From patchwork Fri Oct 15 15:07:50 2010 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Maxim Levitsky X-Patchwork-Id: 258581 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id o9G6hhno022988 for ; Sat, 16 Oct 2010 06:43:43 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753001Ab0JPGnk (ORCPT ); Sat, 16 Oct 2010 02:43:40 -0400 Received: from mail-bw0-f46.google.com ([209.85.214.46]:37493 "EHLO mail-bw0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752809Ab0JPGnj (ORCPT ); Sat, 16 Oct 2010 02:43:39 -0400 Received: by bwz15 with SMTP id 15so1513222bwz.19 for ; Fri, 15 Oct 2010 23:43:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:cc:subject:date :message-id:x-mailer:in-reply-to:references; bh=myCfQRxVHptrw4f4ySs8xzLdvcMPjBbqgOxPkNka4NA=; b=q7DE/61NkBUpanBtTDys/8tGKhiAL+Y62LU2ONCtR2/nbYd/s4tY+kggfGex6se7MD 3ssfUx1K4i26/VqVJMjna3uvmHRqnYpcdYsvGHFbNkJI1tpmbKZ5A9pg6YKpGrgncLH5 tveNEN6JsQ6Jzb9ftvFKET9yPyQLQjr8DJqnQ= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:cc:subject:date:message-id:x-mailer:in-reply-to:references; b=XNvksD76pgxkagCffVNtBlbmtNN9yOoWfnLCPR+QKYvBYaFMhAgKASZp3B+JL1s0k2 GVzCnmpPB+QwbLXON2vHEBDzq4aRfou38YVJopTwNGeBMl23x5XRtY3aTa2mHOtRAaEV Rj5ZcSeg5g/HPlou1HvGIlRipeNk7FVlOLD80= Received: by 10.204.79.73 with SMTP id o9mr836683bkk.118.1287155298074; Fri, 15 Oct 2010 08:08:18 -0700 (PDT) Received: from maxim-laptop ([77.125.7.102]) by mx.google.com with ESMTPS id t10sm6907156bkj.16.2010.10.15.08.08.10 (version=SSLv3 cipher=RC4-MD5); Fri, 15 Oct 2010 08:08:14 -0700 (PDT) From: Maxim Levitsky To: lirc-list@lists.sourceforge.net Cc: Jarod Wilson , =?UTF-8?q?David=20H=C3=A4rdeman?= , mchehab@infradead.org, linux-input@vger.kernel.org, linux-media@vger.kernel.org, Maxim Levitsky Subject: [PATCH 4/7] IR: ene_ir: updates Date: Fri, 15 Oct 2010 17:07:50 +0200 Message-Id: <1287155273-16171-5-git-send-email-maximlevitsky@gmail.com> X-Mailer: git-send-email 1.7.1 In-Reply-To: <1287155273-16171-1-git-send-email-maximlevitsky@gmail.com> References: <1287155273-16171-1-git-send-email-maximlevitsky@gmail.com> Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.3 (demeter1.kernel.org [140.211.167.41]); Sat, 16 Oct 2010 06:43:43 +0000 (UTC) diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig index 490c57c..e9bfdca 100644 --- a/drivers/media/IR/Kconfig +++ b/drivers/media/IR/Kconfig @@ -114,15 +114,15 @@ config IR_MCEUSB module will be called mceusb. config IR_ENE - tristate "ENE eHome Receiver/Transciever (pnp id: ENE0100/ENE02xxx)" + tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" depends on PNP depends on IR_CORE ---help--- Say Y here to enable support for integrated infrared receiver - /transciever made by ENE. + /transceiver made by ENE. You can see if you have it by looking at lspnp output. - Output should include ENE0100 ENE0200 or something similiar. + Output should include ENE0100 ENE0200 or something similar. To compile this driver as a module, choose M here: the module will be called ene_ir. diff --git a/drivers/media/IR/ene_ir.c b/drivers/media/IR/ene_ir.c index 5447750..9f9afe7 100644 --- a/drivers/media/IR/ene_ir.c +++ b/drivers/media/IR/ene_ir.c @@ -1,5 +1,5 @@ /* - * driver for ENE KB3926 B/C/D CIR (pnp id: ENE0XXX) + * driver for ENE KB3926 B/C/D/E/F CIR (pnp id: ENE0XXX) * * Copyright (C) 2010 Maxim Levitsky * @@ -17,6 +17,17 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * USA + * + * Special thanks to: + * Sami R. for lot of help in debugging and therefore + * bringing to life support for transmission & learning mode. + * + * Charlie Andrews for lots of help in + * bringing up the support of new firmware buffer that is popular + * on latest notebooks + * + * ENE for partial device documentation + * */ #include @@ -31,51 +42,59 @@ #include #include "ene_ir.h" - -static int sample_period = -1; -static int enable_idle = 1; -static int input = 1; +static int sample_period; +static bool learning_mode; static int debug; -static int txsim; +static bool txsim; -static int ene_irq_status(struct ene_device *dev); +static void ene_set_reg_addr(struct ene_device *dev, u16 reg) +{ + outb(reg >> 8, dev->hw_io + ENE_ADDR_HI); + outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO); +} /* read a hardware register */ -static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg) +static u8 ene_read_reg(struct ene_device *dev, u16 reg) { u8 retval; - outb(reg >> 8, dev->hw_io + ENE_ADDR_HI); - outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO); + ene_set_reg_addr(dev, reg); retval = inb(dev->hw_io + ENE_IO); - - ene_dbg_verbose("reg %04x == %02x", reg, retval); + dbg_regs("reg %04x == %02x", reg, retval); return retval; } /* write a hardware register */ -static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value) +static void ene_write_reg(struct ene_device *dev, u16 reg, u8 value) { - outb(reg >> 8, dev->hw_io + ENE_ADDR_HI); - outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO); + dbg_regs("reg %04x <- %02x", reg, value); + ene_set_reg_addr(dev, reg); outb(value, dev->hw_io + ENE_IO); - - ene_dbg_verbose("reg %04x <- %02x", reg, value); } -/* change specific bits in hardware register */ -static void ene_hw_write_reg_mask(struct ene_device *dev, - u16 reg, u8 value, u8 mask) +/* Set bits in hardware register */ +static void ene_set_reg_mask(struct ene_device *dev, u16 reg, u8 mask) { - u8 regvalue; - - outb(reg >> 8, dev->hw_io + ENE_ADDR_HI); - outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO); + dbg_regs("reg %04x |= %02x", reg, mask); + ene_set_reg_addr(dev, reg); + outb(inb(dev->hw_io + ENE_IO) | mask, dev->hw_io + ENE_IO); +} - regvalue = inb(dev->hw_io + ENE_IO) & ~mask; - regvalue |= (value & mask); - outb(regvalue, dev->hw_io + ENE_IO); +/* Clear bits in hardware register */ +static void ene_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask) +{ + dbg_regs("reg %04x &= ~%02x ", reg, mask); + ene_set_reg_addr(dev, reg); + outb(inb(dev->hw_io + ENE_IO) & ~mask, dev->hw_io + ENE_IO); +} - ene_dbg_verbose("reg %04x <- %02x (mask=%02x)", reg, value, mask); +/* A helper to set/clear a bit in register according to boolean variable */ +static void ene_set_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask, + bool set) +{ + if (set) + ene_set_reg_mask(dev, reg, mask); + else + ene_clear_reg_mask(dev, reg, mask); } /* detect hardware features */ @@ -83,339 +102,365 @@ static int ene_hw_detect(struct ene_device *dev) { u8 chip_major, chip_minor; u8 hw_revision, old_ver; - u8 tmp; - u8 fw_capabilities; - int pll_freq; - - tmp = ene_hw_read_reg(dev, ENE_HW_UNK); - ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR); + u8 fw_reg2, fw_reg1; - chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR); - chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR); + ene_clear_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD); + chip_major = ene_read_reg(dev, ENE_ECVER_MAJOR); + chip_minor = ene_read_reg(dev, ENE_ECVER_MINOR); + ene_set_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD); - ene_hw_write_reg(dev, ENE_HW_UNK, tmp); - hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION); - old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD); + hw_revision = ene_read_reg(dev, ENE_ECHV); + old_ver = ene_read_reg(dev, ENE_HW_VER_OLD); - pll_freq = (ene_hw_read_reg(dev, ENE_PLLFRH) << 4) + - (ene_hw_read_reg(dev, ENE_PLLFRL) >> 4); - - if (pll_freq != 1000) - dev->rx_period_adjust = 4; - else - dev->rx_period_adjust = 2; + dev->pll_freq = (ene_read_reg(dev, ENE_PLLFRH) << 4) + + (ene_read_reg(dev, ENE_PLLFRL) >> 4); - - ene_printk(KERN_NOTICE, "PLL freq = %d\n", pll_freq); + if (sample_period != ENE_DEFAULT_SAMPLE_PERIOD) + dev->rx_period_adjust = + dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 2 : 4; if (hw_revision == 0xFF) { - - ene_printk(KERN_WARNING, "device seems to be disabled\n"); - ene_printk(KERN_WARNING, - "send a mail to lirc-list@lists.sourceforge.net\n"); - ene_printk(KERN_WARNING, "please attach output of acpidump\n"); + ene_warn("device seems to be disabled"); + ene_warn("send a mail to lirc-list@lists.sourceforge.net"); + ene_warn("please attach output of acpidump and dmidecode"); return -ENODEV; } + ene_notice("chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x", + chip_major, chip_minor, old_ver, hw_revision); + + ene_notice("PLL freq = %d", dev->pll_freq); + if (chip_major == 0x33) { - ene_printk(KERN_WARNING, "chips 0x33xx aren't supported\n"); + ene_warn("chips 0x33xx aren't supported"); return -ENODEV; } if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) { dev->hw_revision = ENE_HW_C; + ene_notice("KB3926C detected"); } else if (old_ver == 0x24 && hw_revision == 0xC0) { dev->hw_revision = ENE_HW_B; - ene_printk(KERN_NOTICE, "KB3926B detected\n"); + ene_notice("KB3926B detected"); } else { dev->hw_revision = ENE_HW_D; - ene_printk(KERN_WARNING, - "unknown ENE chip detected, assuming KB3926D\n"); - ene_printk(KERN_WARNING, - "driver support might be not complete"); - + ene_notice("KB3926D or higher detected"); } - ene_printk(KERN_DEBUG, - "chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x\n", - chip_major, chip_minor, old_ver, hw_revision); - /* detect features hardware supports */ if (dev->hw_revision < ENE_HW_C) return 0; - fw_capabilities = ene_hw_read_reg(dev, ENE_FW2); - ene_dbg("Firmware capabilities: %02x", fw_capabilities); + fw_reg1 = ene_read_reg(dev, ENE_FW1); + fw_reg2 = ene_read_reg(dev, ENE_FW2); - dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN; - dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING; + ene_notice("Firmware regs: %02x %02x", fw_reg1, fw_reg2); - dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable && - (fw_capabilities & ENE_FW2_FAN_AS_NRML_IN); + dev->hw_use_gpio_0a = !!(fw_reg2 & ENE_FW2_GP0A); + dev->hw_learning_and_tx_capable = !!(fw_reg2 & ENE_FW2_LEARNING); + dev->hw_extra_buffer = !!(fw_reg1 & ENE_FW1_HAS_EXTRA_BUF); - ene_printk(KERN_NOTICE, "hardware features:\n"); - ene_printk(KERN_NOTICE, - "learning and transmit %s, gpio40_learn %s, fan_in %s\n", - dev->hw_learning_and_tx_capable ? "on" : "off", - dev->hw_gpio40_learning ? "on" : "off", - dev->hw_fan_as_normal_input ? "on" : "off"); + if (dev->hw_learning_and_tx_capable) + dev->hw_fan_input = !!(fw_reg2 & ENE_FW2_FAN_INPUT); + + ene_notice("Hardware features:"); if (dev->hw_learning_and_tx_capable) { - ene_printk(KERN_WARNING, - "Device supports transmitting, but that support is\n"); - ene_printk(KERN_WARNING, - "lightly tested. Please test it and mail\n"); - ene_printk(KERN_WARNING, - "lirc-list@lists.sourceforge.net\n"); + ene_notice("* Supports transmitting & learning mode"); + ene_notice(" This feature is rare and therefore,"); + ene_notice(" you are welcome to test it,"); + ene_notice(" and/or contact the author via:"); + ene_notice(" lirc-list@lists.sourceforge.net"); + ene_notice(" or maximlevitsky@gmail.com"); + + ene_notice("* Uses GPIO %s for IR raw input", + dev->hw_use_gpio_0a ? "40" : "0A"); + + if (dev->hw_fan_input) + ene_notice("* Uses unused fan feedback input as source" + " of demodulated IR data"); } - return 0; -} -/* this enables/disables IR input via gpio40*/ -static void ene_enable_gpio40_receive(struct ene_device *dev, int enable) -{ - ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, enable ? - 0 : ENE_CIR_CONF2_GPIO40DIS, - ENE_CIR_CONF2_GPIO40DIS); -} + if (!dev->hw_fan_input) + ene_notice("* Uses GPIO %s for IR demodulated input", + dev->hw_use_gpio_0a ? "0A" : "40"); -/* this enables/disables IR via standard input */ -static void ene_enable_normal_receive(struct ene_device *dev, int enable) -{ - ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_RX_ON : 0); -} - -/* this enables/disables IR input via unused fan tachtometer input */ -static void ene_enable_fan_receive(struct ene_device *dev, int enable) -{ - if (!enable) - ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0); - else { - ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN); - ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN); - } - dev->rx_fan_input_inuse = enable; + if (dev->hw_extra_buffer) + ene_notice("* Uses new style input buffer"); + return 0; } - /* Sense current received carrier */ -static int ene_rx_sense_carrier(struct ene_device *dev) +void ene_rx_sense_carrier(struct ene_device *dev) { - int period = ene_hw_read_reg(dev, ENE_RX_CARRIER); - int carrier; - ene_dbg("RX: hardware carrier period = %02x", period); + int period = ene_read_reg(dev, ENE_CIRCAR_PRD); + int hperiod = ene_read_reg(dev, ENE_CIRCAR_HPRD); + int carrier, duty_cycle; - if (!(period & ENE_RX_CARRIER_VALID)) - return 0; - period &= ~ENE_RX_CARRIER_VALID; + if (!(period & ENE_CIRCAR_PRD_VALID)) + return; + + period &= ~ENE_CIRCAR_PRD_VALID; if (!period) - return 0; + return; + + dbg("RX: hardware carrier period = %02x", period); + dbg("RX: hardware carrier pulse period = %02x", hperiod); + carrier = 2000000 / period; - ene_dbg("RX: sensed carrier = %d Hz", carrier); - return carrier; + duty_cycle = (hperiod * 100) / period; + dbg("RX: sensed carrier = %d Hz, duty cycle %d%%", + carrier, duty_cycle); + + /* TODO: Send carrier & duty cycle to IR layer */ } -/* determine which input to use*/ -static void ene_rx_set_inputs(struct ene_device *dev) +/* this enables/disables the CIR RX engine */ +static void ene_enable_cir_engine(struct ene_device *dev, bool enable) { - int learning_mode = dev->learning_enabled; - - ene_dbg("RX: setup receiver, learning mode = %d", learning_mode); + ene_set_clear_reg_mask(dev, ENE_CIRCFG, + ENE_CIRCFG_RX_EN | ENE_CIRCFG_RX_IRQ, enable); +} - ene_enable_normal_receive(dev, 1); +/* this selects input for CIR engine. Ether GPIO 0A or GPIO40*/ +static void ene_select_rx_input(struct ene_device *dev, bool gpio_0a) +{ + ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_GPIO0A, gpio_0a); +} - /* old hardware doesn't support learning mode for sure */ - if (dev->hw_revision <= ENE_HW_B) +/* + * this enables alternative input via fan tachometer sensor and bypasses + * the hw CIR engine + */ +static void ene_enable_fan_input(struct ene_device *dev, bool enable) +{ + if (!dev->hw_fan_input) return; - /* receiver not learning capable, still set gpio40 correctly */ - if (!dev->hw_learning_and_tx_capable) { - ene_enable_gpio40_receive(dev, !dev->hw_gpio40_learning); - return; + if (!enable) + ene_write_reg(dev, ENE_FAN_AS_IN1, 0); + else { + ene_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN); + ene_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN); } + dev->rx_fan_input_inuse = enable; +} + +/* setup the receiver for RX*/ +static void ene_rx_setup(struct ene_device *dev) +{ + bool learning_mode = dev->learning_enabled || + dev->carrier_detect_enabled; + int sample_period_adjust = 0; + + /* This selects RLC input and clears CFG2 settings */ + ene_write_reg(dev, ENE_CIRCFG2, 