From patchwork Thu Nov 11 11:58:01 2010 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: mems applications X-Patchwork-Id: 317202 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id oABBvknk026433 for ; Thu, 11 Nov 2010 11:58:09 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755909Ab0KKL6I (ORCPT ); Thu, 11 Nov 2010 06:58:08 -0500 Received: from eu1sys200aog115.obsmtp.com ([207.126.144.139]:40340 "EHLO eu1sys200aog115.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753593Ab0KKL6G (ORCPT ); Thu, 11 Nov 2010 06:58:06 -0500 Received: from source ([164.129.1.35]) (using TLSv1) by eu1sys200aob115.postini.com ([207.126.147.11]) with SMTP ID DSNKTNvaSq6r1wY6l+ZwGiH5/Wjs+4uq/pTu@postini.com; Thu, 11 Nov 2010 11:58:05 UTC Received: from zeta.dmz-eu.st.com (ns2.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 3274F88; Thu, 11 Nov 2010 11:58:02 +0000 (GMT) Received: from mail7.sgp.st.com (mail7.sgp.st.com [164.129.223.81]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id F352C25E3; Thu, 11 Nov 2010 11:58:01 +0000 (GMT) Received: from localhost (pcmail10642.cto.st.com [164.130.106.42]) by mail7.sgp.st.com (MOS 4.1.8-GA) with ESMTP id AGY88623 (AUTH "mems applications"); Thu, 11 Nov 2010 12:58:01 +0100 From: mems applications To: dmitry.torokhov@gmail.com Cc: carmine.iascone@st.com, matteo.dameno@st.com, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH] input: misc: add lis331dlh driver Date: Thu, 11 Nov 2010 12:58:01 +0100 Message-Id: <1289476681-15983-1-git-send-email-carmine.iascone@st.com> X-Mailer: git-send-email 1.5.4.3 In-Reply-To: <> References: <> Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.3 (demeter1.kernel.org [140.211.167.41]); Thu, 11 Nov 2010 11:58:09 +0000 (UTC) diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index b99b8cb..eb58bd3 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -448,4 +448,11 @@ config INPUT_ADXL34X_SPI To compile this driver as a module, choose M here: the module will be called adxl34x-spi. +config INPUT_LIS331DLH + tristate "STMicroelectronics LIS331DLH Accelerometer" + depends on I2C + ---help--- + If you say yes here you get support for the STMicroelectronics + LIS331DLH accelerometer sensor + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 1fe1f6c..819e1a3 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o +obj-$(CONFIG_INPUT_LIS331DLH) += lis331dlh.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o @@ -42,4 +43,3 @@ obj-$(CONFIG_INPUT_WINBOND_CIR) += winbond-cir.o obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o obj-$(CONFIG_INPUT_YEALINK) += yealink.o - diff --git a/drivers/input/misc/lis331dlh.c b/drivers/input/misc/lis331dlh.c new file mode 100644 index 0000000..2b72c12 --- /dev/null +++ b/drivers/input/misc/lis331dlh.c @@ -0,0 +1,836 @@ +/******************** (C) COPYRIGHT 2010 STMicroelectronics ******************** +* +* File Name : lis331dlh.c +* Authors : MSH - Motion Mems BU - Application Team +* : Carmine Iascone (carmine.iascone@st.com) +* : Matteo Dameno (matteo.dameno@st.com) +* Version : V 1.0.0 +* Date : 08/11/2010 +* Description : LIS331DLH sensor API +* +******************************************************************************** +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* THE PRESENT SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES +* OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, FOR THE SOLE +* PURPOSE TO SUPPORT YOUR APPLICATION DEVELOPMENT. +* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +* +* THIS SOFTWARE