaded_irq(ts_irq, NULL, stmpe811_ts_handler,
+ IRQF_ONESHOT, STMPE811_TS_NAME, ts);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request IRQ %d\n", ts_irq);
+ goto err_free_input;
+ }
+
+ ret = stmpe811_reg_clear_bits(stm, STMPE811_REG_SYS_CTRL2,
+ (STMPE811_SYS_CTRL2_ADC_OFF |
+ STMPE811_SYS_CTRL2_TSC_OFF));
+ if (ret) {
+ dev_err(&pdev->dev, "Could not enable clock for ADC and TS\n");
+ goto err_free_irq;
+ }
+
+ ret = stmpe811_reg_set_bits(stm, STMPE811_REG_ADC_CTRL1,
+ SAMPLE_TIME(ts->sample_time) |
+ MOD_12B(ts->mod_12b) | REF_SEL(ts->ref_sel));
+ if (ret) {
+ dev_err(&pdev->dev, "Could not setup ADC\n");
+ goto err_free_irq;
+ }
+
+ ret = stmpe811_reg_set_bits(stm, STMPE811_REG_ADC_CTRL2,
+ ADC_FREQ(ts->adc_freq));
+ if (ret) {
+ dev_err(&pdev->dev, "Could not setup ADC\n");
+ goto err_free_irq;
+ }
+
+ ret = stmpe811_reg_set_bits(stm, STMPE811_REG_TSC_CFG,
+ AVE_CTRL(ts->ave_ctrl) |
+ DET_DELAY(ts->touch_det_delay) |
+ SETTLING(ts->settling));
+ if (ret) {
+ dev_err(&pdev->dev, "Could not config touch\n");
+ goto err_free_irq;
+ }
+
+ ret = stmpe811_reg_set_bits(stm,
+ STMPE811_REG_TSC_FRACTION_Z,
+ FRACTION_Z(ts->fraction_z));
+ if (ret) {
+ dev_err(&pdev->dev, "Could not config touch\n");
+ goto err_free_irq;
+ }
+
+ /* set FIFO to 1 for single point reading */
+ ret = stmpe811_reg_write(stm, STMPE811_REG_FIFO_TH, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not set FIFO\n");
+ goto err_free_irq;
+ }
+
+ ret = stmpe811_reg_set_bits(stm, STMPE811_REG_TSC_CTRL,
+ STMPE811_TSC_CTRL_OP_MOD_XYZ);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not set mode\n");
+ goto err_free_irq;
+ }
+
+ idev->name = STMPE811_TS_NAME;
+ idev->id.bustype = BUS_I2C;
+ idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ idev->open = stmpe811_ts_open;
+ idev->close = stmpe811_ts_close;
+
+ input_set_drvdata(idev, ts);
+
+ ret = input_register_device(idev);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not register input device\n");
+ goto err_free_irq;
+ }
+
+ stm->active_flag |= STMPE811_USE_TS;
+
+ input_set_abs_params(idev, ABS_X, 0, XY_MASK, 0, 0);
+ input_set_abs_params(idev, ABS_Y, 0, XY_MASK, 0, 0);
+ input_set_abs_params(idev, ABS_PRESSURE, 0x0, 0xff, 0, 0);
+
+ return ret;
+
+err_free_irq:
+ free_irq(ts_irq, ts);
+err_free_input:
+ input_free_device(idev);
+ platform_set_drvdata(pdev, NULL);
+err_free_ts:
+ kfree(ts);
+err_out:
+ return ret;
+}
+
+static int __devexit stmpe811_ts_remove(struct platform_device *pdev)
+{
+ struct stmpe811_touch *ts = platform_get_drvdata(pdev);
+ unsigned int ts_irq = ts->stm->irq_base + STMPE811_IRQ_FIFO_TH;
+
+ cancel_delayed_work(&ts->work);
+
+ stmpe811_reg_write(ts->stm, STMPE811_REG_FIFO_TH, 0);
+
+ stmpe811_reg_set_bits(ts->stm, STMPE811_REG_SYS_CTRL2,
+ (STMPE811_SYS_CTRL2_ADC_OFF |
+ STMPE811_SYS_CTRL2_ADC_OFF));
+
+ free_irq(ts_irq, ts);
+
+ ts->stm->active_flag &= ~STMPE811_USE_TS;
+ platform_set_drvdata(pdev, NULL);
+
+ input_unregister_device(ts->idev);
+ input_free_device(ts->idev);
+
+ kfree(ts);
+
+ return 0;
+}
+
+static struct platform_driver stmpe811_input_driver = {
+ .driver = {
+ .name = STMPE811_TS_NAME,
+ },
+ .probe = stmpe811_input_probe,
+ .remove = __devexit_p(stmpe811_ts_remove),
+};
+
+static int __init stmpe811_input_init(void)
+{
+ return platform_driver_register(&stmpe811_input_driver);
+}
+
+module_init(stmpe811_input_init);
+
+static void __exit stmpe811_input_exit(void)
+{
+ platform_driver_unregister(&stmpe811_input_driver);
+}
+
+module_exit(stmpe811_input_exit);
+
+MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
+MODULE_DESCRIPTION("STMPE811 touchscreen driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" STMPE811_TS_NAME);
@@ -94,6 +94,44 @@ struct stmpe811 {
};
/**
+ * struct stmpe811_ts_platform_data - stmpe811 touch screen controller platform
+ * data
+ * @sample_time: ADC converstion time in number of clock.
+ * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
+ * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
+ * recommended is 4.
+ * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
+ * @ref_sel: ADC reference source
+ * (0 -> internal reference, 1 -> external reference)
+ * @adc_freq: ADC Clock speed
+ * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
+ * @ave_ctrl: Sample average control
+ * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
+ * @touch_det_delay: Touch detect interrupt delay
+ * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
+ * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
+ * recommended is 3
+ * @settling: Panel driver settling time
+ * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
+ * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
+ * recommended is 2
+ * @fraction_z: Length of the fractional part in z
+ * (fraction_z ([0..7]) = Count of the fractional part)
+ * recommended is 7
+ *
+ * */
+struct stmpe811_ts_platform_data {
+ u8 sample_time;
+ u8 mod_12b;
+ u8 ref_sel;
+ u8 adc_freq;
+ u8 ave_ctrl;
+ u8 touch_det_delay;
+ u8 settling;
+ u8 fraction_z;
+};
+
+/**
* struct stmpe811_gpio_platform_data - stmpe811 gpio controller platform data
*
* @gpio_base: number of the chip's first GPIO
@@ -116,6 +154,7 @@ struct stmpe811_gpio_platform_data {
* @irq_base: board dependt irq number of the first irq for the irq chip
* @gpio_pdata: pointer to gpio controller platform data
* registered by the core.
+ * @ts_pdata: pointer to touch screen controller platform data
*
* */
struct stmpe811_platform_data {
@@ -126,6 +165,7 @@ struct stmpe811_platform_data {
unsigned int irq_rev_pol;
int irq_base;
struct stmpe811_gpio_platform_data *gpio_pdata;
+ struct stmpe811_ts_platform_data *ts_pdata;
};
int stmpe811_block_read(struct stmpe811 *stm, u8 reg, uint len, u8 *val);