0x00); + + /* set sample period*/ + if (sample_period == ENE_DEFAULT_SAMPLE_PERIOD) + sample_period_adjust = + dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 1 : 2; + + ene_write_reg(dev, ENE_CIRRLC_CFG, + (sample_period + sample_period_adjust) | + ENE_CIRRLC_CFG_OVERFLOW); + /* revB doesn't support inputs */ + if (dev->hw_revision < ENE_HW_C) + goto select_timeout; - /* enable learning mode */ if (learning_mode) { - ene_enable_gpio40_receive(dev, dev->hw_gpio40_learning); - /* fan input is not used for learning */ - if (dev->hw_fan_as_normal_input) - ene_enable_fan_receive(dev, 0); + WARN_ON(!dev->hw_learning_and_tx_capable); - /* disable learning mode */ - } else { - if (dev->hw_fan_as_normal_input) { - ene_enable_fan_receive(dev, 1); - ene_enable_normal_receive(dev, 0); - } else - ene_enable_gpio40_receive(dev, - !dev->hw_gpio40_learning); - } + /* Enable the opposite of the normal input + That means that if GPIO40 is normally used, use GPIO0A + and vice versa. + This input will carry non demodulated + signal, and we will tell the hw to demodulate it itself */ + ene_select_rx_input(dev, !dev->hw_use_gpio_0a); + dev->rx_fan_input_inuse = false; - /* set few additional settings for this mode */ - ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_mode ? - ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1); + /* Enable carrier demodulation */ + ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD); - ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_mode ? - ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2); + /* Enable carrier detection */ + ene_write_reg(dev, ENE_CIRCAR_PULS, 0x63); + ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT, + dev->carrier_detect_enabled || debug); + } else { + if (dev->hw_fan_input) + dev->rx_fan_input_inuse = true; + else + ene_select_rx_input(dev, dev->hw_use_gpio_0a); + + /* Disable carrier detection & demodulation */ + ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD); + ene_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT); + } +select_timeout: if (dev->rx_fan_input_inuse) { - dev->props->rx_resolution = ENE_SAMPLE_PERIOD_FAN * 1000; + dev->props->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN); - dev->props->timeout = - ENE_FAN_VALUE_MASK * ENE_SAMPLE_PERIOD_FAN * 1000; + /* Fan input doesn't support timeouts, it just ends the + input with a maximum sample */ + dev->props->min_timeout = dev->props->max_timeout = + MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK * + ENE_FW_SAMPLE_PERIOD_FAN); } else { - dev->props->rx_resolution = sample_period * 1000; - dev->props->timeout = ENE_MAXGAP * 1000; + dev->props->rx_resolution = MS_TO_NS(sample_period); + + /* Theoreticly timeout is unlimited, but we cap it + * because it was seen that on one device, it + * would stop sending spaces after around 250 msec. + * Besides, this is close to 2^32 anyway and timeout is u32. + */ + dev->props->min_timeout = MS_TO_NS(127 * sample_period); + dev->props->max_timeout = MS_TO_NS(200000); } + + if (dev->hw_learning_and_tx_capable) + dev->props->tx_resolution = MS_TO_NS(sample_period); + + if (dev->props->timeout > dev->props->max_timeout) + dev->props->timeout = dev->props->max_timeout; + if (dev->props->timeout < dev->props->min_timeout) + dev->props->timeout = dev->props->min_timeout; } /* Enable the device for receive */ static void ene_rx_enable(struct ene_device *dev) { u8 reg_value; + dbg("RX: setup receiver, learning mode = %d", learning_mode); + /* Enable system interrupt */ if (dev->hw_revision < ENE_HW_C) { - ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1); - ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01); + ene_write_reg(dev, ENEB_IRQ, dev->irq << 1); + ene_write_reg(dev, ENEB_IRQ_UNK1, 0x01); } else { - reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0; - reg_value |= ENEC_IRQ_UNK_EN; - reg_value &= ~ENEC_IRQ_STATUS; - reg_value |= (dev->irq & ENEC_IRQ_MASK); - ene_hw_write_reg(dev, ENEC_IRQ, reg_value); - ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63); + reg_value = ene_read_reg(dev, ENE_IRQ) & 0xF0; + reg_value |= ENE_IRQ_UNK_EN; + reg_value &= ~ENE_IRQ_STATUS; + reg_value |= (dev->irq & ENE_IRQ_MASK); + ene_write_reg(dev, ENE_IRQ, reg_value); } - ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00); - ene_rx_set_inputs(dev); - - /* set sampling period */ - ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period); + /* Enable inputs */ + ene_enable_fan_input(dev, dev->rx_fan_input_inuse); + ene_enable_cir_engine(dev, !dev->rx_fan_input_inuse); /* ack any pending irqs - just in case */ ene_irq_status(dev); /* enable firmware bits */ - ene_hw_write_reg_mask(dev, ENE_FW1, - ENE_FW1_ENABLE | ENE_FW1_IRQ, - ENE_FW1_ENABLE | ENE_FW1_IRQ); + ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ); /* enter idle mode */ - ir_raw_event_set_idle(dev->idev, 1); - ir_raw_event_reset(dev->idev); - + ir_raw_event_set_idle(dev->idev, true); + dev->rx_enabled = true; } /* Disable the device receiver */ static void ene_rx_disable(struct ene_device *dev) { /* disable inputs */ - ene_enable_normal_receive(dev, 0); - - if (dev->hw_fan_as_normal_input) - ene_enable_fan_receive(dev, 0); + ene_enable_cir_engine(dev, false); + ene_enable_fan_input(dev, false); /* disable hardware IRQ and firmware flag */ - ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ); + ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ); - ir_raw_event_set_idle(dev->idev, 1); - ir_raw_event_reset(dev->idev); + ir_raw_event_set_idle(dev->idev, true); + dev->rx_enabled = false; } - /* prepare transmission */ static void ene_tx_prepare(struct ene_device *dev) { - u8 conf1; + u8 conf1 = ene_read_reg(dev, ENE_CIRCFG); + u8 fwreg2 = ene_read_reg(dev, ENE_FW2); - conf1 = ene_hw_read_reg(dev, ENE_CIR_CONF1); dev->saved_conf1 = conf1; - if (dev->hw_revision == ENE_HW_C) - conf1 &= ~ENE_CIR_CONF1_TX_CLEAR; + /* Show information about currently connected transmitter jacks */ + if (fwreg2 & ENE_FW2_EMMITER1_CONN) + dbg("TX: Transmitter #1 is connected"); - /* Enable TX engine */ - conf1 |= ENE_CIR_CONF1_TX_ON; + if (fwreg2 & ENE_FW2_EMMITER2_CONN) + dbg("TX: Transmitter #2 is connected"); - /* Set carrier */ - if (dev->tx_period) { + if (!(fwreg2 & (ENE_FW2_EMMITER1_CONN | ENE_FW2_EMMITER2_CONN))) + ene_warn("TX: transmitter cable isn't connected!"); - /* NOTE: duty cycle handling is just a guess, it might - not be aviable. Default values were tested */ - int tx_period_in500ns = dev->tx_period * 2; + /* Set transmitter mask */ + ene_set_clear_reg_mask(dev, ENE_GPIOFS8, ENE_GPIOFS8_GPIO41, + !!(dev->transmitter_mask & 0x01)); + ene_set_clear_reg_mask(dev, ENE_GPIOFS1, ENE_GPIOFS1_GPIO0D, + !!