From patchwork Tue Jun 15 09:00:46 2010 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Luotao Fu X-Patchwork-Id: 106172 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter.kernel.org (8.14.3/8.14.3) with ESMTP id o5F91fIv032741 for ; Tue, 15 Jun 2010 09:01:43 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756978Ab0FOJBQ (ORCPT ); Tue, 15 Jun 2010 05:01:16 -0400 Received: from metis.ext.pengutronix.de ([92.198.50.35]:51963 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756931Ab0FOJBK (ORCPT ); Tue, 15 Jun 2010 05:01:10 -0400 Received: from octopus.hi.pengutronix.de ([2001:6f8:1178:2:215:17ff:fe12:23b0] helo=localhost) by metis.ext.pengutronix.de with esmtp (Exim 4.71) (envelope-from ) id 1OOS13-00059L-I4; Tue, 15 Jun 2010 11:01:05 +0200 From: Luotao Fu To: Samuel Ortiz , Dmitry Torokhov , Andrew Morton , Mark Brown Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, Luotao Fu Subject: [PATCH 3/3 V3] input: STMPE811 touch controller support Date: Tue, 15 Jun 2010 11:00:46 +0200 Message-Id: <1276592446-26909-4-git-send-email-l.fu@pengutronix.de> X-Mailer: git-send-email 1.7.1 In-Reply-To: <1276511558-27121-1-git-send-email-l.fu@pengutronix.de> References: <1276511558-27121-1-git-send-email-l.fu@pengutronix.de> X-SA-Exim-Connect-IP: 2001:6f8:1178:2:215:17ff:fe12:23b0 X-SA-Exim-Mail-From: l.fu@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-input@vger.kernel.org Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.3 (demeter.kernel.org [140.211.167.41]); Tue, 15 Jun 2010 09:01:43 +0000 (UTC) diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 3b9d5e2..059b82b 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -603,4 +603,14 @@ config TOUCHSCREEN_TPS6507X To compile this driver as a module, choose M here: the module will be called tps6507x_ts. +config TOUCHSCREEN_STMPE811 + tristate "STMicroelectronics STMPE811 touchscreen" + depends on MFD_STMPE811 + help + Say Y here if you want support for STMicroelectronics + STMPE811 based touchscreen controller. + + To compile this driver as a module, choose M here: the + module will be called stmpe811_ts. + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 497964a..9da8948 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -47,3 +47,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o +obj-$(CONFIG_TOUCHSCREEN_STMPE811) += stmpe811_ts.o diff --git a/drivers/input/touchscreen/stmpe811_ts.c b/drivers/input/touchscreen/stmpe811_ts.c new file mode 100644 index 0000000..ee6a547 --- /dev/null +++ b/drivers/input/touchscreen/stmpe811_ts.c @@ -0,0 +1,361 @@ +/* STMicroelectronics STMPE811 Touchscreen Driver + * + * (C) 2010 Luotao Fu + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define STMPE811_TSC_CTRL_OP_MOD_XYZ (0<<1) +#define STMPE811_TSC_CTRL_OP_MOD_XY (1<<1) +#define STMPE811_TSC_CTRL_OP_MOD_X (2<<1) +#define STMPE811_TSC_CTRL_OP_MOD_Y (3<<1) +#define STMPE811_TSC_CTRL_OP_MOD_Z (4<<1) + +#define STMPE811_TSC_CTRL_TSC_STA (1<<7) +#define STMPE811_TSC_CTRL_TSC_EN (1<<0) + +#define SAMPLE_TIME(x) ((x & 0xf) << 4) +#define MOD_12B(x) ((x & 0x1) << 3) +#define REF_SEL(x) ((x & 0x1) << 1) +#define ADC_FREQ(x) (x & 0x3) +#define AVE_CTRL(x) ((x & 0x3) << 6) +#define DET_DELAY(x) ((x & 0x7) << 3) +#define SETTLING(x) ((x & 0x7)) +#define FRACTION_Z(x) ((x & 0x7)) + +#define STMPE811_TS_NAME "stmpe811-ts" +#define XY_MASK 0xfff + +struct stmpe811_touch { + struct stmpe811 *stm; + struct input_dev *idev; + struct delayed_work