IS SPECIFICALLY DESIGNED FOR EXCLUSIVE USE WITH ST PARTS. +* +******************************************************************************/ +#include "lis331dlh.h" + +#include +#include +#include +#include + + +#define LIS331DLH_DEV_NAME "lis331dlh" + +/** Maximum polled-device-reported g value */ +#define G_MAX 8000 + +#define SHIFT_ADJ_2G 4 +#define SHIFT_ADJ_4G 3 +#define SHIFT_ADJ_8G 2 + +#define AXISDATA_REG 0x28 + +/* ctrl 1: pm2 pm1 pm0 dr1 dr0 zenable yenable zenable */ +#define CTRL_REG1 0x20 /* power control reg */ +#define CTRL_REG2 0x21 /* power control reg */ +#define CTRL_REG3 0x22 /* power control reg */ +#define CTRL_REG4 0x23 /* interrupt control reg */ + +#define FUZZ 0 +#define FLAT 0 +#define I2C_RETRY_DELAY 5 +#define I2C_RETRIES 5 +#define AUTO_INCREMENT 0x80 + +static struct { + unsigned int cutoff; + unsigned int mask; +} odr_table[] = { + { + 3, LIS331DLH_PM_NORMAL | LIS331DLH_ODR1000}, { + 10, LIS331DLH_PM_NORMAL | LIS331DLH_ODR400}, { + 20, LIS331DLH_PM_NORMAL | LIS331DLH_ODR100}, { + 100, LIS331DLH_PM_NORMAL | LIS331DLH_ODR50}, { + 200, LIS331DLH_ODR1000 | LIS331DLH_ODR10}, { + 500, LIS331DLH_ODR1000 | LIS331DLH_ODR5}, { + 1000, LIS331DLH_ODR1000 | LIS331DLH_ODR2}, { + 2000, LIS331DLH_ODR1000 | LIS331DLH_ODR1}, { + 0, LIS331DLH_ODR1000 | LIS331DLH_ODRHALF},}; + +struct lis331dlh_data { + struct i2c_client *client; + struct lis331dlh_platform_data *pdata; + + struct mutex lock; + + struct input_polled_dev *input_poll_dev; + + int hw_initialized; + atomic_t enabled; + int on_before_suspend; + + u8 reg_addr; + + u8 shift_adj; + u8 resume_state[5]; +}; + +/* + * Because misc devices can not carry a pointer from driver register to + * open, we keep this global. This limits the driver to a single instance. + */ +struct lis331dlh_data *lis331dlh_misc_data; + +static int lis331dlh_i2c_read(struct lis331dlh_data *acc, + u8 *buf, int len) +{ + int err; + + struct i2c_msg msgs[] = { + { + .addr = acc->client->addr, + .flags = acc->client->flags & I2C_M_TEN, + .len = 1, + .buf = buf, + }, + { + .addr = acc->client->addr, + .flags = (acc->client->flags & I2C_M_TEN) | I2C_M_RD, + .len = len, + .buf = buf, + }, + }; + + err = i2c_transfer(acc->client->adapter, msgs, 2); + + if (err != 2) { + dev_err(&acc->client->dev, "read transfer error\n"); + err = -EIO; + } else { + err = 0; + } + + return err; +} + +static int lis331dlh_i2c_write(struct lis331dlh_data *acc, + u8 *buf, int len) +{ + int err; + + struct i2c_msg msgs[] = { + { + .addr = acc->client->addr, + .flags = acc->client->flags & I2C_M_TEN, + .len = len + 1, + .buf = buf, + }, + }; + + err = i2c_transfer(acc->client->adapter, msgs, 1); + + if (err != 1) { + dev_err(&acc->client->dev, "write transfer error\n"); + err = -EIO; + } else { + err = 0; + } + + return err; +} + +static int lis331dlh_hw_init(struct lis331dlh_data *acc) +{ + int err = -1; + u8 buf[6]; + + buf[0] = (AUTO_INCREMENT | CTRL_REG1); + buf[1] = acc->resume_state[0]; + buf[2] = acc->resume_state[1]; + buf[3] = acc->resume_state[2]; + buf[4] = acc->resume_state[3]; + buf[5] = acc->resume_state[4]; + err = lis331dlh_i2c_write(acc, buf, 5); + if (err < 0) + return err; + + acc->hw_initialized = 1; + + return 0; +} + +static void lis331dlh_device_power_off(struct lis331dlh_data *acc) +{ + int err; + u8 buf[2] = { CTRL_REG1, + LIS331DLH_PM_OFF | LIS331DLH_ENABLE_ALL_AXES }; + + err = lis331dlh_i2c_write(acc, buf, 1); + if (err < 0) + dev_err(&acc->client->dev, "soft power off failed\n"); + + if (acc->pdata->power_off) + acc->pdata->power_off(); + + acc->hw_initialized = 0; + +} + +static int lis331dlh_device_power_on(struct lis331dlh_data *acc) +{ + int err; + + if (acc->pdata->power_on) { + err = acc->pdata->power_on(); + if (err < 0) + return err; + } + + if (!acc->hw_initialized) { + err = lis331dlh_hw_init(acc); + if (err < 0) { + lis331dlh_device_power_off(acc); + return err; + } + } + + return 0; +} + +int lis331dlh_update_g_range(struct lis331dlh_data *acc, u8 new_g_range) +{ + int err; + u8 shift; + u8 buf[2]; + switch (new_g_range) { + case LIS331DLH_G_2G: + shift = SHIFT_ADJ_2G; + break; + case LIS331DLH_G_4G: + shift = SHIFT_ADJ_4G; + break; + case LIS331DLH_G_8G: + shift = SHIFT_ADJ_8G; + break; + default: + return -EINVAL; + } + + if (atomic_read(&acc->enabled)) { + /* Set configuration register 4, which contains g range setting + * NOTE: this is a straight overwrite because this driver does + * not use any of the other configuration bits in this + * register. Should this become untrue, we will have to read + * out the value and only change the relevant bits --XX---- + * (marked by X) */ + buf[0] = CTRL_REG4; + buf[1] = new_g_range; + err = lis331dlh_i2c_write(acc, buf, 1); + if (err < 0) + return err; + } + + acc->resume_state[3] = new_g_range; + acc->shift_adj = shift; + + return 0; +} + +int lis331dlh_update_odr(struct lis331dlh_data *acc, int poll_interval) +{ + int err = -1; + int i; + u8 config[2]; + + /* Convert the poll interval into an output data rate configuration + * that is as low as possible. The ordering of these checks must be + * maintained due to the cascading cut off values - poll intervals are + * checked from shortest to longest. At each check, if the next lower + * ODR cannot support the current poll interval, we stop searching */ + for (i = 0; i < ARRAY_SIZE(odr_table); i++) { + config[1] = odr_table[i].mask; + if (poll_interval < odr_table[i].cutoff) + break; + } + + config[1] |= LIS331DLH_ENABLE_ALL_AXES; + + /* If device is currently enabled, we need to write new + * configuration out to it */ + if (atomic_read(&acc->enabled)) { + config[0] = CTRL_REG1; + err = lis331dlh_i2c_write(acc, config, 1); + if (err < 0) + return err; + } + + acc->resume_state[0] = config[1]; + + return 0; +} + +static int decode(u8 *p, int adj) +{ + s16 v = p[0] | (p[1] << 8); + return (int) v >> adj; +} + +static int lis331dlh_get_data(struct lis331dlh_data *acc, + int *xyz) +{ + int err = -1; + /* Data bytes from hardware xL, xH, yL, yH, zL, zH */ + u8 acc_data[6]; + /* x,y,z hardware data */ + int hw_d[3] = { 0 }; + + acc_data[0] = (AUTO_INCREMENT | AXISDATA_REG); + err = lis331dlh_i2c_read(acc, acc_data, 6); + if (err < 0) + return err; + + hw_d[0] = decode(acc_data, acc->shift_adj); + hw_d[1] = decode(acc_data + 2, acc->shift_adj); + hw_d[2] = decode(acc_data + 4, acc->shift_adj); + + xyz[0] = ((acc->pdata->negate_x) ? (-hw_d[acc->pdata->axis_map_x]) + : (hw_d[acc->pdata->axis_map_x])); + xyz[1] = ((acc->pdata->negate_y) ? (-hw_d[acc->pdata->axis_map_y]) + : (hw_d[acc->pdata->axis_map_y])); + xyz[2] = ((acc->pdata->negate_z) ? (-hw_d[acc->pdata->axis_map_z]) + : (hw_d[acc->pdata->axis_map_z])); + + return err; +} + +static void lis331dlh_report_values(struct lis331dlh_data *acc, + int *xyz) +{ + struct input_dev *input = acc->input_poll_dev->input; + input_report_abs(input, ABS_X, xyz[0]); + input_report_abs(input, ABS_Y, xyz[1]); + input_report_abs(input, ABS_Z, xyz[2]); + input_sync(input); +} + +static int lis331dlh_enable(struct lis331dlh_data *acc) +{ + int err; + + if (!atomic_cmpxchg(&acc->enabled, 0, 1)) { + + err = lis331dlh_device_power_on(acc); + if (err < 0) { + atomic_set(&acc->enabled, 0); + return err; + } + } + + return 0; +} + +static int lis331dlh_disable(struct lis331dlh_data *acc) +{ + if (atomic_cmpxchg(&acc->enabled, 1, 0)) + lis331dlh_device_power_off(acc); + + return 0; +} + +static ssize_t attr_get_polling_rate(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct lis331dlh_data *acc = dev_get_drvdata(dev); + int val; + mutex_lock(&acc->lock); + val = acc->pdata->poll_interval; + mutex_unlock(&acc->lock); + return sprintf(buf, "%d\n", val); +} + +static ssize_t attr_set_polling_rate(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct lis331dlh_data *acc = dev_get_drvdata(dev); + unsigned long interval_ms; + + if (strict_strtoul(buf, 10, &interval_ms)) + return -EINVAL; + if (!interval_ms) + return -EINVAL; + mutex_lock(&acc->lock); + acc->pdata->poll_interval = interval_ms; + lis331dlh_update_odr(acc, interval_ms); + mutex_unlock(&acc->lock); + return size; +} + +static ssize_t attr_get_range(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lis331dlh_data *acc = dev_get_drvdata(dev); + char range; + char val; + mutex_lock(&acc->lock); + val = acc->pdata->g_range ; + switch (val) { + case LIS331DLH_G_2G: + range = 2; + break; + case LIS331DLH_G_4G: + range = 4; + break; + case LIS331DLH_G_8G: + range = 8; + break; + default: + range = 2; + break; + } + mutex_unlock(&acc->lock); + return sprintf(buf, "%d\n", range); +} + +static ssize_t attr_set_range(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct lis331dlh_data *acc = dev_get_drvdata(dev); + unsigned long val; + if (strict_strtoul(buf, 10, &val)) + return -EINVAL; + mutex_lock(&acc->lock); + acc->pdata->g_range = val; + lis331dlh_update_g_range(acc, val); + mutex_unlock(&acc->lock); + return size; +} + +static ssize_t attr_get_enable(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lis331dlh_data *acc = dev_get_drvdata(dev); + int val = atomic_read(&acc->enabled); + return sprintf(buf, "%d\n", val); +} + +static ssize_t attr_set_enable(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct lis331dlh_data *acc = dev_get_drvdata(dev); + unsigned long val; + + if (strict_strtoul(buf, 10, &val)) + return -EINVAL; + + if (val) + lis331dlh_enable(acc); + else + lis331dlh_disable(acc); + + return size; +} + +static ssize_t attr_reg_set(struct device *dev, struct device_attribute *attr, + const char *buf, size_t size) +{ + int rc; + struct lis331dlh_data *acc = dev_get_drvdata(dev); + u8 x[2]; + unsigned long val; + + if (strict_strtoul(buf, 16, &val)) + return -EINVAL; + mutex_lock(&acc->lock); + x[0] = acc->reg_addr; + mutex_unlock(&acc->lock); + x[1] = val; + rc = lis331dlh_i2c_write(acc, x, 1); + return size; +} + +static ssize_t attr_reg_get(struct device *dev, struct device_attribute *attr, + char *buf) +{ + ssize_t ret; + struct lis331dlh_data *acc = dev_get_drvdata(dev); + int rc; + u8 data; + + mutex_lock(&acc->lock); + data = acc->reg_addr; + mutex_unlock(&acc->lock); + rc = lis331dlh_i2c_read(acc, &data, 1); + ret = sprintf(buf, "0x%02x\n", data); + return ret; +} + +static ssize_t attr_addr_set(struct device *dev, struct device_attribute *attr, + const char *buf, size_t size) +{ + struct lis331dlh_data *acc = dev_get_drvdata(dev); + unsigned long val; + if (strict_strtoul(buf, 16, &val)) + return -EINVAL; + mutex_lock(&acc->lock); + acc->reg_addr = val; + mutex_unlock(&acc->lock); + return size; +} + +static struct device_attribute