(dev->transmitter_mask & 0x02)); - int tx_pulse_width_in_500ns = - tx_period_in500ns / (100 / dev->tx_duty_cycle); + /* Set the carrier period && duty cycle */ + if (dev->tx_period) { - if (!tx_pulse_width_in_500ns) - tx_pulse_width_in_500ns = 1; + int tx_puls_width = dev->tx_period / (100 / dev->tx_duty_cycle); - ene_dbg("TX: pulse distance = %d * 500 ns", tx_period_in500ns); - ene_dbg("TX: pulse width = %d * 500 ns", - tx_pulse_width_in_500ns); + if (!tx_puls_width) + tx_puls_width = 1; - ene_hw_write_reg(dev, ENE_TX_PERIOD, ENE_TX_PERIOD_UNKBIT | - tx_period_in500ns); + dbg("TX: pulse distance = %d * 500 ns", dev->tx_period); + dbg("TX: pulse width = %d * 500 ns", tx_puls_width); - ene_hw_write_reg(dev, ENE_TX_PERIOD_PULSE, - tx_pulse_width_in_500ns); + ene_write_reg(dev, ENE_CIRMOD_PRD, ENE_CIRMOD_PRD_POL | + dev->tx_period); - conf1 |= ENE_CIR_CONF1_TX_CARR; + ene_write_reg(dev, ENE_CIRMOD_HPRD, tx_puls_width); + + conf1 |= ENE_CIRCFG_TX_CARR; } else - conf1 &= ~ENE_CIR_CONF1_TX_CARR; + conf1 &= ~ENE_CIRCFG_TX_CARR; - ene_hw_write_reg(dev, ENE_CIR_CONF1, conf1); + /* disable receive on revc */ + if (dev->hw_revision == ENE_HW_C) + conf1 &= ~ENE_CIRCFG_RX_EN; + /* Enable TX engine */ + conf1 |= ENE_CIRCFG_TX_EN | ENE_CIRCFG_TX_IRQ; + ene_write_reg(dev, ENE_CIRCFG, conf1); } /* end transmission */ static void ene_tx_complete(struct ene_device *dev) { - ene_hw_write_reg(dev, ENE_CIR_CONF1, dev->saved_conf1); + ene_write_reg(dev, ENE_CIRCFG, dev->saved_conf1); dev->tx_buffer = NULL; } -/* set transmit mask */ -static void ene_tx_hw_set_transmiter_mask(struct ene_device *dev) -{ - u8 txport1 = ene_hw_read_reg(dev, ENE_TX_PORT1) & ~ENE_TX_PORT1_EN; - u8 txport2 = ene_hw_read_reg(dev, ENE_TX_PORT2) & ~ENE_TX_PORT2_EN; - - if (dev->transmitter_mask & 0x01) - txport1 |= ENE_TX_PORT1_EN; - - if (dev->transmitter_mask & 0x02) - txport2 |= ENE_TX_PORT2_EN; - - ene_hw_write_reg(dev, ENE_TX_PORT1, txport1); - ene_hw_write_reg(dev, ENE_TX_PORT2, txport2); -} /* TX one sample - must be called with dev->hw_lock*/ static void ene_tx_sample(struct ene_device *dev) { u8 raw_tx; u32 sample; + bool pulse = dev->tx_sample_pulse; if (!dev->tx_buffer) { - ene_dbg("TX: attempt to transmit NULL buffer"); + ene_warn("TX: BUG: attempt to transmit NULL buffer"); return; } /* Grab next TX sample */ if (!dev->tx_sample) { -again: - if (dev->tx_pos == dev->tx_len + 1) { + + if (dev->tx_pos == dev->tx_len) { if (!dev->tx_done) { - ene_dbg("TX: no more data to send"); - dev->tx_done = 1; + dbg("TX: no more data to send"); + dev->tx_done = true; goto exit; } else { - ene_dbg("TX: last sample sent by hardware"); + dbg("TX: last sample sent by hardware"); ene_tx_complete(dev); complete(&dev->tx_complete); return; @@ -425,23 +470,23 @@ again: sample = dev->tx_buffer[dev->tx_pos++]; dev->tx_sample_pulse = !dev->tx_sample_pulse; - ene_dbg("TX: sample %8d (%s)", sample, dev->tx_sample_pulse ? - "pulse" : "space"); + dev->tx_sample = DIV_ROUND_CLOSEST(sample, sample_period); - dev->tx_sample = DIV_ROUND_CLOSEST(sample, ENE_TX_SMPL_PERIOD); - - /* guard against too short samples */ if (!dev->tx_sample) - goto again; + dev->tx_sample = 1; } - raw_tx = min(dev->tx_sample , (unsigned int)ENE_TX_SMLP_MASK); + raw_tx = min(dev->tx_sample , (unsigned int)ENE_CIRRLC_OUT_MASK); dev->tx_sample -= raw_tx; - if (dev->tx_sample_pulse) - raw_tx |= ENE_TX_PULSE_MASK; + dbg("TX: sample %8d (%s)", raw_tx * sample_period, + pulse ? "pulse" : "space"); + if (pulse) + raw_tx |= ENE_CIRRLC_OUT_PULSE; + + ene_write_reg(dev, + dev->tx_reg ? ENE_CIRRLC_OUT1 : ENE_CIRRLC_OUT0, raw_tx); - ene_hw_write_reg(dev, ENE_TX_INPUT1 + dev->tx_reg, raw_tx); dev->tx_reg = !dev->tx_reg; exit: /* simulate TX done interrupt */ @@ -460,82 +505,204 @@ static void ene_tx_irqsim(unsigned long data) spin_unlock_irqrestore(&dev->hw_lock, flags); } +/* Read properities of hw sample buffer */ +static void ene_setup_hw_buffer(struct ene_device *dev) +{ + u16 tmp; + + ene_read_hw_pointer(dev); + dev->r_pointer = dev->w_pointer; + + if (!dev->hw_extra_buffer) { + dev->buffer_len = ENE_FW_PACKET_SIZE * 2; + return; + } + + tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER); + tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER+1) << 8; + dev->extra_buf1_address = tmp; + + dev->extra_buf1_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 2); + + tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 3); + tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 4) << 8; + dev->extra_buf2_address = tmp; + + dev->extra_buf2_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 5); + + dev->buffer_len = dev->extra_buf1_len + dev->extra_buf2_len + 8; + + ene_notice("Hardware uses 2 extended buffers:"); + ene_notice(" 0x%04x - len : %d", dev->extra_buf1_address, + dev->extra_buf1_len); + ene_notice(" 0x%04x - len : %d", dev->extra_buf2_address, + dev->extra_buf2_len); + + ene_notice("Total buffer len = %d", dev->buffer_len); + + if (dev->buffer_len > 64 || dev->buffer_len < 16) + goto error; + + if (dev->extra_buf1_address > 0xFBFC || + dev->extra_buf1_address < 0xEC00) + goto error; + + if (dev->extra_buf2_address > 0xFBFC || + dev->extra_buf2_address < 0xEC00) + goto error; + + if (dev->r_pointer > dev->buffer_len) + goto error; + + ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND); + return; +error: + ene_warn("Error validating extra buffers, device probably won't work"); + dev->hw_extra_buffer = false; + ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND); +} + + +/* Restore the pointers to extra buffers - to make module reload work*/ +static void ene_restore_extra_buffer(struct ene_device *dev) +{ + if (!dev->hw_extra_buffer) + return; + + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 0, + dev->extra_buf1_address & 0xFF); + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 1, + dev->extra_buf1_address >> 8); + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 2, dev->extra_buf1_len); + + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 3, + dev->extra_buf2_address & 0xFF); + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 4, + dev->extra_buf2_address >> 8); + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 5, + dev->extra_buf2_len); + ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND); +} + /* read irq status and ack it */ static int ene_irq_status(struct ene_device *dev) { u8 irq_status; u8 fw_flags1, fw_flags2; - int cur_rx_pointer; int retval = 0; - fw_flags2 = ene_hw_read_reg(dev, ENE_FW2); - cur_rx_pointer = !!(fw_flags2 & ENE_FW2_BUF_HIGH); + fw_flags2 = ene_read_reg(dev, ENE_FW2); if (dev->hw_revision < ENE_HW_C) { - irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS); + irq_status = ene_read_reg(dev, ENEB_IRQ_STATUS); if (!(irq_status & ENEB_IRQ_STATUS_IR)) return 0; - ene_hw_write_reg(dev, ENEB_IRQ_STATUS, - irq_status & ~ENEB_IRQ_STATUS_IR); - dev->rx_pointer = cur_rx_pointer; + ene_clear_reg_mask(dev, ENEB_IRQ_STATUS, ENEB_IRQ_STATUS_IR); return ENE_IRQ_RX; } - irq_status = ene_hw_read_reg(dev, ENEC_IRQ); - - if (!(irq_status & ENEC_IRQ_STATUS)) + irq_status = ene_read_reg(dev, ENE_IRQ); + if (!(irq_status & ENE_IRQ_STATUS)) return 0; /* original driver does that twice - a workaround ? */ - ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS); - ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS); + ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS); + ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS); - /* clear unknown flag in F8F9 */ - if (fw_flags2 & ENE_FW2_IRQ_CLR) - ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR); + /* check RX interrupt */ + if (fw_flags2 & ENE_FW2_RXIRQ) { + retval |= ENE_IRQ_RX; + ene_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_RXIRQ); + } - /* check if this is a TX interrupt */ - fw_flags1 = ene_hw_read_reg(dev, ENE_FW1); + /* check TX interrupt */ + fw_flags1 = ene_read_reg(dev, ENE_FW1); if (fw_flags1 & ENE_FW1_TXIRQ) { - ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ); + ene_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ); retval |= ENE_IRQ_TX; } - /* Check if this is RX interrupt */ - if (dev->rx_pointer != cur_rx_pointer) { - retval |= ENE_IRQ_RX; - dev->rx_pointer = cur_rx_pointer; + return retval; +} - } else if (!