work; + u8 sample_time; + u8 mod_12b; + u8 ref_sel; + u8 adc_freq; + u8 ave_ctrl; + u8 touch_det_delay; + u8 settling; + u8 fraction_z; +}; + +static void stmpe811_work(struct work_struct *work) +{ + u8 int_sta; + u32 timeout = 40; + + struct stmpe811_touch *ts = + container_of(work, struct stmpe811_touch, work.work); + + stmpe811_reg_read(ts->stm, STMPE811_REG_INT_STA, &int_sta); + + /* touch_det sometimes get desasserted or just get stuck. This appears + * to be a silicon bug, We still have to clearify this with the + * manufacture. As a workaround We release the key anyway if the + * touch_det keeps coming in after 4ms, while the FIFO contains no value + * during the whole time. */ + while ((int_sta & (1 << STMPE811_IRQ_TOUCH_DET)) && (timeout > 0)) { + timeout--; + stmpe811_reg_read(ts->stm, STMPE811_REG_INT_STA, &int_sta); + udelay(100); + } + + /* reset the FIFO before we report release event */ + stmpe811_reg_set_bits(ts->stm, STMPE811_REG_FIFO_STA, + STMPE811_FIFO_STA_RESET); + stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_FIFO_STA, + STMPE811_FIFO_STA_RESET); + + input_report_abs(ts->idev, ABS_PRESSURE, 0); + input_sync(ts->idev); +} + +static irqreturn_t stmpe811_ts_handler(int irq, void *data) +{ + u8 data_set[4]; + int x, y, z; + struct stmpe811_touch *ts = data; + + /* Cancel polling for release if we have new value available. Wait for + * canceling till io operation in the work is finished. */ + mutex_lock(&ts->stm->io_lock); + cancel_delayed_work(&ts->work); + mutex_unlock(&ts->stm->io_lock); + + /* + * The FIFO sometimes just crashes and stops generating interrupts. This + * appears to be a silicon bug. We still have to clearify this with + * the manufacture. As a workaround we disable the TSC while we are + * collecting data and flush the FIFO after reading + */ + stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_TSC_CTRL, + STMPE811_TSC_CTRL_TSC_EN); + + stmpe811_block_read(ts->stm, STMPE811_REG_TSC_DATA_XYZ, 4, data_set); + + x = (data_set[0] << 4) | (data_set[1] >> 4); + y = ((data_set[1] & 0xf) << 8) | data_set[2]; + z = data_set[3]; + + input_report_abs(ts->idev, ABS_X, x); + input_report_abs(ts->idev, ABS_Y, y); + input_report_abs(ts->idev, ABS_PRESSURE, z); + input_sync(ts->idev); + + /* flush the FIFO after we have read out our values. */ + stmpe811_reg_set_bits(ts->stm, STMPE811_REG_FIFO_STA, + STMPE811_FIFO_STA_RESET); + stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_FIFO_STA, + STMPE811_FIFO_STA_RESET); + + /* reenable the tsc */ + stmpe811_reg_set_bits(ts->stm, STMPE811_REG_TSC_CTRL, + STMPE811_TSC_CTRL_TSC_EN); + + /* start polling for touch_det to detect release */ + schedule_delayed_work(&ts->work, HZ / 50); + + return IRQ_HANDLED; +} + +static int stmpe811_ts_open(struct input_dev *dev) +{ + struct stmpe811_touch *ts = input_get_drvdata(dev); + int ret = 0; + + ret = stmpe811_reg_set_bits(ts->stm, STMPE811_REG_FIFO_STA, + STMPE811_FIFO_STA_RESET); + if (ret) + goto out; + + ret = stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_FIFO_STA, + STMPE811_FIFO_STA_RESET); + if (ret) + goto out; + + ret = stmpe811_reg_set_bits(ts->stm, STMPE811_REG_TSC_CTRL, + STMPE811_TSC_CTRL_TSC_EN); + if (ret) + goto out; + +out: + return ret; +} + +static void stmpe811_ts_close(struct input_dev *dev) +{ + struct stmpe811_touch *ts = input_get_drvdata(dev); + + stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_TSC_CTRL, + STMPE811_TSC_CTRL_TSC_EN); +} + +static