@@ -28,6 +28,17 @@ config HWMON_VID
tristate
default n
+config HWMON_DEBUG_CHIP
+ bool "Hardware Monitoring Chip debugging messages"
+ default n
+ help
+ Say Y here if you want the I2C chip drivers to produce a bunch of
+ debug messages to the system log. Select this if you are having
+ a problem with I2C support and want to see more of what is going
+ on.
+
+comment "Native drivers"
+
config SENSORS_ABITUGURU
tristate "Abit uGuru (rev 1 & 2)"
depends on X86 && EXPERIMENTAL
@@ -248,18 +259,6 @@ config SENSORS_ASB100
This driver can also be built as a module. If so, the module
will be called asb100.
-config SENSORS_ATK0110
- tristate "ASUS ATK0110 ACPI hwmon"
- depends on X86 && ACPI && EXPERIMENTAL
- help
- If you say yes here you get support for the ACPI hardware
- monitoring interface found in many ASUS motherboards. This
- driver will provide readings of fans, voltages and temperatures
- through the system firmware.
-
- This driver can also be built as a module. If so, the module
- will be called asus_atk0110.
-
config SENSORS_ATXP1
tristate "Attansic ATXP1 VID controller"
depends on I2C && EXPERIMENTAL
@@ -326,34 +325,6 @@ config SENSORS_F75375S
This driver can also be built as a module. If so, the module
will be called f75375s.
-config SENSORS_FSCHER
- tristate "FSC Hermes (DEPRECATED)"
- depends on X86 && I2C
- help
- This driver is DEPRECATED please use the new merged fschmd
- ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
- instead.
-
- If you say yes here you get support for Fujitsu Siemens
- Computers Hermes sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called fscher.
-
-config SENSORS_FSCPOS
- tristate "FSC Poseidon (DEPRECATED)"
- depends on X86 && I2C
- help
- This driver is DEPRECATED please use the new merged fschmd
- ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
- instead.
-
- If you say yes here you get support for Fujitsu Siemens
- Computers Poseidon sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called fscpos.
-
config SENSORS_FSCHMD
tristate "Fujitsu Siemens Computers sensor chips"
depends on X86 && I2C
@@ -402,12 +373,12 @@ config SENSORS_GL520SM
will be called gl520sm.
config SENSORS_CORETEMP
- tristate "Intel Core (2) Duo/Solo temperature sensor"
- depends on X86 && EXPERIMENTAL
+ tristate "Intel Core/Core2/Atom temperature sensor"
+ depends on X86 && PCI && EXPERIMENTAL
help
If you say yes here you get support for the temperature
- sensor inside your CPU. Supported all are all known variants
- of Intel Core family.
+ sensor inside your CPU. Most of the family 6 CPUs
+ are supported. Check documentation/driver for details.
config SENSORS_IBMAEM
tristate "IBM Active Energy Manager temperature/power sensors and control"
@@ -702,6 +673,23 @@ config SENSORS_SHT15
This driver can also be built as a module. If so, the module
will be called sht15.
+config SENSORS_S3C
+ tristate "S3C24XX/S3C64XX Inbuilt ADC"
+ depends on ARCH_S3C2410
+ help
+ If you say yes here you get support for the on-board ADCs of
+ the Samsung S3C24XX or S3C64XX series of SoC
+
+ This driver can also be built as a module. If so, the module
+ will be called s3c-hwmo.
+
+config SENSORS_S3C_RAW
+ bool "Include raw channel attributes in sysfs"
+ depends on SENSORS_S3C
+ help
+ Say Y here if you want to include raw copies of all the ADC
+ channels in sysfs.
+
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on PCI
@@ -797,6 +785,16 @@ config SENSORS_TMP401
This driver can also be built as a module. If so, the module
will be called tmp401.
+config SENSORS_TMP421
+ tristate "Texas Instruments TMP421 and compatible"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Texas Instruments TMP421,
+ TMP422 and TMP423 temperature sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called tmp421.
+
config SENSORS_VIA686A
tristate "VIA686A"
depends on PCI
@@ -920,6 +918,27 @@ config SENSORS_W83627EHF
This driver can also be built as a module. If so, the module
will be called w83627ehf.
+config SENSORS_WM831X
+ tristate "WM831x PMICs"
+ depends on MFD_WM831X
+ help
+ If you say yes here you get support for the hardware
+ monitoring functionality of the Wolfson Microelectronics
+ WM831x series of PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called wm831x-hwmon.
+
+config SENSORS_WM8350
+ tristate "Wolfson Microelectronics WM835x"
+ depends on MFD_WM8350
+ help
+ If you say yes here you get support for the hardware
+ monitoring features of the WM835x series of PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called wm8350-hwmon.
+
config SENSORS_ULTRA45
tristate "Sun Ultra45 PIC16F747"
depends on SPARC64
@@ -947,34 +966,6 @@ config SENSORS_HDAPS
Say Y here if you have an applicable laptop and want to experience
the awesome power of hdaps.
-config SENSORS_LIS3LV02D
- tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
- depends on ACPI && INPUT
- select INPUT_POLLDEV
- select NEW_LEDS
- select LEDS_CLASS
- default n
- help
- This driver provides support for the LIS3LV02Dx accelerometer. In
- particular, it can be found in a number of HP laptops, which have the
- "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
- systems the driver should load automatically (via ACPI). The
- accelerometer might also be found in other systems, connected via SPI
- or I2C. The accelerometer data is readable via
- /sys/devices/platform/lis3lv02d.
-
- This driver also provides an absolute input class device, allowing
- the laptop to act as a pinball machine-esque joystick. On HP laptops,
- if the led infrastructure is activated, support for a led indicating
- disk protection will be provided as hp:red:hddprotection.