(retval & ENE_IRQ_TX)) { - ene_dbg("RX: interrupt without change in RX pointer(%d)", - dev->rx_pointer); - retval |= ENE_IRQ_RX; +/* Read hardware write pointer */ +static void ene_read_hw_pointer(struct ene_device *dev) +{ + if (dev->hw_extra_buffer) + dev->w_pointer = ene_read_reg(dev, ENE_FW_RX_POINTER); + else + dev->w_pointer = ene_read_reg(dev, ENE_FW2) + & ENE_FW2_BUF_WPTR ? 0 : ENE_FW_PACKET_SIZE; + + dbg_verbose("RB: HW write pointer: %02x, driver read pointer: %02x", + dev->w_pointer, dev->r_pointer); +} + +/* Gets address of next sample from HW ring buffer */ +static int ene_get_sample_reg(struct ene_device *dev) +{ + int r_pointer; + + if (dev->r_pointer == dev->w_pointer) { + dbg_verbose("RB: hit end, try update w_pointer"); + ene_read_hw_pointer(dev); } - if ((retval & ENE_IRQ_RX) && (retval & ENE_IRQ_TX)) - ene_dbg("both RX and TX interrupt at same time"); + if (dev->r_pointer == dev->w_pointer) { + dbg_verbose("RB: end of data at %d", dev->r_pointer); + return 0; + } - return retval; + dbg_verbose("RB: reading at offset %d", dev->r_pointer); + r_pointer = dev->r_pointer; + + dev->r_pointer++; + if (dev->r_pointer == dev->buffer_len) + dev->r_pointer = 0; + + dbg_verbose("RB: next read will be from offset %d", dev->r_pointer); + + if (r_pointer < 8) { + dbg_verbose("RB: read at main buffer at %d", r_pointer); + return ENE_FW_SAMPLE_BUFFER + r_pointer; + } + + r_pointer -= 8; + + if (r_pointer < dev->extra_buf1_len) { + dbg_verbose("RB: read at 1st extra buffer at %d", r_pointer); + return dev->extra_buf1_address + r_pointer; + } + + r_pointer -= dev->extra_buf1_len; + + if (r_pointer < dev->extra_buf2_len) { + dbg_verbose("RB: read at 2nd extra buffer at %d", r_pointer); + return dev->extra_buf2_address + r_pointer; + } + + dbg("attempt to read beyong ring bufer end"); + return 0; } /* interrupt handler */ static irqreturn_t ene_isr(int irq, void *data) { - u16 hw_value; - int i, hw_sample; - int pulse; - int irq_status; + u16 hw_value, reg; + int hw_sample, irq_status; + bool pulse; unsigned long flags; - int carrier = 0; irqreturn_t retval = IRQ_NONE; struct ene_device *dev = (struct ene_device *)data; struct ir_raw_event ev; - spin_lock_irqsave(&dev->hw_lock, flags); + + dbg_verbose("ISR called"); + ene_read_hw_pointer(dev); irq_status = ene_irq_status(dev); if (!irq_status) @@ -544,9 +711,9 @@ static irqreturn_t ene_isr(int irq, void *data) retval = IRQ_HANDLED; if (irq_status & ENE_IRQ_TX) { - + dbg_verbose("TX interrupt"); if (!dev->hw_learning_and_tx_capable) { - ene_dbg("TX interrupt on unsupported device!"); + dbg("TX interrupt on unsupported device!"); goto unlock; } ene_tx_sample(dev); @@ -555,48 +722,57 @@ static irqreturn_t ene_isr(int irq, void *data) if (!(irq_status & ENE_IRQ_RX)) goto unlock; + dbg_verbose("RX interrupt"); if (dev->carrier_detect_enabled || debug) - carrier = ene_rx_sense_carrier(dev); -#if 0 - /* TODO */ - if (dev->carrier_detect_enabled && carrier) - ir_raw_event_report_frequency(dev->idev, carrier); -#endif + ene_rx_sense_carrier(dev); + + /* On hardware that don't support extra buffer we need to trust + the interrupt and not track the read pointer */ + if (!dev->hw_extra_buffer) + dev->r_pointer = dev->w_pointer == 0 ? ENE_FW_PACKET_SIZE : 0; + + while (1) { + + reg = ene_get_sample_reg(dev); + + dbg_verbose("next sample to read at: %04x", reg); + if (!reg) + break; - for (i = 0; i < ENE_SAMPLES_SIZE; i++) { - hw_value = ene_hw_read_reg(dev, - ENE_SAMPLE_BUFFER + dev->rx_pointer * 4 + i); + hw_value = ene_read_reg(dev, reg); if (dev->rx_fan_input_inuse) { + + int offset = ENE_FW_SMPL_BUF_FAN - ENE_FW_SAMPLE_BUFFER; + /* read high part of the sample */ - hw_value |= ene_hw_read_reg(dev, - ENE_SAMPLE_BUFFER_FAN + - dev->rx_pointer * 4 + i) << 8; - pulse = hw_value & ENE_FAN_SMPL_PULS_MSK; + hw_value |= ene_read_reg(dev, reg + offset) << 8; + pulse = hw_value & ENE_FW_SMPL_BUF_FAN_PLS; /* clear space bit, and other unused bits */ - hw_value &= ENE_FAN_VALUE_MASK; - hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN; + hw_value &= ENE_FW_SMPL_BUF_FAN_MSK; + hw_sample = hw_value * ENE_FW_SAMPLE_PERIOD_FAN; } else { - pulse = !(hw_value & ENE_SAMPLE_SPC_MASK); - hw_value &= ENE_SAMPLE_VALUE_MASK; + pulse = !(hw_value & ENE_FW_SAMPLE_SPACE); + hw_value &= ~ENE_FW_SAMPLE_SPACE; hw_sample = hw_value * sample_period; if (dev->rx_period_adjust) { - hw_sample *= (100 - dev->rx_period_adjust); - hw_sample /= 100; + hw_sample *= 100; + hw_sample /= (100 + dev->rx_period_adjust); } } - /* no more data */ - if (!(hw_value)) - break; - ene_dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space"); + if (!dev->hw_extra_buffer && !hw_sample) { + dev->r_pointer = dev->w_pointer; + continue; + } + dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space"); - ev.duration = hw_sample * 1000; + ev.duration = MS_TO_NS(hw_sample); ev.pulse = pulse; ir_raw_event_store_with_filter(dev->idev, &ev); } @@ -611,16 +787,12 @@ unlock: static void ene_setup_settings(struct ene_device *dev) { dev->tx_period = 32; - dev->tx_duty_cycle = 25; /*%*/ - dev->transmitter_mask = 3; - - /* Force learning mode if (input == 2), otherwise - let user set it with LIRC_SET_REC_CARRIER */ - dev->learning_enabled = - (input == 2 && dev->hw_learning_and_tx_capable); - - dev->rx_pointer = -1; + dev->tx_duty_cycle = 50; /*%*/ + dev->transmitter_mask = 0x03; + dev->learning_enabled = learning_mode; + /* Set reasonable default timeout */ + dev->props->timeout = MS_TO_NS(150000); } /* outside interface: called on first open*/ @@ -630,8 +802,6 @@ static int ene_open(void *data) unsigned long flags; spin_lock_irqsave(&dev->hw_lock, flags); - dev->in_use = 1; - ene_setup_settings(dev); ene_rx_enable(dev); spin_unlock_irqrestore(&dev->hw_lock, flags); return 0; @@ -645,7 +815,6 @@ static void ene_close(void *data) spin_lock_irqsave(&dev->hw_lock, flags); ene_rx_disable(dev); - dev->in_use = 0; spin_unlock_irqrestore(&dev->hw_lock, flags); } @@ -654,11 +823,11 @@ static int ene_set_tx_mask(void *data, u32 tx_mask) { struct ene_device *dev = (struct ene_device *)data; unsigned long flags; - ene_dbg("TX: attempt to set transmitter mask %02x", tx_mask); + dbg("TX: attempt to set transmitter mask %02x", tx_mask); /* invalid txmask */ - if (!tx_mask || tx_mask & ~0x3) { - ene_dbg("TX: invalid mask"); + if (!tx_mask || tx_mask & ~0x03) { + dbg("TX: invalid mask"); /* return count of transmitters */ return 2; } @@ -674,28 +843,42 @@ static int ene_set_tx_carrier(void *data, u32 carrier) { struct ene_device *dev = (struct ene_device *)data; unsigned long flags; - u32 period = 1000000 / carrier; /* (1 / freq) (* # usec in 1 sec) */ + u32 period = 2000000 / carrier; - ene_dbg("TX: attempt to set tx carrier to %d kHz", carrier); + dbg("TX: attempt to set tx carrier to %d kHz", carrier); - if (period && (period > ENE_TX_PERIOD_MAX || - period < ENE_TX_PERIOD_MIN)) { + if (period && (period > ENE_CIRMOD_PRD_MAX || + period < ENE_CIRMOD_PRD_MIN)) { - ene_dbg("TX: out of range %d-%d carrier, " - "falling back to 32 kHz", - 1000 / ENE_TX_PERIOD_MIN, - 1000 / ENE_TX_PERIOD_MAX); + dbg("TX: out of range %d-%d kHz carrier", + 2000 / ENE_CIRMOD_PRD_MIN, + 2000 / ENE_CIRMOD_PRD_MAX); - period = 32; /* this is just a coincidence!!! */ + return -1; } - ene_dbg("TX: set carrier to %d