int __devinit stmpe811_input_probe(struct platform_device *pdev) +{ + struct stmpe811 *stm = dev_get_drvdata(pdev->dev.parent); + struct stmpe811_platform_data *pdata = stm->pdata; + struct stmpe811_touch *ts; + struct input_dev *idev; + struct stmpe811_ts_platform_data *ts_pdata = NULL; + + int ret = 0; + unsigned int ts_irq; + + ts = kzalloc(sizeof(*ts), GFP_KERNEL); + if (!ts) + goto err_out; + + idev = input_allocate_device(); + if (!idev) + goto err_free_ts; + + platform_set_drvdata(pdev, ts); + ts->stm = stm; + ts->idev = idev; + + if (pdata) + ts_pdata = pdata->ts_pdata; + + if (ts_pdata) { + ts->sample_time = ts_pdata->sample_time; + ts->mod_12b = ts_pdata->mod_12b; + ts->ref_sel = ts_pdata->ref_sel; + ts->adc_freq = ts_pdata->adc_freq; + ts->ave_ctrl = ts_pdata->ave_ctrl; + ts->touch_det_delay = ts_pdata->touch_det_delay; + ts->settling = ts_pdata->settling; + ts->fraction_z = ts_pdata->fraction_z; + } + + INIT_DELAYED_WORK(&ts->work, stmpe811_work); + + ts_irq = stm->irq_base + STMPE811_IRQ_FIFO_TH; + ret = request_threaded_irq(ts_irq, NULL, stmpe811_ts_handler, + IRQF_ONESHOT, STMPE811_TS_NAME, ts); + if (ret) { + dev_err(&pdev->dev, "Failed to request IRQ %d\n", ts_irq); + goto err_free_input; + } + + ret = stmpe811_reg_clear_bits(stm, STMPE811_REG_SYS_CTRL2, + (STMPE811_SYS_CTRL2_ADC_OFF | + STMPE811_SYS_CTRL2_TSC_OFF)); + if (ret) { + dev_err(&pdev->dev, "Could not enable clock for ADC and TS\n"); + goto err_free_irq; + } + + ret = stmpe811_reg_set_bits(stm, STMPE811_REG_ADC_CTRL1, + SAMPLE_TIME(ts->sample_time) | + MOD_12B(ts->mod_12b) | REF_SEL(ts->ref_sel)); + if (ret) { + dev_err(&pdev->dev, "Could not setup ADC\n"); + goto err_free_irq; + } + + ret = stmpe811_reg_set_bits(stm, STMPE811_REG_ADC_CTRL2, + ADC_FREQ(ts->adc_freq)); + if (ret) { + dev_err(&pdev->dev, "Could not setup ADC\n"); + goto err_free_irq; + } + + ret = stmpe811_reg_set_bits(stm, STMPE811_REG_TSC_CFG, + AVE_CTRL(ts->ave_ctrl) | + DET_DELAY(ts->touch_det_delay) | + SETTLING(ts->settling)); + if (ret) { + dev_err(&pdev->dev, "Could not config touch\n"); + goto err_free_irq; + } + + ret = stmpe811_reg_set_bits(stm, + STMPE811_REG_TSC_FRACTION_Z, + FRACTION_Z(ts->fraction_z)); + if (ret) { + dev_err(&pdev->dev, "Could not config touch\n"); + goto err_free_irq; + } + + /* set FIFO to 1 for single point reading */ + ret = stmpe811_reg_write(stm, STMPE811_REG_FIFO_TH, 1); + if (ret) { + dev_err(&pdev->dev, "Could not set FIFO\n"); + goto err_free_irq; + } + + ret = stmpe811_reg_set_bits(stm, STMPE811_REG_TSC_CTRL, + STMPE811_TSC_CTRL_OP_MOD_XYZ); + if (ret) { + dev_err(&pdev->dev, "Could not set mode\n"); + goto err_free_irq; + } + + idev->name = STMPE811_TS_NAME; + idev->id.bustype = BUS_I2C; + idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + idev->open = stmpe811_ts_open; + idev->close = stmpe811_ts_close; + + input_set_drvdata(idev, ts); + + ret = input_register_device(idev); + if (ret) { + dev_err(&pdev->dev, "Could not register input device\n"); + goto err_free_irq; + } + + stm->active_flag |= STMPE811_USE_TS; + + input_set_abs_params(idev, ABS_X, 0, XY_MASK, 0, 0); + input_set_abs_params(idev, ABS_Y, 0, XY_MASK, 0, 0); + input_set_abs_params(idev, ABS_PRESSURE, 0x0, 0xff, 0, 0); + + return ret; + +err_free_irq: + free_irq(ts_irq, ts); +err_free_input: + input_free_device(idev); + platform_set_drvdata(pdev, NULL); +err_free_ts: + kfree(ts); +err_out: + return ret; +} + +static int __devexit