-
- This driver can also be built as modules. If so, the core module
- will be called lis3lv02d and a specific module for HP laptops will be
- called hp_accel.
-
- Say Y here if you have an applicable laptop and want to experience
- the awesome power of lis3lv02d.
-
config SENSORS_LIS3_SPI
tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
depends on !ACPI && SPI_MASTER && INPUT
@@ -1017,21 +1008,51 @@ config SENSORS_APPLESMC
Say Y here if you have an applicable laptop and want to experience
the awesome power of applesmc.
-config SENSORS_HMC5843
- tristate "HMC5843 Compass Sensor Driver"
- depends on I2C && ARCH_MSM_SCORPION
- default n
- help
- HMC5843 Compass Sensor Driver implemented by Quanta.
+if ACPI
-config HWMON_DEBUG_CHIP
- bool "Hardware Monitoring Chip debugging messages"
+comment "ACPI drivers"
+
+config SENSORS_ATK0110
+ tristate "ASUS ATK0110"
+ depends on X86 && EXPERIMENTAL
+ help
+ If you say yes here you get support for the ACPI hardware
+ monitoring interface found in many ASUS motherboards. This
+ driver will provide readings of fans, voltages and temperatures
+ through the system firmware.
+
+ This driver can also be built as a module. If so, the module
+ will be called asus_atk0110.
+
+config SENSORS_LIS3LV02D
+ tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
+ depends on INPUT
+ select INPUT_POLLDEV
+ select NEW_LEDS
+ select LEDS_CLASS
default n
help
- Say Y here if you want the I2C chip drivers to produce a bunch of
- debug messages to the system log. Select this if you are having
- a problem with I2C support and want to see more of what is going
- on.
+ This driver provides support for the LIS3LV02Dx accelerometer. In
+ particular, it can be found in a number of HP laptops, which have the
+ "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
+ systems the driver should load automatically (via ACPI). The
+ accelerometer might also be found in other systems, connected via SPI
+ or I2C. The accelerometer data is readable via
+ /sys/devices/platform/lis3lv02d.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick. On HP laptops,
+ if the led infrastructure is activated, support for a led indicating
+ disk protection will be provided as hp:red:hddprotection.
+
+ This driver can also be built as modules. If so, the core module
+ will be called lis3lv02d and a specific module for HP laptops will be
+ called hp_accel.
+
+ Say Y here if you have an applicable laptop and want to experience
+ the awesome power of lis3lv02d.
+
+endif # ACPI
config SENSORS_ISL29011
tristate "ISL29011 Light Sensor Driver"
@@ -1048,12 +1069,27 @@ config SENSORS_WPCE775X
This driver provides support for the Winbond WPCE775XX Embedded
Controller, which provides lcd backlight, LEDs, and Battery control.
+config SENSORS_HMC5843
+ tristate "HMC5843 Compass Sensor Driver"
+ depends on I2C && ARCH_MSM_SCORPION
+ default n
+ help
+ HMC5843 Compass Sensor Driver implemented by Quanta.
+
+config SENSORS_BOSCH_BMA150
+ tristate "SMB380/BMA150 acceleration sensor support"
+ depends on I2C
+ default n
+ help
+ If you say yes here you get support for Bosch Sensortec's
+ acceleration sensors SMB380/BMA150.
+
config SENSORS_NPCE781X
- tristate "NuvoTon WPCE775X"
- depends on I2C
- default n
+ tristate "NuvoTon WPCE775X"
+ depends on I2C
+ default n
help
- This driver provides support for the NuvoTon NPCE781X Embedded
- Controller, which provides lcd backlight, LEDs, and Battery control.
+ This driver provides support for the NuvoTon NPCE781X Embedded
+ Controller, which provides lcd backlight, LEDs, and Battery control.
endif # HWMON
@@ -5,6 +5,10 @@
obj-$(CONFIG_HWMON) += hwmon.o
obj-$(CONFIG_HWMON_VID) += hwmon-vid.o
+# APCI drivers
+obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o
+
+# Native drivers
# asb100, then w83781d go first, as they can override other drivers' addresses.
obj-$(CONFIG_SENSORS_ASB100) += asb100.o
obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o
@@ -29,10 +33,8 @@ obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o
obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o
obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
-
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
obj-$(CONFIG_SENSORS_AMS) += ams/
-obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
@@ -40,9 +42,7 @@ obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
-obj-$(CONFIG_SENSORS_FSCHER) += fscher.o
obj-$(CONFIG_SENSORS_FSCHMD) += fschmd.o
-obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o
obj-$(CONFIG_SENSORS_G760A) += g760a.o
obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
@@ -76,6 +76,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
obj-$(CONFIG_SENSORS_SHT15) += sht15.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
@@ -83,17 +84,23 @@ obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
obj-$(CONFIG_SENSORS_TMP401) += tmp401.o
+obj-$(CONFIG_SENSORS_TMP421) += tmp421.o
obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
obj-$(CONFIG_SENSORS_VT1211) += vt1211.o
obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
+obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
+obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
obj-$(CONFIG_SENSORS_ISL29011) += isl29011.o
-obj-$(CONFIG_SENSORS_HMC5843) += hmc5843.o
obj-$(CONFIG_SENSORS_WPCE775X) += wpce775x.o
obj-$(CONFIG_SENSORS_NPCE781X) += npce781x.o
+obj-$(CONFIG_SENSORS_BOSCH_BMA150) += bma150.o
+obj-$(CONFIG_SENSORS_HMC5843) += hmc5843.o
ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
endif
+
+bma150-objs := bma150_driver.o smb380.o smb380calib.o