kHz", carrier); + dbg("TX: set carrier to %d kHz", carrier); spin_lock_irqsave(&dev->hw_lock, flags); dev->tx_period = period; spin_unlock_irqrestore(&dev->hw_lock, flags); return 0; } +/*outside interface : set tx duty cycle */ +static int ene_set_tx_duty_cycle(void *data, u32 duty_cycle) +{ + struct ene_device *dev = (struct ene_device *)data; + unsigned long flags; + + dbg("TX: setting duty cycle to %d%%", duty_cycle); + + BUG_ON(!duty_cycle || duty_cycle >= 100); + + spin_lock_irqsave(&dev->hw_lock, flags); + dev->tx_duty_cycle = duty_cycle; + spin_unlock_irqrestore(&dev->hw_lock, flags); + return 0; +} /* outside interface: enable learning mode */ static int ene_set_learning_mode(void *data, int enable) @@ -707,31 +890,25 @@ static int ene_set_learning_mode(void *data, int enable) spin_lock_irqsave(&dev->hw_lock, flags); dev->learning_enabled = enable; - ene_rx_set_inputs(dev); + ene_rx_disable(dev); + ene_rx_setup(dev); + ene_rx_enable(dev); spin_unlock_irqrestore(&dev->hw_lock, flags); return 0; } -/* outside interface: set rec carrier */ -static int ene_set_rec_carrier(void *data, u32 min, u32 max) -{ - struct ene_device *dev = (struct ene_device *)data; - ene_set_learning_mode(dev, - max > ENE_NORMAL_RX_HI || min < ENE_NORMAL_RX_LOW); - return 0; -} - /* outside interface: enable or disable idle mode */ static void ene_rx_set_idle(void *data, int idle) { struct ene_device *dev = (struct ene_device *)data; - ene_dbg("%sabling idle mode", idle ? "en" : "dis"); - ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD, - (enable_idle && idle) ? 0 : ENE_CIR_SAMPLE_OVERFLOW, - ENE_CIR_SAMPLE_OVERFLOW); -} + if (!idle) + return; + dbg("RX: stopping the receiver"); + ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN); + ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN); +} /* outside interface: transmit */ static int ene_transmit(void *data, int *buf, u32 n) @@ -747,11 +924,10 @@ static int ene_transmit(void *data, int *buf, u32 n) dev->tx_sample = 0; dev->tx_sample_pulse = 0; - ene_dbg("TX: %d samples", dev->tx_len); + dbg("TX: %d samples", dev->tx_len); spin_lock_irqsave(&dev->hw_lock, flags); - ene_tx_hw_set_transmiter_mask(dev); ene_tx_prepare(dev); /* Transmit first two samples */ @@ -761,16 +937,15 @@ static int ene_transmit(void *data, int *buf, u32 n) spin_unlock_irqrestore(&dev->hw_lock, flags); if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) { - ene_dbg("TX: timeout"); + dbg("TX: timeout"); spin_lock_irqsave(&dev->hw_lock, flags); ene_tx_complete(dev); spin_unlock_irqrestore(&dev->hw_lock, flags); } else - ene_dbg("TX: done"); + dbg("TX: done"); return n; } - /* probe entry */ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id) { @@ -791,114 +966,96 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id) error = -ENODEV; if (!pnp_port_valid(pnp_dev, 0) || - pnp_port_len(pnp_dev, 0) < ENE_MAX_IO) + pnp_port_len(pnp_dev, 0) < ENE_IO_SIZE) goto error; if (!pnp_irq_valid(pnp_dev, 0)) goto error; - dev->hw_io = pnp_port_start(pnp_dev, 0); - dev->irq = pnp_irq(pnp_dev, 0); spin_lock_init(&dev->hw_lock); /* claim the resources */ error = -EBUSY; - if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME)) + dev->hw_io = pnp_port_start(pnp_dev, 0); + if (!request_region(dev->hw_io, ENE_IO_SIZE, ENE_DRIVER_NAME)) { + dev->hw_io = -1; + dev->irq = -1; goto error; + } + dev->irq = pnp_irq(pnp_dev, 0); if (request_irq(dev->irq, ene_isr, - IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev)) + IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev)) { + dev->irq = -1; goto error; + } pnp_set_drvdata(pnp_dev, dev); dev->pnp_dev = pnp_dev; + /* don't allow too short/long sample periods */ + if (sample_period < 5 || sample_period > 0x7F) + sample_period = ENE_DEFAULT_SAMPLE_PERIOD; + /* detect hardware version and features */ error = ene_hw_detect(dev); if (error) goto error; - ene_setup_settings(dev); - if (!dev->hw_learning_and_tx_capable && txsim) { - dev->hw_learning_and_tx_capable = 1; + dev->hw_learning_and_tx_capable = true; setup_timer(&dev->tx_sim_timer, ene_tx_irqsim, (long unsigned int)dev); - ene_printk(KERN_WARNING, - "Simulation of TX activated\n"); + ene_warn("Simulation of TX activated"); } + if (!dev->hw_learning_and_tx_capable) + learning_mode = false; + ir_props->driver_type = RC_DRIVER_IR_RAW; ir_props->allowed_protos = IR_TYPE_ALL; ir_props->priv = dev; ir_props->open = ene_open; ir_props->close = ene_close; - ir_props->min_timeout = ENE_MINGAP * 1000; - ir_props->max_timeout = ENE_MAXGAP * 1000; - ir_props->timeout = ENE_MAXGAP * 1000; - - if (dev->hw_revision == ENE_HW_B) - ir_props->s_idle = ene_rx_set_idle; - + ir_props->s_idle = ene_rx_set_idle; dev->props = ir_props; dev->idev = input_dev; - /* don't allow too short/long sample periods */ - if (sample_period < 5 || sample_period > 0x7F) - sample_period = -1; - - /* choose default sample period */ - if (sample_period == -1) { - - sample_period = 50; - - /* on revB, hardware idle mode eats first sample - if we set too low sample period */ - if (dev->hw_revision == ENE_HW_B && enable_idle) - sample_period = 75; - } - - ir_props->rx_resolution = sample_period * 1000; - if (dev->hw_learning_and_tx_capable) { - ir_props->s_learning_mode = ene_set_learning_mode; - - if (input == 0) - ir_props->s_rx_carrier_range = ene_set_rec_carrier; - init_completion(&dev->tx_complete); ir_props->tx_ir = ene_transmit; ir_props->s_tx_mask = ene_set_tx_mask; ir_props->s_tx_carrier = ene_set_tx_carrier; - ir_props->tx_resolution = ENE_TX_SMPL_PERIOD * 1000; + ir_props->s_tx_duty_cycle = ene_set_tx_duty_cycle; /* ir_props->s_carrier_report = ene_set_carrier_report; */ } + ene_setup_hw_buffer(dev); + ene_setup_settings(dev); + ene_rx_setup(dev); - device_set_wakeup_capable(&pnp_dev->dev, 1); - device_set_wakeup_enable(&pnp_dev->dev, 1); + device_set_wakeup_capable(&pnp_dev->dev, true); + device_set_wakeup_enable(&pnp_dev->dev, true); if (dev->hw_learning_and_tx_capable) input_dev->name = "ENE eHome Infrared Remote Transceiver"; else input_dev->name = "ENE eHome Infrared Remote Receiver"; - error = -ENODEV; if (ir_input_register(input_dev, RC_MAP_RC6_MCE, ir_props, ENE_DRIVER_NAME)) goto error; - - ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n"); + ene_notice("driver has been succesfully loaded"); return 0; error: - if (dev->irq) + if (dev && dev->irq >= 0) free_irq(dev->irq, dev); - if (dev->hw_io) - release_region(dev->hw_io, ENE_MAX_IO); + if (dev && dev->hw_io >= 0) + release_region(dev->hw_io, ENE_IO_SIZE); input_free_device(input_dev); kfree(ir_props); @@ -914,10 +1071,11 @@ static void ene_remove(struct pnp_dev *pnp_dev) spin_lock_irqsave(&dev->hw_lock, flags); ene_rx_disable(dev); + ene_restore_extra_buffer(dev); spin_unlock_irqrestore(&dev->hw_lock, flags); free_irq(dev->irq, dev); - release_region(dev->hw_io, ENE_MAX_IO); + release_region(dev->hw_io, ENE_IO_SIZE); ir_input_unregister(dev->idev); kfree(dev->props); kfree(dev); @@ -927,28 +1085,28 @@ static void ene_remove(struct pnp_dev *pnp_dev) static void ene_enable_wake(struct ene_device *dev, int enable) { enable = enable && device_may_wakeup(&dev->pnp_dev->dev); - - ene_dbg("wake on IR %s", enable ? "enabled" : "disabled"); - - ene_hw_write_reg_mask(dev, ENE_FW1, enable ? - ENE_FW1_WAKE : 0, ENE_FW1_WAKE); + dbg("wake on IR %s", enable ? "enabled" : "disabled"); + ene_set_clear_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, enable); } #ifdef