stmpe811_ts_remove(struct platform_device *pdev) +{ + struct stmpe811_touch *ts = platform_get_drvdata(pdev); + unsigned int ts_irq = ts->stm->irq_base + STMPE811_IRQ_FIFO_TH; + + cancel_delayed_work(&ts->work); + + stmpe811_reg_write(ts->stm, STMPE811_REG_FIFO_TH, 0); + + stmpe811_reg_set_bits(ts->stm, STMPE811_REG_SYS_CTRL2, + (STMPE811_SYS_CTRL2_ADC_OFF | + STMPE811_SYS_CTRL2_ADC_OFF)); + + free_irq(ts_irq, ts); + + ts->stm->active_flag &= ~STMPE811_USE_TS; + platform_set_drvdata(pdev, NULL); + + input_unregister_device(ts->idev); + input_free_device(ts->idev); + + kfree(ts); + + return 0; +} + +static struct platform_driver stmpe811_input_driver = { + .driver = { + .name = STMPE811_TS_NAME, + }, + .probe = stmpe811_input_probe, + .remove = __devexit_p(stmpe811_ts_remove), +}; + +static int __init stmpe811_input_init(void) +{ + return platform_driver_register(&stmpe811_input_driver); +} + +module_init(stmpe811_input_init); + +static void __exit stmpe811_input_exit(void) +{ + platform_driver_unregister(&stmpe811_input_driver); +} + +module_exit(stmpe811_input_exit); + +MODULE_AUTHOR("Luotao Fu "); +MODULE_DESCRIPTION("STMPE811 touchscreen driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" STMPE811_TS_NAME); diff --git a/include/linux/mfd/stmpe811.h b/include/linux/mfd/stmpe811.h index 736b4eb..68bcdac 100644 --- a/include/linux/mfd/stmpe811.h +++ b/include/linux/mfd/stmpe811.h @@ -94,6 +94,44 @@ struct stmpe811 { }; /** + * struct stmpe811_ts_platform_data - stmpe811 touch screen controller platform + * data + * @sample_time: ADC converstion time in number of clock. + * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, + * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), + * recommended is 4. + * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) + * @ref_sel: ADC reference source + * (0 -> internal reference, 1 -> external reference) + * @adc_freq: ADC Clock speed + * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) + * @ave_ctrl: Sample average control + * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) + * @touch_det_delay: Touch detect interrupt delay + * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us, + * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) + * recommended is 3 + * @settling: Panel driver settling time + * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms, + * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) + * recommended is 2 + * @fraction_z: Length of the fractional part in z + * (fraction_z ([0..7]) = Count of the fractional part) + * recommended is 7 + * + * */ +struct stmpe811_ts_platform_data { + u8 sample_time; + u8 mod_12b; + u8 ref_sel; + u8 adc_freq; + u8 ave_ctrl; + u8 touch_det_delay; + u8 settling; + u8 fraction_z; +}; + +/** * struct stmpe811_gpio_platform_data - stmpe811 gpio controller platform data * * @gpio_base: number of the chip's first GPIO @@ -116,6 +154,7 @@ struct stmpe811_gpio_platform_data { * @irq_base: board dependt irq number of the first irq for the irq chip * @gpio_pdata: pointer to gpio controller platform data * registered by the core. + * @ts_pdata: pointer to touch screen controller platform data * * */ struct stmpe811_platform_data { @@ -126,6 +165,7 @@ struct stmpe811_platform_data { unsigned int irq_rev_pol; int irq_base; struct stmpe811_gpio_platform_data *gpio_pdata; + struct stmpe811_ts_platform_data *ts_pdata; }; int stmpe811_block_read(struct stmpe811 *stm, u8 reg, uint len, u8 *val);