@@ -321,4 +321,13 @@ config MOUSE_SYNAPTICS_I2C
To compile this driver as a module, choose M here: the
module will be called synaptics_i2c.
+config MOUSE_QCITP
+ tristate "Quanta Computer Inc. Touchpad"
+ depends on I2C && ARCH_MSM_SCORPION
+ default n
+ help
+ Say Y here if you want to use the Quanta touchpad driver for ST 1.5
+ platform.
+
+
endif
@@ -19,6 +19,7 @@ obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o
obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
obj-$(CONFIG_MOUSE_SYNAPTICS_I2C) += synaptics_i2c.o
obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o
+obj-$(CONFIG_MOUSE_QCITP) += qci_touchpad.o
psmouse-objs := psmouse-base.o synaptics.o
new file mode 100644
@@ -0,0 +1,308 @@
+/* Quanta I2C Touchpad Driver
+ *
+ * Copyright (C) 2009 Quanta Computer Inc.
+ * Author: Hsin Wu <hsin.wu@quantatw.com>
+ * Author: Austin Lai <austin.lai@quantatw.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+ /*
+ *
+ * The Driver with I/O communications via the I2C Interface for ON2 of AP BU.
+ * And it is only working on the nuvoTon WPCE775x Embedded Controller.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/keyboard.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#define TOUCHPAD_ID_NAME "qci-i2cpad"
+#define TOUCHPAD_NAME "PS2 Touchpad"
+#define TOUCHPAD_DEVICE "/i2c/input1"
+#define TOUCHPAD_CMD_ENABLE 0xF4
+
+static int __devinit qcitp_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int __devexit qcitp_remove(struct i2c_client *kbd);
+
+/* General structure to hold the driver data */
+struct i2ctpad_drv_data {
+ struct i2c_client *ti2c_client;
+ struct work_struct work;
+ struct input_dev *qcitp_dev;
+ struct kobject *tp_kobj;
+ unsigned int qcitp_gpio;
+ unsigned int qcitp_irq;
+ char ecdata[8];
+};
+
+static int tp_sense_val = 10;
+static ssize_t tp_sensitive_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char * buf)
+{
+ return sprintf(buf, "%d\n", tp_sense_val);
+}
+
+static ssize_t tp_sensitive_store(struct kobject *kobj,
+ struct kobj_attribute *attr, const char* buf, size_t n)
+{
+ unsigned int val = 0;
+ sscanf(buf, "%d", &val);
+
+ if (val >= 1 && val <= 10)
+ tp_sense_val = val;
+ else
+ return -ENOSYS;
+
+ return sizeof(buf);
+}
+
+static struct kobj_attribute tp_sensitivity = __ATTR(tp_sensitivity ,
+ 0644 ,
+ tp_sensitive_show ,
+ tp_sensitive_store);
+
+static struct attribute *g_tp[] = {
+ &tp_sensitivity.attr,
+ NULL,
+};
+
+static struct attribute_group attr_group = {
+ .attrs = g_tp,
+};
+
+/*-----------------------------------------------------------------------------
+ * Driver functions
+ *---------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+static int qcitp_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int qcitp_resume(struct device *dev)
+{
+ return 0;
+}
+#endif
+
+static const struct i2c_device_id qcitp_idtable[] = {
+ { TOUCHPAD_ID_NAME, 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, qcitp_idtable);
+#ifdef CONFIG_PM
+static struct dev_pm_ops qcitp_pm_ops = {
+ .suspend = qcitp_suspend,
+ .resume = qcitp_resume,
+};
+#endif
+static struct i2c_driver i2ctp_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = TOUCHPAD_ID_NAME,
+#ifdef CONFIG_PM
+ .pm = &qcitp_pm_ops,
+#endif
+ },
+ .probe = qcitp_probe,
+ .remove = __devexit_p(qcitp_remove),
+ .id_table = qcitp_idtable,
+};
+
+static void qcitp_fetch_data(struct i2c_client *tpad_client,
+ char *ec_data)
+{
+ struct i2c_msg tp_msg;
+ int ret;
+ tp_msg.addr = tpad_client->addr;
+ tp_msg.flags = I2C_M_RD;
+ tp_msg.len = 3;
+ tp_msg.buf = (char *)&ec_data[0];
+ ret = i2c_transfer(tpad_client->adapter, &tp_msg, 1);
+}
+
+static void qcitp_report_key(struct input_dev *tpad_dev, char *ec_data)
+{
+ int dx = 0;
+ int dy = 0;
+
+ if (ec_data[1])
+ dx = (int) ec_data[1] -
+ (int) ((ec_data[0] << 4) & 0x100);
+
+ if (ec_data[2])
+ dy = (int) ((ec_data[0] << 3) & 0x100) -
+ (int) ec_data[2];
+
+ dx = (dx * tp_sense_val)/10;
+ dy = (dy * tp_sense_val)/10;