CONFIG_PM static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state) { struct ene_device *dev = pnp_get_drvdata(pnp_dev); - ene_enable_wake(dev, 1); + ene_enable_wake(dev, true); + + /* TODO: add support for wake pattern */ return 0; } static int ene_resume(struct pnp_dev *pnp_dev) { struct ene_device *dev = pnp_get_drvdata(pnp_dev); - if (dev->in_use) + if (dev->rx_enabled) { + ene_rx_setup(dev); ene_rx_enable(dev); - - ene_enable_wake(dev, 0); + } + ene_enable_wake(dev, false); return 0; } #endif @@ -956,7 +1114,7 @@ static int ene_resume(struct pnp_dev *pnp_dev) static void ene_shutdown(struct pnp_dev *pnp_dev) { struct ene_device *dev = pnp_get_drvdata(pnp_dev); - ene_enable_wake(dev, 1); + ene_enable_wake(dev, true); } static const struct pnp_device_id ene_ids[] = { @@ -994,18 +1152,11 @@ static void ene_exit(void) module_param(sample_period, int, S_IRUGO); MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)"); -module_param(enable_idle, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(enable_idle, - "Enables turning off signal sampling after long inactivity time; " - "if disabled might help detecting input signal (default: enabled)" - " (KB3926B only)"); - -module_param(input, bool, S_IRUGO); -MODULE_PARM_DESC(input, "select which input to use " - "0 - auto, 1 - standard, 2 - wideband(KB3926C+)"); +module_param(learning_mode, bool, S_IRUGO); +MODULE_PARM_DESC(learning_mode, "Enable learning mode by default"); module_param(debug, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Enable debug (debug=2 verbose debug output)"); +MODULE_PARM_DESC(debug, "Debug level"); module_param(txsim, bool, S_IRUGO); MODULE_PARM_DESC(txsim, @@ -1013,8 +1164,8 @@ MODULE_PARM_DESC(txsim, MODULE_DEVICE_TABLE(pnp, ene_ids); MODULE_DESCRIPTION - ("Infrared input driver for KB3926B/KB3926C/KB3926D " - "(aka ENE0100/ENE0200/ENE0201) CIR port"); + ("Infrared input driver for KB3926B/C/D/E/F " + "(aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port"); MODULE_AUTHOR("Maxim Levitsky"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/IR/ene_ir.h b/drivers/media/IR/ene_ir.h index 54c76af..39c707b 100644 --- a/drivers/media/IR/ene_ir.h +++ b/drivers/media/IR/ene_ir.h @@ -1,5 +1,5 @@ /* - * driver for ENE KB3926 B/C/D CIR (also known as ENE0XXX) + * driver for ENE KB3926 B/C/D/E/F CIR (also known as ENE0XXX) * * Copyright (C) 2010 Maxim Levitsky * @@ -26,43 +26,50 @@ #define ENE_ADDR_HI 1 /* hi byte of register address */ #define ENE_ADDR_LO 2 /* low byte of register address */ #define ENE_IO 3 /* read/write window */ -#define ENE_MAX_IO 4 - -/* 8 bytes of samples, divided in 2 halfs*/ -#define ENE_SAMPLE_BUFFER 0xF8F0 /* regular sample buffer */ -#define ENE_SAMPLE_SPC_MASK 0x80 /* sample is space */ -#define ENE_SAMPLE_VALUE_MASK 0x7F -#define ENE_SAMPLE_OVERFLOW 0x7F -#define ENE_SAMPLES_SIZE 4 - -/* fan input sample buffer */ -#define ENE_SAMPLE_BUFFER_FAN 0xF8FB /* this buffer holds high byte of */ - /* each sample of normal buffer */ -#define ENE_FAN_SMPL_PULS_MSK 0x8000 /* this bit of combined sample */ - /* if set, says that sample is pulse */ -#define ENE_FAN_VALUE_MASK 0x0FFF /* mask for valid bits of the value */ - -/* first firmware register */ -#define ENE_FW1 0xF8F8 +#define ENE_IO_SIZE 4 + +/* 8 bytes of samples, divided in 2 packets*/ +#define ENE_FW_SAMPLE_BUFFER 0xF8F0 /* sample buffer */ +#define ENE_FW_SAMPLE_SPACE 0x80 /* sample is space */ +#define ENE_FW_PACKET_SIZE 4 + +/* first firmware flag register */ +#define ENE_FW1 0xF8F8 /* flagr */ #define ENE_FW1_ENABLE 0x01 /* enable fw processing */ #define ENE_FW1_TXIRQ 0x02 /* TX interrupt pending */ +#define ENE_FW1_HAS_EXTRA_BUF 0x04 /* fw uses extra buffer*/ +#define ENE_FW1_EXTRA_BUF_HND 0x08 /* extra buffer handshake bit*/ +#define ENE_FW1_LED_ON 0x10 /* turn on a led */ + +#define ENE_FW1_WPATTERN 0x20 /* enable wake pattern */ #define ENE_FW1_WAKE 0x40 /* enable wake from S3 */ #define ENE_FW1_IRQ 0x80 /* enable interrupt */ -/* second firmware register */ -#define ENE_FW2 0xF8F9 -#define ENE_FW2_BUF_HIGH 0x01 /* which half of the buffer to read */ -#define ENE_FW2_IRQ_CLR 0x04 /* clear this on IRQ */ -#define ENE_FW2_GP40_AS_LEARN 0x08 /* normal input is used as */ - /* learning input */ -#define ENE_FW2_FAN_AS_NRML_IN 0x40 /* fan is used as normal input */ +/* second firmware flag register */ +#define ENE_FW2 0xF8F9 /* flagw */ +#define ENE_FW2_BUF_WPTR 0x01 /* which half of the buffer to read */ +#define ENE_FW2_RXIRQ 0x04 /* RX IRQ pending*/ +#define ENE_FW2_GP0A 0x08 /* Use GPIO0A for demodulated input */ +#define ENE_FW2_EMMITER1_CONN 0x10 /* TX emmiter 1 connected */ +#define ENE_FW2_EMMITER2_CONN 0x20 /* TX emmiter 2 connected */ + +#define ENE_FW2_FAN_INPUT 0x40 /* fan input used for demodulated data*/ #define ENE_FW2_LEARNING 0x80 /* hardware supports learning and TX */ +/* firmware RX pointer for new style buffer */ +#define ENE_FW_RX_POINTER 0xF8FA + +/* high parts of samples for fan input (8 samples)*/ +#define ENE_FW_SMPL_BUF_FAN 0xF8FB +#define ENE_FW_SMPL_BUF_FAN_PLS 0x8000 /* combined sample is pulse */ +#define ENE_FW_SMPL_BUF_FAN_MSK 0x0FFF /* combined sample maximum value */ +#define ENE_FW_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */ + /* transmitter ports */ -#define ENE_TX_PORT2 0xFC01 /* this enables one or both */ -#define ENE_TX_PORT2_EN 0x20 /* TX ports */ -#define ENE_TX_PORT1 0xFC08 -#define ENE_TX_PORT1_EN 0x02 +#define ENE_GPIOFS1 0xFC01 +#define ENE_GPIOFS1_GPIO0D 0x20 /* enable tx output on GPIO0D */ +#define ENE_GPIOFS8 0xFC08 +#define ENE_GPIOFS8_GPIO41 0x02 /* enable tx output on GPIO40 */ /* IRQ registers block (for revision B) */ #define ENEB_IRQ 0xFD09 /* IRQ number */ @@ -70,97 +77,99 @@ #define ENEB_IRQ_STATUS 0xFD80 /* irq status */ #define ENEB_IRQ_STATUS_IR 0x20 /* IR irq */ -/* fan as input settings - only if learning capable */ +/* fan as input settings */ #define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */ #define ENE_FAN_AS_IN1_EN 0xCD #define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */ #define ENE_FAN_AS_IN2_EN 0x03 -#define ENE_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */ /* IRQ registers block (for revision C,D) */ -#define ENEC_IRQ 0xFE9B /* new irq settings register */ -#define ENEC_IRQ_MASK 0x0F /* irq number mask */ -#define ENEC_IRQ_UNK_EN 0x10 /* always enabled */ -#define ENEC_IRQ_STATUS 0x20 /* irq status and ACK */ - -/* CIR block settings */ -#define ENE_CIR_CONF1 0xFEC0 -#define ENE_CIR_CONF1_TX_CLEAR 0x01 /* clear that on revC */ - /* while transmitting */ -#define ENE_CIR_CONF1_RX_ON 0x07 /* normal receiver enabled */ -#define ENE_CIR_CONF1_LEARN1 0x08 /* enabled on learning mode */ -#define ENE_CIR_CONF1_TX_ON 0x30 /* enabled on transmit */ -#define ENE_CIR_CONF1_TX_CARR 0x80 /* send TX carrier or not */ - -#define ENE_CIR_CONF2 0xFEC1 /* unknown setting = 0 */ -#define ENE_CIR_CONF2_LEARN2 0x10 /* set on enable learning */ -#define ENE_CIR_CONF2_GPIO40DIS 0x20 /* disable input via gpio40 */ - -#define ENE_CIR_SAMPLE_PERIOD 0xFEC8 /* sample period in us */ -#define ENE_CIR_SAMPLE_OVERFLOW 0x80 /* interrupt on overflows if set */ - - -/* Two byte tx buffer */ -#define ENE_TX_INPUT1 0xFEC9 -#define ENE_TX_INPUT2 0xFECA -#define ENE_TX_PULSE_MASK 0x80 /* Transmitted sample is pulse */ -#define ENE_TX_SMLP_MASK 0x7F -#define ENE_TX_SMPL_PERIOD 50 /* transmit sample