attributes[] = { + __ATTR(pollrate_ms, 0666, attr_get_polling_rate, attr_set_polling_rate), + __ATTR(range, 0666, attr_get_range, attr_set_range), + __ATTR(enable, 0666, attr_get_enable, attr_set_enable), + __ATTR(reg_value, 0600, attr_reg_get, attr_reg_set), + __ATTR(reg_addr, 0200, NULL, attr_addr_set), +}; + +static int create_sysfs_interfaces(struct device *dev) +{ + int i; + for (i = 0; i < ARRAY_SIZE(attributes); i++) + if (device_create_file(dev, attributes + i)) + goto error; + return 0; + +error: + for ( ; i >= 0; i--) + device_remove_file(dev, attributes + i); + dev_err(dev, "%s:Unable to create interface\n", __func__); + return -1; +} + +static int remove_sysfs_interfaces(struct device *dev) +{ + int i; + for (i = 0; i < ARRAY_SIZE(attributes); i++) + device_remove_file(dev, attributes + i); + return 0; +} + + +static void lis331dlh_input_poll_func(struct input_polled_dev *dev) +{ + struct lis331dlh_data *acc = dev->private; + + int xyz[3] = { 0 }; + int err; + + /* acc = container_of((struct delayed_work *)work, + struct lis331dlh_data, input_work); */ + + mutex_lock(&acc->lock); + err = lis331dlh_get_data(acc, xyz); + if (err < 0) + dev_err(&acc->client->dev, "get_acceleration_data failed\n"); + else + lis331dlh_report_values(acc, xyz); + + mutex_unlock(&acc->lock); +} + +int lis331dlh_input_open(struct input_dev *input) +{ + struct lis331dlh_data *acc = input_get_drvdata(input); + + return lis331dlh_enable(acc); +} + +void lis331dlh_input_close(struct input_dev *dev) +{ + struct lis331dlh_data *acc = input_get_drvdata(dev); + + lis331dlh_disable(acc); +} + +static int lis331dlh_validate_pdata(struct lis331dlh_data *acc) +{ + acc->pdata->poll_interval = max(acc->pdata->poll_interval, + acc->pdata->min_interval); + + if (acc->pdata->axis_map_x > 2 || + acc->pdata->axis_map_y > 2 || acc->pdata->axis_map_z > 2) { + dev_err(&acc->client->dev, + "invalid axis_map value x:%u y:%u z%u\n", + acc->pdata->axis_map_x, acc->pdata->axis_map_y, + acc->pdata->axis_map_z); + return -EINVAL; + } + + /* Only allow 0 and 1 for negation boolean flag */ + if (acc->pdata->negate_x > 1 || acc->pdata->negate_y > 1 || + acc->pdata->negate_z > 1) { + dev_err(&acc->client->dev, + "invalid negate value x:%u y:%u z:%u\n", + acc->pdata->negate_x, acc->pdata->negate_y, + acc->pdata->negate_z); + return -EINVAL; + } + + /* Enforce minimum polling interval */ + if (acc->pdata->poll_interval < acc->pdata->min_interval) { + dev_err(&acc->client->dev, "minimum poll interval violated\n"); + return -EINVAL; + } + + return 0; +} + +static int lis331dlh_input_init(struct lis331dlh_data *acc) +{ + int err; + struct input_dev *input; + + acc->input_poll_dev = input_allocate_polled_device(); + if (!acc->input_poll_dev) { + err = -ENOMEM; + dev_err(&acc->client->dev, "input device allocate failed\n"); + goto err0; + } + + /* set input-polldev handlers */ + acc->input_poll_dev->private = acc; + acc->input_poll_dev->poll = lis331dlh_input_poll_func; + acc->input_poll_dev->poll_interval = acc->pdata->poll_interval; + + input = acc->input_poll_dev->input; + + input->open = lis331dlh_input_open; + input->close = lis331dlh_input_close; + input->name = LIS331DLH_DEV_NAME; + input->id.bustype = BUS_I2C; + input->dev.parent = &acc->client->dev; + + input_set_drvdata(acc->input_poll_dev->input, acc); + + set_bit(EV_ABS, input->evbit); + + input_set_abs_params(input, ABS_X, -G_MAX, G_MAX, FUZZ, FLAT); + input_set_abs_params(input, ABS_Y, -G_MAX, G_MAX, FUZZ, FLAT); + input_set_abs_params(input, ABS_Z, -G_MAX, G_MAX, FUZZ, FLAT); + + input->name = "accelerometer"; + + err = input_register_polled_device(acc->input_poll_dev); + if (err) { + dev_err(&acc->client->dev, + "unable to register input polled device %s\n", + acc->input_poll_dev->input->name); + goto err1; + } + + return 0; + +err1: + input_free_polled_device(acc->input_poll_dev); +err0: + return err; +} + +static void lis331dlh_input_cleanup(struct lis331dlh_data *acc) +{ + input_unregister_polled_device(acc->input_poll_dev); + input_free_polled_device(acc->input_poll_dev); +} + +static int lis331dlh_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lis331dlh_data *acc; + int err = -1; + + if (client->dev.platform_data == NULL) { + dev_err(&client->dev, "platform data is NULL. exiting.\n"); + err = -ENODEV; + goto err0; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "client not i2c capable\n"); + err = -ENODEV; + goto err0; + } + + acc = kzalloc(sizeof(*acc), GFP_KERNEL); + if (acc == NULL) { + dev_err(&client->dev, + "failed to allocate memory for module data\n"); + err = -ENOMEM; + goto err0; + } + + mutex_init(&acc->lock); + mutex_lock(&acc->lock); + acc->client = client; + + acc->pdata = kmalloc(sizeof(*acc->pdata), GFP_KERNEL); + if (acc->pdata == NULL) + goto err1; + + memcpy(acc->pdata, client->dev.platform_data, sizeof(*acc->pdata)); + + err = lis331dlh_validate_pdata(acc); + if (err < 0) { + dev_err(&client->dev, "failed to validate platform data\n"); + goto err1_1; + } + + i2c_set_clientdata(client, acc); + + if (acc->pdata->init) { + err = acc->pdata->init(); + if (err < 0) + goto err1_1; + } + + memset(acc->resume_state, 0, ARRAY_SIZE(acc->resume_state)); + + acc->resume_state[0] = 0x27; + acc->resume_state[1] = 0x00; + acc->resume_state[2] = 0x00; + acc->resume_state[3] = 0x00; + acc->resume_state[4] = 0x00; + + err = lis331dlh_device_power_on(acc); + if (err < 0) + goto err2; + + atomic_set(&acc->enabled, 1); + + err = lis331dlh_update_g_range(acc, acc->pdata->g_range); + if (err < 0) { + dev_err(&client->dev, "update_g_range failed\n"); + goto err2; + } + + err = lis331dlh_update_odr(acc, acc->pdata->poll_interval); + if (err < 0) { + dev_err(&client->dev, "update_odr failed\n"); + goto err2; + } + + err = lis331dlh_input_init(acc); + if (err < 0) + goto err3; + + err = create_sysfs_interfaces(&client->dev); + if (err < 0) { + dev_err(&client->dev, "lsm_acc_device register failed\n"); + goto err4; + } + + lis331dlh_device_power_off(acc); + + /* As default, do not report information */ + atomic_set(&acc->enabled, 0); + + mutex_unlock(&acc->lock); + + dev_info(&client->dev, "lis331dlh probed\n"); + + return 0; + +err4: + lis331dlh_input_cleanup(acc); +err3: + lis331dlh_device_power_off(acc); +err2: + if (acc->pdata->exit) + acc->pdata->exit(); +err1_1: + mutex_unlock(&acc->lock); + kfree(acc->pdata); +err1: + kfree(acc); +err0: + return err; +} + +static int __devexit lis331dlh_remove(struct i2c_client *client) +{ + /* TODO: revisit ordering here once _probe order is finalized */ + struct lis331dlh_data *acc = i2c_get_clientdata(client); + lis331dlh_input_cleanup(acc); + lis331dlh_device_power_off(acc); + remove_sysfs_interfaces(&client->dev); + if (acc->pdata->exit) + acc->pdata->exit(); + kfree(acc->pdata); + kfree(acc); + + return 0; +} + +static int lis331dlh_resume(struct i2c_client *client) +{ + struct lis331dlh_data *acc = i2c_get_clientdata(client); + + if (acc->on_before_suspend) + return lis331dlh_enable(acc); + return 0; +} + +static int lis331dlh_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct lis331dlh_data *acc = i2c_get_clientdata(client); + + acc->on_before_suspend = atomic_read(&acc->enabled); + return lis331dlh_disable(acc); +} + +static const struct i2c_device_id lis331dlh_id[] = { + {LIS331DLH_DEV_NAME, 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, lis331dlh_id); + +static struct i2c_driver lis331dlh_driver = { + .driver = { + .name = LIS331DLH_DEV_NAME, + .owner = THIS_MODULE, + }, + .probe = lis331dlh_probe, + .remove = __devexit_p(lis331dlh_remove), + .resume = lis331dlh_resume, + .suspend = lis331dlh_suspend, + .id_table = lis331dlh_id, +}; + +static int __init lis331dlh_init(void) +{ + pr_debug("LIS331DLH driver for the accelerometer part\n"); + return i2c_add_driver(&lis331dlh_driver); +} + +static void __exit lis331dlh_exit(void) +{ + i2c_del_driver(&lis331dlh_driver); + return; +} + +module_init(lis331dlh_init); +module_exit(lis331dlh_exit); + +MODULE_DESCRIPTION("lis331dlh accelerometer driver"); +MODULE_AUTHOR("STMicroelectronics"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/input/misc/lis331dlh.h b/drivers/input/misc/lis331dlh.h new file mode 100644 index 0000000..4ea008a --- /dev/null +++ b/drivers/input/misc/lis331dlh.h @@ -0,0 +1,83 @@ +/******************** (C) COPYRIGHT 2010 STMicroelectronics ******************** +* +* File Name : lis331dlh.h +* Authors : MSH - Motion Mems BU - Application Team +* : Carmine Iascone (carmine.iascone@st.com) +* : Matteo Dameno (matteo.dameno@st.com) +* Version : V 1.0.0 +* Date : 08/11/2010 +* Description : LIS331DLH sensor API +* +******************************************************************************** +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* THE PRESENT SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES +* OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, FOR THE SOLE +* PURPOSE TO SUPPORT YOUR APPLICATION DEVELOPMENT. +* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +* +* THIS SOFTWARE IS SPECIFICALLY DESIGNED FOR EXCLUSIVE USE WITH ST PARTS. +* +*******************************************************************************/ + +#ifndef __LIS331DLH_H__ +#define __LIS331DLH_H__ + +#include + +/************************************************/ +/* Accelerometer section defines */ +/************************************************/ + +/* Accelerometer Sensor Full Scale */ +#define LIS331DLH_G_2G 0x00 +#define LIS331DLH_G_4G 0x10 +#define LIS331DLH_G_8G 0x30 + +/* Accelerometer Sensor Operating Mode */ +#define LIS331DLH_PM_OFF 0x00 +#define LIS331DLH_PM_NORMAL 0x20 +#define LIS331DLH_ENABLE_ALL_AXES 0x07 + +/* Accelerometer output data rate */ +#define LIS331DLH_ODRHALF 0x40 /* 0.5Hz output data rate */ +#define LIS331DLH_ODR1 0x60 /* 1Hz output data rate */ +#define LIS331DLH_ODR2 0x80 /* 2Hz output data rate */ +#define LIS331DLH_ODR5 0xA0 /* 5Hz output data rate */ +#define LIS331DLH_ODR10 0xC0 /* 10Hz output data rate */ +#define LIS331DLH_ODR50 0x00 /* 50Hz output data rate */ +#define LIS331DLH_ODR100 0x08 /* 100Hz output data rate */ +#define LIS331DLH_ODR400 0x10 /* 400Hz output data rate */ +#define LIS331DLH_ODR1000 0x18 /* 1000Hz output data rate */ + +#ifdef __KERNEL__ +struct lis331dlh_platform_data { + + int poll_interval; + int min_interval; + + u8 g_range; + + u8 axis_map_x; + u8 axis_map_y; + u8 axis_map_z; + + u8 negate_x; + u8 negate_y; + u8 negate_z; + + int (*init)(void); + void (*exit)(void); + int (*power_on)(void); + int (*power_off)(void); + +}; +#endif /* __KERNEL__ */ + +#endif /* __LIS331DLH_H__ */