+
+ input_report_key(tpad_dev, BTN_LEFT, ec_data[0] & 0x01);
+ input_report_key(tpad_dev, BTN_RIGHT, ec_data[0] & 0x02);
+ input_report_key(tpad_dev, BTN_MIDDLE, ec_data[0] & 0x04);
+ input_report_rel(tpad_dev, REL_X, dx);
+ input_report_rel(tpad_dev, REL_Y, dy);
+ input_sync(tpad_dev);
+}
+
+static void qcitp_work_handler(struct work_struct *_work)
+{
+ struct i2ctpad_drv_data *itpad_drv_data =
+ container_of(_work, struct i2ctpad_drv_data, work);
+
+ struct i2c_client *itpad_client = itpad_drv_data->ti2c_client;
+ struct input_dev *itpad_dev = itpad_drv_data->qcitp_dev;
+
+ qcitp_fetch_data(itpad_client, itpad_drv_data->ecdata);
+ qcitp_report_key(itpad_dev, itpad_drv_data->ecdata);
+}
+
+static irqreturn_t qcitp_interrupt(int irq, void *dev_id)
+{
+ struct i2ctpad_drv_data *itpad_drv_data = dev_id;
+ schedule_work(&itpad_drv_data->work);
+ return IRQ_HANDLED;
+}
+
+static int __devinit qcitp_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int err = -ENOMEM;
+ struct i2ctpad_drv_data *context = 0;
+
+ context = kzalloc(sizeof(struct i2ctpad_drv_data), GFP_KERNEL);
+ if (!context)
+ return err;
+ i2c_set_clientdata(client, context);
+ context->ti2c_client = client;
+ context->qcitp_gpio = client->irq;
+
+ /* Enable mouse */
+ i2c_smbus_write_byte(client, TOUCHPAD_CMD_ENABLE);
+ mdelay(100);
+ i2c_smbus_read_byte(client);
+ /*allocate and register input device*/
+ context->qcitp_dev = input_allocate_device();
+ if (!context->qcitp_dev) {
+ pr_err("[TouchPad] allocting memory fail\n");
+ err = -ENOMEM;
+ goto allocate_fail;
+ }
+ context->qcitp_dev->name = TOUCHPAD_NAME;
+ context->qcitp_dev->phys = TOUCHPAD_DEVICE;
+ context->qcitp_dev->id.bustype = BUS_I2C;
+ context->qcitp_dev->id.vendor = 0x1050;
+ context->qcitp_dev->id.product = 0x1;
+ context->qcitp_dev->id.version = 0x1;
+ context->qcitp_dev->evbit[0] = BIT_MASK(EV_KEY) |
+ BIT_MASK(EV_REL);
+ context->qcitp_dev->relbit[0] = BIT_MASK(REL_X) |
+ BIT_MASK(REL_Y);
+ context->qcitp_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
+ BIT_MASK(BTN_MIDDLE) |
+ BIT_MASK(BTN_RIGHT);
+
+ input_set_drvdata(context->qcitp_dev, context);
+ err = input_register_device(context->qcitp_dev);
+ if (err) {
+ pr_err("[TouchPad] register device fail\n");
+ goto register_fail;
+ }
+
+ /*request intterrupt*/
+ INIT_WORK(&context->work, qcitp_work_handler);
+
+ err = gpio_request(context->qcitp_gpio, "qci-pad");
+ if (err) {
+ pr_err("[TouchPad]err gpio request\n");
+ goto gpio_request_fail;
+ }
+
+ context->qcitp_irq = gpio_to_irq(context->qcitp_gpio);
+ err = request_irq(context->qcitp_irq,
+ qcitp_interrupt,
+ IRQF_TRIGGER_FALLING,
+ TOUCHPAD_ID_NAME,
+ context);
+ if (err) {
+ pr_err("[TouchPad] unable to get IRQ\n");
+ goto request_irq_fail;
+ }
+ /*create touchpad kobject*/
+ context->tp_kobj = kobject_create_and_add("touchpad", NULL);
+
+ err = sysfs_create_group(context->tp_kobj, &attr_group);
+ if (err)
+ pr_warning("[TouchPad] sysfs create fail\n");
+
+ tp_sense_val = 10;
+
+ return 0;
+
+request_irq_fail:
+ gpio_free(context->qcitp_gpio);
+
+gpio_request_fail:
+ input_unregister_device(context->qcitp_dev);
+
+register_fail:
+ input_free_device(context->qcitp_dev);
+
+allocate_fail:
+ i2c_set_clientdata(client, NULL);
+ kfree(context);
+ return err;
+}
+
+static int __devexit qcitp_remove(struct i2c_client *dev)
+{
+ struct i2ctpad_drv_data *context = i2c_get_clientdata(dev);
+
+ free_irq(context->qcitp_irq, context);
+ gpio_free(context->qcitp_gpio);
+ input_free_device(context->qcitp_dev);
+ input_unregister_device(context->qcitp_dev);
+ kfree(context);
+
+ return 0;
+}
+
+static int __init qcitp_init(void)
+{
+ return i2c_add_driver(&i2ctp_driver);
+}
+
+
+static void __exit qcitp_exit(void)
+{
+ i2c_del_driver(&i2ctp_driver);
+}
+
+module_init(qcitp_init);
+module_exit(qcitp_exit);
+
+MODULE_AUTHOR("Quanta Computer Inc.");
+MODULE_DESCRIPTION("Quanta Embedded Controller I2C Touch Pad Driver");
+MODULE_LICENSE("GPL v2");