period - fixed */ +#define ENE_IRQ 0xFE9B /* new irq settings register */ +#define ENE_IRQ_MASK 0x0F /* irq number mask */ +#define ENE_IRQ_UNK_EN 0x10 /* always enabled */ +#define ENE_IRQ_STATUS 0x20 /* irq status and ACK */ + +/* CIR Config register #1 */ +#define ENE_CIRCFG 0xFEC0 +#define ENE_CIRCFG_RX_EN 0x01 /* RX enable */ +#define ENE_CIRCFG_RX_IRQ 0x02 /* Enable hardware interrupt */ +#define ENE_CIRCFG_REV_POL 0x04 /* Input polarity reversed */ +#define ENE_CIRCFG_CARR_DEMOD 0x08 /* Enable carrier demodulator */ + +#define ENE_CIRCFG_TX_EN 0x10 /* TX enable */ +#define ENE_CIRCFG_TX_IRQ 0x20 /* Send interrupt on TX done */ +#define ENE_CIRCFG_TX_POL_REV 0x40 /* TX polarity reversed */ +#define ENE_CIRCFG_TX_CARR 0x80 /* send TX carrier or not */ + +/* CIR config register #2 */ +#define ENE_CIRCFG2 0xFEC1 +#define ENE_CIRCFG2_RLC 0x00 +#define ENE_CIRCFG2_RC5 0x01 +#define ENE_CIRCFG2_RC6 0x02 +#define ENE_CIRCFG2_NEC 0x03 +#define ENE_CIRCFG2_CARR_DETECT 0x10 /* Enable carrier detection */ +#define ENE_CIRCFG2_GPIO0A 0x20 /* Use GPIO0A instead of GPIO40 for input */ +#define ENE_CIRCFG2_FAST_SAMPL1 0x40 /* Fast leading pulse detection for RC6 */ +#define ENE_CIRCFG2_FAST_SAMPL2 0x80 /* Fast data detection for RC6 */ + +/* Knobs for protocol decoding - will document when/if will use them */ +#define ENE_CIRPF 0xFEC2 +#define ENE_CIRHIGH 0xFEC3 +#define ENE_CIRBIT 0xFEC4 +#define ENE_CIRSTART 0xFEC5 +#define ENE_CIRSTART2 0xFEC6 + +/* Actual register which contains RLC RX data - read by firmware */ +#define ENE_CIRDAT_IN 0xFEC7 + + +/* RLC configuration - sample period (1us resulution) + idle mode */ +#define ENE_CIRRLC_CFG 0xFEC8 +#define ENE_CIRRLC_CFG_OVERFLOW 0x80 /* interrupt on overflows if set */ +#define ENE_DEFAULT_SAMPLE_PERIOD 50 + +/* Two byte RLC TX buffer */ +#define ENE_CIRRLC_OUT0 0xFEC9 +#define ENE_CIRRLC_OUT1 0xFECA +#define ENE_CIRRLC_OUT_PULSE 0x80 /* Transmitted sample is pulse */ +#define ENE_CIRRLC_OUT_MASK 0x7F + + +/* Carrier detect setting + * Low nibble - number of carrier pulses to average + * High nibble - number of initial carrier pulses to discard + */ +#define ENE_CIRCAR_PULS 0xFECB +/* detected RX carrier period (resolution: 500 ns) */ +#define ENE_CIRCAR_PRD 0xFECC +#define ENE_CIRCAR_PRD_VALID 0x80 /* data valid content valid */ -/* Unknown TX setting - TX sample period ??? */ -#define ENE_TX_UNK1 0xFECB /* set to 0x63 */ +/* detected RX carrier pulse width (resolution: 500 ns) */ +#define ENE_CIRCAR_HPRD 0xFECD -/* Current received carrier period */ -#define ENE_RX_CARRIER 0xFECC /* RX period (500 ns) */ -#define ENE_RX_CARRIER_VALID 0x80 /* Register content valid */ +/* TX period (resolution: 500 ns, minimum 2)*/ +#define ENE_CIRMOD_PRD 0xFECE +#define ENE_CIRMOD_PRD_POL 0x80 /* TX carrier polarity*/ +#define ENE_CIRMOD_PRD_MAX 0x7F /* 15.87 kHz */ +#define ENE_CIRMOD_PRD_MIN 0x02 /* 1 Mhz */ -/* TX period (1/carrier) */ -#define ENE_TX_PERIOD 0xFECE /* TX period (500 ns) */ -#define ENE_TX_PERIOD_UNKBIT 0x80 /* This bit set on transmit*/ -#define ENE_TX_PERIOD_PULSE 0xFECF /* TX pulse period (500 ns)*/ +/* TX pulse width (resolution: 500 ns)*/ +#define ENE_CIRMOD_HPRD 0xFECF /* Hardware versions */ -#define ENE_HW_VERSION 0xFF00 /* hardware revision */ +#define ENE_ECHV 0xFF00 /* hardware revision */ #define ENE_PLLFRH 0xFF16 #define ENE_PLLFRL 0xFF17 +#define ENE_DEFAULT_PLL_FREQ 1000 -#define ENE_HW_UNK 0xFF1D -#define ENE_HW_UNK_CLR 0x04 -#define ENE_HW_VER_MAJOR 0xFF1E /* chip version */ -#define ENE_HW_VER_MINOR 0xFF1F -#define ENE_HW_VER_OLD 0xFD00 - -/* Normal/Learning carrier ranges - only valid if we have learning input*/ -/* TODO: test */ -#define ENE_NORMAL_RX_LOW 34 -#define ENE_NORMAL_RX_HI 38 +#define ENE_ECSTS 0xFF1D +#define ENE_ECSTS_RSRVD 0x04 -/* Tx carrier range */ -/* Hardware might be able to do more, but this range is enough for - all purposes */ -#define ENE_TX_PERIOD_MAX 32 /* corresponds to 29.4 kHz */ -#define ENE_TX_PERIOD_MIN 16 /* corrsponds to 62.5 kHz */ - - - -/* Minimal and maximal gaps */ - -/* Normal case: - Minimal gap is 0x7F * sample period - Maximum gap depends on hardware. - For KB3926B, it is unlimited, for newer models its around - 250000, after which HW stops sending samples, and that is - not possible to change */ - -/* Fan case: - Both minimal and maximal gaps are same, and equal to 0xFFF * 0x61 - And there is nothing to change this setting -*/ - -#define ENE_MAXGAP 250000 -#define ENE_MINGAP (127 * sample_period) +#define ENE_ECVER_MAJOR 0xFF1E /* chip version */ +#define ENE_ECVER_MINOR 0xFF1F +#define ENE_HW_VER_OLD 0xFD00 /******************************************************************************/ @@ -171,46 +180,60 @@ #define ENE_HW_B 1 /* 3926B */ #define ENE_HW_C 2 /* 3926C */ -#define ENE_HW_D 3 /* 3926D */ +#define ENE_HW_D 3 /* 3926D or later */ #define ene_printk(level, text, ...) \ - printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__) + printk(level ENE_DRIVER_NAME ": " text "\n", ## __VA_ARGS__) -#define ene_dbg(text, ...) \ - if (debug) \ - printk(KERN_DEBUG \ - ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__) +#define ene_notice(text, ...) ene_printk(KERN_NOTICE, text, ## __VA_ARGS__) +#define ene_warn(text, ...) ene_printk(KERN_WARNING, text, ## __VA_ARGS__) -#define ene_dbg_verbose(text, ...) \ - if (debug > 1) \ - printk(KERN_DEBUG \ - ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__) +#define __dbg(level, format, ...) \ + do { \ + if (debug >= level) \ + printk(KERN_DEBUG ENE_DRIVER_NAME \ + ": " format "\n", ## __VA_ARGS__); \ + } while (0) + + +#define dbg(format, ...) __dbg(1, format, ## __VA_ARGS__) +#define dbg_verbose(format, ...) __dbg(2, format, ## __VA_ARGS__) +#define dbg_regs(format, ...) __dbg(3, format, ## __VA_ARGS__) + +#define MS_TO_NS(msec) ((msec) * 1000) struct ene_device { struct pnp_dev *pnp_dev; struct input_dev *idev; struct ir_dev_props *props; - int in_use; /* hw IO settings */ - unsigned long hw_io; + long hw_io; int irq; spinlock_t hw_lock; /* HW features */ int hw_revision; /* hardware revision */ - bool hw_learning_and_tx_capable; /* learning capable */ - bool hw_gpio40_learning; /* gpio40 is learning */ - bool hw_fan_as_normal_input; /* fan input is used as */ - /* regular input */ + bool hw_use_gpio_0a; /* gpio40 is demodulated input*/ + bool hw_extra_buffer; /* hardware has 'extra buffer' */ + bool hw_fan_input; /* fan input is IR data source */ + bool hw_learning_and_tx_capable; /* learning & tx capable */ + int pll_freq; + int buffer_len; + + /* Extra RX buffer location */ + int extra_buf1_address; + int extra_buf1_len; + int extra_buf2_address; + int extra_buf2_len; + /* HW state*/ - int rx_pointer; /* hw pointer to rx buffer */ + int r_pointer; /* pointer to next sample to read */ + int w_pointer; /* pointer to next sample hw will write */ bool rx_fan_input_inuse; /* is fan input in use for rx*/ int tx_reg; /* current reg used for TX */ u8 saved_conf1; /* saved FEC0 reg */ - - /* TX sample handling */ unsigned int tx_sample; /* current sample for TX */ bool tx_sample_pulse; /* current sample is pulse */ @@ -232,4 +255,8 @@ struct ene_device { bool learning_enabled; /* learning input enabled */ bool carrier_detect_enabled; /* carrier detect enabled */ int rx_period_adjust; + bool rx_enabled; }; + +static int ene_irq_status(struct ene_device *dev); +static void ene_read_hw_pointer(struct ene_device *dev);